Unlock your phone for FREE! (6230, 7610, 7600, e616...)

Posted by rajenvara
p900 Lover: I used this site to unlock my Nokia 7600, and it works fine on all gsm networks. No problems at all. Using it on o2 at the mo.

Posted by fatreg
at P900 lover,

i unlocked mine there and it still looks for a £g signal, if you bought your 7600 on 3pay, you will always have this problem unless your network turns off their 3g signal! or you have your 7600 flashed with euro software,

best bet is take it to your local CPW and tell them that because you have poor 3 signal at home, they have told you that you can flash it with euro software so it will only work on O2, then unlock it again and hey presto!

fatreg

Posted by MONO2GO
I see there are a lot of questions about NEC e616v, e616. Just to clear everything. The old NEC "trix" that already have been explained in this thread works on old software versions. It will NOT work on newer versions.

Then there is a different between the old instructions for e616 (depending on software version. Many e616 are having the same software as the e616v model) and e616v. So check your version in your phone.

How to check version
*#2820# check version

If you are having the version acpu:125.56.07 ccpu:c623.r0v. Then it´s the e616v instruction you should use. If you are having ACPU:A025.63.11 CCPU:C623.R1Y.Q or ACPU:A126 00.02 CCPU: C623R2A and above (what I know) then none of the instructions will work.

Posted by p900 lover
im having problem unlocking my 7600, under the netwrok there are 3 tmobile, which 1 do i go for?

and how do i find out the box serial ????

thanks

Posted by Leks
I think fatreg described how to find box serial earlier in this thread

Posted by MONO2GO
To find out which boxserial to use press *#0000# then you will get a software version and a date.

This is not an "black and white" thing.

Depending on the version and the date you can choose a boxserial that hopefully will work.

If your phone are between 2003-01-12 -> 2004-01-01 then the moste common 33820 (also called v2) will work in moste cases.

Read this and then I think that you will understand what boxserial are for.
http://www.unlockme.co.uk/codesexplained.html

//

[ This Message was edited by: MONO2GO on 2004-11-13 15:34 ]

[ This Message was edited by: MONO2GO on 2004-11-13 15:35 ]

Posted by p900 lover
thanks for that,

i will post back how it goes when i get my new sim from 3

Posted by wapchimp
NEC 313 unlock is long winded.

Easy way if I remember is to put 2g sim in, diall 112 (emergency call) phone will say cannot make call in 3g mode, switch to 2g? (or similiar) then quickly hang up!

Then you can make voice calls only, not text or use wap as settings o handset are 'software locked'

Posted by fatreg
How do me make this sticky??

it needs to be!

fatreg

Posted by Leks
PM laffen

Posted by bak1950
[quote]
On 2004-08-18 21:21:06, Leks wrote:
NEC C313, C616 , e616, e313 is also avaible to unlock but text is in Swedish: http://www.trycktill.com/nec_swe.asp

I´ll translate l8r

any chance of a transalation of nec unlock for 616v into english please

Thank you

Posted by Leks

Quote:

On 2004-10-09 17:32:42, Leks wrote:
"Unlock ur 3g phone!
Unlock NEC C313, C616, E616, E313!
Intsructions for unlocking NEC e616v u will find here (but read
the information down as it even is compitable with e616v and
e616 with upgraded software): Link to e616v
2004-October-08
3 have (what trycktill.com as been told) free upgrade of the softwares in
e616, e616v och Extreme. When u upgrade u´ll get a software
that the unlock method don´t works with. A exemple of a
software that dont wprk is ACPU:A025.63.11 CCPU:C623.R1Y.Q

These instructions is a "temporary changelock" of the sim-card in the phone.
The instructions is also depending of which sofware u have in your
3G phone. So if it dont works in just your phone u´ll have to search at other sites or
w8 until other information is known. Trycktill.com don´t recommends u to
try with different numbers first time and other another
time, it wont help. Do u change numbers from 1st to
2nd time the risk is much bigger that u get "SIM-block" (locks the phone to
one card).

This is not a good unlock method and
recommends only if u must change to a 2G card.

Known symptoms after u used the instruction (by all testers):

When u use ur 3G phone with a 2G card u will ofcourse not be able to use
all functions in ur phone as u can with a 3G card.
It has came information about u sometimes can´t send SMS,MMS or get into the phonebook.
SO if u miss some function we will be glad if u informed us but we can´t unfrtunatly not
help u with getting it woking with a 2G card.

THE INSTRUCTION:

xxxxxxx = any numbers (for ex. 12345678), the numbers u choose
will be your ner unlock code if u want to change card again.

1. Put in a 2G card
2. The phone will show "Insert sim"
3. Enter #4960*xxxxxxxx# and "send" (nothing that u write will be shown in the display)
4. *4960*xxxxxxxx*xxxxxxxx# and "send"
5. Restart the phone.

Remember ur code until if u want to change card again.
Would u forgot the code u will only have 3 tries to find the right code again.
If write wrong 3 times u´ll get "SIM block" ANd it will be locked to the card u had before.
We have also information about some could change between 2G and 3G card
witout enter the codes again. So its different
from phone to phone.

Other NEC codes which is found on the internet. Exactly which models each code works
on we cant answer but the codes we have tested works on the
e616v model. It may work on other models but we dont recommend u to try. We´ll
show them here it they who maybe knows better and we can not answer at any question about
this codes.
*#3210# SP lock
*#8140# Corporate lock
*#4960# check sim card lock
#4960* password # turn off sim card lock
*4960* password * password # lock sim card
##4960# lock sim card(can"t be activated)
*#7320# check network
#7320* password # turn off network lock
*7320* password * password # lock the network
##7320# lock the network(cant be activated)
*73738# reset defaults
*#2820# check version
*#5830# digits matrix (changes after attempt to enter codes)"

Posted by afterburn
hey guys... what i got from that translation is that by that method you can unlock nec e616v. So finally there is a way to ulock nec e616v... i've been wayting so long for this.
Did anyone of you try this new method?
please post if it worked for nec e616v !!!!

Posted by wapchimp
@Leks I already posted a far easier way to 'temporary unlock' NEC

Posted by roby_rabbit
How can I un-lock my SPV C500?

Posted by wapchimp
Ask orange or try google

Posted by leader
Hi,

is it possible to unlock a nec e616v?

Posted by Leks
it depends on which firmware u have...

Posted by p900 lover
im sick to death with my nokia 7600, i cant unlock it,

will anyone who has unlocked their 7600 be kind enuf to let me pm my fone detales and they will tell me the unlock code, because im doin suthing wroong and i dont know what.

Posted by Leks
here is a program for unlocking nokias, haven´t tested it...
http://www.download.com/Nokia[....]l-NokiaFREE&subj=dl&tag=button

Posted by milay
anyone know where i can get unlocking code/software for sharp tm150?

Posted by sanjida
in confused

how can i unlock me NEC e616 has anyone tried somthign that actually works??

sarah

Posted by sanjida
heya people, does ne1 know if i can change from a 3G sim to an O2 sim? i dont think its possible, why did i buy a bloody 3g phn, cant find anyone who does it

Posted by deateam
anyone help me! i did what u told me,, but it didn't work.
I'm in VietNam now,,,, (PAcific Asia) and use a 2,5G simcard.
this is my intro:
IMEI: 353182/00029008/9 SV18
SW: ACPU: A126.00.03
CCPU:C623.R2A.2

can u help me with a bit little kind?
so thanks anyway.

Posted by Leks
I´ve unlocked a 7600 on 3 UK for a guy. I used the "Orginal Codes" for box serial.

Posted by Frost40
uh guys i tried to unlock my Nec E616 with the unlock code posted on trycktill.com but it doesnt work i used the *#2820# key and found the following software version:
ACPU:A026.00.05
CCPU:C623.R2A.2

any help would be welcomed.

wapchimp said he posted an easier method to unlock the Nec E616 anybody knows where it is located?

thanks.

Posted by Leks
it will only work on the first software of 616v i think...

Posted by alok
hi
how cane i unlock sonyericsson T610
plz help

Posted by Leks
u need cable for

phones. For t610 a terminator dongle.

Posted by parsnip
How do u unlock the nec c313

Posted by parsnip
How do u unlock the c313

Posted by Lil Dudette
Heyy people....Listen i just wanna know how u unblock t610 so that u can use another sim card with different networks coz at the moment i can onli use it with t-mobile

[ This Message was edited by: Lil Dudette on 2005-04-27 10:22 ]

Posted by Sammy_boy
@dudette - unfortunately as someone said a few posts ago, you need a terminator dongle to unlock a T610, either that or take it to a local phone shop or market trader (that you trust or is quite good) to get it unlocked. Unfortunately Se's can't be unlocked using a code like Nokias.

Speaking of codes, I want a Motorola V500 unlocking, apparently they can be unlocked using a code calculator like the Nokia one. Does anyone have one or access to one at all?

Posted by Lil Dudette
What iz a terminator Dongle. Soz but i aint realli dat gud wen it cumz 2 fones

Posted by masseur
there is a terminator dongle for sale in this thread and there is a picture there so you can see what it looks like

Posted by Lil Dudette
Oki Doki

Posted by Si_V80
I have modified my NEC usb cable to become a service cable. But i dont have any working software to generate a code for my 616v

. Could anyone help me please? Thanks alot

Posted by wbutt2003
I have just bought a vodafone locked 7610,if i was to unlock it free from the trycktill website would it damage my phone

Posted by jenbones

Quote:

On 2004-08-18 21:39:10, 50Cent wrote:
Quote:

On 2004-08-18 21:15:25, Leksandfan wrote:
Almost all Nokias, Panasonic G/D5X and Siemens ST55, CL5X.

http://www.trycktill.com/eng/

Good link?

_________________
Owner of a z1010.

My wap site: http://leksandfan.wap.nu

[ This Message was edited by: Leksandfan on 2004-08-18 20:16 ]

amazing link but when i proceed to the next stage it changes to sweedish.. however, it pretty easy to figure out so not much of a problem.

Cheers
Twista

cheers
twista?

You in th wrong company, death-row, g-unit, get your facts right, your 50 cent!!

Posted by kk.226
I Just unlocked a 6230 which was on orange, it's now on all, VERY good site!

Only took about 40secs to do, very easy

Good Find!

Posted by user-6230
kk.226

What box serial are you using , i tried my get error code, my sw ver is. v-03.15

Thanks

Posted by user-6230
Hi kk.226

Finally I got correct code to unlock my with box serial v2.

Bye.

Posted by kk.226
*Bump* (Because it such a good site!)

Any in reply to the above 2 posts... your welcome... i guess?!

Posted by Sir-SonyEricsson-man
Just feel inn what it need..

At the end Put in the IMEI nr and check the box "Godkänn genom att markera kryssrutan:"

and then push generate..

_________________
Trustes sellers

my own site

[ This Message was edited by: SIR-Sonyericsson-man on 2005-08-26 02:24 ]

Posted by Djrack
1. Stäng av din telefon och tag ut ditt SIM-kort
2. Starta din telefon igen
3. Tryck följande: *#06# på din Nokia telefon
4. Knappa in ditt IMEI-nummer i fältet nedan (15 siffror)

In english:

1. Shut down you mobilephone, and take out your SIM card.
2. Restart your mobilephone
3. Push this code: *#06# on your Nokia mobilephone
4. Push in your IMEI-number in the field above (15 chars/numbers)

Posted by Bobby Deazy
sorry to up, really need to see if anyone can generate a subsidy code for motorola V600

hopefully free like the nokoia calculator for this thread

let me know what you can do.

Posted by fatreg
you canny do it for free....

Sorry.

fatreg

Posted by Bobby Deazy
ah well trying to save a friend money, broke my phone gave me a v600 to use for the time being and its locked

i remembered this site since i unlocked a nokia phone before for free, sucks there is no free motorola ones around yet

charging people to unlock damn nasty shit

Posted by rawkillz
do someboy know how to unlock a sony ericsson k800i 4 free ? ;D

Posted by ayejatt
you can patch unlock it using XS++