| Author |
P900 cable connection trouble, tried everything. |
georgejason
Joined: Feb 26, 2004
Posts: 63
From: Chennai, India
PM |
check in ur device manager if SEMC DSS-20 Syncstation cable is enabled and working.
ill also check out other options, other than that, did u follow my msg exactly step by step, just keep in mind that u have to disable the com port the fone is connected before trying to connect. pls let me know.
Begin at the beginning and end at the end.
For Indians
support and join http://groups.yahoo.com/group/se_india/ |
|
|
Closecat
Joined: Feb 28, 2004
Posts: 17
From: Australia
PM, WWW
|
thanks again.
checked SEMC DSS-20 Syncstation cable - working.
followed it step by step exactly.
Disabled com port in phone monitor options.
I also have my DSL modem connected through USB 1, and have the phone connected to USB 2, which is recognised as com 3 after installation. is that a problem?
I have disconnected the DSL modem and tried it alone without any luck. |
georgejason
Joined: Feb 26, 2004
Posts: 63
From: Chennai, India
PM |
please tell me which com port ur usb1 is using, if at all its usin a com port, coz as i told u earlier, com1 and com3 are one and the same, and one more important thing, apart from disconnecting the dsl modem physically, also remove it from the modems in control panel, fcourse if only you would be able to install it again later,
there are times when some modems which work through the usb port dont work when there are other modems connected.
Begin at the beginning and end at the end.
For Indians
support and join http://groups.yahoo.com/group/se_india/ |
Closecat
Joined: Feb 28, 2004
Posts: 17
From: Australia
PM, WWW
|
I tried removing the other modem and starting it all again without any success. The phone connection link recognises the phone when i connect it to the cradle, and moves the arrows, however the computer connot for some reason connect to the phone for dial up connection at all. from the wizard and from manual installation.
I'm sure i'm not the only person with this problem, and if anybody has anything more to offer please dont hesitate to say so.
|
Closecat
Joined: Feb 28, 2004
Posts: 17
From: Australia
PM, WWW
|
guess i bought a dodgy phone... |
Maratonmannen
Joined: Dec 06, 2003
Posts: > 500
From: Stockholm, Sweden
PM |
Tried new USB drivers?
http://www.sonyericsson.com/s[....]leCatID=5&MN=Drivers&noredir=1 |
Closecat
Joined: Feb 28, 2004
Posts: 17
From: Australia
PM, WWW
|
unfortunately, ive already downloaded the new drivers for both the sync station and modem without any luck at all.
its really shattering... |
georgejason
Joined: Feb 26, 2004
Posts: 63
From: Chennai, India
PM |
[quote]
On 2004-02-29 01:40:12, Closecat wrote:
I tried removing the other modem and starting it all again without any success. The phone connection link recognises the phone when i connect it to the cradle, and moves the arrows, however the computer connot for some reason connect to the phone for dial up connection at all. from the wizard and from manual installation.
@Closecat
Buddy, before trying to connect to the net, you please double click on the phone connection link and uncheck the com3 so that it shows "NOT CONNECTED", the go to control panel on ur phone and choose cable and choose modem and then try connecting please, i guess i explained the same thing in my first post to u.
then please also go to control panel of your computer and then choose the phone monitor options and enable ur com port 3.
pls get back to me.
_________________
Begin at the beginning and end at the end.
[ This Message was edited by: georgejason on 2004-03-02 08:15 ] |
Drliamski
Joined: Dec 10, 2003
Posts: 97
From: Manchester
PM |
I had serious issues with the cradle and could not get it to work at all and the only solution that wirked for me was a wipe of my harddrive and a new installation of win 2000 |
WildCard#!
Joined: Jan 06, 2004
Posts: 102
From: ge foie
PM, WWW
|
http://www.esato.com/board/viewtopic.php?topic=47266#post627244
Check this link, its about disabling the modem to free up the virtual ports.
Hope this helps. |
georgejason
Joined: Feb 26, 2004
Posts: 63
From: Chennai, India
PM |
@closecat
Hi, have u got it working? do let us know.
Begin at the beginning and end at the end.
For Indians
support and join http://groups.yahoo.com/group/se_india/ |
Screw
Joined: Mar 13, 2004
Posts: 1
PM |
I have the same problem as Closecat after installing XP from the scratch with all new driver and fixes. My P800 can't connect to Phone Connection Manager. If I put my phone in the Syncstation or remove it. The arrows in the icon moves but the connection can't be established.  I have tried all suggestion in this thread, but nothing works. I thought the new USB 2.0 drivers from VIA were the problem, but after removing them, the problem still exist.
How can I connect my phone to the PC again? It's terrible, because I have to backup the phone urgent.
regards
Carsten |
georgejason
Joined: Feb 26, 2004
Posts: 63
From: Chennai, India
PM |
@Screw
Please read through the full forum carefully, ur modem is sure to work
George
Begin at the beginning and end at the end.
For Indians
support and join http://groups.yahoo.com/group/se_india/ |
Shtong
Joined: May 18, 2004
Posts: 1
PM |
Well, after trying desesperately to connect to the internet with my P900 , and after reading 2 times this topic (cause I have same error message than CloseCat), I found why I was unable to connect.
I just selected "Modem" in the cable connection type, and the magic was in.
Finally, nobody in this thread mentionned this point, and this may be the solution for those have this problem |
|
|
Posted: 2004-02-28 10:59
