| Author |
fMA f[??] Mobile Agent, software for sms and phone monitoring |
J3K
Joined: Oct 28, 2003
Posts: 49
From: Melbourne, Australia
PM |
@ mwarner:
1. Install the latest Widcomm drivers, currently 1.4.3.4 (I always use the latest version from any vendor, which I patch to work with any dongle). Note that you must rename bth.inf to bth.bak in Windows\Inf *before* installing these drivers if you are running Windows XP SP2.
Where do I obtain the patch from? And the latest drivers? Cheers |
|
|
mwarner
Joined: Dec 23, 2003
Posts: > 500
From: Warwickshire, England
PM, WWW
|
I am not sure if the patch is widely available these days. It was on Jons Guides, but I believe he had to pull it because Widcomm got rather upset! Check your PMs if you would like a copy.
As for the drivers, you can download drivers from whichever manufacturer you like and patch it so it will work with your Bluetooth dongle.
It is possible to patch the files yourself, but the procedure is not for a novice. I used to do it for each revision that came out, until I found someone had made a patch that automates the procedure.
If you want to have a go at patching the files yourself you need to get a hex editor (I think I just used MS Visual Studio and opened the files in hex) and edit the following files:
In C:Program FilesWIDCOMMBluetooth-software
- BTStackServer.exe
- BTTray.exe
In C:WindowsSystem32
- wbtapi.dll
Obviously you should make a copy of them and edit the copies!
After editing you need to shut the PC down, bring it back up in Safe Mode and then copy your edited files back over the installed files.
In the Hex Editor, for each file do a search for the sequence:
83 C4 08 85 F6 0f 85 ef 00 00 00
... and replace the last bit (0f85ef000000) with:
90 90 90 90 90 90
This should effectively disable the security checks. I believe in previous revisions you also had to check for 8BF083C40C3BF5750E3BFD750A and replace 750e with 9090 and 750a with 9090, but if I remember correctly this sequence doesn't occur on the later builds - although I could be wrong! It's been a while since I manually patched a driver set.
As for the drivers, one place you can get the latest drivers is from MSI's web site. A direct link to the driver is found below:
http://us-download.msi.com.tw[....]_bluetooth_software1.4.3.4.zip
Hope this helps!
Mike
[ This Message was edited by: mwarner on 2004-10-20 12:59 ] |
J3K
Joined: Oct 28, 2003
Posts: 49
From: Melbourne, Australia
PM |
@ mwarner:
!!!!! VERY HELPFUL POST !!!!!!
Thank you! Grant this guy to be an admin! He seems to be the only person around here that knows what they're talking about!
Cheers for the help buddy!!! I owe you a drink 
P.S.
Make this a sticky! I'm certain if I had this problem 99% of other ppl have to.
|
ztariqz
Joined: Oct 04, 2004
Posts: 21
From: London
PM |
so does anyone know if it supports the s700 fully? whenever i try .. everything synchronizes except the files folder (With all the pictures, mp3s, videos etc..) it gives 'error: not found' ..... does neone know how to solve this?> |
mwarner
Joined: Dec 23, 2003
Posts: > 500
From: Warwickshire, England
PM, WWW
|
@j3k
Thanks for your comments .
@ztariqz
I don't believe the S700 is fully supported in FMA yet, but as I haven;t got an S700 I am not sure what the limitations are. I assume you are using the latest revision 0.1.1.16a downloadble from http://fma.sourceforge.net/ ?
Mike |
ztariqz
Joined: Oct 04, 2004
Posts: 21
From: London
PM |
yep... using latest version of software... as i said everything works perfectly fine except for the 'files' option where the error message not found gets displayed... maybe cuz this phone has external memory that the software cant recognize?
great software nontheless |
Sawyer
Joined: Sep 02, 2004
Posts: 30
From: UK
PM, WWW
|
Quote:
|
On 2004-10-19 12:58:21, mwarner wrote:
I am not sure if the patch is widely available these days. It was on Jons Guides, but I believe he had to pull it because Widcomm got rather upset! Check your PMs if you would like a copy.
As for the drivers, you can download drivers from whichever manufacturer you like and patch it so it will work with your Bluetooth dongle.
It is possible to patch the files yourself, but the procedure is not for a novice. I used to do it for each revision that came out, until I found someone had made a patch that automates the procedure.
If you want to have a go at patching the files yourself you need to get a hex editor (I think I just used MS Visual Studio and opened the files in hex) and edit the following files:
In C:Program FilesWIDCOMMBluetooth-software
- BTStackServer.exe
- BTTray.exe
In C:WindowsSystem32
- wbtapi.dll
Obviously you should make a copy of them and edit the copies!
After editing you need to shut the PC down, bring it back up in Safe Mode and then copy your edited files back over the installed files.
In the Hex Editor, for each file do a search for the sequence:
83 C4 08 85 F6 0f 85 ef 00 00 00
... and replace the last bit (0f85ef000000) with:
90 90 90 90 90 90
This should effectively disable the security checks. I believe in previous revisions you also had to check for 8BF083C40C3BF5750E3BFD750A and replace 750e with 9090 and 750a with 9090, but if I remember correctly this sequence doesn't occur on the later builds - although I could be wrong! It's been a while since I manually patched a driver set.
As for the drivers, one place you can get the latest drivers is from MSI's web site. A direct link to the driver is found below:
http://us-download.msi.com.tw[....]_bluetooth_software1.4.3.4.zip
Hope this helps!
Mike
[ This Message was edited by: mwarner on 2004-10-20 12:59 ]
|
|
What do you mean by this should effectively disable the security checks, Do you mean it disables the need to enter a passcode ? |
doctabako
Joined: Feb 10, 2003
Posts: 286
From: Philippines
PM |
I have no problem using fMA as it works just great. My question is when I open the program I get a lot of file not found warnings which are all vbs files, I just have to click okay everytime this pops up and the fMA starts fine and I can use it normally. The popups are just a little irritating at times. Has anyone experienced this, I tried reinstalling fMA a couple of times but the file not found popups still show up on starting the program. I'm using the latest release and even did an online update but with the same "problem". Thanks for any help.
|
Del
Joined: Jan 11, 2003
Posts: > 500
From: Kent, UK
PM, WWW
|
Quote:
|
On 2004-10-24 13:04:02, doctabako wrote:
I have no problem using fMA as it works just great. My question is when I open the program I get a lot of file not found warnings which are all vbs files, I just have to click okay everytime this pops up and the fMA starts fine and I can use it normally. The popups are just a little irritating at times. Has anyone experienced this, I tried reinstalling fMA a couple of times but the file not found popups still show up on starting the program. I'm using the latest release and even did an online update but with the same "problem". Thanks for any help.
|
|
Yes I get the same problem as you. 
Brought to you straight from the event horizon of a quantum singularity.   |
doctabako
Joined: Feb 10, 2003
Posts: 286
From: Philippines
PM |
update:
Checked the bug reports in the fMA website. Turns out the problem is a scripting error. You just have to change the word "Script" to "sframework" in line 71. Works fine now with my K700i. Now I can use the remote control scripts that I forgot were there when I first used fMA on my old t68i. Here's a link to the fix http://sourceforge.net/tracke[....]538&group_id=71167&atid=530374
_________________
Band of Glockers
[ This Message was edited by: doctabako on 2004-10-24 13:18 ] |
feffe
Joined: Oct 14, 2004
Posts: 20
From:
PM, WWW
|
Hello!
I have tried doing a search on my problem here, but I couldn't find anything. Hope I'm not repeating another stupid question here...
While using FMA to connect with my phone everything works just fine, almost. I cannot sync my phonebook with FMA as it justs keep on "syncing" forever...
And really, come to think about it, the only thing I can actually do with FMA is to simply connect to my phone. Wow, that's fun...
Can anyone help me out here? |
oZmagic
Joined: Oct 18, 2004
Posts: 1
PM |
everything works great with FMA here, exept I cannot see any texts in the text messages, either in the inbox or outbox. Everything else works such as the contacts,calls and files
Any Ideas ? |
Serjo
Joined: Oct 28, 2004
Posts: 2
From: Moldova
PM |
I beg you people for help ! For 3 days I can't make work my T-610 and FMA, with serial cable. Ericcson PC suit and Mobile Monitor see this phone but when i try to download somthing to him they just show me a error 
This is a activity log from FMA
00:20:52:156 Establishing new connection via Serial.
00:20:52:156 Accessing device (may take a while)...
00:20:52:218 Connecting...
00:20:52:843 Identify phone model
00:20:53:531 Auto-connect: Prev phone ID: T610 series [351263009404319]
00:20:53:531 Auto-connect: Curr phone ID: T610 series [351263009404319]
00:20:53:531 Opening phone database
00:20:53:531 Database: Saving to C:\Program Files\Fma\data\T610 series [351263009404319]\dat\
00:20:53:531 Database: Unload all data and clear views...
00:20:53:750 Database: Unload done
00:20:53:750 Database: Loading from C:\Program Files\Fma\data\T610 series [351263009404319]\dat\
00:20:53:765 Try switching character set to UTF-8 or Latin-1
00:20:54:250 Check for special voice dialing commands (dial) (T68, T610)
00:20:54:453 Check for special voice dialing commands (answer) (T68, T610)
00:20:54:671 Check for special voice dialing commands (hangup) (T68, T610)
00:20:54:859 Check SIM status
00:20:55:687 Request calling line ident
00:20:55:875 Request Alpha Tags
00:20:56:281 Enable Call Monitoring
00:20:56:484 Enable New Msg Notification
00:20:56:781 New Messages: Status Report to Terminal not supported!
00:20:56:781 New Messages: Class 3 Delivery not supported!
00:20:57:000 Enable Music Mute Notification
00:20:57:203 Checking EOBEX Capability
00:20:57:296 Obex is OK
00:20:57:296 Obex Build contact structure
00:20:57:375 Obex already in use or connect failed
00:21:10:203 Obex Session Established
00:21:11:218 Obex Negotiateing...
And thats all
Thisi is a Error code 5:
xception class: EComPort
Exception address: 005B4961
----------------------------------------------------------------------------------------------------
Stack list, generated 29.10.2004 0:19:01
[005B495C] CPort.TCustomComPort.WriteAsync (Line 1725, "CPort.pas" + 9) + $17
[005B49B2] CPort.TCustomComPort.WriteStrAsync (Line 1749, "CPort.pas" + 2) + $1B
[005B807B] CPort.InitAsync (Line 3239, "CPort.pas" + 5) + $8
[005B49F3] CPort.TCustomComPort.WriteStr (Line 1761, "CPort.pas" + 3) + $9
[00404482] System.@HandleFinally + $2A
[0066381D] uObex.TObex.SentObject (Line 1055, "uObex.pas" + 32) + $20
[00404482] System.@HandleFinally + $2A
[00660D67] uObex.TObex.Connect (Line 462, "uObex.pas" + 40) + $6
[00404482] System.@HandleFinally + $2A
[006616EA] uObex.TObex.GetObject (Line 572, "uObex.pas" + 5) + $E
[0067DE3B] Unit1.TForm1.ObexGetObject (Line 6059, "Unit1.pas" + 4) + $17
[006805D7] Unit1.TForm1.GetContactRestrict (Line 6747, "Unit1.pas" + 5) + $F
[0066C96C] Unit1.TForm1.ComPortAfterOpen (Line 2448, "Unit1.pas" + 281) + $3
[005B72CD] CPort.TCustomComPort.DoAfterOpen (Line 2377, "CPort.pas" + 2) + $C
[005B75D7] CPort.TCustomComPort.CallAfterOpen (Line 2483, "CPort.pas" + 2) + $7
[005B4222] CPort.TCustomComPort.Open (Line 1377, "CPort.pas" + 34) + $3
[0067B376] Unit1.TForm1.DoConnect (Line 5438, "Unit1.pas" + 23) + $9
[004483BD] ExtCtrls.TTimer.UpdateTimer + $1D
[0066B253] Unit1.TForm1.ActionConnectionConnectExecute (Line 2058, "Unit1.pas" + 20) + $3
[00429C1B] Classes.TBasicAction.Execute + $F
[00462731] ActnList.TContainedAction.Execute + $31
[004633A9] ActnList.TCustomAction.Execute + $3D
[0067274A] Unit1.TForm1.ActionConnectionToggleExecute (Line 3943, "Unit1.pas" + 4) + $D
[00429C1B] Classes.TBasicAction.Execute + $F
[00462731] ActnList.TContainedAction.Execute + $31
[004633A9] ActnList.TCustomAction.Execute + $3D
[00429AF0] Classes.TBasicActionLink.Execute + $34
[004578F5] Controls.TControl.Click + $4D
[0049C25C] ComCtrls.TToolButton.Click + $0
[00457D62] Controls.TControl.WMLButtonUp + $5E
[00457774] Controls.TControl.WndProc + $188
[0045A7AB] Controls.TWinControl.WndProc + $157
[004A03D9] ComCtrls.TToolBar.WndProc + $231
[00457544] Controls.TControl.Perform + $24
[0045A640] Controls.TWinControl.IsControlMouseMsg + $80
[0049DE57] ComCtrls.TToolBar.UpdateButtonState + $53
[0045A72E] Controls.TWinControl.WndProc + $DA
[0049DE9A] ComCtrls.TToolBar.UpdateButtonStates + $36
[004A03D9] ComCtrls.TToolBar.WndProc + $231
[0045A428] Controls.TWinControl.MainWndProc + $2C
[0042A8A4] Classes.StdWndProc + $14
[00477C47] Forms.TApplication.ProcessMessage + $83
[00477C7E] Forms.TApplication.HandleMessage + $A
[00477E9E] Forms.TApplication.Run + $96
[0069EA5F] MobileAgent.MobileAgent (Line 97, "C:\Projects\cvsroot.TEST\fma\MobileAgent.dpr" + 33) + $7
If some one now what to do pliz tell me, thanks |
SkippyX
Joined: Nov 05, 2004
Posts: 1
PM |
Hello. i just stumbled on this program while browsing for an idea I had. My goal is to somewhat copy the system that is in the acura TL or any other car with a bluetooth system integrated into it. My idea was to put a computer in the trunk of the car and set it up to recognize a cell phone/pda and this software seems to be nice. I have a flip up screen that will be in the dash which will serve as the monitor. The computers sound will also be running through the cars speakers, so the only question i have left is the function on this software that enables you to make outgoing calls. Is that just a remote function? or can you actually use the pc as the phone, talking through a mic and using the speakers? If so this is perfect, and if not does anyone know of a program like this or if it even exists? The computer will also be running a gps navigation program and a jukebox program so it will serve all the purposes i need in a single device all of which will be controlled using the touchscreen in the front and a few various buttons that i will wire to alt-tab through the available windows.
any information is much appreciated
Skippy. |
CyberVisitor
Joined: Dec 21, 2001
Posts: > 500
PM |
@HP
FMA recognises personal folders but not the pictures inside them (pictures inside subfolders that is). Meaning you can't assign pictures to contacts if the pictures are inside subfolders.
Also, in order to have pictures popup for my K700i when connected to FMA, I had to manually reasign the pictures from FMA. This doesn't alter the settings in your K700i phonebook though, so you can have the same settings on your PC as you K700i if you want to, but you can also have other pictures assigned on your PC. You must have the pictures in your "Pictures" folder though, not in a subfolder. |
|
|
Posted: 2004-10-19 11:28
