Posted by ludoo
You could always look what step was which shutter speed, f-stop will always be 2.8 
Hmmm yes, something like that but I would not mind making it easier on my eyes, instead of trying to decipher the microscopic gauge and derive the shutter speed from it (and ISO from another one like it). I know I can shoot a pic and check its info, but that too is slow...
Posted by mriley
We need a patch for that
Amir made one for the K800 mod, but nobody has made one yet for C901
Posted by ludoo
Found a free J2ME application that does just what I need
http://www.flickr.com/groups/1234880@N25/
Posted by ludoo
I did a quick cheatseet to tape to my c901 protective case
http://qix.it/site_media/cameras/raider%20cheatsheet.png
http://qix.it/site_media/cameras/raider%20cheatsheet.pdf
Posted by mriley
Does that application work? it looks cool
I also made one of those sheets but i put it in the icons folder in the phone so i can look at it in camera by pressing 0
What's the protective case for? c901 doesn't break when you drop it
Posted by ludoo
The protective case is to avoid scratching the screen with the keys, that are in the same pocket as the phone 99% of the time. It's a soft pouch more than a case.
The exposure meter app works, it could be better but it does its job.
Posted by wawawee
how to make iso as low as 50?
Posted by mriley
best way is to take photos in sunlight, then iso will automatically be 50
if no sunlight available then get a lamp and shine it strongly on subject
noise will be reduced and photo will look much better
Posted by jeczmen
Isn't there any lng file or graphic patch for that? Because I can't see which options I have selected. Thanks
Posted by TTT
Nope there isn't. The only similar thing is a patch for the K800i but no the C901...
Posted by sosweetgrace
Hi everyone!
I'd really want to install these drivers and i have followed the instructions but nothing happened.
I put the camdriver0.dat in my c901 with a2uploader but after I haven't seen any modifications.
Maybe I lost some things that i have to do...
Could you help me?
Thanks a lot!
(Ps. Sorry for mu bad english
)
Posted by Dima__
sosweetgrace, hi!
You must put camdriver0.dat file in /ifs/settings/camera/ that the camdriver will work.
It's all thing for putting the new driver
Posted by sosweetgrace
On 2011-01-11 13:22:33, Dima__ wrote:
sosweetgrace, hi!
You must put camdriver0.dat file in /ifs/settings/camera/ that the camdriver will work.
It's all thing for putting the new driver
Thanks a lot for the reply!
I've done and the process seem to go well but the camdriver doesn't work at all
I can't see any modification...
Maybe I've to try another time.
Posted by tranced
Can you show a print screen of the a2uploader in the camera location?
[ This Message was edited by: tranced on 2011-01-11 12:53 ]
Posted by sosweetgrace
On 2011-01-11 13:53:01, tranced wrote:
Can you show a print screen of the a2uploader in the camera location?
[ This Message was edited by: tranced on 2011-01-11 12:53 ]
Maybe I understood the mistake: I deleted the original driver!
Now I have tried to delete the raider's one and the camera doesn't work at all...
Posted by tranced
It doesn't matter as you don't need the original one anymore. You just need to upload the new camdriver0.dat to ifs/settings/camera and then click on the shutdown button.
Posted by sosweetgrace
On 2011-01-11 14:22:55, tranced wrote:
It doesn't matter as you don't need the original one anymore. You just need to upload the new camdriver0.dat to ifs/settings/camera and then click on the shutdown button.
Thanks a lot! I'm a little noob! LOL
So now I have the driver and the camera works.
But I don't understand how the driver itself works even if I have read the faq...
For example it seems to me that now I can't zoom very well with the +/- key.
[ This Message was edited by: sosweetgrace on 2011-01-11 13:33 ]
Posted by tranced
Maybe you weren't clicking on the shutdown button.
Posted by sosweetgrace
On 2011-01-11 14:48:07, tranced wrote:
Maybe you weren't clicking on the shutdown button.
I'm sure I've done...
Thanks a lot for your help!
Posted by Junz
For example it seems to me that now I can't zoom very well with the +/- key.
that means you have raider camdrive inside ur phone.
try to change ev position to +2.0 and press +/-, and let me know you can zoom.
Posted by loybu
hello everyone
ive installed the current driver, im having a problem when pressing -/+, sometimes it will show the phone status and sometimes after taken a shot, the camera reboot automatically..
anyone having this problem?
Posted by Junz
strange... never had that problem. which firmware do you have?
Posted by dragan985
Hi Everyone,
I have installed raider driver for the first time and I have some questions for You.
Is it possible to choose ISO 100 (with flash) and than manually adjust EV?
I tried to go to +1 and then select ISO 100 but when I go to +0.3 (to change EV) ISO automatically changes to ISO 200.
AnyOne Can Help me about this issue?
Posted by M1HON
prompt, and where the driver can be downloaded?
You can answer in icq, please, and then with Russia, and I do not know much english.
Thank you for your attention:)
Posted by Dima__
M1HON, privet
I am from Russia too, and I know Russian language)
you can downloaded from this link - http://www.4shared.com/dir/4926393/da7b074e/sharing.html
Posted by Junz
Dima__ do you know ironmaster from rusia?
can you help me?
Posted by pavithra_uk
can you add the more preset scene modes for unused EV positions ?
like iso1000 + Flash , iso1000+1sec ??
to get these values, we need to adjust Zoom bar maximum value two times. bit time consuming task.
Posted by Dima__
Junz, I don't known ironmaster..
How can I help you?
Posted by M1HON
Dima__, thanks:)
[ This Message was edited by: M1HON on 2011-02-10 13:16 ]
Posted by M1HON
from rusia?
Russia 
Posted by Mahmud
Junz, i'm from Ukraine, but I speak russian not bad, and I know IronMaster's. So what ?
Posted by Junz
can you help me to buy privacy patch? i dont have webmoney account, just paypal.
Posted by DevilMind
On 2010-07-01 15:00:11, TTT wrote:
Your phone must be brown to read the files in A2 Uploader.
Here's the original .ic file.
Link
i have IC File. i have even added 3 icons from Raider cam driver GFX folder to it with CodeClaw.
BUT what to do now??
How to add this IC file to my c901 ???
[ This Message was edited by: DevilMind on 2011-03-06 20:14 ]
Posted by mriley
Use A2 Uploader to put the .ic file on your C901
GFX: tpa/preset/system/icons
I made a thread to show everyone where things are in A2 Uploader so they know where to put modded stuff
http://www.esato.com/board/viewtopic.php?topic=193546
Posted by DevilMind
On 2011-03-06 20:15:48, mriley wrote:
Use A2 Uploader to put the .ic file on your C901
GFX: tpa/preset/system/icons
I made a thread to show everyone where things are in A2 Uploader so they know where to put modded stuff
http://www.esato.com/board/viewtopic.php?topic=193546
Thanks man.
But new icons are not appearing on my c901. All i see is same old icons.
I also installed Original .ic with Raider GFX downloaded from 4shared. I then checked with CodeClaw all new icons were in the file, but still in my cell c901 i only see old icons & no Camera 1/3 grid.
Posted by madis03
I have a problem with the lens cover. The switch that should signal the phone, that the cover is open, doesn't work. So any time I open the camera function I see the sign: "Open the lens cover", when it is already open. I was wondering if there is any way to bypass this notification and still take pictures.
Posted by D1ma
DevilMind, press 0 button, and you will see the grid.
Posted by TTT
On 2011-03-06 21:19:13, DevilMind wrote:
On 2011-03-06 20:15:48, mriley wrote:
Use A2 Uploader to put the .ic file on your C901
GFX: tpa/preset/system/icons
I made a thread to show everyone where things are in A2 Uploader so they know where to put modded stuff
http://www.esato.com/board/viewtopic.php?topic=193546
Thanks man.
But new icons are not appearing on my c901. All i see is same old icons.
I also installed Original .ic with Raider GFX downloaded from 4shared. I then checked with CodeClaw all new icons were in the file, but still in my cell c901 i only see old icons & no Camera 1/3 grid.
Did you put it in the right place in the phone and make sure it has the right name.
Posted by D1ma
"preview on/off = press the camera key half down and release" some body get work this function?
[ This Message was edited by: D1ma on 2011-03-18 14:25 ]
Posted by TTT
On 2011-03-18 13:52:08, D1ma wrote:
"preview on/off = press the camera key half down and release" some body get work this function?
[ This Message was edited by: D1ma on 2011-03-18 14:25 ]
Yes. Change the manual focus and just quickly press the shutter button.
Posted by D1ma
Thank you
Posted by D1ma
Hi friends in interest ...
I am sad by the fact that we will don't get any new versions of this GREAT driver(
Propose to gather some money for the author of this wonderful driver to new version continued to appear again!) I guess that 1-2 dollar each of us isn't big prise for such purpose... What do you think about this?
Post +1 and how much you are willing to pay under my massage, if you agree with this!)
When we gather some good money, we can write to the outhor. And may bу he will agree to continue his splendid work. And we all will be Happy)
Posted by major256
Well Dima, we should rather somehow convince (ie. pay
) Amir to write OSD for Raider's c901 camdriver. Just look here: http://www.esato.com/board/viewtopic.php?topic=170579&start=3994 , simply amazing! Personally I'd pay 15€ for this kind of functionality.
EDIT: my bad, looks like credits for OSD go to Raider, GFX is Amir's. Anyway I have installed camdriver + OSD + GFX on my old K800i that was laying on a shelf for 2 years - it turned out even more streamlined that I thought it would be. I'd KILL for something similar for C901
.[ This Message was edited by: major256 on 2011-04-01 21:50 ]
Posted by D1ma
I love it! Very great! So we have 30€. I think we can try write to Raider with this proposal...
And will be great if problems:
"Xenon power is controlled by EV position, not by real value of EV compensation
Some functions cannot be used with other functions"
will be fixed. Becose some time i have overburned picture...
Posted by piotrekk6
Which lines in lng should I edit according to last camdriver version?
Posted by LaMaster
I saw that Rider wasn't here?
Posted by LaMaster
I would like to show my admiration to him works
Okay guys! Who can help me?
I have problems when using the driver.
1. Briefly when the camera in macro mode, in the dark occurs in flash photography ISO100 1/125. Then, the screen darkens and the next pic is without a flash. The third pic with the flash again, etc. When i try to change camera settings (ss,ISO, red eye, ect) flash starts in a mode ISO200 1/10 or ISO400 1/8. Can anything be done? (without rebooting the camera).
2. When i make the manual mode ISO100 1/6400 (red-eye reduction mode) the first shot is ISO100 1/6400 (good) and next pic in the same mode (1/6400) or ISO400 (!) 1/8 (1/10). Who can fix these bugs?
maybe can i just such a bugs?
great tnx!
[ This Message was edited by: LaMaster on 2011-06-22 09:06 ]
Posted by LaMaster
Somebody ever was here?
Posted by thanhcong_to
@raider: can you show me where is code of "half-press to preview in manual focus". please! i need that for C905 .
[ This Message was edited by: thanhcong_to on 2011-08-06 09:41 ]
Posted by thanhcong_to
up up up ...................
