Posted by Merovingian
Hi guys.. Since the server with the pics to the first guide on how to take the t610 apart crashed, I made a new one.. hope it's good... !!! USE THIS GUIDE ON YOUR OWN RISK. I'M NOT RESPONSIBLE FOR ANY DAMAGED PHONES!!!
1: Remove the battery cover
2: Lift here and here with your fingernails or something that's made out of hard plast.... I don't use metal things because I don't wanna damage the cover:
3: Push the cover away from you:
4: Lift up here carefully till you hear a little click and then simply remove the green part ( antenna), but be careful
5: Remove the 4 torx screws.. For this you'll need an T6 screwdriver:
6: Now use your fingernails or a thin plastic thing and slide it in between the cover and the white part.. Move it all the way up untill the cover goes off.. Be careful and don't stick it to far inside. When the cover is off on one side just take it carefully of:
7: There you go...:
_________________
for Norwegian users: http://www.freewebs.com/ocean[....]%20Arne%20Går%20Mot%20Døra.mp3
[ This Message was edited by: Merovingian on 2004-05-24 16:40 ]
[ This Message was edited by: Merovingian on 2004-05-24 16:51 ]
Posted by Sammy_boy
Thanks for that, I'm just about to recieve a T610 that will need either it's screen plugging back in or a replacement one buying, and I'd forgotton how to take the black aerial cover off!
One other thing as well, make sure you don't get any fingermarks on the inside of the front of the facia - or you'll be taking the whole thing apart again to get rid of the offending fingermark!
Posted by Merovingian
@sammy: yeah, I know.. got fingermarks on the inside ones and f***ed upp the whole screen
Posted by MonkeyMann
Posted by folling182
Nice tutorial merovingian!
[ This Message was edited by: folling182 on 2004-10-17 14:58 ]
Posted by folling182
here a little addition to the thread.
I did this on my one month holiday to italy, I had done it loads of times before, but sadly this time the microphone died
so i had to get a new k700 .
Sorry about the size of the picture
Could somebody please confirm that the little rubber thing next to where the sim card goes, on the "skeleton" (white piece) of the phone, is actually the microphone.
_________________
Rape is no laughing matter..unless you're raping a clown.
[ This Message was edited by: folling182 on 2004-10-17 15:01 ]
Posted by masterp
@folling182 , the mic is in the left bottom , the round rubber thingy like you said
Posted by knight4led
wow, this tutorial would have been really useful about 6 or months ago when I wanted ro repair my damaged T616. I never quite figured out how to get that antenna cover off though.
Posted by goldenface
I always thought that little thing was a battery?
Posted by thestash_16
dude the pics arnt comin up. my on button is jammed down and i cant get it to turn on
Posted by iruoy
Wow thanks! My mic was f*cked up. The inside was really dusty and after some blowing en pushing with a screwdriver I managed to get rid of most of the dust. Think the dust got between the mic and the two circles thing, so the signal was bad. Now I'm back up!
Posted by jenbones
Nice guide!!
Posted by t105crazzy
Thanx 4 that mate.pretty interesting guide
an for those of you struggling with the pic quality of the guide heres another one.
_________________
T28s T105 T610 [ This Message was edited by: t105crazzy on 2005-07-11 10:29 ]
Posted by max_wedge
here's my t610
after high speed encounter with a wall (insides working in a new case)
Posted by baja462
ncie tututorial, but it's never a good idea to take apart your phone unless you know what ur doing, there are always things attached to the outside cover when it's not supposed to be cahnged
Posted by Pradhika
Learnt it alright. But i wish such a situation never arise to me.
Posted by max_wedge
baja462, ah try and stop me
I've pulled apart every phone I've ever owned (and quite a few I didn't own). Never had any problems, infact fix them often...
Posted by sugr_puz
baja462 - you missed a good opertunity to be an old maid...
Posted by chinkidude
hey...
i tried removing the case...
and i was wondering....
what does the infrared port look like? there isnt anything inside the gap of where it is. i wasnt sure if i lost it...ahaha
Posted by goldenface
The plastic at the top end of the phone is thinner and this is where the IR port is.
Posted by shyes
Tough Phones these T610's ey, But I am spewing, I broke the freakn screen so now it might cost me $70 (AU) to repair it,. I still cant take off the top back cover, I am paranoid of braking it, hehe
Posted by kramsnave
Great guide solved a big problem the top piece a the rear of the phone does come off easier if you remove the silver lense cover first it pulls off
Posted by rdxl9
Thanks for the tutorial. I took my t616 apart after I dropped it and it wouldn't charge anymore. Figuring I had nothing to loose by opening it up, I took it apart and found that a little piece of dirt (I guess) had wedged it self between the charging contacts inside the phone. I Scrapped it clean with an X-Acto knife, put the phone back together and now it works like a charm. Saved myself a couple of $100.-
I really appreciatte the clear tutorial, I had in the past tried to open it up to get some dust out from under the screen, but couldn't figure out how to do it.