Welcome to Esato.com




Camera Manager Settings for models k850/c905


Click to view updated thread with images




Posted by brazzuka's
Camera Manager Settings™ for models k850/c905



We decided to contribute to this launch and avaliable for better performance of your camera and thus will use all resources available for these models.
But whats this?
Is not a revolution or a miracle.The logical device will be implemented enough for you to control all the functions that a semi pro camera has.
Manual settings is a different approach to manage camera parameters by included additional functionality layer and every logical programming which is not available in original driver.You decide when you turn on or turn off the manual settings for your cam.The manual settings for this models is worked to optimize the functions and not waste other necessary functions, this is the manual settings is optimized to work in any condition with flash *xenon flash or without flash, and all functions work together with their steps and settings.The keys to the steps are the same for reasons obvious, then we can use the controller EV to the steps.Camera Manager Settings™ The logical device is implemented enough for you to control all the functions that a semi pro camera has.
Manual settings is a different approach to manage camera parameters by included additional functionality layer
and every logical programming which is not available in original driver.You decide when you turn on or turn off the manual settings for your cam.Camera Manager Settings™ is an additional layer of functionality which is not available in original driver.This layer collects many manual functions which makes you able to control parameters yourself and not rely only on point & shoot automatic settings.You can use the Camera Manager Settings™ in automatic mode, the camera is still good POINT AND SHOT solution


Follow the same example of the manual settings camdrivers based in EV controll with a unique difference you decide whether or not the manual settings is on, no complications.
"do I have to set all parameters before shot?
it would be insane! absolutely NO! when you open the camera it is in fine tuned automatic mode which means that:
1. YOU DON'T HAVE TO USE functions, use them only if you want
2. camera is still good POINT AND SHOT solution
3. all parameters are automatic unless some of them won't be changed manually"

Note 1: This driver works on any compatible only mobile phone models k850/c905 with any version of cam module.
Note 2: This manual describes driver with default settings.
Note 3: You can change all settings in the cuztomize scenes section of the driver.
Note 4: This manual describes driver with default settings.
Note 5: You can change all settings in the Config section of the driver.
Note 6: Manual settings simple where the user can choose to enable or disable the manual settings.
Note 7: Camdriver optimized for implementation of manual settings.
Note 8: No patches or graphical interfaces only if the user want..

You can enter on leave manual settings in part menu manual settings/effects and on the manual settings you will have the option to turn on and turn off the manual settings (starting from EV 0.0).
If you want to use again the scenes mode, always unplug turn off the manual settings mode to access the scenes mode.
Leaving or turn off manual settings will reset all camera settings to the default state.
Colors Filter:You can also select the color filters without having to turn on manual settings.
Manual settings tables slightly depends on the current mode (photo/video).

About Camera Manager Settings™:
==========================
You can enter on leave Camera Manager Settings™ in part menu manual settings/effects and on the manual settings you will have the option to turn on and turn off the manual settings (starting from EV 0.0).
You turn on Camera Manager Settings™ in menu settings/effects and choose the black&white effects=Camera Manager Settings™ [on] and you turn off in menu settings/effects and choose the normal effects=Camera Manager Settings™ [off]
If you want to use again the scenes mode, always unplug turn off the manual settings mode to access the scenes mode.
Leaving or turn off manual settings will reset all camera settings to the default state.
Colors Filter:You can also select the color filters without having to turn on manual settings.
Manual settings tables slightly depends on the current mode (photo/video).


How to use this camdriver Camera Manager Settings™:
=========================================
It's very easy, it's actually original camdriver + some manual settings.
you can lock your favourite settings and take the pic, you can change: Shutter Speed, Shutter Speed Xenon Flash, ISO, Colors Saturation, Sharpness, Contrast, Brightness, Hue, *Colors Correction, Color Filters, Focus, Effects. also if you lock ISO you can change.
*Colors Correction = Color Filters

Organization and Layout for Camera Manager Settings:


List of all supported functions Camera Manager Settings™
------------------------------------------------
Scenes [off] Camera Manager Settings™ [on]
----------------+-------------------------------
Normal => ISO
Night => Colors Saturation
Night portrait => Sharpness
Landscape => Focus
Portrait => Shutter speed slow/fast
Beach&Snow => Contrast
Sports => Brightness
Document => Hue
----------------+-------------------------------
Camera Manager Settings™ [on]=> Works with Manual Settings normally and with all the functions available
Camera Manager Settings™ [off]=> Works with scenes normally with all the functions customize scenes for each scene available

-------------------------------------------------------------------
Effects Photo Mode Settings: Video Mode Settings:
------------+--------------------------------+----------------------
normal Camera Manager Settings™ [off] => EV
negative Color Filters1 => Color Filters1
solarize Effects => Effects
sepia Color Filters2 => Color Filters2
black&white Camera Manager Settings™ [on] => Focus
------------+--------------------------------+----------------------
Effects=> Here you can turn [on] or turn [off] Camera Manager Settings™
and you can use for settings in photo mode and video mode without need turn [on] Camera Manager Settings™






Camera Manager Settings for k850 v1.0:
Download
Camera Manager Settings for k850 v1.0

Camera Manager Settings for k850 v2.0:
#changelog:
-Area Customize Scenes:Now you can customize each scene as your taste, each scene is pre configured with all of the functions available for you to modify and adjust as desired.
-Video Mode:Autofocus when EV 0.0 every time you start the camera in video mode autofocus in EV 0.0 enable and manual focus in video mode with camera manager settings [on] enable or camera manager settings [off] disable.
You can use the manual focus without turning on the camera manager settings, only going into video mode and select manual focus in menu effects black&white.
-Scenes Mode:Twilight Scene or Night (Twilight Landscape) Scene FIXED-Shooting in 2 seconds shutter speed 2s with joypad you can change EV.

Download
Camera Manager Settings for k850 v2.0

Camera Manager Settings for c905 v3.0:
Download

Camera Manager Settings for c905 v3.0
LNG GUI Camera Manager Settings for c905 v3.0
LNG GUI Camera Manager Settings for c905
[ This Message was edited by: brazzuka's on 2010-06-09 15:36 ]



Posted by volume100
It would be cool if there was a driver with full manual options for C901. Like ISO settings, forced flash and shutter speed. I think that would give much better pics and a lot more freedom when taking pictures.

I like the koncept

Posted by tarete
Nice idea mate

Posted by brazzuka's
Process/Step 1 => clear ok
Well first let's work on top of the driver with forced xenon flash.
We have [3] three functions optimized for that.

for/Xenon Flash on

every functions clear ok
About this functions with xenon flash:
All these functions only work with the flash on obviously a matter of common sense.
[ This Message was edited by: brazzuka's on 2009-10-12 12:31 ]


Posted by brazzuka's
Process/Step2=> clear ok

Filter Colors independent
We can use color filter with the manual settings turned off, only accessing the menu manual settings and works to both; photo and video. [clear ok]

Photo => manual settings
- exposure [ok]
- manual iso [ok]
- *manual iso xenon flash [ok]
- manual shutter speed slow/fast [ok]
- manual shutter speed xenon flash slow/fast [ok]
- colors saturation [ok]
- contrast [ok]
- *colors correction WB [ok]
- brightness [ok]
- manual focus [ok]

Video => manual settings
- effects [ok]
- filter colors1 [ok]
- filter colors2 [ok]
- empty
- empty

*manual iso xenon flash works together with manual shutter speed xenon flash
*colors correction WB ( 2 process independent of colors correction).


any idea or suggestion?
[ This Message was edited by: brazzuka's on 2009-10-12 12:32 ]


Posted by volume100
This sounds great and could be the thing for C901 camera. No need for image improvement, just more camera-alike options

Posted by brazzuka's

@volume100
This sounds great and could be the thing for C901 camera. No need for image improvement, just more camera-alike options

The model C901 works with another sensor but you can ask information about this on the topic of the C901.
You're right about that because the concept is the same for c901.You must first find the basic functions and so begin for a future manual settings for these models c901.Try to talk to the modders that are working with the models C901.


Posted by code28h4p
There's no modder for c901 yet...just waiting for someone could do miracle

Posted by brazzuka's
News manual settings works c905
Manual settings works for the c905 but for this model we will propose a partnership with the DarKMaGiCiaN and Theliel. Why propose to DarKMaGician and Theliel? think the two have sufficient knowledge isn´t, well if any modder has knowledge and interest on the subject may also declare here.Yes guys so you have more work to "make believe" .Both would be authorized to adjust the manual settings or some adjust colors correction for this model c905 for their efforts and constant pursuit of learning.
What do you think guys? Are you ready for work with c905.

Posted by jake20
this is great news.. thanks brazzuka's!

I am glad to see not everyone is abandoning the c905 yet! The camera on this phone is too good to not be supported.


Posted by brazzuka's
here will go
sample pics test manual settings
k850




c905




in principle it seems that all functions are working properly and manual settings scheme based on camdrivers flash forced for reasons of optimization.Maybe we can work with manual settings in scenes or not I don´t know if it's a good idea.
[ This Message was edited by: brazzuka's on 2010-05-10 17:26 ]


Posted by brazzuka's
some tests with manual settings
manual settings iso xenon flash




mirror
Image and video hosting by TinyPic
Image and video hosting by TinyPic
Image and video hosting by TinyPic


*manual settings turn on [ enable]
*xenon flash on
manual iso xenon flash works together with the others functions when manual settings turn on
manual shutter speed xenon flash works together with the others functions when manual settings turn on

manual settings turn off [disable]
*xenon flash on
manual shutter speed xenon flash works in EV
*xenon flash off
EV (3 properties=EV+shutter speed+ISO) default by sensor


Posted by brazzuka's
Process/Step3=> clear ok

Video:

Video => manual settings
- effects [ok]
- filter colors1 [ok]
- filter colors2 [ok]
- manual focus [ok]
- EV [ok]
[ This Message was edited by: brazzuka's on 2010-05-10 17:21 ]


Posted by brazzuka's
pre launch May 18th, 2010 camera manager settings for this models k850/c905
menu effects now with new techniques effects more than 5 effects implemented in video mode and photo mode
manual settings works with all functions together for both models k850/c905.
[ This Message was edited by: brazzuka's on 2010-05-10 17:24 ]


Posted by jake20
this looks very nice brazzuka's! thanks for your efforts!!
will this driver have a correctly working manual shutter speed for non flash shots?

Posted by ceaser2008
Wow, brazuka, finally we are going to test your outstanding work. Cant wait till 18.

Thank you.

Posted by bobbywomack

[ This Message was edited by: bobbywomack on 2010-05-23 18:26 ]


Posted by anouk82
hi brazuka it is 18th,were waiting....

Posted by anouk82
a sign please...

Posted by ceaser2008
Any news of prelaunch of this driver ?? We are eager for it.

Posted by anouk82
brazzuka....we're waiting

Posted by brazzuka's
hi guys
Sorry the delay in responding but we were busy with work, yes some of team work incredible isn´t
Most of the guys are more focused more on the Android OS and applications apps therefore don´t have much free time.
We did some tests with the c905 model and had to correct some registers that were conflicting with the model.Now the model c905 is working correctly also but anyway, we thought better to release only the K850 model since both models are compatible with the manager camera.Expect to release tomorrow with some info guys.
A bad news:probably no more updates camera manager because it was developed long ago and decided to release to you guys and hope you will enjoy.
Both models support movie size CIF but VGA only model w995 with some restrictions.



Posted by ceaser2008
Hey we are waiting for this drive. Why so much of delay?

Posted by bobbywomack
This driver is hardass.I've tried to open wbxml file ,but...
Wtf is ($ 110ff15e) :-S.Omg ...there must be some program to edit these files..I'll keep tryin'...Wish me luck !

Posted by brazzuka's
Available Camera Manager Settings for k850 #1post: more info and details write in the next days guys enjoy.


Posted by bobbywomack
brazzuka's what about c905 ,did you abandoned this model?



Posted by bobbywomack
The new camera manager will be like shootfish or much different? I've replaced the old driver,with shootfish and now my xenon flash does not work,but maybe if I change with the original everything will get back to normal. I hope the new camera manager will have option to turn of manual settings.

Posted by ceaser2008
This camdrive is good in order to access the manual settings.


Posted by bobbywomack
After preinstaling my xenon works perfectly,it looks like I did something wrong when instiling this 'shootfish v9'.

Posted by brazzuka's

@ ceaser2008
This camdrive is good in order to access the manual settings.


Yes but not only to access but for all from what I know is the most complete key using EV.I think that only now the modders are using the function correctly shutter speed slow/fast and the others functions after one years written in this forum.Maybe the driver is too advanced for the current concept and for us is the end of line, no more updates for those models k850/c905 all the functions useful and usable are available.
Enjoy guys


Posted by Navar
Pic moved to my topic
[ This Message was edited by: Navar on 2010-06-02 05:04 ]


Posted by stxyh
Great work, friend. You hard to pay for K850I once again gained a new life. Thank you!

Posted by quovadis


Very nice driver but I get very often the "Another application is running. Close it, and then start the camera." error :/ Apart from that I like everything about it Thanks brazzuka.

Posted by brazzuka's
AvailableCamera Manager Settings for k850 v2.0 and Camera Manager Settings for c905 v3.0
changelog k850 v2.0 in guide user readme
#1post


Posted by jake20
@brazzuka's
thanks! but the en.lng is not in english when i load it on my phone
Can you fix this?
[ This Message was edited by: jake20 on 2010-06-05 21:12 ]


Posted by brazzuka's
here jake

Instructions for change LNG Interface

IFS \\ SETTINGS \\ CAMERA

Delete the file "camdriver0.dat" and "camdriver1.dat" and drag and drop the file Unpack with the same names (CAN NOT BE DIFFERENT NAME).

camdriver0.dat=> for camera
camdriver1.dat=> for frontal camera or video call

Files *. lng (language)
Should be placed in this folder:

TPA \\ PRESET \\ SYSTEM \\ LANGUAGE

Drag and drop the files "pb.lng" and "en.lng" "de.lng" "sv.lng" folder above.

How to change *.lng:

- Download LngEditor
- you will need .NET FrameWork 2.0 to run it. you can download it from Microsoft website.
- Download your current FS from 4shared
- Follow this guide to extract FS.
- Find *.lng file you want to edit in TPA\\PRESET\\SYSTEM\\LANGUAGE
- Open the file with LngEditor and edit it, then save it.

example:

based R1FA035_LNG
*the LNG GUI is not need, is not required only if you want




Posted by jake20
brazzuka
I am very sorry, but I am not understanding your directions. why so complicated to get an English language file for your camera driver?

Every other modded cam driver here I don't have this problem.
For DM & Witchking cam drivers, the en.lng they provide is in English on my phone. no problems
Why does your en.lng file change the language on my phone to Spanish?

I opened it up in the language editor, but I have no idea how to make it English.
Am i the only one having this issue?

thank you again for your time and effort!
[ This Message was edited by: jake20 on 2010-06-05 22:05 ]


Posted by anouk82







Posted by anouk82
check your inbox Brazzuka,thanks...

Posted by righotto
Hi!
i like the camdriver c905 is very good settings and pictures are sharper with beautiful colors. The effects seem cool!

Posted by amnher
What happened to this project?

Posted by bhooooooookk
i have experience bug in these driver, when im using the flash in night, the result is darker..
What should i do? What settings im going to choose in night shots.

Posted by amnher
Is multiple setting allowed? meaning I set ISO then I set shutter speed. I mean multiple manual setting at the same time


Click to view updated thread with images


© Esato.com - From the Esato mobile phone discussion forum