| Author |
Bluetooth Error "10047 in function Connect (socket)" |
SteveS
Joined: Aug 01, 2003
Posts: 227
From: uk
PM, WWW
|
I just got a bluetooth dongle it all works great but floats mobile agent wont work via bluetooth. i select it and put in the MAC address off the dongle which i assume is what it wants. i leave port as 0 as it says. but i get:
Error 10047 in function Connect (socket)
Address family not supported by protocol family
help :S
[ This Message was edited by: GOwin on 2003-11-24 01:33 ] |
|
|
-Agge-
Joined: May 15, 2003
Posts: 10
PM |
i also got BT and FMA, and i did sucsessfully manage to get it working, but i just checked oiut which COM port my BT dongle used and just took the same com port in "Use Serial Port" and then it worked fine for me. |
SteveS
Joined: Aug 01, 2003
Posts: 227
From: uk
PM, WWW
|
hum i tried every com port. my dongle seams 2 have used alot of them..
this: "Address family not supported by protocol family" to me is saying that it cant even get that far as2 check the address or port. like im missin somekind of file?
have u installed anything special? |
SteveS
Joined: Aug 01, 2003
Posts: 227
From: uk
PM, WWW
|
Some help from the ppl who make my dongle..
Stephen,
It seems that the programs you are trying
to run were meant to run on another Bluetooth
stack. Programs from one stack are not
interchangeable with another stack.
Microsoft has stated they will not certify the drivers for any
third party Bluetooth stack. |
SteveS
Joined: Aug 01, 2003
Posts: 227
From: uk
PM, WWW
|
bump |
badrat_rachael
Joined: Oct 29, 2003
Posts: 47
PM |
Quote:
|
On 2003-11-10 16:02:47, SteveS wrote:
this: "Address family not supported by protocol family" to me is saying that it cant even get that far as2 check the address or port. like im missin somekind of file?
|
|
I know this might be obvious but have you got the latest version of fma ? I had the same problem till I installed the latest version (and told it to use the serial port not the bt address).
|
GOwin
Joined: Jan 17, 2002
Posts: > 500
From: .uʍop ǝpısdn s&
PM, WWW
|
what's the brand of your BT adapter? and your OS?
|
SteveS
Joined: Aug 01, 2003
Posts: 227
From: uk
PM, WWW
|
wilcomm
XP pro
use the serial instead of the mac? i use both?
[ This Message was edited by: SteveS on 2003-11-12 00:19 ] |
jiggs
Joined: Oct 28, 2003
Posts: 8
PM |
Hi SteveS,
Bluetooth dongle usually comes with configuration utility. One of the option in the configuration is setting/adding a virtual serial port. Make sure you use the same virtual serial port in the configuration setting and fma option.
Anybody getting error message 'Command return error' when sending SMS? My environment is W2K Professional with SP1, Billionton BT dongle, fma 0.10RC2, and T610.
Thanks,
Jiggs
|
kreatiV
Joined: Jul 17, 2003
Posts: 40
PM |
Quote:
|
On 2003-11-10 12:23:22, SteveS wrote:
Error 10047 in function Connect (socket)
Address family not supported by protocol family
|
|
This error message is typical if you are trying to use a direct BT Connection and your BT Stack is not supported.
You should use the "Use Serial Port" Option instead! Just make sure that you have the right COM PORT selected under CONNECT PORT. Usually it is COM 3, if it does not work right away just try other COM PORTS and it should work.
Make sure that you have installed the Mobile Phone Monitor, which came with your Phone and it will work just fine.
|
SteveS
Joined: Aug 01, 2003
Posts: 227
From: uk
PM, WWW
|
kreatiV!!!!! u r the man!!!!!!!!!! well done!! so damn obvious too! cant believe i didnt try it!
cheerssssssssssss!!!!!!!!!!!  :D
[ This Message was edited by: SteveS on 2003-11-12 11:16 ] |
Tartin5
Joined: May 18, 2003
Posts: 15
From: Sweden
PM |
I have the same error message, but how do i find my T610 in Mobile Phone Monitor? I have enable all the comports there is but i cant find my phone... |
SteveS
Joined: Aug 01, 2003
Posts: 227
From: uk
PM, WWW
|
dont use the bluetooth option in FMA, use the serial one. |
|
|
Posted: 2003-11-10 12:23
