Posted by brazzuka's
@jake20
THANK YOU for your willingness to assist with the c905. I appreciate your effort very much!
As far as manual ISO, we do have the DM3.8 modded driver which already has manual ISO, manual focus, a color correction option, and a partially or incorrectly implemented shutter speed option.
I would say that these are the things I would like to see in a modded cam driver..
1. Manual ISO (as many ISO choices as possible)
2. Manual Shutter Speed
3. Manual Color Saturation
4. Flash options (Forced and Reduced Flash power if possible)
5. Better Video quality
Jake at first would be a single driver without manual settings.Will try to optimize a single driver and adjust it and then later try to make a manual settings for c905 with some new mode of operation.The single driver for c905 would be equal to the other models with all optimized functions more manual iso working together in the Effects menu.
single driver c905
forced flash or without forced flash , the shutter speed xenon flash works
colors correction auto and scenes
xenon flash on => colors correction WB off disable and colors correction xenon flash on enable
xenon flash off => colors correction WB on enable and colors correction xenon flash off disable
xenon flash on => EV shutter speed xenon flash enable
xenon flash off => original EV whatīs this??? original EV (functions sensor: shutter speed, ISO works together)
If you want you can customize the area scene on the single driver with all the functions available.
About a camdriver manual settings in fact is already developed for some time and walks very well on k850 and c905 but the controller is in the EV with some features but we can leave after testing the single driver.We think that develop an optimized driver ready is a good option to be later implemented a manual settings, so the bugs or mistakes are minimized and the driver optimized more easily adapted to manual settings. What do you think guys.
cheers!
[ This Message was edited by: brazzuka's on 2010-03-26 17:28 ]
Posted by jake20
@brazzuka's
I am having a little trouble understanding your English here.. but no worries.
You are the expert, so however you would like to proceed is fine with me.
I will do whatever I can to assist you, and to help test. Just let me know what you need.
thanks again!!!
Posted by brazzuka's
@jake
Now who did not understand was I
What part you donīt understand? part of the logic programming if yes, relax forget about those terms and we will be more practical.When we have free time and a position on the driver, in the sense that the driver is responding well let's do the tests with all of you and continue taking nice pics.
Posted by jake20
It be very cool if we could have the choice on whether to turn on the LED light for still pictures.
So we would have a choice on whether to use the LED light or the XENON flash for still shots
is that even possible?
Posted by jake20
On 2010-03-26 13:12:17, K_Michael wrote:
My Driver for С905 Do not have manual settings.
All photos in auto
http://depositfiles.com/files/ccq9c69pd
[ This Message was edited by: K_Michael on 2010-03-26 12:22 ]
thanks Michael,
I am going to load your driver and take some shots.. thanks for sharing!
[ This Message was edited by: jake20 on 2010-03-26 23:59 ]
Posted by Bryan84
@brazzuka's Thanks for wanting to help improve!!!
Finally! Haha.
@Michael: Will be giving your driver a try!
Posted by Bryan84
K_Michael Driver
Posted by K_Michael
Thank you all!
Posted by edwardob
k michael?
do we us original language file with your drive?
Posted by K_Michael
On 2010-03-27 09:30:26, edwardob wrote:
k michael?
do we us original language file with your drive?
This is not necessary.
Posted by edwardob
not sure what you mean?.......which language file do we use?
Posted by K_Michael
On 2010-03-27 10:02:47, edwardob wrote:
not sure what you mean?.......which language file do we use?
You mean what language file?
Which is in folder languages?
Or what?
Explain, I can't guess)))
Posted by Raiderski
K_Michael
Picture of droplets is very nice!
Posted by Bryan84
On 2010-03-27 10:02:47, edwardob wrote:
not sure what you mean?.......which language file do we use?
Use the original one.
Posted by K_Michael
Raiderski Thank you
Posted by jake20
a few shots with K_Michael driver. I think on Auto mode with good lighting, this may take better pics than DM3.8. Its very hard to say really, but pics do appear to come out a little brighter in this driver, but sometimes too bright during strong sunlight.
I took a bunch of shots today with this driver, but a few of them cam out over exposed due to just too much sunlight.
I really didn't have this issue with DM 3.8.
I honestly can't see a huge difference between this driver or DM3.8 when on ALL AUTO. Nevertheless K_Michael driver does take some very nice shots as you can see.
Now if we can add some manual ISO controls/shutter speed to this driver, it would be very nice.
[ This Message was edited by: jake20 on 2010-03-27 20:32 ]
Posted by jake20
this shot was taken with DM 3.8 beta
what is interesting is that I took this pic on AUTO setting in a completely DARK room, yet the C905 chose ISO 64
Posted by landworby
Which is the best camera phone about these?
With modding camera driver?
k800i, K850i, c901, c905
I want to buy telephone, but i don't know which is the best camera phone now.
Please help me! THX!
Posted by jake20
On 2010-03-29 01:35:56, landworby wrote:
Which is the best camera phone about these?
With modding camera driver?
k800i, K850i, c901, c905
I want to buy telephone, but i don't know which is the best camera phone now.
Please help me! THX!
landworby,
this thread is a discussion about modifying the C905 camdriver, not a debate on which is the best camera phone.
you will find that everyone has a different opinion anyway..
Please, no thread hijacking here..
Posted by Bryan84
On 2010-03-29 05:02:18, jake20 wrote:
On 2010-03-29 01:35:56, landworby wrote:
Which is the best camera phone about these?
With modding camera driver?
k800i, K850i, c901, c905
I want to buy telephone, but i don't know which is the best camera phone now.
Please help me! THX!
landworby,
this thread is a discussion about modifying the C905 camdriver, not a debate on which is the best camera phone.
you will find that everyone has a different opinion anyway..
Please, no thread hijacking here..
Yup but with those 4 models that he put up, I would say C905.
Posted by jake20
On 2010-03-26 18:28:26, brazzuka's wrote:
@jake20
THANK YOU for your willingness to assist with the c905. I appreciate your effort very much!
As far as manual ISO, we do have the DM3.8 modded driver which already has manual ISO, manual focus, a color correction option, and a partially or incorrectly implemented shutter speed option.
I would say that these are the things I would like to see in a modded cam driver..
1. Manual ISO (as many ISO choices as possible)
2. Manual Shutter Speed
3. Manual Color Saturation
4. Flash options (Forced and Reduced Flash power if possible)
5. Better Video quality
Jake at first would be a single driver without manual settings.Will try to optimize a single driver and adjust it and then later try to make a manual settings for c905 with some new mode of operation.The single driver for c905 would be equal to the other models with all optimized functions more manual iso working together in the Effects menu.
single driver c905
forced flash or without forced flash , the shutter speed xenon flash works
colors correction auto and scenes
xenon flash on => colors correction WB off disable and colors correction xenon flash on enable
xenon flash off => colors correction WB on enable and colors correction xenon flash off disable
xenon flash on => EV shutter speed xenon flash enable
xenon flash off => original EV whatīs this??? original EV (functions sensor: shutter speed, ISO works together)
If you want you can customize the area scene on the single driver with all the functions available.
About a camdriver manual settings in fact is already developed for some time and walks very well on k850 and c905 but the controller is in the EV with some features but we can leave after testing the single driver.We think that develop an optimized driver ready is a good option to be later implemented a manual settings, so the bugs or mistakes are minimized and the driver optimized more easily adapted to manual settings. What do you think guys.
cheers!
[ This Message was edited by: brazzuka's on 2010-03-26 17:28 ]
ok brazzuka's, is your first C905 driver ready for test yet?
just kidding
Posted by mrozilla
In the end which driver is the best engine to C905?
Posted by masada1971
tested almost all,from k's michael since eltoffer's and dm's camdrivers,i would say dm's 3.8 is the best till now.although we have to wait because dm's 3.8 released was beta and not final and as far as i know brazukka is working on something good.and we all know what brazukka means in terms of modding.
[ This Message was edited by: masada1971 on 2010-03-31 16:58 ]
Posted by mrozilla
and something is known about the full version of DM when it will be more or less, or when Brazzuka show his work in the light of day?
Posted by masada1971
nope...nothing official...
Posted by Bryan84
For DM3.8 ... When I set Manual Shutter and use the EV-+ to adjust ... the lower my EV- (e.g. -2.0), my screen gets so dark ... and conversely more EV+ (e.g. +2.0), my screen gets so bright. What am I doing wrongly or that's the way? But if so, how can I take a good manual shutter shot?
Posted by masada1971
thats exactly how a lens with manual shutter,works..you ve to experiment with different ev sets to see whats fits you best depending of shot to be taken
Posted by Bryan84
But if it's so dark (-2.0), how do I take? Take at a very bright place?
Posted by masada1971
yes thats the point.. the lower the ev,the brighter the scene taken must be..
Posted by Bryan84
On 2010-04-01 09:00:05, masada1971 wrote:
yes thats the point.. the lower the ev,the brighter the scene taken must be..
=X Cause I thought manual shutter - i.e. the speed of the shutter will determine what kind of a photo I want ... not in the case of the shot being dark or not actually ...
trying to achieve something like...
and
and
any advice?
Posted by kaillylau
Picture of droplets and building is very good...what model take?
[ This Message was edited by: kaillylau on 2010-04-01 10:33 ]
Posted by landworby
Where can i download the DM 3.8 or K_Michel driver? I bought c905 yesterday.
)
Posted by Bryan84
On 2010-04-01 11:31:25, kaillylau wrote:
Picture of droplets and building is very good...what model take?
[ This Message was edited by: kaillylau on 2010-04-01 10:33 ]
I took those photos from google. not c905.
Posted by jake20
On 2010-04-01 12:14:41, landworby wrote:
Where can i download the DM 3.8 or K_Michel driver? I bought c905 yesterday.
)
congrats on getting the C905, its a great phone!
but don't be lazy and expect people to do everything for you here.. these drivers were just recently posted again only a few pages back, if you would of taken a few minutes and looked for yourself next time..
here they are for you.. this time
DM3.8 beta
http://www.2shared.com/file/8906978/54285a2e/camdriver038.html
k_michael
http://depositfiles.com/files/ccq9c69pd
Posted by jake20
On 2010-04-01 11:10:12, Bryan84 wrote:
On 2010-04-01 09:00:05, masada1971 wrote:
yes thats the point.. the lower the ev,the brighter the scene taken must be..
=X Cause I thought manual shutter - i.e. the speed of the shutter will determine what kind of a photo I want ... not in the case of the shot being dark or not actually ...
trying to achieve something like...
any advice?
Hi Bryan,
I don't think that shutter speed is correctly implemented in DM3.8 , so its hard to manually get a shot like the running waterfall water unless you select twilight landscape to get a long shutter speed.
Basically you need a slow shutter speed to get the moving water effect, and a very fast shutter speed to capture or "freeze" drops of water in time.
I was able to get a nice running waterfall picture last year with DM3.5, but I honestly am not sure how I did it. It was a combination of ISO + EV control.
here was the shot
[ This Message was edited by: jake20 on 2010-04-01 17:21 ]
Posted by prototype
Can someone tell me how to instal DM3.8 PLZ !
Posted by bluechip
On 2010-04-02 16:25:31, prototype wrote:
Can someone tell me how to instal DM3.8 PLZ !
Use A2 Uploader.
copy the 'camera.dat' file in IFS\\SETTINGS\\CAMERA folder...
also the 'en.lng' language file in TPA\\PRESET\\SYSTEM\\LANGUAGE...
Posted by prototype
the camdriver have not changed
Posted by landworby
R1AF035 is bad.... K_Michael and DM 3.8 is not working with 035..:S
Posted by prototype
On 2010-04-02 16:54:41, bluechip wrote:
On 2010-04-02 16:25:31, prototype wrote:
Can someone tell me how to instal DM3.8 PLZ !
Use A2 Uploader.
copy the 'camera.dat' file in IFSSETTINGSCAMERA folder...
also the 'en.lng' language file in TPAPRESETSYSTEMLANGUAGE...
[ This Message was edited by: prototype on 2010-04-02 16:41 ]
Posted by masada1971
dont delete any of them because your camera wont start again!!just replace camdriver0.dat with the one modded...
[ This Message was edited by: masada1971 on 2010-04-02 17:49 ]
Posted by Bryan84
On 2010-04-01 17:23:42, jake20 wrote:
On 2010-04-01 11:10:12, Bryan84 wrote:
On 2010-04-01 09:00:05, masada1971 wrote:
yes thats the point.. the lower the ev,the brighter the scene taken must be..
=X Cause I thought manual shutter - i.e. the speed of the shutter will determine what kind of a photo I want ... not in the case of the shot being dark or not actually ...
trying to achieve something like...
any advice?
Hi Bryan,
I don't think that shutter speed is correctly implemented in DM3.8 , so its hard to manually get a shot like the running waterfall water unless you select twilight landscape to get a long shutter speed.
Basically you need a slow shutter speed to get the moving water effect, and a very fast shutter speed to capture or "freeze" drops of water in time.
I was able to get a nice running waterfall picture last year with DM3.5, but I honestly am not sure how I did it. It was a combination of ISO + EV control.
here was the shot
[ This Message was edited by: jake20 on 2010-04-01 17:21 ]
Oh! Not properly implemented? So means if I do want to achieve those effort, I should try using Twilight Landscape (long shutter) and Sport (slow shutter, right?) mode you think?
Posted by bluechip
On 2010-04-02 17:38:07, prototype wrote:
On 2010-04-02 16:54:41, bluechip wrote:
On 2010-04-02 16:25:31, prototype wrote:
Can someone tell me how to instal DM3.8 PLZ !
Use A2 Uploader.
copy the 'camera.dat' file in IFSSETTINGSCAMERA folder...
also the 'en.lng' language file in TPAPRESETSYSTEMLANGUAGE...
[ This Message was edited by: prototype on 2010-04-02 16:41 ]
Just delete the camdriver0.dat file and copy the modded one.
and btw there is no problem in deleting the file...
your phone will be just fine...
Posted by prototype
On 2010-04-02 19:26:31, bluechip wrote:
On 2010-04-02 17:38:07, prototype wrote:
On 2010-04-02 16:54:41, bluechip wrote:
On 2010-04-02 16:25:31, prototype wrote:
Can someone tell me how to instal DM3.8 PLZ !
Use A2 Uploader.
copy the 'camera.dat' file in IFSSETTINGSCAMERA folder...
also the 'en.lng' language file in TPAPRESETSYSTEMLANGUAGE...
Just delete the camdriver0.dat file and copy the modded one.
and btw there is no problem in deleting the file...
your phone will be just fine...
I have a new camdriver
[ This Message was edited by: prototype on 2010-04-02 22:06 ]
Posted by masada1971
[ This Message was edited by: masada1971 on 2010-04-03 08:22 ]
Posted by prototype
Witch is the best CAMDRIVER for c905??
Posted by masada1971
i use DM's 3.8 and i am more than happy... ever since i dont carry my DSLR with me anymore,just my trustworthy c905 camera-phone...
[ This Message was edited by: masada1971 on 2010-04-03 13:40 ]
Posted by prototype
On 2010-04-03 14:36:10, masada1971 wrote:
i use DM's 3.8 and i am more than happy... ever since i dont carry my DSLR with me anymore,just my trustworthy c905 camera-phone...
[ This Message was edited by: masada1971 on 2010-04-03 13:40 ]
what are the difference between original camdriver and DM 3.8?? can you show me some photos were i can see this difference??
Posted by jake20
@prototype
just look back in this thread and you will see sample photos.. your just going to have to make some effort and take some time out of your day to do some research yourself.
Original camdriver pics are at the very beginning, and DM 3.8 towards the end.
Everything is here in this thread..
Posted by prototype
@jake20
What camdriver do you use?
if Dm 3.8 can i see some photos made by you