Posted by milind_001
Has anyone found these?
I have K700i with vodafone f/w.
I have found following text labels in K700i service menu.
"Memory stick write protected, cannot edit files"
"Please insert memory stick or select save to phone in camera setting"
"Memory stick not formatted"
"Memory stick not inserted"
Does this mean that memory stick was supposed to be supported in K700i?
Posted by hazart
@milind_001
No. All SE phones share almost the same set of text labels.
Posted by Burkey
I am so pissed off right now.
Have done many updates with SEUS before. Just ran an update there now. It said update complete. All good right?
Typed in my PIN.. the screen went white and flashed, then flashed again, then switched off. It does this every time. I've removed the battery, SIM, tried a different SIM, tried recovery, tried a re-update, none of which work. I wish I could try an older update again. Anyway, I've sent an email to SE, looks like my phone is screwed, so I await a reply. Can they do anything for me? :S
It was an unbranded phone, and I was using an O2 sim in it. Thank god for old Nokias for now...
Posted by Burkey
In reference to my previous post, I had to recover, and then reflash my phone with Da Vinci. I picked the T firmware rather than Y just to be on the safe side. Its all tip top now, and I've got rid of the shutter sound
(thanks da vinci!) Unfortunately it cost me £7 tho 
Posted by FluffyOne
Upgraded to R2AY004 on SEUS. Orange UK branded phone. Anyone else seeing that the call cost menu (call timers, sms and mms counters) is missing from settings?
Am I losing my mind? Anyone have any clues what's happening here?
Posted by ma102ma
I'm having a problem with the DSS25 being recognised, I installed the DSS driver for the P900 from the SE site, and I installed the seus_setup119.exe
When I get to the Terms and Conditions, it says 'No Syncstation found!' and has two buttons for 'Try again' and 'Cancel'
What have I done wrong???
edit: got it working, now have r2ay004
[ This Message was edited by: ma102ma on 2005-08-18 20:13 ]
Posted by collegea
R2AY004 solved all my problems. I bought an unlocked K700i with firmware R2AE033 about 5 weeks ago. Whenever I connected my Palm Zire 72 or Tungsten T5 to the Internet via bluetooth on my K700i, the phone would freeze after I would disconnect the bluetooth on my PDAs. I also had a hissing sound sometimes on phone calls. I sent the phone to the Sony Ericsson Service center for repair in North Carolina (USA) one day after I received my K700i from BestPriceAudioVideo.com (online retailer). I got the K700i back a week later stating that "my problem could not be duplicated" but a "firmware upgrade was given" (for free). Since then, the phone has worked like a charm in every respect. And I use all aspects of this phone.
The K700i is the best reception and best phone I've ever had.
Isn't the Opera Minibrowser outrageous? Much better than Webpro or Blazer on my Palms! I think Palm is going to get hurt big time from Opera mini!!!!
PS Sorry, but I originally posted this in the wrong forum.
[ This Message was edited by: collegea on 2005-08-22 20:55 ]
Posted by Phildon008
I've flashed my K750i with davinci's R1L002 with
the original cable DCU-60
Can I flash my old K700i with it's cable DCU-11 ?
Any Idea ...
Posted by glfngmble
Does anyone know it this is availible in the US through Cingular? I've tried it before and it said that it is not offered by the provider.
Posted by Cornholio_666
try it again now, because for a while people with branded phones couldn't use Sony Ericsson Update Service
Posted by glfngmble
Sucks, still get this message:
"Your device is not permitted to use this service
Your operator does not approve the usage of this service for this device.
We look forward to assist you again soon.
Thank you for using Sony Ericsson Update Service!"
Posted by mike_k7
| Quote: |
|
No,you can't. Only with sync station
Posted by ma102ma
ok, some of you guys may have heard about this by now, question is, when are we going to see this feature enabled in a new firmware update for K700i (assuming we need an update)? Can someone elaborate on exactly how this new standard works?
http://www.deviceforge.com/news/NS7351692307.html
Posted by darrengf
| Quote: |
|
Well Fluffy, Im happy to say that you are not going out of your mind !!
I have also done the update my self and lost the call timers too and im on Orange.
Its pointless is emailing SE as i will prob know what they will write before hand. It will be something like blah blah blah blah. Regards xxxxx
We will just have to hope for the next update.
Oh well back to me K750i
Posted by FluffyOne
| Quote: |
|
It's possibly orange-specific then. Worth a call to customer suport to see if they're aware of owt. I'll report back once I've (got around to it and) done it.
Thanks.
Posted by happykhan
@mwarner
How do i know weather my phone is unlocked or not?
I press <**< and there comes pictures of 5 open locks?
Does it mean that my phone is unlocked?
[ This Message was edited by: happykhan on 2005-09-03 14:44 ]
Posted by mwarner
@happykhan
Yes, your phone is unlocked
Posted by happykhan
@mwarner
Thanx 4 ur answer
just another Q
with my unlocked phone which is also unbranded will i have any problems updating my fimware at SEUS? (What's this thing about CDA?Does it depend on my CDA)
Does SEUS updating depend on my operator(although mine is unbranded)?
Posted by mwarner
In theory you should have no problems updating through SEUS with an unbranded phone. The CDA is used by SEUS to determine the firmware you will receive.
Posted by mwarner
Updated the first post to match the K750 / W800 Firmware Overview layout
Posted by Marcellus
Help!
I need firmware files for k700 R2AY004 to flash it by myself.
Can anybody give me the link?
Language files must include russian.
[ This Message was edited by: Marcellus on 2005-09-15 17:10 ]
Posted by IzZy_ban
| Quote: |
|
Posted by happykhan
@ mwarner
Is it possible to update K750/W800 only with the usb cable provided in the package(withut using DSS25)?
Posted by mwarner
Yes, you use the supplied USB cable. The DSS-20/25 no longer works as the connector has changed between the K700 and K750.
Incidentally, SEUS does not currently support the W800.
Posted by Sunnie
anyone know its possible to update an Orange branded K700i with the website? Its older then 1 year and requested the unlock code from Orange, so its unlocked, but still Orange branded.
Posted by marsse
can i flash my k700 using irda ? is there a way ?
Posted by mwarner
@Sunnie
"anyone know its possible to update an Orange branded K700i with the website"
Yes. See the first post.
@marsse
"can i flash my k700 using irda ? is there a way ?"
No, absolutely not. You can't update the firmware without some sort of cable (e.g. DSS-20/25 for a SEUS update).
Posted by bruce1ee
i've just bought my k7i last month and it has the new firmware: R2AY004
the question is, my ITP SW version:
CXC 125 813 R2F
why it is different from i've seen that ITP SW should be R1T not R2F ?
and.. what is ITP??
tq
Posted by Marcis
I just upgraded my K700i using
update service
and ITP ver is: CXC 125 813 R2F
Posted by Marcis
| Quote: |
|
ONLY DSS-20/25 will do. "Just" USB or COM cable (DCU-11, RSU-11) does'nt work.
K750 and W800 has new type of connector which allows to use supplied cable, for previous generation of phones (K700, S700, P900, P910 dunno which else) you have to use DSS-20/25
Posted by happykhan
@ mwarner
I'm planning to upgrade my K700 to K750
1)Is it possible in k750 to mark several files and send them via BT(i.e.:is it possible to send more than one file in k750?)
2)Is a card reader provided in the standard package?(gsmarena says so but in mobile-review there wasn't such a thing)
3)Is the playback volume in k750 louder than k700?
4)what about fast forwarding during video playback?available now?(I know it has fullscreen)
[ This Message was edited by: happykhan on 2005-09-21 14:17 ]
[ This Message was edited by: happykhan on 2005-09-21 14:26 ]
Posted by dts-phile
Hey there,
Answers:
1) yes
2) no...
3) yes, but k700 was OK. K750 has a much better speaker.
4) Possible: not as nice as the one in PSP, but still intersting. Medium speed (FF or REW) only is available, so if you want to reach the 40th minute, for instance, of a video clip... well, gotta keep pressing for a long time!
Overall, it is a wonderful phone, espacially with the latest firmware which really increases quality.
Cheers !
Posted by happykhan
@ dts-phile
Thanx very much 4 ur answer
It was really helpfull
Posted by happycheesecake
I'm having issues updating a mate's K700. He's got an O2 branded phone, firmware R2A041.
I have a working DSS-25. It's updated a number of
phones before, so there's no issue there. The latest firmware is downloaded, but then this K700 keeps coming up with "Error communicating with the device"...
Before you lot start with the "use the search", I've tried the following:
- Four different PC's, one a brand new box with no anti-virus or firewall.
- Different versions of Sun Java
- Phone fully charged.
- Removed sim card.
- Plugged DSS-25 into different USB ports.
Any ideas?
Posted by samwel
I had the same problem.
Used "Sony Ericsson Remote Unlocker 14.0" with my DSS25.
The message you get means the phone need finalization.
My problem was really that DSS25 didn't work reliable in
speed higher than 57600.
If you're not in a hurry please try to flash with lower speed.
Posted by dualist
| Quote: |
|
Yeah this happened to me constantly. I had to use Davinci in the end which worked fine. Now running R2AY004.
Posted by Aargh
The link (first post) K700i Online Update Service is wrong.
[ This Message was edited by: Aargh on 2005-10-28 00:40 ]
Posted by ZeluR
| Quote: |
|
I'm having the same problems - what to do? I talked to a guy at support and he said turn off the firewall, but that didn't help, try with another computer (tried with my laptop today but that didn't start the update service) then he thought that it could be something wrong with my phone... But I don't think there is any problem with my phone. It must be something else.
Need some help and advice - TIA
Posted by eNzO-VVTi
i had the same problem and you mentioned ZeluR
i then used Davinci service and it has been flashed successfully with R2AY004
Posted by eeiba
i've given up trying to use seus so i askes a friend of mine to debrand and update the firmware using stand alone software. He was able to debrand and upgrade the firmware, but the latest he s got is R2AE033 so I asked him to proceed and i'll again try SEUS to upgrade to R2AY004. Of course R2AE003 has lot of improvements over my previous firmware R2A041, but I want the latest firmware on my phone. But now when I try to upgrade using SEUS, it just gives me the message "your device is not permitted to use this service." Can someone enlighten me on this. TIA.
Phone Software INfo:
R2AE033
prgxCXC125821_EU_1_C
LCD SW versions
Main display
Current: 200406041
Camera SW versions
Camera
Current: 3.10
ITP SW version
CXC 125 813 R1T
Customization
CDA 102286/1 R8A
cxc125822 R2AE033
ASIAN_LAT_1
_________________
Posted from a Sony Ericsson K700i
[ This Message was edited by: eeiba on 2005-11-09 02:50 ]
Posted by alexlt
R2AE033 is the last FW for K500 for Spanish language or can i upgrade to R2AY004 ??
Posted by mwarner
Fixed some layout issues and the link to the K700 SEUS.
Posted by Squads
Ive just tried to use SEUS but once ive checked all the boxes for the preperation phase, the page updates and is blank apart from the SE stuff around the edges - the window in the middle is blank and NOTHING happens!! Anyone else know whats going on? Its all prepared and ready to go, i click next/ok but the page refreshes with nothing there, and nothing happens. Ive tried 3 or four times, with and without firewalls on? Anyone help?!
Posted by mb-new
http://www.microengineers.cc/cruiser/news.php
Cruiser support site has R2CA001. Please someone check on SEUS
Posted by tinodj
Trying to update p910i....
So...
Uh oh!
Sony Ericsson makes attractive mobile phones and mobile phone accessories, and develops powerful mobile computing technology.
Unfortunately, the server encountered an internal error and could not complete your request. Please check that you typed the address (URL) correctly.
If this error recurs, please try again later when we hope the problem will have been
Anyone know, what the problem is...
Posted by mb-new
The problem is that the server encountered an internal error and could not complete your request.
Try later and that's all. It happens sometimes with SEUS server.
Posted by tinodj
2 days internal error? And exactly when I decide to upgrade... wtf
Posted by Krubach
Still down... just tried.
Posted by tinodj
it works now
Posted by hazart
Has R2CA001 been released on SEUS yet? Many remote flashers have it now.