| Author |
Super camera driver for k750/w800/w810 |
smsumit
Joined: Mar 09, 2007
Posts: 6
PM |
everithings is simple...
macro on, macro off. (num 4)
when the camera see low light enables the ENM automatecly and the only you have to do is press (num 7) to nightmode on, nightmode off or (*) for led on or led off.
for the others functions use it like always use in the standard original drivers
@kopritis
Well, like in other drivers, for example, kriomag's version 6.2, thr was a simple option to turn on / off the ENM [macro on=ENM off=NORMAL]. the reason why i am saying is this, ENM takes MUCH too long to take a photo. In cases whr i dont need ENM but i need faster shutter speed, i can turn it off by turning the macro off. In ur driver, ENM is on automatically and cant be turned off [ if i am right ] that means, if i need to take photos fast even with loss in quality, i cant do that ... right ?
[ This Message was edited by: smsumit on 2007-04-01 10:42 ] | |
|
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
Well, like in other drivers, for example, kriomag's version 6.2, thr was a simple option to turn on / off the ENM [macro on=ENM off=NORMAL]. the reason why i am saying is this, ENM takes MUCH too long to take a photo. In cases whr i dont need ENM but i need faster shutter speed, i can turn it off by turning the macro off. In ur driver, ENM is on automatically and cant be turned off [ if i am right ] that means, if i need to take photos fast even with loss in quality, i cant do that ... right ?
[ This Message was edited by: smsumit on 2007-04-01 10:42 ]
yes u can do that. i meens in the day light the driver with the help of camera can be understand the light contitions and turns off the ENM. So, when the camera see low light conditions he set automatecly on ENM... and cant be turned off
Sorry i can't explain better bucause my english is bad!! sorry! 
[ This Message was edited by: kopritis on 2007-04-01 10:54 ] |
smsumit
Joined: Mar 09, 2007
Posts: 6
PM |
So it goes like this -- > in low light, i cant take a photo of a moving object ? for example, with other drivers, if i see something movin in low light, i'd just turn the ENM off, it gave me a noisy pic but atleast the moving object could be seen [ and with LED on, the noise is much reduced ] but now, with ur driver, i cant do that ... it would be wonderful, if u could set the ENM in an option like kriomag's to turn on or off ...
and thanx for the fast reply  |
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
On 2007-04-01 12:02:16, smsumit wrote:
So it goes like this -- > in low light, i cant take a photo of a moving object ? for example, with other drivers, if i see something movin in low light, i'd just turn the ENM off, it gave me a noisy pic but atleast the moving object could be seen [ and with LED on, the noise is much reduced ] but now, with ur driver, i cant do that ... it would be wonderful, if u could set the ENM in an option like kriomag's to turn on or off ...
and thanx for the fast reply
i'll try to do that!! |
anakindon
Joined: Mar 20, 2007
Posts: 3
PM |
@kriomag
i'm sorry bro, but i tried to open the link you gave me on how to modified a driver....
it seems that it doesn't work...
perhaps u could give another link....
thanks..
|
mikeypants
Joined: Mar 24, 2007
Posts: 26
PM |
kopritis,
I have your wonderful mod on my K750i, but I am wondering if it will work on my W810i? Here are it's specs as read by DavinciTeam:
Detected SonyEricsson: K750/D750/W800/W810/W550/Z520/Z530.
Status Ok, OTP Close, CID49, PAF1
IMEI: XXXXXX-XX-XXXXXX
Phone Color: Red
Phone CID: 49CDA Number:CDA102494/128Firmware Version:R4ED001
Thank you! |
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
On 2007-04-01 13:55:01, mikeypants wrote:
kopritis,
I have your wonderful mod on my K750i, but I am wondering if it will work on my W810i? Here are it's specs as read by DavinciTeam:
Detected SonyEricsson: K750/D750/W800/W810/W550/Z520/Z530.
Status Ok, OTP Close, CID49, PAF1
IMEI: XXXXXX-XX-XXXXXX
Phone Color: Red
Phone CID: 49CDA Number:CDA102494/128Firmware Version:R4ED001
Thank you!
I don't have w810 and i don't know if its work!! |
Kriomag
Joined: Dec 20, 2006
Posts: > 500
From: Poland
PM, WWW
|
On 2007-04-01 12:21:49, anakindon wrote:
@kriomag
i'm sorry bro, but i tried to open the link you gave me on how to modified a driver....
it seems that it doesn't work...
perhaps u could give another link....
thanks..
http://www.rogepost.com/n/6536478228 <-- Proper Link
CC from Pilya's Driver ( http://www.rogepost.com/n/1477080053 )
AE Lock from Cheng Rong's 8.53
SPOT from my 7.7 Mod ( http://www.rogepost.com/n/7543814916 )
|
Mr.Kája
Joined: Mar 22, 2007
Posts: 180
PM |
Hi, I tried new cam drivers again, I must say, unluckily, the Kriomags falled with macro and night mode on when I tried to take a photo. I just tested Kopritis one. I think, the automatic ENM seems strange and good. Anyway, I tried to compare with 8.54, I was doing everything possible, but look:
Kopritis one
8.54 (1.8 mode)
Also I want to say to all, that if you want to show adventages of your driver, it's not bad to add photos of another drivers next to your to campare the light and other conditions...and well, pictures in this forum are a bit smaller than original, so sometimes, it's hard to solve, how much it is sharp (i know, it can't be changed:)) And it's not reaction on kopritis cam-this one is sharp, not just ilusion). I hope, nobody will be angry with me:)
Nowadays, I'm enjoying Elm, fw R7BA076. And here camdriver database for k750/w800/w810: www.camdrivers.wz.cz  |
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
@reaction
i found a solution at your problem... when you have nightmode on at my driver try to put the EV over 0. for example +1.3 or +1.7 like that. but you will see at your photos some noise!
[ This Message was edited by: kopritis on 2007-04-01 13:31 ] |
Mr.Kája
Joined: Mar 22, 2007
Posts: 180
PM |
Well, I should say it exactly before...how I said, I tried almost everything-these both photos were taken with +2.0EV
EDIT: I will complete it-no flashlight... I took 2photos from each one camcoder and chosen the best one. Anyway, could be in my phone, anyone esle should compare it too...
[ This Message was edited by: Mr.Kája on 2007-04-01 13:56 ] |
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
On 2007-04-01 14:54:12, Mr.Kája wrote:
Well, I should say it exactly before...how I said, I tried almost everything-these both photos were taken with +2.0EV
EDIT: I will complete it-no flashlight... I took 2photos from each one camcoder and chosen the best one. Anyway, could be in my phone, anyone esle should compare it too...
[ This Message was edited by: Mr.Kája on 2007-04-01 13:56 ]
and my photo is so dark with ev+2.0?????? hmmm, strange! i'll see what i can do! 
[ This Message was edited by: kopritis on 2007-04-01 13:59 ] |
Kriomag
Joined: Dec 20, 2006
Posts: > 500
From: Poland
PM, WWW
|
On 2007-04-01 14:00:45, Mr.Kája wrote:
Hi, I tried new cam drivers again, I must say, unluckily, the Kriomags falled with macro and night mode on when I tried to take a photo.
Why? What happend? Which version of 7.7 Mod? (link would be helpful) |
kopritis
Joined: Mar 11, 2007
Posts: 295
From: Loutsa-Greece
PM |
@Kriomag
Can you help me to put on my driver color correction? because i don't know how to fix my colors!!
[ This Message was edited by: kopritis on 2007-04-01 14:06 ] |
Mr.Kája
Joined: Mar 22, 2007
Posts: 180
PM |
Kriomag: I mean one from this post, problem is (you will kill me:)) that I don't remeber which one from these was it and now, these links don't work, when I tried to again...
Kopritis: I think, it doesn't really prove anything, it could by just anomaly thx the conditions, to it would be better to leave anybody else to make the same compare. I had no time for longer test. In that test, the conditions were really bad with a just minimal light.
_________________
Well, I don't now much about IT, but I'm happy O:o) Well, and for support-I have k750i, CID49Brown and R1CA021 firmware;)
[ This Message was edited by: Mr.Kája on 2007-04-01 14:45 ]
[ This Message was edited by: Mr.Kája on 2007-04-01 14:47 ] | |
|
Access the forum with a mobile phone via esato.mobi
|
Posted: 2007-04-01 11:41
