| Author |
Super camera driver for k750/w800/w810 |
jonaugust_69
Joined: Mar 31, 2007
Posts: 83
From: Greece
PM, WWW
|
Super Camera driver for k750/w800/w810
Mod by Jonaugust_69 v55.65, 14-03-2008 Update(1)
Important correction for autoselection Cid
Download
http://www.4shared.com/file/4[....]5565_14-03-2008_Update_1_.html
For info view Readme file
Erase the first version "v55.65_13-03-2008"
_________________
k750 cid49 FW(w800 r1bc002)
Download Camdrivers for k(d)750/w800/w810(Site Mr.Kája) http://www.camdrivers.wz.cz/
[ This Message was edited by: jonaugust_69 on 2008-03-13 23:12 ] |
|
|
dragonball75
Joined: Jul 02, 2006
Posts: 32
PM |
@Strong :
Yep , sincerely in the Raider I used in the previous posts , colors are more like the original ... in this beta are a little bit "washed" 
[ This Message was edited by: dragonball75 on 2008-03-14 04:25 ] |
MarkJason
Joined: Dec 03, 2005
Posts: 194
From: Bacolod City, Philippines 6100
PM |
@Kriomag - can help me pick the best value for EM/ENM? I'm using 3a and 3c but normal produces better pics... In your driver, you put 3d as the value but it's too long for EM..
K750>W800 CID49 R1BC002 : Sarmad 5.8 camdriver / Hyper v6 + HyperPHF acoustic |
razvan89
Joined: Dec 28, 2007
Posts: 31
PM |
Ok.Thanks a lot.When you release the final version of 6.0? |
strong
Joined: May 18, 2007
Posts: > 500
From: Greece
PM |
at few days some tests remaining
Samsung GT-i8910 Omnia HD
K850 R1FA035 modded camdriver
modded acoustic drivers
www.camdrivers.wz. |
MarkJason
Joined: Dec 03, 2005
Posts: 194
From: Bacolod City, Philippines 6100
PM |
@Strong - You've modded Sarmad's driver right? Can you explain to me the EM code? I know it have 6 values, 4 for LED EM/ENM and 2 for EM/ENM... I know it's not your work, Sarmad is out in this forum. Thanks! |
pofi
Joined: Jan 29, 2008
Posts: 33
PM |
On 2008-03-13 15:18:41, Raiderski wrote:
pofi
maybe this ISO information in EXIF was because of EXIF bug which was fixed in version 6.7.1u - real picture ISO was 100 but in EXIF was 800. in low light you should of course use EM or ENM modes - did you enabled them before shots?
I'm using the latest driver - 6.7.2.. Already tried your driver. I think EM isn't enabled that's why I get noisy pics before. I downloaded a new copy with the configuration. It's better now. I like the colors and EV but a little bit sharpness would be better. Will adjust it using the config..
Thanks..
 |
strong
Joined: May 18, 2007
Posts: > 500
From: Greece
PM |
On 2008-03-14 15:02:20, MarkJason wrote:
@Strong - You've modded Sarmad's driver right? Can you explain to me the EM code? I know it have 6 values, 4 for LED EM/ENM and 2 for EM/ENM... I know it's not your work, Sarmad is out in this forum. Thanks!
It has LedEM/EM/DEFAULT_SHOT/ ENHANCED_SHOT
as i can undestand for led it has 2 functions 1 for normal mode quality (normal-normal night) and second for fine mode where enable it with macro on
(fineEM-fineEMnigtht)
For EM it has 2 fuct 1 for EM and 1 for EMnight enable it with macro on
For DEFAULT_SHOT is normal quality shot and it has color corection
For ENHANCED_SHOT is fine quality mode it has color corection and takes
led white balance and looks at EM to take enhanced shot.
If someone knows better or wants correct me lets do it
Samsung GT-i8910 Omnia HD
K850 R1FA035 modded camdriver
modded acoustic drivers
www.camdrivers.wz. |
markztrance
Joined: Nov 18, 2006
Posts: 137
From: Dagupan, Philippines
PM |
@ pofi:
WOW:o what on the world you have all the rubiks cube!!!
ive mastered 3x3 but i wish i have that 4x4 and 5x5, especially that weird starlike... em.. is it a cube?? 
BTW good driver  |
lpachuong
Joined: Jun 06, 2007
Posts: > 500
From: Vietnam
PM |
A4A-FINAL RELEASE
Link:
http://www.mediafire.com/?bbt0le1w2gx
Please read this post carefully to know how to use this driver
Functions
- Normal Mode: EM off, Sync with MX60
- Fine Mode: EM on, nice clear pictures
- Macro off: for no macro (normal shot)
- Macro on: for macro (close-up shot)
EV_M_20= CYAN;
EV_M_17= RED;
EV_M_13= BLUE;
EV_M_10= YELLOW;
EV_M_07= ZOOM;
EV_M_03= ISO;
EV_0_00= FOCUS; (zoom 1.1-infinity, zoom 1.2-4.0-manual focus)
EV_P_03= EXPOSURE;
EV_P_07= LIGHT_METERING; (1.1: spot on)
EV_P_10= SHUTTER_MOD;
EV_P_13= SATURATION; (good for w800i and w810i)
EV_P_17= WB_CORRECTION; (1.0-default, 1.1-1.5 for manual colour correction)
EV_P_20= PROFILE; (zoom 1.1: cloudy weather, 1.2: document)
UPDATES
- Improved the stability of the codes and bugs fixed
- Tested and tweaked hardware parameters (buses, frequencies, voltages, delays)
- Improved the sharpness with new code + Pixels correction
- k750i+w800i with Raidersky's compression for stablitly
HOW TO USE THIS DRIVER EFFECTIVELY
- For those who are new to A4A driver, please read the instruction carefully before using it and make of copy of this instruction. It is suggested that you should spend 1 day to play with this new driver to get used to it and carry out different tests to decide whether it is good or not
- Install the correct driver for your phone and the compression you want
- Use Notepad to change some parameters as shown below
- Feel free to report bugs (if you encounter them many times). This doesn't only help you but also help other A4A's users (A4A: All for All)
WHAT SHOULD I KNOW ABOUT THIS DRIVER?
- Please remember that there are three versions in the package: 2 for K750iW800i with 90% and 93% JPEG compression and 1 for W810i with 95% JPEG compression. If your phone K750iW800i can work well with 93% JPEG compression then it is suggested that you can use it for the best quality. If your K750iW800i cannot work at that compression, please use 90% JPEG compression.
- As can be seen from the example, there are significant differences in the two sharpness values: 06 and 07 . Sharpness=07 will give the best result with Pixels correction where as Sharpness=06 will have noise. You can change these value by editing the driver.
- Colour Balance (WB balance): If you cannot get the correct colour on the ViewFinder as that on the real scence, please choose EV +1.7 and zoom 1.1, wait for 3 seconds and start taking pictures. This is also good for taking picture with LED
WHAT PARAMETERS SHOULD I CHANGE
- Sharpness: this can be change from the top of the code. The values you can change to are 05, 06 and 07.
- Contrast: 01,02,03, top of the driver
- EM default exposure: Search for IMP_SHOT and the scroll up to see EM = ...
$c0 01
$s0 42 $-0 r1
#CMDEM(04,$w0)
$cl
$s0 3f $-0 r1
#CMDEM(04,$w0)
$cx
If you get overexposure, please change 42 to 40 and 3f to 3e
Thank you for reading this instruction. Hope you all enjoy using it
PS: The attached pictures are taken with my K750i cid49 - Mainfirm: W800i r1bd001, FS: W700i r1bd001, GDFS: W700I r1bd001 (My w800i gdfs got damaged  ) These pictures are not edited by any software.
[ This Message was edited by: lpachuong on 2008-03-15 17:30 ] |
lpachuong
Joined: Jun 06, 2007
Posts: > 500
From: Vietnam
PM |
I have finally completed my project and got my results from the January Examination. Now, I can spend some of my free time improving my camera Since I was busy and could not carry out many tests, I didnt update the beta drivers and even log-in ESATO  ) I hope my new driver is suitable for your phone and you can have some funs with it.
To heiyei: Sorry bro, I forget how to spell your nickname. It is my bad I am doing well and hope you too.
To lengthstreet: How are you doing? How is our baby? Best wishes to your family
To everyone: Have a nice weekend.
[addsig] |
Mr.Kája
Joined: Mar 22, 2007
Posts: 180
PM |
lpachuong: Great work ;o) I have added this driver on page without those 2photos, i hope, it doesn't matter?
Nowadays, I'm enjoying Elm, fw R7BA076. And here camdriver database for k750/w800/w810: www.camdrivers.wz.cz  |
sotam
Joined: May 02, 2007
Posts: 377
PM |
OMG how many camdriver i cant decide......
_________________
I  W810i
http://bux.to/?r=jrmr
[ This Message was edited by: Armageddon on 2008-03-15 03:33 ] |
MarkJason
Joined: Dec 03, 2005
Posts: 194
From: Bacolod City, Philippines 6100
PM |
On 2008-03-14 20:45:53, strong wrote:
On 2008-03-14 15:02:20, MarkJason wrote:
@Strong - You've modded Sarmad's driver right? Can you explain to me the EM code? I know it have 6 values, 4 for LED EM/ENM and 2 for EM/ENM... I know it's not your work, Sarmad is out in this forum. Thanks!
It has LedEM/EM/DEFAULT_SHOT/ ENHANCED_SHOT
as i can undestand for led it has 2 functions 1 for normal mode quality (normal-normal night) and second for fine mode where enable it with macro on
(fineEM-fineEMnigtht)
For EM it has 2 fuct 1 for EM and 1 for EMnight enable it with macro on
For DEFAULT_SHOT is normal quality shot and it has color corection
For ENHANCED_SHOT is fine quality mode it has color corection and takes
led white balance and looks at EM to take enhanced shot.
If someone knows better or wants correct me lets do it
Thanks for the explaination... I thought the EM is coded in auto detection with ranges from the two values... Now it's clear that its the same as all of the drivers.
Can you give me the best values for quick but with quality in EM? The values that you can use it in indoors with sufficient lighting.
[ This Message was edited by: MarkJason on 2008-03-15 06:04 ] |
recl
Joined: Nov 25, 2007
Posts: 251
From: Romania
PM |
for both 93/90 compression I get an error when I start the camera.."wrong camera driver version (0.0).please update camera driver to 4.5 or later"
I have CID 49 red k750i@w800i firmware R1Bc002 |
|
|
Posted: 2008-03-14 00:11
