| Author |
can a k800 access my adsl via bluetooth? |
AznRacerNSX
Joined: Dec 06, 2006
Posts: 9
PM |
hmm... i tried using the Widcomm drivers (5.0.1.802 and 5.1.0.1700) won't recognize my device. So i had to end up using back the program that came with my bluetooth dongle. Kinamax BT-USB using IVT Corporation BlueSoleil. Man.... I'm tempted to just get another usb dongle....... any recommendations.. anyone..... one that supports widcomm drivers right? stupid thing wasted my whole day... |
|
|
AznRacerNSX
Joined: Dec 06, 2006
Posts: 9
PM |
got it to work... with a kingston bluetooth 2.0... not sure how i did it... lol but ya... um...just can't keep a steady connection but i got it to work so it's all good! |
blututan
Joined: Jan 19, 2007
Posts: 1
PM |
This is my first post.
I read this thread over and over and I still can't get it to work. I am using a K800i with a Bluesoleil bluetooth dongle.
Then yesterday, I finally got it to work and it's easy.
All I did was...
- Connected to the Serial Port profile.
- Launched the SE PC Suite (I already prepped it to connect via bluetooth)
- Clicked on the Mobile Networking Wizard.
- Just waited for a few seconds to connect (no need to press any buttons).
- Launched the phone's Internet browser and I'm in...
Easy. Hope this helps.
[ This Message was edited by: blututan on 2007-01-19 21:52 ]
[ This Message was edited by: blututan on 2007-01-19 21:53 ] |
pedrops
Joined: Jan 30, 2007
Posts: 181
PM |
Hi guys,
I have a k800 and I'm trying the tutorial to acess the pc internet on my cel, with a DCU-60
but I just can't get it work
i've followed all the steps, installed all software and etc
but when I start Opera Mini with device manager, it stuck at 50% in "testing connection"
tryed out other browsers with no luck... gives error message
everything is right, it even start opera trough device manager... but it doesn't connect
anyone have any ideas on what's wrong?
Shall I create a Data Acount with my computer's IP at?
Shall I create an Internet Profile and set to connect with these data account?
(I've tried with, and without the profile... with it loads till 50% and froze... without, it doesn't connect)
P.S
Yeah, I know I should buy a BT dongle and stop breaking my head ^^
Is it really possible to connect with the cable?
What in hell am I doing wrong? |
markwiseman
Joined: Feb 27, 2007
Posts: 1
PM |
Quote:
|
On 2007-01-19 21:27:09, blututan wrote:
This is my first post.
All I did was...
- Connected to the Serial Port profile.
- Launched the SE PC Suite (I already prepped it to connect via bluetooth)
- Clicked on the Mobile Networking Wizard.
- Just waited for a few seconds to connect (no need to press any buttons).
- Launched the phone's Internet browser and I'm in...
|
|
blututan
What did you set up for your data connection and internet connection?
I have done what you have done above but when i open my phone's internet browser it asks to create these accounts.
I have tried a few combinations but unsuccessfully so far.
Thanks |
speedyandre
Joined: Jan 08, 2005
Posts: 42
PM |
@pedrops:
Opera-mini can't check connectivity using bluetooth, that's why it hangs.
Try to start it from your phone and let it check using gprs.
When the test is ok it also will work with bluetooth.
I've tried to setup PAN as Wakeelm did but there's a problem with my K800 because I earlier made a PAN connection to my pc.
At that moment on the K800 came a question wether it was a server or a client and I think I choose a server.
When connecting PAN to a laptop with Widcomm drivers it complains that both the laptop and the K800 can't be an accespoint.
An alternative way of bluetooth setup on the laptop is let it allow devices to make a virtual private connection but that's not working
PAN then can be connected but the K800 can't use it for internet.
I'm looking for a way to change how the K800 acts with its PAN, it should be a client and not a server.
André
[ This Message was edited by: speedyandre on 2007-03-04 00:42 ] |
simbus82
Joined: Jan 09, 2007
Posts: 21
From: ITALY - Veneto, near Venice.
PM, WWW
|
EXCUSE ME!!!!
But for creating the data account!??!??!? |
speedyandre
Joined: Jan 08, 2005
Posts: 42
PM |
On 2007-03-04 04:03:19, simbus82 wrote:
EXCUSE ME!!!!
But for creating the data account!??!??!?
You will get a new data account when you first make a PAN connection, when this has been done you can find your pc's name in the list of data accounts on your K800 and then you can choose it in the internet settings.
In the data account itself you don't have to change anything if your pc doesn't use a proxy server.
You may check in the PAN settings if dhcp is enabled, else it won't get a working IP and gateway.
The PAN settings can be found as network connection on your pc.
André
[ This Message was edited by: speedyandre on 2007-03-04 12:57 ] |
simbus82
Joined: Jan 09, 2007
Posts: 21
From: ITALY - Veneto, near Venice.
PM, WWW
|
I'm posting my reply with my k800i and my dial up connection!! Thanks to all! K800i rules!
This message was posted from a K800i |
decay_zeit
Joined: Feb 28, 2007
Posts: 401
From: PERSIA
PM |
well here i am,reading this thread over and over for weeks and still no success...
people i'm asking you help,cause i don't have access to GPRS(that's not that i don't pay,the provider doesnt provide it at all),so i'm in a reall need to surf on my k800 through computer internet connection...
i'm using a dial-up connection and the software for my BT dongle is BluSoleil,computer connects to phone with bluetooth using COM9,connection is steady...
i click on Bluetooth PAN Service,on the phone a dialog appears saying : "to use your phone to access internet,you must have a valid internet profile that uses a Packed Switched data account..." and a dialog on pc says : Assigning IP address.
after minutes Blutooth PAN network is connected between phone and pc(with this PAN IP : 169.254.78.20 and 1 Mbps speed)
i hit OK on phone,and create a new account for BT data accounts.with PS data type,naming it A and now save.(and APN,Username,Password leaving blank)
but a problem here,no PC named data account with a BT icon beside it is created(this account was created once by sudden before,but now,it doesnt exist)
in BT PAN status,the Default Gateway is blank.
and here i'm stucked,don't know what to do now...i've created serial port connection and BT PAN connection between pc and phone,but what now??????????
what should i do with phone settings?
any replies would be greatly appreciated ... thanks
_________________
[ This Message was edited by: decay_zeit on 2007-03-05 21:48 ] |
speedyandre
Joined: Jan 08, 2005
Posts: 42
PM |
The IP you get means that something goes wrong, all 169.x IP's are useless.
The fact that your phone wants to setup a gprs connection is normal, because it's the first thing that should be working before you can succeed.
I think it won't work without valid gprs settings.
There's another way to get all this working:
This tutorial shows a way without the need of working gprs settings.
It's a tutorial translated to English and I wrote the original one in dutch 
André |
speedyandre
Joined: Jan 08, 2005
Posts: 42
PM |
On 2007-03-05 22:35:47, simbus82 wrote:
I'm posting my reply with my k800i and my dial up connection!! Thanks to all! K800i rules!
This message was posted from a K800i
That's great, so if you open an applet like Opera-mini the K800 connects to your pc?
André |
simbus82
Joined: Jan 09, 2007
Posts: 21
From: ITALY - Veneto, near Venice.
PM, WWW
|
On 2007-03-06 11:05:41, speedyandre wrote:
On 2007-03-05 22:35:47, simbus82 wrote:
I'm posting my reply with my k800i and my dial up connection!! Thanks to all! K800i rules!
This message was posted from a K800i
That's great, so if you open an applet like Opera-mini the K800 connects to your pc?
André
YES!
I have created the account including the connection with the symbol of the bluetooth.
Then on the PC, i have gone in "connections" and I have shared my dialup connection...
With the k800's integrated browser, I have started it and it is worked all!
With “Opera mini” I have do an automatic configuration, so Opera con take advantage of the new connenction to pc (it is not more “HTTP” but “Socket”).
And therefore I have answered on the forum! i'm sorry only about that Opera mini cannot be used in horizontal like the browser integrated on k800i!
PS: Excuse for my english!!! |
speedyandre
Joined: Jan 08, 2005
Posts: 42
PM |
Wow, so the built-in browser also can use bluetooth 
I've got an older horizontal browser you can try
André |
decay_zeit
Joined: Feb 28, 2007
Posts: 401
From: PERSIA
PM |
speedyandre
thanks for the link,but i'm wondering that was nothing to do with PAN...i've already browsed it,and the SE SDK here,it is 73 MB and i'm using a dial-up connection 5Kbps,you know how long it takes???:D
regular download work,but when i tried DAP,download fails...
hmm...can you help me how to have that data account on my phone with BT icon????
|
|
|
Posted: 2006-12-06 22:19
