| Author |
for those that cant make the cable work |
nickgoh
Joined: Mar 23, 2002
Posts: 38
From: Malaysia
PM |
it got 2 type of cable for ericsson T28,29,39.........
1) Service cable
2) Data cable
service cable use for programming/flash/unlock phone but not use to transfer data between phone and pc. if u cant get ur cable work,i think maybe u get a service cable. heres the way to modify a service cable to data cable.
11 || | |||||||| 1 <-----Pin layout
How to modify :
1) Open the connector(cable) you have bought
2) what u see is pin 1 to pin 8 are grouped , pin 9 is single and pin 10 and 11 are paired.
3) now check your connector wheather they are 4 wire that connected to pin 6,7,9,10 and 11.The connection between 9 and 11 is what thats make it as a service cable.If it is ,that prove u have bought a service cable.(if not, i think u have bought a faultly cable)
4) break the connection betwwen pin 9 and 11 cafully.
5) now move the connecter from pin 6 to pin 4 and pin 7 onto pin5 then youre done.
Hope you guys success.(work at your Own risk)
[ This Message was edited by: nickgoh on 2003-03-17 23:56 ] |
|
|
Ying
Joined: Mar 28, 2002
Posts: 64
PM |
Hello Nickgoh!
Thanks a lot for that post and I was able to make a generic T28 data cable work for those ericsson programs. The data cable I bought was actually a test/flash cable and thanks to you and with transferring 2 wires and cutting a jumper it worked flawlessly yahoooooooo!
Btw was able to get some more data regarding that convertion at
http://xentrax.narod.ru/eng/320pinouts.html
Unfortunately read your post too late cause i already had bought an original DRS-10 cable but no problem, I can still use the generic on my laptop whenever I'm on field.
Thanks again  |
Ying
Joined: Mar 28, 2002
Posts: 64
PM |
Btw nickgoh...
do you have any software or links that may work with my R520 or T28 with regards to unlocking or activating net monitor (like those of the Nokias), etc?? which will work with thesson test/flashing cable?
Thanks again! |
nickgoh
Joined: Mar 23, 2002
Posts: 38
From: Malaysia
PM |
i think u can found it at here
http://mobile.box.sk/manufacturer.php3?newsprj=ericsson |
Ying
Joined: Mar 28, 2002
Posts: 64
PM |
@nickgoh
Thanks for the info on that site!!
Unfortunately just converted my cable for modem use hehehe, wanna tryout the network monitor and unlock my fone |
all8
Joined: Feb 28, 2002
Posts: 372
From: Malaysia
PM |
I posted this in another forum
I purchased this HBH-10 Bluetooth Handfree sometime ago, it comes with a DBA-10 Bluetooth phone adapter. This adapter was used together with my old T28 Phone (Attached directly to T28). Since I bought my new T68m, DBA-10 has become obsolete.
I'm not sure you guys can help me to configure a cable to connect my DBA-10 to a notebook USB 0r Com port. Instead of paying big bucks on a new Bluetooth PC Card or USD Bluetooth device, I could utilise this left over product for something useful.
Also, I need to find out is there any Driver available?
Thanks in advance
[ This Message was edited by: all8 on 2002-04-05 16:35 ] |
dazmcc
Joined: Apr 28, 2002
Posts: 121
From: east mids,uk
PM |
nickgoh youre the man!ive been pulling my hair out reinstalling stuff over and over,turns out id a service cable!easy conversion though,cheers mate! daz:lol: |
imho
Joined: Aug 27, 2002
Posts: 174
From: Brussels
PM, WWW
|
still doesn't work :/
But I have a R5A firmware, and the Mobile Phone Monitor is at R4A version, maybe I have to wait for the R5A software version?
|
mike91k
Joined: Oct 18, 2002
Posts: 6
From: Thailand
PM |
I currently have t68mc with R1B software, I'm probably going to upgrade it using ericsclient. But i want to backup all the phonebook, messages, pictures first. My question is, after i convert the t28 service cable to data cable and backup all the stuffs, is it possible to convert back to service cable so i can flash my phone? and will the backup softwares work with my phone (R1B software)
Service cable for t28 is quite cheap here, i could get it for around US$5
thanks |
russtproof
Joined: Mar 19, 2002
Posts: 283
PM |
hey, how did you manage to disconnect and reconnect the cables? is there a 'domestic' method without using a solder?? 
oopsies.. sorta screwed my cable up.. hehe 
_________________
.. current fones: T68i/T68/T65 ..
[eRicsson.. *drool*]
[ This Message was edited by: russtproof on 2002-10-23 16:31 ] |
blackdragz
Joined: Mar 08, 2004
Posts: 21
PM, WWW
|
and if i do this thing with my datakabel wil it work on the t230 or p600 or the rest of those phones?  |
adriandaz
Joined: Mar 16, 2004
Posts: 34
From: UK
PM, WWW
|
Hello, I have a serial data cable, can anyone tell me how to convert it into a data cable?
thanks,
Adrian. |
jcwhite_uk
Joined: Feb 18, 2004
Posts: > 500
From: Dorset, UK Phone:Xperia Z1
PM, WWW
|
@adriandaz
You say you want to make your data cable into a datacable? do you mean data cable into service cable? |
|
|
Posted: 2002-04-05 00:22
