Author |
Modded Camera Driver for k800i/k810i |
Goldmen Joined: Oct 07, 2007 Posts: > 500 From: Bulgaria PM, WWW
|
On 2008-02-28 14:18:16, xadrian wrote:
Goldmen can you added Slow flash sync mode in you driver??
If you mean like UCD...why not....?
May be I`ll try,but latter today or tonight...
[ This Message was edited by: Goldmen on 2008-02-28 15:14 ] |
|
Goldmen Joined: Oct 07, 2007 Posts: > 500 From: Bulgaria PM, WWW
|
Can we make some Master Clock like BrAzUkA´s camera drivers
for K550/W610....? |
Raiderski Joined: Jul 03, 2006 Posts: > 500 From: Poland, Hell, Mountains PM, WWW
|
what Master Clock can do?
|
Goldmen Joined: Oct 07, 2007 Posts: > 500 From: Bulgaria PM, WWW
|
On 2008-03-07 11:58:40, Raiderski wrote:
what Master Clock can do?
That`s copy-paste from "v4.87_SuperNatural™_BrAzUkA´s"
---------------------------------------------------------------------------
//=============================
// Master Clock™ w610
//=============================
cam_i2c_address=1F;
cam_i2c_clock_freq=64; // Clock 100khz
cam_vf_clock_freq=1,5DC0; // Clock #1 on, frequency 24MHz
cam_ss_clock_freq=1,32C8; // Clock #1 on, frequency 13MHz
cam_vf_format=B100;
cam_ss_format=0001;
cam_ss_format_9=B100;
cam_ss_format_30=B100;// this one is YUV422, Y1, U, Y2, V
cam_data_offset_9=0;
cam_data_offset_30=0;
cam_ss_sync_30=3;
cam_data_offset=2;
cam_vf_sync=7;
cam_ss_sync=f;
cam_ss_sync_9=7;
cam_ss_retries=9; |
number1 Joined: Sep 12, 2007 Posts: > 500 From: UK,kent,Sittingbourne PM |
increase the MHZ so we can run more video fps without bugs,
cam_vf_clock_freq=1,32C8; // Clock #1 on, frequency 13MHz<< viewfinder
cam_ss_clock_freq=1,32C8; // Clock #1 on, frequency 13MHz<< snapshot
it runs 13MHZ standard we can overclock it to say 24MHZ,
cam_vf_clock_freq=1,5DC0; // Clock #1 on, frequency 24MHz<< viewfinder
cam_ss_clock_freq=1,5DC0; // Clock #1 on, frequency 24MHz<< snapshot
i'll already tried this on the k800, overclocking the sony cammodules doesn't work aswell as over-clocking the micron 1's, also you might damage the cam if you go too high.
|
Goldmen Joined: Oct 07, 2007 Posts: > 500 From: Bulgaria PM, WWW
|
..and here is the driver:
http://www.mediafire.com/?mvrw3tydlwu |
naveedaziz83 Joined: Nov 15, 2007 Posts: > 500 From: Saudi Arabia PM |
i loaded camera mod kapotris 3.0 in my k800
but whn i check the hidden menu it shows me 2.4
is tht normal??
im using xs++1.6.8 beta and using the folder
files_to_upload\\ifs\\settings\\camera
plz let me know if i am doing somthin wrong
|
ikang Joined: Dec 10, 2007 Posts: 50 From: Gudeg City, Indonesia PM |
@ everyone....
i use mod cam driver ...i like it...but the color little to much for me. i mean :
1. the "red" color bcome "more red", "green" bcome "more green" etc.
if i want to reduce this things which line i must change ???
2. in night mode (TL or TP) my cam display become dark so if i take wthout flash the pic look dark. why it happen?? which line i must change ?
pleaseee give me a solution..... |
ikang Joined: Dec 10, 2007 Posts: 50 From: Gudeg City, Indonesia PM |
@ nabhati
no... mostly mod cam driver made from the previous one. so if the modder don't change the version number (open with notepad then u can see it) in new driver then the new one still have the same number with previous. if u still doubt... just re-upload ur cam driver. it should fix. |
naveedaziz83 Joined: Nov 15, 2007 Posts: > 500 From: Saudi Arabia PM |
@ikang
how can i check with notepad.
i checked using (>*<<*<*) and it says cam v2.4
i even uploaded it again and still it hasnt changed
is it because of the firmware in my phone (R1CB001)
i tired SEUS to upgrade the firmware but it says i have the latest firmware
|
ikang Joined: Dec 10, 2007 Posts: 50 From: Gudeg City, Indonesia PM |
hhmmmm.... really !?
in notepad look at "Information" section just below the "Platform registered used" section and above "Camera characteristics" section.
this example for kopritis 3.0 cam driver :
info_name=MCB881;
info_vendor=Kopritis; >>>> the modder
info_major_ver=3; >>>> this is the prefix number (3.XX)
info_minor_ver=0; >>>> this is the suffix number (x.0)
maybe i wrong but i as far as i know it will read 3.0 version. cos i've trying to change the code number and then when i open the hidden menu it show the number version just like the number i wrote.
btw....first time i using 1.6.8 version too but i had little trouble when uploading. the cam driver won't change just like ur problem. so i tried the 2.XX version and i uploading manually by dragging the driver (camdriver0.dat) to "camera" in "ifs\\setting" by this squences: ifs >> setting >> camera.
and always works fine till now (maybe hundreds times. hehe...).
xs++ version i use at http://oscdn.com/files/283574/XS++.zip.htm
some people say kopritis is on of the god father in camdriver mod. but honestly for me there isn't much improvment in his driver compare to original one. (i'v been tried ALL his version. the best is 2.7, 3.6 or 3.71)
my suggestion just try the ultimate cam driver from jomatexia. in general opinions this is the best right now
read this
http://www.esato.com/board/viewtopic.php?topic=161414&start=0
download here
http://www.4shared.com/accoun[....]1/f37e5996/sharing.html?rnd=64 |
Goldmen Joined: Oct 07, 2007 Posts: > 500 From: Bulgaria PM, WWW
|
On 2008-03-22 14:54:25, ikang wrote:
btw....first time i using 1.6.8 version too but i had little trouble when uploading...
Where from I can download this version...?
Thank you!
[ This Message was edited by: Goldmen on 2008-03-22 14:20 ] |
naveedaziz83 Joined: Nov 15, 2007 Posts: > 500 From: Saudi Arabia PM |
well i uploaded the cam driver and now i have one more question to ask
after i take a pic, the 3MP sign that should b at the bottom left corner appears in the middle of the screen
does any1 has any idea y itz happening
iz it because of the firmware im using (R1JG001)
or iz it something else...
plz help |
Goldmen Joined: Oct 07, 2007 Posts: > 500 From: Bulgaria PM, WWW
|
It`s because layout.... |
naveedaziz83 Joined: Nov 15, 2007 Posts: > 500 From: Saudi Arabia PM |
ok
well tht xplains it since im nt using the default layout
i have a custom layout
ty anywayz |
|