| Author |
problem with my hbh-35 voice answering command |
debrizio
Joined: Oct 19, 2003
Posts: 8
PM |
currently im using my hbh35 bluetooth headset with my T610..evrything seems to work fine but i still cant get the Voice Answer Command work...
1) i tried record the command and activate it... but whenever any calls coming in i cant answer it using the voice command..
2)some people said have to record the voice command using the headset..but frm what i understand the headset cant record any voice..
can anyone please help me on this matters??thanks alot |
|
|
Universal Exports
Joined: Mar 03, 2003
Posts: > 500
From: Sweden
PM, WWW
|
I too have problems with a HBH-35.
- When I answer throught the headset. The sound isn't transfered to it, but it stays in the phone. When I then try to transfer it to the headset it sometimes works and it sometimes just disconnects.
- The sound quality is really crap.
 have said that they are about to release an upgrade that will solve this last problem though...
I have a T610 but the headset is eventually going to be used with a T68m/i (christmas present). I've told the owner of the T68 that he should upgrade the phone though. Will it work with it or is the headset faulty?
"The distance between insanity and genius is measured only by success."
-Eliot Carver |
shug
Joined: Nov 05, 2003
Posts: 330
From: Sweden
PM |
I had a problem with just voice answer untill I discovered that I didn't have bluetooth enabled under - Settings/voice control/voice answer/environments.Bit of an unnecessary menu in my humble opinion. |
CrackerJack
Joined: Apr 28, 2003
Posts: > 500
From: NE of Borneo to the NE of US
PM |
Quote:
|
On 2003-12-09 03:38:12, debrizio wrote:
2)some people said have to record the voice command using the headset..but frm what i understand the headset cant record any voice..
|
|
You have to use your  headset in recording all voice commands. Avoid recording commands using the phones mic.
First, activate the HBH to phone connection. Do this by going to accessories and then select your HBH headset. You will see the Headset icon on the top left of your T610 screen.
From there, you can change menus and start recording all the necessary voice commands and names. After doing this, your phone should recognize your command coming from the headset.
INTEGRITY
Without it...
Everything else is irrelevant. |
redragon
Joined: Apr 15, 2003
Posts: 26
From: Metro Manila, Philippines
PM |
@CrackerJack Do you know how to make voice recording using hbh 65 & P800? somehow i cant also do recording from this headset.
This message was posted from a P800 |
bhang
Joined: Jan 03, 2003
Posts: 97
PM |
I have never gotten my voice answer to work with my bt200 & t68i and can rarely get a V.C. recorded via BT, more often than not it locks up the phone and headset until the t68 battery is removed... I have not tried to manualy connect them and try to record since I upgraded my FW
Bhang
|
CrackerJack
Joined: Apr 28, 2003
Posts: > 500
From: NE of Borneo to the NE of US
PM |
@redragon
Sorry pre, I don't have the P800.
INTEGRITY
Without it...
Everything else is irrelevant. |
BigFeat
Joined: Mar 14, 2003
Posts: > 500
PM, WWW
|
You're suppose to use the phone mic when recording voice commands. How can one trigger the BT mic to record a voice command? Not sure why cracker- suggested that.. At any rate, all of these headsets in the pic below are interchangeable with the P800/P900. I actually have used some of them with my T68i. So go to your contact -> choose edit contact -> click the last tab -> voice command -> highlite the desired # and click 'record' (from the phone's mic). That's all it takes. I use the voice command daily as I have my phone tucked away most of the times. Voice command has worked with every headset pictured below. Again, with my P800 and my P900.
|
debrizio
Joined: Oct 19, 2003
Posts: 8
PM |
still cant get the voice answering command work...anyway i still cant get the bluetooth headset to record my voice.. |
BigFeat
Joined: Mar 14, 2003
Posts: > 500
PM, WWW
|
I thought you'd figure out by now that it was not possible. Especially after alluding to that in an earlier post. Moreover, if your manual don't say it don't expect it to do it. When you click that 'record' button on the phone do you see any indication that the phone is attempting to make a connection with a BT device??? So there's your answer, again.
|
CrackerJack
Joined: Apr 28, 2003
Posts: > 500
From: NE of Borneo to the NE of US
PM |
I suggested recording of voice commands thru the headset instead of the phone because recommends this. I read this on the HBH-30 manual.
On page 12, under Troubleshooting:
Voice commands not working properly
If you fail using the voice commands you have recorded through your phone, record them through the headset instead.
INTEGRITY
Without it...
Everything else is irrelevant. |
shug
Joined: Nov 05, 2003
Posts: 330
From: Sweden
PM |
If you press your headset button a few seconds before you record then your headset will be active when you speak . It can take practice with the timing but I don't believe it makes any difference . |
kalo93406
Joined: Jan 11, 2003
Posts: 31
From: California - Central Coast
PM |
I was having problems with the HBH-35 too. Couldn’t really get it to work well at all. It seemed I would have to go to “paired devices” and “connect” the hbh35 from my phone every time. Well It just wouldn’t work and was trying to investigate. I saw how to “reset” the hbh35 in the manual and did that. Then deleted hbh-35 pairing from my phone and redid the pairing process. Well this must have done something because it is working quite nicely now. I can even voice “answer” from my hbh-35. I tested from my home phone… called cell… cell rings… hbh-35 rings shortly thereafter… I say “answer” and the call is answered on my HBH-35.. Or I can say“busy” and the call is forwarded to voice mail…It’s great.. Don’t give up.
-reset hbh-35
-delete and then do another “pair” for hbh-35 to T68i
-Ensure T68i Bluetooth is set to “ON” not automatic
-Ensure “bluetooth” is checked at “Settings::Voice Control::Voice answer::Environments”
I also did a master reset on my phone, not sure if it was necessary, but I did it and redid all of the voice control stuff. I wasn’t’ able to record the voice commands using my hbh-35 mic, but it doesn’t seem like a problem to do them directly on the phone.
I don’t think “Caller name” is going to work on the hbh-35. The lag is to long … I did hear a name once, but it doesn’t seem to be quick enough…
Cheers… Roger
|
gmb69
Joined: Dec 05, 2003
Posts: 2
PM |
With my hbh-60 and p900, the answer call works fine. But when i've to make a call, the contacts call doesn.t work. |
Universal Exports
Joined: Mar 03, 2003
Posts: > 500
From: Sweden
PM, WWW
|
@kalo93406
Thank you very much. Intelligent and informative! 
"The distance between insanity and genius is measured only by success."
-Eliot Carver |
|
|
Posted: 2003-12-09 03:38
