Welcome to Esato.com


Pages:
Previous  123 ... 5556 575859  Next


C905 CamDriver Modded


Click to view updated thread with images




Posted by SonofLiberty
Witchking's is the best. I really liked dm 3.8 but IMHO witchkings is better.


Posted by jason_mendez
ok...thx....n' even after i install witchkings or DarkM.'s driver......will the face detection and everything work fine as it was before with the default se driver??N please can anyone post the difference between the two drivers? or full detail of which one has which future's n' stuff.....?

Found the witchkings details but please post for dm's one if anyone can....

::



Why choose Cybershot Xperience?
So many additional features without losing any of the original ones!

*Amazingly vivid colours and quality
*ISO Control
for both flash and non-flash shots
*Advanced Auto-ISO Flash mode
*Shutter-speed control
for both Flash and non-flash shots
*Manual Focus
*Manual Contrast
*Manual Saturation
*Auto-exposure lock on/off
*Advanced Hue/Tint selection
*Manual Colour balance: Cyan, Red, Yellow, Purple
*Forced flash on/off
*Colour Correction On/off

*Focus and other features in video mode
Record videos in QVGA (320×240) and WQVGA (400 x 240) with the same driver
And more..!

———————

USER GUIDE

Using Cybershot Xperience Advanced is not at all difficult, as it might seem.

It is very user-friendly and convenient in usage.

Moreover, when you upload the language file provided with the driver into the required directory, you’ll get a new interface with HELP and Info available for each Setting in the driver, and you won’t even need to memorize or keep in mind the locations of different manual settings in the driver.

Using Manual settings will help you in getting great shots. Professional and advanced photographers will most certainly benefit to it.

However, if the user does not wish to bring them into use, just keep in mind that Cybershot Xperience is still an excellent point-and-shoot camdriver.

Keep all settings at Auto and shoot away.


USING IN AUTO-SCENE:

___________________

Outdoors:

Use in Auto-mode, turn Flash and Colour Correction to AUTO to Turn Colour Correction on.

If you prefer less vivid colours, you may turn colour correction off by turning flash off.

Indoors:

Turn Flash off or on as you desire and simply capture a pic.

————————————————————-
Complete list of Manual Settings:
_________________________________

*Default EV Control has been changed to ISO control (for flash shots) and Shutter Speed Control (for non-flash shots) so you can now simply raise Flash Exposure and ISO by raising EV in normal mode. This makes it a very easy and quick way for using flash ISO of your choice. Shutter-speed for non-flash shots can be changed in a similar way.

*Flash Shutter-speed control

Select RER flash and balance Shutter-speed by EV buttons

*Record videos in two different resolutions!

To record in QVGA(320 x 240) , just switch to video mode without Night Mode and record.
To record in WQVGA(400 x 240), turn Night Mode on by pressing the scenes button.

In Effects menu, the Manual Settings implemented are:

*Manual Focus (Previously Black and White)
*Manual Contrast (Previously Negative)
*Manual Saturation (Previously Sepia)
*Selection of ISO (Previously Solarize)

In White Balance menu, the Manual Settings implemented are:

*Colour Filters and Auto-exposure lock (Previously Daylight)
*Manual Colour Balance between Cyan and Red (Previously Cloudy)
*Manual Colour Balance Between Yellow and Purple (Previously Fluorescent)
*Selection of Effects, White Balance (Previously Incandescent)

In Scenes menu, the Manual Settings implemented are:

* Manual Shutter-speed for both for Flash and non-flash (Previously Twilight Portrait)
* Two Shutter-speed value modes.
Fast Shutter (At Sports Mode)
Slow Shutter (At Beach and Snow Mode)

————————————————————-
Using Manual Settings:
______________________

First of all, upload en.lng (or the edited language file you use with your phone) to tpa/preset/system/language

This will:

*Change Text in Camera Interface according to driver.
*Add brief Tutorial/Help in camera interface for each Manual Setting used in the driver.
________________

To use Forced Flash:
Switch to RER mode and Forced Flash will be activated. i.e. Flash will fire regardless of lighting conditions.

USE:
This can be useful in photographing objects against a bright background. Normally that would cause the object to appear dark or underexposed, but forced flash may prevent it.
Posted Image

________________

To use ISO (Light Sensitivity) Control:

For Flash Shots:
In auto-mode, simply raise or lower EV to control ISO. So it is very easy to control flash exposure with this driver!

-2.0 = ISO 100
-1.7 = ISO 100
-1.3 = ISO 100
-1.0 = ISO 125
-0.7 = ISO 160
-0.3 = ISO 200
0.0 = AUTO
+0.3 = ISO 250
+0.7 = ISO 320
+1.0 = ISO 400
+1.3 = ISO 500
+1.7 = ISO 640
+2.0 = ISO 800

USE OF ISO in Flash:

Raising ISO for flash will increase exposure when you need to get brighter flash photos.
Use low ISO for macro shots and moderate for distant shots.

Posted Image

For Non-Flash and Flash shots together:

Switch to ISO in Manual Settings 1 Tab

-2.0 = ISO 100
-1.7 = ISO 100
-1.3 = ISO 125
-1.0 = ISO 160
-0.7 = ISO 200
-0.3 = ISO 250
0.0 = AUTO
+0.3 = ISO 320
+0.7 = ISO 400
+1.0 = ISO 500
+1.3 = ISO 640
+1.7 = ISO 800
+2.0 = ISO 1000

USE OF ISO for non-flash shots:

ISO can help you in obtaining correct exposure.
LOW ISO outdoors will give you more saturated and vivid colours. Image will be sharper as well, but in low light environments, a lower ISO would cause the image to become VERY underexposed.
HIGH ISO outdoors should be used for portrait photography; it will give you softer facial tone and sharpness.
________________

To use Shutter-speed control:

In photography, shutter speed is a common term used to discuss exposure time, the effective length of time a shutter is open; the total exposure is proportional to this exposure time, or duration of light reaching the film or image sensor.

For non-flash shots:
Shutter-speed control has been shifted to Twilight Portrait Scene. Use EV to customize it.

Two extra Shutter-speed modes are also available.

Fast Shutter (At Sports Mode)
Sample shot: Picture captured of a car at 110 km/h:
New window
Click to expand / contract


Slow Shutter (At Beach and Snow Mode)
Sample shot: Night view
Click to expand / contract

Slower Shutter = Longer exposure time = More exposure

For Flash shots:

Select RER flash and balance Shutterspeed by EV buttons.
EV = -2.0 (Fastest Shutter)
EV = +2.0 (Slowest Shutter)

Increasing slow shutter for flash will be VERY effective in getting more exposure in flash shots, a better way than raising ISO, but ONLY when a light source other than the cameras Xenon flash is present.

e.g. in the following shot, a light bulb was lit when the flash shots were taken.

Posted Image

________________

To use Manual Focus:

Go to the last tab in camera menu labelled Manual Settings (1).

Select Focus.

Use D-pad to change EV value. EV value will change lens position rather than exposure, so you can focus manually

Hint: Zooming in a little while focusing will help in better location of exact focus point. You can zoom out again when you’ve focused.

-2.0 = 0 Focus steps (Infinite)
-1.7 = 4
-1.3 = 8
-1.0 = 12
-0.7 = 16
-0.3 = 18
0.0 = 20
+0.3 = 22
+0.7 = 24
+1.0 = 26
+1.3 = 28
+1.7 = 30
+2.0 = 32 (Closest focus step)

USE OF MANUAL FOCUS:

You may wonder why you should ever bother using manual focus if your digital camera has auto focus. Isn’t auto focus much easier to use and always provides the right focal distance for your photos?

Unfortunately, auto focus is not perfect. Difficult lighting situations, subjects that are very close or very far away, bright or shiny objects and conflicting focal points may result in your digital camera autofocusing incorrectly or unable to do so at all. You may need to compensate for this by using your manual focus ring.

Also, you may want to intentionally blur a photograph for artistic effect. In this case you will need to slightly defocus your photograph manually.

________________

To use Manual Contrast:

Go to the last tab in camera menu labelled Manual Settings (1).
Select Contrast
Change EV with D-pad to change contrast and to level your pictures manually.
EV = -2.0 (Black Contrast)
EV = +2.0 (White Contrast)

USE: Sometimes you require slightly more or less white in your snapshots, particularly indoors. This is where you may need Manual Contrast.
________________

To use Manual Saturation:

Go to the last tab in camera menu labelled Manual Settings (1).
Select saturation
Change EV to change Saturation.
EV = -2.0 (Minimum Saturation or Black and White pictures)
EV = + 2.0 (Maximum or insane Saturation)

USE:

Manual Saturation helps in getting better and more colourful photographs of landscapes. Sometimes you may need to lower saturation too (e.g. when photographing intensely brightly coloured objects which appear without details on camera, or when taking portrait shots)

________________

To use Effects:
Go to Manual Settings (2).
Select WB and Effects

Effects:
0.0 = None
-0.3 = False Colours
-0.7 = Negative
-1.0 = Black and White
-1.3 = Sepia
-1.7 = Solarize

USE:
False colours changes the colour tone of many shades.

Negative effect reverses the colours.

Solarize effect works best with backlit images, where the foreground image is too dark to be clear. Solarizing lightens up the darker parts of the image without giving them a washed out-look, and it takes the lighter elements and makes them into a color negative.

Sepia and Black and White effects give the photos an old fashioned look.

________________

To use Manual Colour balance:

Go to the second-last tab in camera menu labelled Manual Settings (2).

Balance Cyan-Red or Yellow-Purple as you desire.

Configure with EV as below.

EV = -2.0 (No extra colour)
EV = -1.7 to 0.0 (First Colour intensity. Max at 0.0)
EV = 0.3 to + 2.0 (Second colour intensity. Max at 0.3)

You may Mix colours between the Colour Balance settings.

USE:

Manual Colour balance can help you in obtaining camera effects which are not possible with ordinary camera colours.

e.g. to shoot in a scary night film-like view during daylight, set colour to blue and reduce exposure to give a dark blue mystic shade.
Posted Image

________________

To use Manual White Balance:

Go to Manual Settings (2).

Select WB and Effects:

WB:
0.0 = Auto
0.3 = Daylight outdoor
0.7 = Cloudy outdoor
1.0 = Fluorescent
1.3 = Incandescent

USE

At its simplest – the reason we adjust white balance is to get the colors in your images as accurate as possible.

You might have noticed when examining shots after taking them that at times images can come out with an orange, blue, yellow etc look to them – despite the fact that to the naked eye the scene looked quite normal. The reason for this is that images different sources of light have a different ‘color’ (or temperature) to them. Fluorescent lighting adds a bluish cast to photos whereas tungsten (incandescent/bulbs) lights add a yellowish tinge to photos.

The range in different temperatures ranges from the very cool light of blue sky through to the very warm light of a candle.

We don’t generally notice this difference in temperature because our eyes adjust automatically for it. So unless the temperature of the light is very extreme a white sheet of paper will generally look white to us. However a digital camera doesn’t have the smarts to make these adjustments automatically and sometimes will need us to tell it how to treat different light.

So for cooler (blue or green) light you’ll tell the camera to warm things up and in warm light you’ll tell it to cool down.


Adjusting White Balance
Different digital cameras have different ways of adjusting white balance so ultimately you’ll need to get out your camera’s manual out to work out the specifics of how to make changes. Having said this – many digital cameras have automatic and semi-automatic modes to help you make the adjustments.


Preset White Balance Settings
Here are some of the basic White Balance settings you’ll find on cameras:

* Auto – this is where the camera makes a best guess on a shot by shot basis. You’ll find it works in many situations but it’s worth venturing out of it for trickier lighting.
* Incandescent – this mode is usually symbolized with a little bulb and is for shooting indoors, especially under tungsten (incandescent) lighting (such as bulb lighting). It generally cools down the colors in photos.
* Fluorescent – this compensates for the ‘cool’ light of fluorescent light and will warm up your shots.
* Daylight/Sunny – not all cameras have this setting because it sets things as fairly ‘normal’ white balance settings.
* Cloudy – this setting generally warms things up a touch more than ‘daylight’ mode.
* Flash White Balance (ADAPTED IN CX for flash shots at different ISO’s) – the flash of a camera can be quite a cool light so in Flash WB mode you’ll find it warms up your shots a touch.

________________

To use Colour Filters/ Tints:

Go to the tab in camera menu labelled Manual Settings (2).
Select Colour Filters/Tints.
This is not an original property of the driver but is a manipulation of colour correction codes to produce a variety of light shades/tints to enhance a specific colour you want to be exposed most prominently.

-2.0 = Purple
-1.7 = Blue
-1.3 = Cyan
-1.0 = Green
-0.7 = Green variant

-0.3, 0.0 and 0.3 reserved for AE LOCK.

0.7 = Yellow
1.0 = Orange
1.3 = Red
1.7 = Deep Red
2.0 = No tint


USE:
This can be used to enhance the colours or shades in a particular photo, or to give the photos a slight tint.

_______________

To use Manual Auto-exposure lock:

Go to Manual Settings (2) Tab and select AE Lock.

At EV = 0.0, Auto-exposure lock is turned off. Point camera towards any object and then change the EV to 0.3 or -0.3 to lock Auto-exposure.

USE:

This feature generally uses some type of “switch” that locks the exposure for the shot, after the initial reading has been made.

Normally, your camera determines the proper exposure automatically, based on several factors such as the lighting conditions, F-stop, and type of metering used.

By not “locking in” the exposure, the camera will re-calculate it, based on changes to the above factors.

Why is Camera Auto Exposure Lock important?

One of the main reasons you would want to use exposure lock is when taking a photograph of a scene with significant differences is shadow, light, and contrast. Depending upon the metering mode used, your camera will attempt to “average out” the exposure for the entire photo. Normally this is great. However, not every time.

For situations where you want to emphasize a specific part of the picture, or change the composition to get creative, an “averaged exposure” just won’t do. You can also manually control the exposure through exposure compensation, but using that approach is pretty much trial and error.

That is why your camera auto exposure lock (or, “AE-Lock”) should be the preferred method. It is far more accurate.

Another reason to use auto exposure lock is to “freeze” or “lock in” the same exposure parameters. When and if you become interested in “stitching together” several photos to create one large panorama, you will want to lock your exposure. When AE Lock is used, all settings for aperture, shutter speed, exposure and white balance are kept identical until you unlock them.

Besides, it can help you take great panorama shots. Normally the exposure of the three sections does not seem to match each other, but with AE Lock, that bug can be overcome.
Posted Image

——————————————————

RULE OF THIRDS
The rule of thirds is a compositional rule of thumb in visual arts such as painting, photography and design. The rule states that an image should be imagined as divided into nine equal parts by two equally-spaced horizontal lines and two equally-spaced vertical lines, and that important compositional elements should be placed along these lines or their intersections. Proponents of the technique claim that aligning a subject with these points creates more tension, energy and interest in the composition than simply centering the subject would.
Posted Image

MORE DETAILS HERE: http://en.wikipedia.org/wiki/Rule_of_thirds

Trojan001 was kind to add a rule-of -thirds image in an IC file for C905.
Download the IC pack Final v2 here: http://www.esato.com/board/viewtopic.php?topic=196052

The image can be called to the screen by pressing the 0 button.

——————————————————

copied it from http://witchkingdrivers.co.cc/?p=117
[ This Message was edited by: jason_mendez on 2010-07-06 07:21 ]


Posted by jason_mendez
Default Driver :






[ This Message was edited by: jason_mendez on 2010-07-06 07:36 ]


Posted by jason_mendez
More :





Posted by SonofLiberty

cbe 6.5

Posted by mlife
I started playing with this driver and I love what you can do with it but do have one suggestion / question... is there any way to get it to "force flash" without the pre-burst for red eye reduction ..... just one full power flash discharge with every shot or mabe even go one step further and allow for manual flash output control as well? this would be AWSOME for use with Nikon's SU-4 or any other optical trigger!




Posted by fazilhaq
do you have camdriver for vivaz pro?

Posted by wahehe15
I already stopped waiting for this driver...and now using Cybershot experience

Posted by bhooooooookk
i want to use Cybershot Xperience 6.5, but i dont know where i can paste the file...
huhuhu i need your help...

Posted by prototype

On 2010-08-04 10:00:31, bhooooooookk wrote:
i want to use Cybershot Xperience 6.5, but i dont know where i can paste the file...
huhuhu i need your help...



To put the driver in c905 you must to have the program A2 uploader
then download the "Cybershot Xperience 6.5" and put the camera file in IFS>SETTINGS>CAMERA
then the language file in TPA\\PRESET\\SYSTEM\\LANGUAGE (the phone must be turned off)
[ This Message was edited by: prototype on 2010-08-04 11:59 ]


Posted by bhooooooookk

On 2010-08-04 12:58:50, prototype wrote:

On 2010-08-04 10:00:31, bhooooooookk wrote:
i want to use Cybershot Xperience 6.5, but i dont know where i can paste the file...
huhuhu i need your help...



To put the driver in c905 you must to have the program A2 uploader
then download the "Cybershot Xperience 6.5" and put the camera file in IFS>SETTINGS>CAMERA
then the language file in TPA\PRESET\SYSTEM\LANGUAGE (the phone must be turned off)
[ This Message was edited by: prototype on 2010-08-04 11:59 ]



thanks a lot sir...

i have some question, i notice that my camera.. when i select black & white color, negative etc. the color output is the same, always show colored picture like normal.. there is a problem with my cam phone?


follow up question.. which of the camera driver for C905 is the best?
[ This Message was edited by: bhooooooookk on 2010-08-04 13:48 ]


Posted by prototype

On 2010-08-04 14:33:51, bhooooooookk wrote:

On 2010-08-04 12:58:50, prototype wrote:

On 2010-08-04 10:00:31, bhooooooookk wrote:
i want to use Cybershot Xperience 6.5, but i dont know where i can paste the file...
huhuhu i need your help...



To put the driver in c905 you must to have the program A2 uploader
then download the "Cybershot Xperience 6.5" and put the camera file in IFS>SETTINGS>CAMERA
then the language file in TPAPRESETSYSTEMLANGUAGE (the phone must be turned off)
[ This Message was edited by: prototype on 2010-08-04 11:59 ]



thanks a lot sir...

i have some question, i notice that my camera.. when i select black & white color, negative etc. the color output is the same, always show colored picture like normal.. there is a problem with my cam phone?


follow up question.. which of the camera driver for C905 is the best?
[ This Message was edited by: bhooooooookk on 2010-08-04 13:48 ]



Install the Cybershot Xperience 6.5 driver and the problem will be resolved and this is the best driver right now )))

Posted by bhooooooookk

On 2010-08-04 14:57:05, prototype wrote:

On 2010-08-04 14:33:51, bhooooooookk wrote:

On 2010-08-04 12:58:50, prototype wrote:

On 2010-08-04 10:00:31, bhooooooookk wrote:
i want to use Cybershot Xperience 6.5, but i dont know where i can paste the file...
huhuhu i need your help...



To put the driver in c905 you must to have the program A2 uploader
then download the "Cybershot Xperience 6.5" and put the camera file in IFS>SETTINGS>CAMERA
then the language file in TPAPRESETSYSTEMLANGUAGE (the phone must be turned off)
[ This Message was edited by: prototype on 2010-08-04 11:59 ]



thanks a lot sir...

i have some question, i notice that my camera.. when i select black & white color, negative etc. the color output is the same, always show colored picture like normal.. there is a problem with my cam phone?


follow up question.. which of the camera driver for C905 is the best?



Install the Cybershot Xperience 6.5 driver and the problem will be resolved and this is the best driver right now )))


for answering some of my question...

i have 1 last question, what is the working accoustic sound driver in ou phone?
and where i can put it? tsak! im very noob...
[ This Message was edited by: bhooooooookk on 2010-08-04 14:09 ]


Posted by prototype
better not put it in your phone

Posted by bhooooooookk
why sir, there is a problem in putting accoustics in our phone?

Posted by riksilvers
only if you want to risk blowin your phone speaker.

Posted by bhooooooookk
aw! i dont want to blown my phone speaker.. thanks..
im finish applying the cam mode.. thanks for the one wh help me..

shit! the error is back again, i can't select e.g b&w,sepia etc effects.. whats the problem?
[ This Message was edited by: bhooooooookk on 2010-08-04 14:44 ]


Posted by prototype




Original camera driver, again in power


Posted by Dimabr

On 2010-08-06 13:50:05, prototype wrote:




Original camera driver, again in power



Amazing

where i can get this camdrive?

Posted by prototype

On 2010-08-06 14:25:06, Dimabr wrote:

On 2010-08-06 13:50:05, prototype wrote:




Original camera driver, again in power



Amazing

where i can get this camdrive?


This is the original one that came out with firmware

Posted by jake20
@proto
Did you do any modding to the original camdriver?
Because original cam driver may take good pictures on AUTO, but there are no manual controls at all.
so if you want to take a picture in low light, or at night there is no way to control shutter speeds. you get tons of noise.
no forced flash, and also have smaller video resolutions as well.

Do you really think it takes better pictures than CBE 6.5?


Posted by prototype

On 2010-08-06 15:17:18, jake20 wrote:
@proto
Did you do any modding to the original camdriver?
Because original cam driver may take good pictures on AUTO, but there are no manual controls at all.
so if you want to take a picture in low light, or at night there is no way to control shutter speeds. you get tons of noise.
no forced flash, and also have smaller video resolutions as well.

Do you really think it takes better pictures than CBE 6.5?


*No modding to the original driver ))
I don't think that it takes better pictures than CBE 6.5
I just will play a few days with this driver, than back to CBE 6.5 )))
[ This Message was edited by: prototype on 2010-08-06 15:15 ]


Posted by prototype
Again original driver
[ This Message was edited by: prototype on 2010-08-06 16:58 ]


Posted by SEC905
I miss Darkmagician.........

Posted by bhooooooookk
where is darkmagician?

Posted by potsolin
Hi. First of all, greethings from Bulgaria. I baught a month ago my C905 and i am very happy with it.
I want to ask you. I recently uploaded dark magician 3.5 camdriver, and i want to ask those of you who use it, do you use color correction function or not ? I want to know, because i watched some photos from dm 3.5 on pages 87, 88 and i don't know if this function is on or not ? because colours are very good, so detail too.


Posted by masada1971
we all miss him,but as far as i know he retired from modding c905 because he got Satio...

Posted by jake20
DM's drivers were the best during its time.. but now CBE driver by Witchking is much better.
just use CBE 6.5 driver.. and the soon to be released 7.0



Posted by potsolin
Yeah, you're right. Today i put on my C905 CBE 6.5 and i love it. Manual options are great. Especially manual focus.
What will be the difference between 6.5 and 7 of CBE driver ?

Posted by thanhcong_to
i am developing Dm 3.8 (DM 3.8++), DM 3.8 is 4rever!!!!! /
you can down load test version here:
http://www.mediafire.com/?s9ymey5lo2mmxi8

-color, wb fix.
-xenon flash is better in R.E.R
-video record is: 352x288
-and in night mode is: VGA, but C905 can not play back this video! :-SS! you can watching on your PC.

check it here:
http://www.youtube.com/watch?v=cn_n1_mGxOE



in future, i'll add color saturation, contrast, hue ... in menu!
[ This Message was edited by: thanhcong_to on 2010-10-11 15:58 ]


Posted by samuele

On 2010-10-11 16:15:11, thanhcong_to wrote:
i am developing Dm 3.8 (DM 3.8++), DM 3.8 is 4rever!!!!! /
you can down load test version here:
http://www.mediafire.com/?s9ymey5lo2mmxi8

-color, wb fix.
-xenon flash is better in R.E.R
-video record is: 352x288
-and in night mode is: VGA, but C905 can not play back this video! :-SS! you can watching on your PC.

check it here:
http://www.youtube.com/watch?v=cn_n1_mGxOE


in future, i'll add color saturation, contrast, hue ... in menu!
[ This Message was edited by: thanhcong_to on 2010-10-11 15:58 ]


thanks thanhcong!

Posted by samuele
dm3.8++ (beta)by thanhcong_to

total darknes macro flash



total darknes all auto







Posted by thanhcong_to

On 2010-10-11 22:56:13, samuele wrote:
dm3.8++ (beta)by thanhcong_to



thanks you!

more pic:

day light:






twilight





[ This Message was edited by: thanhcong_to on 2010-10-12 08:14 ]


Posted by samuele
auto

dm3.8++ (beta)by thanhcong_to





auto

witching CBE 7.0




CBE 7.O WIN



Posted by jake20
i don't understand... DM driver was the best in its time , no doubt..
but now CBE 7.0 is better in every way.. why do people still love DM driver, when we have CBE 7.0?


Posted by nicusor
because most still do not know how to use the settings ... many do not know what each one uses

Posted by thanhcong_to

On 2010-10-12 17:57:17, nicusor wrote:
because most still do not know how to use the settings ... many do not know what each one uses


manual seting in CBE 7.0 (6.x ....) is very difficult (confusing) to use! i don't like that! , if DM continues devoloping his cam, Dm3.x will be better!

Posted by DDp
Is it true that with DM driver size of photo is 3-5 MB?
With CBE it 2-2.5 MB.
[ This Message was edited by: DDp on 2010-11-02 21:25 ]


Posted by thanhcong_to

On 2010-11-02 22:22:50, DDp wrote:
Is it true that with DM driver size of photo is 3-5 MB?
With CBE it 2-2.5 MB.
[ This Message was edited by: DDp on 2010-11-02 21:25 ]



yes. about 1.8-2.5Mb

..........

CX 7.5 test:





Posted by prototype


Posted by bhooooooookk
from the king of all cybershot's! phone hehehe


flower



flower



flower



Intel mobo



toshiba M645










Posted by rukna
CBE 7.5
Auto+Spot

Original

Posted by prototype
DM 3.5


Posted by prototype
Just a fresh orange

Posted by prototype
i wonder where have disappeared DM

Posted by prototype


Posted by WindowsSeven
Where is DM ?

Posted by nicusor

On 2010-12-18 17:05:31, WindowsSeven wrote:
Where is DM ?


in the past know that Alexis improves DarKMaGiCiaN drivers , but he gave no sign of life ... NISI
heiiiiiiii
where you all gone??

Posted by Dimabr

On 2010-12-18 17:05:31, WindowsSeven wrote:
Where is DM ?


I think he's in beach with beautiful girls nakedss


hahaha

Posted by trojan001
Muhaha


Pages:
Previous  123 ... 5556 575859  Next
Click to view updated thread with images


© Esato.com - From the Esato mobile phone discussion forum