| Author |
HEELP HELP! K610! |
GULO
Joined: Nov 13, 2007
Posts: 6
PM |
PLZ, bros` help me. I have K610i, but.. it`s dead. i cant turn it on. it`s turned off and happy end when i connect phone with XS++, here is what happen:
22:25:00| Baseband ID: 9900
22:25:00| Hardware Platform: db2020
22:25:00| Protocol Version: 3.1
22:25:07| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:n/a)
22:25:07| ...using GDFS name
22:25:07|
22:25:08| Profiling SEMC phone...
22:25:08| Baseband ID: db2020
22:25:08| OTP CID: 0
22:25:08| EROM CID: 0
22:25:08| EROM Color: Unknown
22:25:08| IMEI:
22:25:08| Phone ID: n/a
22:25:08| Network:
22:25:08| CDA:
22:25:08| Firmware Version:
22:25:08| EROM: n/a
22:25:08|
22:25:08| Ready for operation!
And when I choose MAIN and FS and click Flash:
22:58:02| Cannot open hbC
22:58:02| Error: Cannot send flash loader
22:58:02| ++ Error: Flashing failed
22:58:04| Disconnected... Unplug the phone ((((
I`ve also tried with Davinci, but:
Phone Attached!
Detected SonyEricsson:
K800/K610/Z710/K790/W850.
Error: EhM not recieved!
Execution Time - 00:00:08
Error: 0x002222
PLEASE HELP ME! ( Depending on U!
P.S. Excuse me for my bad English..
P.P.S.
Please write me here or to e-mail (better). my e-mail is: IKA_GULO@MAIL.RU THANX!!! |
|
|
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
what files are you using to flash your k610?
|
GULO
Joined: Nov 13, 2007
Posts: 6
PM |
K610_R1KG001_MAIN_GENERIC_TH_RED52.mbn
K610_R1KG001_FS_RUSSIA_RED52.fbn
Isn`t they proper? if not, please, advise me anything (also give link to download.)
P.s. i`ve just tried with Davinci and it stopped at 4 % and then wrote:
Loader Initialization Failed!
Try manual CID selection!
but, i cant turn my phone on to get-known what is my CID. what can i do? help please..
[ This Message was edited by: GULO on 2007-11-13 19:53 ] |
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
where did you get those files from?
cant you try different files besides those?
|
GULO
Joined: Nov 13, 2007
Posts: 6
PM |
ok, i`ll find out.. mm.. Can u give me some firmware links to download for SE K610i? |
tranced
Joined: Jan 19, 2006
Posts: > 500
From: Santo Domingo, wonDeRland
PM |
have you tried to restart the computer? you can try www.iprotebe.cz or www.sek750.pl
|
GULO
Joined: Nov 13, 2007
Posts: 6
PM |
They don`t work.. i need firmwares i guess..  |
crazygirl_ut
Joined: Jan 13, 2008
Posts: 2
PM |
Hey Buddy!
My phone just died as well about a week ago. It flashed a white screen, so I took the battery out to restart it and when I went to restart it, it just flashed a red light about 6 times. I went to a couple phone repair shops and they were quoting me anywhere from $50-$150 in repair fees. How frustrating! Well i decided i'd scour the net to see if there was viable solution that was cheaper. And I struck a goldmine! I just wanted to share my solution with you and any other people that are having this stupid problem....as it seems common with this particular model. What makes me even more frustrated is the horrendous price people wanted to fix it for. I just barely fixed my phone by myself for....get this....$11 AUD (7 Euros) How amazing is that! Now I will go through the steps you need to do to get your phone working hopefully.
1. Download Wotan Client from the following website:
http://www.wotanserver.com/WotanClient.e...
2. Buy 1 Credit via paypal from their website...it's 7 Euros and they will email you your login details for the Wotan Client App. You can also download a get started guide to get you started http://www.wotanserver.com/Getting_Start...
3. Install the Wotan Client and open it up.
4. At the bottom right, put in your login details.
5. Plug into your Computer the DCU-60 Gray USB Cable that comes with your phone.
6. VERY VERY IMPORTANT, Remove your sim card and your memory card you have in your phone before you connect your phone.
With your Sony Ericsson K610i phone, press down and hold the 2 and 5 number keys simultaneously while connecting the phone to the USB Cable.
7. When you hear the standard sound of new hardware connecting to your computer, quickly click START on the Wotan Client on the top right.
8. It should say phone found, and it updated my EROM and it said done after about 10 seconds.
9. You can then disconnect your phone and take the battery out for about an hour before you try to power it back up.
This program was a lifesaver! And i'd hate for anyone to have to get gipped or ripped off by the Mobile Repair shops around, so that's why I wanted to post this, as it worked with me.
Hopefully this will work for you as well. Don't let anyone tell you it's a hardware issue! It's a firmware issue...
Alright Mate happy repairing to you!
-Andrea
|
|
|
Posted: 2007-11-13 20:24
jay0726 | 
