Posted by mikely_28
I'm using Eltoffer's. What about it?
Posted by eltoffer
as i said i was waiting for the new FW to see the main cadriver diferences now that i got the ".8 driver i could make my changes based on the new driver so please be paitient i will also see the DM driver i need one guy to test my driver but i need it to be onb NEW firmware
please send me a PM and be patient
EDIT
fixed XD soyy but some times i forget this is an ENGLISH forum in spanish is MP
[ This Message was edited by: eltoffer on 2009-05-22 21:45 ]
Posted by superleeds27
An MP.
You can ahve Gordon Brown!
Usless scottish arse!
Or did you mean a PM? lol
Posted by DarKMaGiCiaN
@superleeds27
I have no idea !!
I test it twice after your post and it work fine
@mikely_28
both work fine with the new FW as there is no major difference between SE old and new camdrivers
@superleeds27
NO my new driver is based on my old camdriver 1.57 ^_^
@eltoffer
I already post the New FW camdriver ^_^
Posted by superleeds27
Strange int it!"
I was using auto and the colour correction!
Still looked decnt image didn't it, just not sure why it was iso200!
Ill try again later
Posted by eltoffer
Hi DM i checked your driver, interesting instructions
could you please explainme how does it works where did you find this regs????
#SET_REG(65,FC) // 7f blue 00 - 7F = cyan, 80 - FF = red
#SET_REG(66,FE) // 7f green 00 - 7F = yellow, 80 - FF = magenta
#COM_EVENT(13,01);
i was looking for something like this to improve RED color on ALL my
give me a hand
EDIT
DM do you know how to use negative values?????
[ This Message was edited by: eltoffer on 2009-05-22 22:24 ]
Posted by mikely_28
Yes! Both works perfectly! Just Gr8!
Posted by DarKMaGiCiaN
@eltoffer
I got it from brazzuka's
see this : http://www.esato.com/board/vi[....]c=169423&start=105#post2505179
DM do you know how to use negative values?????
mmm what do you mean by that ^_^
Posted by eltoffer
thanks man, i mean to set expossure on -1.3 or -.7 something like that
Posted by vegetaleb
Dos the last DM Camdriver lower the jpeg compression compared to original c905 driver??
Video recording has been hacked up to 640*320 or not yet?
Posted by eeeyaaan
is it just me or does DM's latest driver.. 2.0 produce a little worse video this time compared to the original driver and the past modded ones?
Posted by superleeds27
I wouldn't have thought so.
You using 2.6?
Posted by diablilla1980
DarKMaGiCiaN 2.6
Posted by Raffles88
hope DM will make a new 2.6 based on se 2.8
Posted by superleeds27
2.8 is crap.
Nothings really changed, infact ive seen alot of users complaining about contrast issues during the day with the newer driver.
Modded drivers are the way forward, and eltoffer and DM are doing a great job.
It'l be intresting to see what Eltoffer comes up with next, hes now seen what the 2.8 has to offer, and is currently working away with it... I think (Y) lol
Posted by Bryan84
Eltoffer, next time do create two versions for us:
- Manual ISO
- Auto ISO
=D Cause I am one who prefers auto and loving your 3.0 Auto!
Posted by N0ah
5.Low color when using night portrait either in flash or without flash ( means if you are not happy with the high color of the indoor shots, use night portait scence )
DM what do you mean by this?
Night Portrait in ur driver is for Night Portraits? But you can also use it for Low Colour in indoor shots instead of High Colour? What if Night Portrait + CC?
Thanks!~
Btw what are the different ISO values in Effects?
[ This Message was edited by: N0ah on 2009-05-23 17:12 ]
Posted by mikely_28
I'm using manual ISO. Both drivers are very good, let see what else DM and Eltoffer will do with new camdriver on their way to perfection. I think they already made a good work with a camdriver.
Posted by DarKMaGiCiaN
@eltoffer
to set the expossure to -0.7
change the 09 to 0B in
seq_set_prop_0 = #TO_DRAFT $s5 %0 $ma 5 $-5 09 #COM_EVENT(06,$w5);
@vegetaleb
yes it does have lower jpeg compression ^_^
actually I seldom record video that why I didnt touch video codes untill now ^_^
@eeeyaaan
but I didnt touch anything related to the video!!!
@diablilla1980
nich shots ^_^
@Raffles88
there is no major changes between old and the latest SE camdriver so no need to recode my driver based on the new driver ^_^
@N0ah
Night Portrait in ur driver is for Night Portraits and you still can use CC with it
the only difference between the Night Portaits and other scenes is Night Portraits has lower color ( still has vivd color than the original driver ) I put it there because some skin with this hight color become yellowesh
@mikely_28
thanks ^_^
[ This Message was edited by: DarKMaGiCiaN on 2009-05-23 18:53 ]
Posted by zizo90
guys can i use color correction in auto shot? or i can use it only in night shots?
Posted by daviep
DM says to use daylight white balance option in his driver to get colour correction
Posted by DarKMaGiCiaN
guys can i use color correction in auto shot? or i can use it only in night shots?
in my camdriver you can use color correction any time just choose Day light in WB
Posted by zizo90
On 2009-05-23 20:52:02, DarKMaGiCiaN wrote:
guys can i use color correction in auto shot? or i can use it only in night shots?
in my camdriver you can use color correction any time just choose Day light in WB
thanks alot DM,, really great driver,, if you can upgrade the video recording too it will be even better.
Posted by zizo90
sorry for being such a burden,, i have another question,, what is the best ISO setting to use in normal shots not night shots? off = auto ? thanks guys..
Posted by DarKMaGiCiaN
@zizo90
I recommend Auto
mostly I use the manual ISO when I want to take a shot of dark subject in day shots ( set iso to 100 )
in some cases I use ISO160 and ISO200
Posted by zizo90
On 2009-05-23 21:49:51, DarKMaGiCiaN wrote:
@zizo90
I recommend Auto
mostly I use the manual ISO when I want to take a shot of dark subject in day shots ( set iso to 100 )
in some cases I use ISO160 and ISO200
thank you very much DM..
Posted by omokas
The Latest firmware for me is R1DA032 , can I use the latest (2.6 i think) driver on this firmware ? (from Dark_MaGiCiaN
Thanks,
omokas
Posted by omokas
OMG , I just checked the "Software info" on the "secret" menu and it says "No CDA" , I fixed the problem with A2 CDA Generator...Now I am updating to the new firmware
Posted by Raffles88
i like the fast detection rate of faces and smile in the new 2.8. DM rules the rest.
Posted by x.man
i made some shots with new camdriver from NFW and i thing it is not MY driver
Posted by DarKMaGiCiaN
mmmmm missing lots of people here like zootzoot, mauasca, eeeyaaan ,....,.......
@zizo90
welcome ^_^
@omokas
nice FW isnt it
@Raffles88
thanks because of your comment I found a small error in my driver I'll correct it ^_^
@x.man
as I said no big improvment in the new FW camdriver ^_^
[ This Message was edited by: DarKMaGiCiaN on 2009-05-24 20:30 ]
Posted by omokas
@DarKMaGiCiaN
Yep , I can see improvment on Wi-Fi , Sound Driver , No-More "Freezing" , The "SonyEricsson" logo loads faster , Camera is better (I am using your new camdriver but i think it still has a problem , too much grey or STH like that) , faster BlueTooth , AND NOW THE SMILE SHUTTER WORKS (i am very happy) !!!!!!!!
Nevermind can you fix the "camera" problem ? BTW can I have your msn (or another client) just to keep in touch ?
Posted by eltoffer
could anyone post one pic showing the CC?? i mean i wanna see one pic with CC and other (the same place in the other pic) without it, my pc doesnt recognize my c905 :S so i cant upload the driver
Posted by nexusbrz
Hi,
could you please tell me what should I change in the original driver to reduce image noise caused by JPG compression? I mean, original driver saves pictures at +-1.5MB, but I would like to reduce the noise and compression, so I can get better images, at the expense of image size (from 1.5MB to 2.8MB, lets say)
thanks a lot.
Posted by vegetaleb
Choose Fine instead of Normal in the camera settings then you will get +3mb per photo,but yes we should get about 4 to 5mb per photo for a low compressed jpeg in 8mp mode...
Posted by Raffles88
Hi DM, pls reload the corrected file. tks
Posted by Luhccas-U1a
On 2009-05-25 07:15:28, eltoffer wrote:
could anyone post one pic showing the CC?? i mean i wanna see one pic with CC and other (the same place in the other pic) without it, my pc doesnt recognize my c905 :S so i cant upload the driver
I've tried CC but i don't seen a BIG difference...
Posted by Kurohige
HI guys i'm new xD , well first say Thanks guys this forum is great!!
i few minutes ago a take some pics with the eltoffer v3.0 camdrive, all settings in auto
i hope soon test the last darkmagician driver
images from my City , Coquimbo , Chile
I continue with the "problem" when taking photos of people in darkplaces, are very yellow XD, great job !! guys
[ This Message was edited by: Kurohige on 2009-05-25 20:50 ]
Posted by DarKMaGiCiaN
@omokas
do you mean when using Flash ?
I got this problem since R1DA FW
because of that I downgraded my phone to R1BA which does not have this issue
now i'm on the latest FW R1EA and the issue back
is this issue just in my Driver !!
I test the Original Driver has it also in the latest FW and this problem still appear SP when ISO set to 200
and I dont know where is the porblem is to solve it
MSN I dont remember the last time I open it
@eltoffer
tomorrow I'll do a one for you ^_^
@Raffles88
I'm working on someting else now when i finish I'll release upload the driver ^_^
@luhccas-c905
as I said before C905 already gives us a great shots so no way we can creat a camdriver which is way better that the Original one
@Kurohige
nice place from nice phone and driver ^_^
welcome to the fourm
but which FW do you have R1DA or R1EA
As I see bluish color in the middle of the Pics ^_^
Edit:
I continue with the "problem" when taking photos of people in darkplaces, are very yellow XD, great job !! guys
did you try my lates driver !! ( using night portrait )?[ This Message was edited by: DarKMaGiCiaN on 2009-05-25 21:08 ]
Posted by zizo90
hi DM,, WILL YOU UPGRADE THE VIDEO RECORDING IN YOUR NEXT DRIVER?
Posted by omokas
@DarKMaGiCiaN
Do you like the new firmware (R1EE) or the old (R1BA or R1DA) ones ?
I prefer the new one because everything (except camera) is better.
I my C905
Posted by omokas
Sorry for double posting guys...
@DarKMaGiCiaN
Yep , with flash but sometimes the problem shows up without flash
Posted by Kurohige
On 2009-05-25 22:02:03, DarKMaGiCiaN wrote:
@Kurohige
nice place from nice phone and driver ^_^
welcome to the fourm
but which FW do you have R1DA or R1EA
As I see bluish color in the middle of the Pics ^_^
Edit:
I continue with the "problem" when taking photos of people in darkplaces, are very yellow XD, great job !! guys
did you try my lates driver !! ( using night portrait )?
HI DarKMaGiCiaN , Thanks a lot , i have R1DA032 firm
not yet , now i test your driver and upload pics
Posted by fedex289
Hello, darkmagician, i'm currently using your dm ver.2.6 camdriver..
Just want to ask you, had u changed/edited anything in the 'document' scene?
I noticed a lower picture and color quality on ur driver compare to the original c905 camdrive 2.7 i used before..
I occasionally using the 'document' scene to take pics of thesis..
Posted by Luhccas-U1a
On 2009-05-25 22:02:03, DarKMaGiCiaN wrote:
@luhccas-c905
as I said before C905 already gives us a great shots so no way we can creat a camdriver which is way better that the Original one
Agree,but your efforts,Eltofer,testers etc; Will improve a lot
I've found something,when you set CC into property 14,flash off specifically,the "correction" works...
But with flash on,the color adjusts automaticaly.
Even placing weird values,with flash on don't "work" properly...
Posted by eeeyaaan
HEY DM can you post a version of your 2.6 without the manual ISO settings please? thanks
Posted by eltoffer
Here you have a new shot comparing my beta driver with DM's 2.6, mine is not ready yet but....
Eltoffer betadriver
http://img37.imageshack.us/img37/5222/dsc09860a.jpg
DM 2.6
http://img529.imageshack.us/img529/9674/dsc09861.jpg
DM 2.6 CC
http://img15.imageshack.us/img15/1899/dsc09862j.jpg
comment
[ This Message was edited by: eltoffer on 2009-05-26 06:27 ]
Posted by Luhccas-U1a
Wich value for CC?
Posted by x.man
Hi DM, how can i set CC in your 2.6 driver?
Posted by vegetaleb
DM 2.6
Very nice overall color/saturation/brightness
but it still need less jpeg compression because if you look to the foliages details are washed out,keep the good work DM