Posted by prilo
DM 3.8
[ This Message was edited by: prilo on 2010-02-12 16:41 ]
Posted by rippi
I cant say anythig about DM 3.5/3.8 and Eltoffers Driver because i never tried them. DM has my deep respect, hes a modder from the beginning of C905 modding. But i think the C905 original driver isn`t so bad, not like the one in K800 wehere modding was a must and most of the C905 disadvantages are hardware limited (noise, sharpness,...) and can`t not be solved with modded drivers. I don`t need a supermod, manual driver. My C905 is just a Point and shoot cam. For high quality pics i use my DSLR.
But i still looking for next all-auto-DM driver (alpha version) or an SE-Phone with less Megapixels but Exmor R-Sensor and a better lens
Rippi 2.71 based on Firmware R1DA034. The newest original driver is 2.8 and the first original driver was 2.4.
Posted by Lazaruslong
What about color rendering and color accuracy?
Who will fix reds? Does anybody noticed that the red in pictures is actually magenta?
I`ve noticed this since C905 is out on the market. This is not case when white balance is on Cloudy (this puts some yellow and compensates these magenta tones). Sometimes, putting daylight as white balance fix reds in outdoor shoots.
This “problem” remains on both DM and rippi drivers and on original driver. Sometimes colors is washed out but this can be fixed with lowering exposition values to minus values.
Okay, maybe this problems seems not big deal but in everyday shooting is irritating
Thanks
P.S
For example,red remains red in K 800/810
Posted by edenpunyo
Hi there,
I unable to download Rippi 2.71 from www.2shared.com.
Can upload it to www.4shared.com......
I will really appreciated it.
Thank you so much!!
Posted by edenpunyo
On 2010-03-01 06:49:20, edenpunyo wrote:
Hi there,
I unable to download Rippi 2.71 from http://www.2shared.com.
Can upload it to http://www.4shared.com......
I will really appreciated it.
Thank you so much!!
No need guys!
Problem solved.
I already using the Rippi 2.71 camdriver. Excellent!
Posted by anouk82
I modded dm 3.5 so it can reach 7.5 mb filesize.Also sharpness to max.
[ This Message was edited by: anouk82 on 2010-03-01 14:33 ]
Posted by masada1971
where can we find your camdriver anouk??
[ This Message was edited by: masada1971 on 2010-03-01 16:03 ]
Posted by superleeds27
I too would like to try this driver
Posted by anouk82
On 2010-03-01 17:03:07, masada1971 wrote:
where can we find your camdriver anouk??
[ This Message was edited by: masada1971 on 2010-03-01 16:03 ]
here it is
http://www.4shared.com/file/232259739/4c9d024f/camdriver0.html
Posted by masada1971
thanks..we will give it a try...
Posted by edenpunyo
Guys, so far i had try all of our modder's camdriver and they all look excellent at their own way and our needed but one thing in common when we take pictures in a low light...even we had set the correct ISO but no sharpness on the picture. Do any of our modders can solve this problem?
Posted by jake20
On 2010-03-02 17:31:56, edenpunyo wrote:
Guys, so far i had try all of our modder's camdriver and they all look excellent at their own way and our needed but one thing in common when we take pictures in a low light...even we had set the correct ISO but no sharpness on the picture. Do any of our modders can solve this problem?
there are NO more active modders left here for the C905 sadly..
they have all moved on to other phones
Posted by wahehe15
C905's camera driver is stuck on 3.8 beta
Posted by edenpunyo
On 2010-03-02 20:32:43, jake20 wrote:
On 2010-03-02 17:31:56, edenpunyo wrote:
Guys, so far i had try all of our modder's camdriver and they all look excellent at their own way and our needed but one thing in common when we take pictures in a low light...even we had set the correct ISO but no sharpness on the picture. Do any of our modders can solve this problem?
there are NO more active modders left here for the C905 sadly..
they have all moved on to other phones
Really? waaaaaa......so sad man.....sometimes i wonder there are lots of modders to mod the K850 and everytime they keep upgrading their camdriver....so sad why the modders stop the C905 camdriver.....waaaaaa......i really need the modders to mod at least can make the camdriver, at least near to Sony Digital camera quality.....waaaaaaaaaaaaaa....
Posted by Tiesiog
Yeah, its ironic.. Best pictures taking phone but all modders gone away..
[ This Message was edited by: Tiesiog on 2010-03-04 19:43 ]
Posted by anouk82
if only Raider could step in...someone lend him a phone.i am willing to send him some money if it's possible.We must support him...
Posted by jake20
i would donate some money to help him with C905 camera modding
Posted by Bryan84
I shall go ahead and try Rippi 2.71.
Posted by Tiesiog
Hey, not knowing that it was needed, i deleted camera2.dat file :/ Now i'm having problems with video watching, so maybe someone here have that file and can upload it? Would be very helpfull
EDIT:
Nevermind, fixed problem.
[ This Message was edited by: Tiesiog on 2010-03-06 10:20 ]
Posted by superleeds27
Spoke to DM today, he said he would like to carry on modding for the C905, but doesn't have the time unfortunately!
Posted by Bryan84
On 2010-03-08 22:27:52, superleeds27 wrote:
Spoke to DM today, he said he would like to carry on modding for the C905, but doesn't have the time unfortunately!
Anything that would make him change his mind? Tell him how much we miss him, his work? Or come back to bring a final 4.0 for us?
Posted by superleeds27
He also emailed me today and stated:
still have my C905 just to complete the driver
each time I start modding the 3.8 , new work come to me that is the reason for the delay
I have my list of the bug that need to be fixed and thing that need to be added like the manual color saturation which I already added to the driver
I'm afraid this may take long time and I dont want you to wait for something that my not come .
I've mentioned him fixing one bug at a time and releasing Alphas for us to try, instead of trying to fix all things before releasing!
Posted by jake20
On 2010-03-09 19:26:46, superleeds27 wrote:
He also emailed me today and stated:
still have my C905 just to complete the driver
each time I start modding the 3.8 , new work come to me that is the reason for the delay
I have my list of the bug that need to be fixed and thing that need to be added like the manual color saturation which I already added to the driver
I'm afraid this may take long time and I dont want you to wait for something that my not come .
I've mentioned him fixing one bug at a time and releasing Alphas for us to try, instead of trying to fix all things before releasing!
this is good news. seems that DM is aware of exactly what needs to be fixed/added, and that his work is also appreciated here.
I have faith that he will put out a new driver eventually.
Posted by Bryan84
On 2010-03-09 20:44:16, jake20 wrote:
On 2010-03-09 19:26:46, superleeds27 wrote:
He also emailed me today and stated:
still have my C905 just to complete the driver
each time I start modding the 3.8 , new work come to me that is the reason for the delay
I have my list of the bug that need to be fixed and thing that need to be added like the manual color saturation which I already added to the driver
I'm afraid this may take long time and I dont want you to wait for something that my not come .
I've mentioned him fixing one bug at a time and releasing Alphas for us to try, instead of trying to fix all things before releasing!
this is good news. seems that DM is aware of exactly what needs to be fixed/added, and that his work is also appreciated here.
I have faith that he will put out a new driver eventually.
Matter of time eh?
Posted by trojan001
hi all .my new c905i
. i m using D.M v3.8 Beta ... But I have a problem..
sample
look at this
FOCUS >> AUTO--
FOCUS >> MACRO--
WTF??
OTHER SAMPLE
[ This Message was edited by: trojan001 on 2010-03-12 17:44 ]
Posted by Raiderski
too close from the camera to the object for autofocus but ok for macro focus
Posted by trojan001
On 2010-03-12 20:26:39, Raiderski wrote:
too close from the camera to the object for autofocus but ok for macro focus
Sorry Raderski..u are nice modifier but i cant understand
sorry for my bad english 
autofocus settings = macro or auto? what is my problem?
pls write understandable
[ This Message was edited by: trojan001 on 2010-03-13 00:40 ]
Posted by Raiderski
Posted by jlieu
The modded C905 cam driver GOOD!!!!! perhaps anyone can convert it to suit w995...
or make one like this...
Posted by trojan001
On 2010-03-13 08:56:30, Raiderski wrote:
thank you very much sir.i understand.
again, thanks!
Posted by zagi988
can anybody give me a link to download language editor or something like that so I can make hr.lng file? (croatian language file for DM 3.5)
Posted by brazzuka's
@ zagi988
can anybody give me a link to download language editor or something like that so I can make hr.lng file? (croatian language file for DM 3.5)
here: SE-NSE
Posted by Bryan84
Wakey wakey topic!
On 2010-03-01 15:00:04, anouk82 wrote:
I modded dm 3.5 so it can reach 7.5 mb filesize.Also sharpness to max.
[ This Message was edited by: anouk82 on 2010-03-01 14:33 ]
Does DM3.5 need to upload any .lng file too? I can't remember. Because I am willing to try your modded of the DM3.5 which I already downloaded. If any .lng is needed, can you upload it please?
[ This Message was edited by: Bryan84 on 2010-03-18 16:05 ]
Posted by mrozilla
Where can I find the latest driver for the DM and a name to it? Browse this thread but nothing specific I can not find, let alone link to it
Posted by jake20
On 2010-03-20 17:58:13, mrozilla wrote:
Where can I find the latest driver for the DM and a name to it? Browse this thread but nothing specific I can not find, let alone link to it
On 2009-11-03 21:41:06, DarKMaGiCiaN wrote:
hi All
sorry again for the delay
the new driver is not finished yet
I really dont have time to finish it at the same time I dont want you to wait more
therefore here is the DM 3.8 (( still beta version ))
what's new
========
replaced WhiteBalance menu
Auto
Color Correction
Focus
Effect/WB (-= Effect & +=WB)
Shutter Speed
minor edit to improve the indoor shots ( I dont know if it is better now or it become worse !! )
bugs
========
when you set Effect/WB then tried to edit focus Effect/WB will set back to Auto
when you set the focus and take the shot , focus set back to normal and you have to set it again
Shutter Speed is not working properly
things supposed to be in the driver (( it will be in the next version ))
=========
sure I have to fix all the bugs
thinking of setting the fine mode to be normal and normal mode to be EM
improve video recording
download link:
http://www.2shared.com/file/8906978/54285a2e/camdriver038.html
sorry again
Posted by mrozilla
thank you very much, and an instruction manual for this? I guess it is not like using a standard controller
Posted by brazzuka's
so guys you are not using the forced flash in c905 or what?
About shutter speed xenon flash how this works? About the shutter speed you can change the register of ( constant shutter speed) and use the manual shutter speed.
cheers and X10 coming!
Posted by leoumar
Hi,
Thanks to every one who participated to development of new drivers. I am new to this forum and i was reading this whole stuff (170 pages) since 2 days , I tried to read it all but its a long thread. Anway I was Finally able to debrand my Orange C905 to Orignal SE. I have also replace DM 3.8. Now I can see some new changes like ISO 100,200,300,400. And some settings like Color Correction , Focus , Effect/WB, and Shutter Speed.
I tried to get snaps with different settings as people said in earlier posts. there is a big difference even i wasnt aware of what these settings are doing . So please can any one give Some details or mention the page number of this thread if already been given.
I read people are saying " change shutter speed by EV+- key, Sorry I cant found these keys , in other words how to set values to new settings like Effect/WB or Shutter Speed.
P.S.
I know here people are much expert and my question might be stupid , but your help will be appriciated.
Thanks
[ This Message was edited by: leoumar on 2010-03-23 17:57 ]
Posted by tranced
On 2010-03-23 18:53:49, leoumar wrote:
I read people are saying " change shutter speed by EV+- key, Sorry I cant found these keys , in other words how to set values to new settings like Effect/WB or Shutter Speed.
The EV+- mean the dpad being press right(+) or left(-) when the phone is horizontal.
Posted by jake20
On 2010-03-23 14:02:10, brazzuka's wrote:
so guys you are not using the forced flash in c905 or what?
About shutter speed xenon flash how this works? About the shutter speed you can change the register of ( constant shutter speed) and use the manual shutter speed.
cheers and X10 coming!
brazzuka, how about helping us out here with a brazzuka modified C905 cam driver?
I'd be willing to send you a small donation to help with your efforts.
how about it?
thanks
Posted by masada1971
thats great news if brazzuka could make a camdriver for c905..i love all his previous works with other
models...
Posted by edwardob
On 2010-03-23 14:02:10, brazzuka's wrote:
so guys you are not using the forced flash in c905 or what?
forced flash is possible is it?
the only thing that's missing for me
Posted by jake20
i'd like to see flash level control also.. being able to reduce the brightness of the flash
Posted by leoumar
I tried by pressing Dpad right and left keys, after selecting Shutter speed but nothing appears. there isnt any value increasing or decreasing , even when i press right it goes to next menu which is ISO.
Posted by Skylow
On 2010-03-24 05:18:53, leoumar wrote:
I tried by pressing Dpad right and left keys, after selecting Shutter speed but nothing appears. there isnt any value increasing or decreasing , even when i press right it goes to next menu which is ISO.
Leoumar....
First select the option in the menu for the shutter speed or what you want to change manually....
Then, not in the settings menu of camera but ready to take a photo, press the right-pad key to "open" the shutter speed change seetings and press up-pad or down-pad button to change vallues.
It's in the same way you change de exposition in the original camera drivers...
Posted by leoumar
OK, I got that , actually either I select Shutter speed , Focus or any thing else , it was showing word "Exposure" -2 to +2, So I was confused that if its changing exposure settings.
Thanks for helping. It will be a great favor to every one , if some one can make a instruction manual for new drivers.
[ This Message was edited by: leoumar on 2010-03-24 11:03 ]
Posted by sipee27
which cam driver shud i go for im confused??
dm 3.5 or 3.8??
i dont want iso setting, i need effects, i tried installin dm 3.5 and kept white white balance on daylght but indoor images comes too yellowish in yellow light...
and one more query i have is wat is metering mode used for???
Posted by K_Michael
My Driver for С905 Do not have manual settings.
All photos in auto
http://depositfiles.com/files/ccq9c69pd
sample photo
ORIGINAL
MY DRIVER
ORIGINAL
DM 3.8
MY DRIVER
[ This Message was edited by: K_Michael on 2010-03-26 12:22 ]
Posted by brazzuka's
@jake20
We can help with some contributions but in the case of donations is not necessary jake but thank
donations maybe only to support programs with android anyway tnks jake.
Maybe we can optimize the c905 as in other models. First as the c905 has no UI for manual iso, can implement the manual iso together on the Effects menu in which case we would have two options: one for photo and one for video.
Ex: Menu>>Effects>>Photo/Video
Photo= manual iso
Video= original effects
About flash forced and shutter speed flash xenon you decide whether or not there is a need. Video resolution need for two resolutions CIF and QVGA mode menu? guys you decide this features if useful and usable.
What do you think guys?
@K_Michael
nice shoots with more colors saturation with WB no
cheers and nice week 2 all
[ This Message was edited by: brazzuka's on 2010-03-26 14:59 ]
Posted by jake20
@brazzuka's
THANK YOU for your willingness to assist with the c905. I appreciate your effort very much!
As far as manual ISO, we do have the DM3.8 modded driver which already has manual ISO, manual focus, a color correction option, and a partially or incorrectly implemented shutter speed option.
I would say that these are the things I would like to see in a modded cam driver..
1. Manual ISO (as many ISO choices as possible)
2. Manual Shutter Speed
3. Manual Color Saturation
4. Flash options (Forced and Reduced Flash power if possible)
5. Better Video quality