Posted by mriley
was there a readme file that came with the downloaded camera driver?
Posted by jake20
@fangdue
man you better be careful and not get bitten by all of these insects!!
nice shots
Posted by jake20
On 2009-12-12 16:48:24, Bryan84 wrote:
On 2009-12-12 09:40:39, Bryan84 wrote:
Ok I just upgraded to 3.8 Beta. I see Shutter Speed and Focus option. But how do I make use of it? Example once I set Shutter Speed, how do I control it? Same goes for Focus.
Thanks.
Anyone care to help?
Bryan,
once you set the option for focus or shutter control, then just use the regular EV control button (press up on direction pad - SUN icon) when you have your camera pointed at the subject then left or right to raise or lower the values of focus or shutter speed depending on what was selected in the options menu.
[ This Message was edited by: jake20 on 2009-12-12 16:15 ]
Posted by Bryan84
On 2009-12-12 17:14:58, jake20 wrote:
On 2009-12-12 16:48:24, Bryan84 wrote:
On 2009-12-12 09:40:39, Bryan84 wrote:
Ok I just upgraded to 3.8 Beta. I see Shutter Speed and Focus option. But how do I make use of it? Example once I set Shutter Speed, how do I control it? Same goes for Focus.
Thanks.
Anyone care to help?
Bryan,
once you set the option for focus or shutter control, then just use the regular EV control button (press up on direction pad - SUN icon) when you have your camera pointed at the subject then left or right to raise or lower the values of focus or shutter speed depending on what was selected in the options menu.
[ This Message was edited by: jake20 on 2009-12-12 16:15 ]
Oh thanks. I wish I can learn how to make use of the Manual Shutter and Focus more. Any tips and tricks?
So the EV only works with AUTO/Color Correction now?
Posted by fangdue
@ mriley : thanks
@jake20: thanks, but he a moth, so he can't hurt my forefinger
@riksilvers : thanks
[ This Message was edited by: fangdue on 2009-12-13 01:33 ]
Posted by fangdue
little spider
have breakfast
Posted by jake20
Had a strange issue tonight.. i am not sure if my C905 is becoming faulty or it was just the lighting and my camera settings with DM 3.8
I was taking an indoor shot tonight... semi low light.. and if I set the ISO to 100 and cranked up the shutter speed to EV2.0 , the camera had a hard time focusing on a subject like 6-7 feet away. If i switched back to all auto settings, it was fine.
very strange..
Posted by Bryan84
On 2009-12-13 04:49:22, jake20 wrote:
Had a strange issue tonight.. i am not sure if my C905 is becoming faulty or it was just the lighting and my camera settings with DM 3.8
I was taking an indoor shot tonight... semi low light.. and if I set the ISO to 100 and cranked up the shutter speed to EV2.0 , the camera had a hard time focusing on a subject like 6-7 feet away. If i switched back to all auto settings, it was fine.
very strange..
Any tips & tricks in using manual focus and shutter?
The lesser the EV setting, the closer (focus) and slower (shutter) speed?
Posted by brazzuka's
I donīt want to spoil the joy of you guys but if am not mistaken none of the drivers c905 used today is implemented manual shutter speed.You are using the shutter speed constant and not manual shutter speed in this model c905.
You can read the other topics here in esato and find the register for the manual shutter speed implemented a long time ago in the others models.
We forgot to tell the DarkMagician about this.
cheers and Christmas is coming guys!!!
[ This Message was edited by: brazzuka's on 2009-12-13 16:24 ]
Posted by bluechip
On 2009-12-13 13:00:29, brazzuka's wrote:
I donīt want to spoil the joy of you guys but if am not mistaken none of the drivers c905 used today is implemented manual shutter speed.You are using the shutter speed constant and not shutter speed manual in this model c905.
You can read the other topics here in esato and find the register for the manual shutter speed implemented a long time ago in the others models.
We forgot to tell the DarkMagician about this.
cheers and Christmas is coming guys!!!
[ This Message was edited by: brazzuka's on 2009-12-13 12:49 ]
HI ALL..
first of all can anyone give me the link for DM3.8..?
second thing is that, my camera "help text" is not changing even if i change the modded "en.lng" file...
its the same factory default menu... pls help..
Posted by Bryan84
On 2009-12-13 13:59:36, bluechip wrote:
On 2009-12-13 13:00:29, brazzuka's wrote:
I donīt want to spoil the joy of you guys but if am not mistaken none of the drivers c905 used today is implemented manual shutter speed.You are using the shutter speed constant and not shutter speed manual in this model c905.
You can read the other topics here in esato and find the register for the manual shutter speed implemented a long time ago in the others models.
We forgot to tell the DarkMagician about this.
cheers and Christmas is coming guys!!!
[ This Message was edited by: brazzuka's on 2009-12-13 12:49 ]
HI ALL..
first of all can anyone give me the link for DM3.8..?
second thing is that, my camera "help text" is not changing even if i change the modded "en.lng" file...
its the same factory default menu... pls help..
Check out page 125 I think.
Posted by mriley
On 2009-12-13 13:00:29, brazzuka's wrote:
I donīt want to spoil the joy of you guys but if am not mistaken none of the drivers c905 used today is implemented manual shutter speed.You are using the shutter speed constant and not manual shutter speed in this model c905.
You can read the other topics here in esato and find the register for the manual shutter speed implemented a long time ago in the others models.
We forgot to tell the DarkMagician about this.
cheers and Christmas is coming guys!!!
[ This Message was edited by: brazzuka's on 2009-12-13 16:24 ]
why does this matter if it still works?
Posted by zilver_123
Hi I have noticed in some night shots with my c905 when using the flash in red-eye reduction mode or normal flash, which the photos come out like drops or certain particles, this is normal? an example here, I hope your help ...
PD: use the camdriver CS Xperience 4.1 + DM 3.5 by Vit
[ This Message was edited by: zilver_123 on 2009-12-13 18:04 ]
Posted by panonski
this drops are alienns
Posted by jake20
On 2009-12-13 13:00:29, brazzuka's wrote:
I donīt want to spoil the joy of you guys but if am not mistaken none of the drivers c905 used today is implemented manual shutter speed.You are using the shutter speed constant and not manual shutter speed in this model c905.
You can read the other topics here in esato and find the register for the manual shutter speed implemented a long time ago in the others models.
We forgot to tell the DarkMagician about this.
cheers and Christmas is coming guys!!!
[ This Message was edited by: brazzuka's on 2009-12-13 16:24 ]
I am not sure you are correct brazzuka's.. When you manually set the ISO level in DM3.8, the shutter speed control seems to work fine, but its only if you set a manual ISO level.
Posted by brazzuka's
@jake20
On 2009-12-13 13:00:29, brazzuka's wrote:
I donīt want to spoil the joy of you guys but if am not mistaken none of the drivers c905 used today is implemented manual shutter speed.You are using the shutter speed constant and not manual shutter speed in this model c905.
You can read the other topics here in esato and find the register for the manual shutter speed implemented a long time ago in the others models.
We forgot to tell the DarkMagician about this.
cheers and Christmas is coming guys!!!
[ This Message was edited by: brazzuka's on 2009-12-13 16:24 ]
I am not sure you are correct brazzuka's.. When you manually set the ISO level in DM3.8, the shutter speed control seems to work fine, but its only if you set a manual ISO level.
The reg for manual shutter speed has to be used separately from the manual iso to have some purpose but can work together in the final composition of a picture as it is in fact a proposal for a manual settings.
manual iso and manual iso xenon flash in DM 3.8 is in effects works fine but not have manual shutter speed.
Do the test and see if the manual shutter speed is working properly, because in principle you are using the constant shutter speed register, do the test yourself.
constant shutter speed = the shutter depends on the luminosity.
manual shutter speed = the shutter independs on the luminosity.
In the same controller, in the same key you are using 5 different functions and I think it isnīt a good idea and one more thing to color correction is not enabled or not this is working well.
In fact is that the manual shutter speed is not the right register, let's see if we can get in touch with the DM.
Posted by danekro
i too have this problem with some photos in some conditions...when i toake a photo at night, in plaes where humidity is higher,y take photos with drops.....
Posted by sxk100
Hello Guys,
I just updated my camdriver to DM3.8 but I do not see any changes to my menu. It stills stays the same as before. I bought my c905a from Walmart (ATT). I uploaded using A2uploader and made sure the new "camdriver0.dat" and "en.lng" files were loaded to the appropriate folders. I am not sure if I am missing something. The old "camdriver0.dat" had a date of May09 before I replaced with the newer one from DM. Also, I found two other files under the settings/camera folder - camdriver1.dat and camdriver2.dat which I left untouched.
I have not debranded or done any SEUS since I bough the phone.
Please help me resolve.
Thanks in advance.
sxk100
Posted by wahehe15
try using my en.lng file this is from dm but I corrected it
http://www.mediafire.com/?dnj3mjte3w4
make sure that you use this directory
TPA / PRESET / SYSTEM / LANGUAGE
Posted by sxk100
Thanks wahehe15. I in fact used your en.lng file from this thread. Still I do not see any changes. I am wondering if I needed a firmware upgrade or SEUS for DM3.8 to work? As I mentioned before, all the files in my phone were dated back to May 2009.
I would really to debrand the phone to get WIFI and also update the camdriver to DM's. I am not sure of the steps to follow though (I mean which one should proceed first or second).
Thanks again,
sxk100
Posted by Bialynia
On 2009-12-13 23:44:00, danekro wrote:
i too have this problem with some photos in some conditions...when i toake a photo at night, in plaes where humidity is higher,y take photos with drops.....
zilver_123 wrote:Hi I have noticed in some night shots with my c905 when using the flash in red-eye reduction mode or normal flash, which the photos come out like drops or certain particles, this is normal? an example here, I hope your help ...
When the flash and lens are spaced very close together you get these halos when the flash catches dust that reflects the light back. You don't get this problem on cameras where the flash has a bit of distance from the lens as the light doe snot get reflected back.
Posted by riksilvers
On 2009-12-14 21:57:46, sxk100 wrote:
Thanks wahehe15. I in fact used your en.lng file from this thread. Still I do not see any changes. I am wondering if I needed a firmware upgrade or SEUS for DM3.8 to work? As I mentioned before, all the files in my phone were dated back to May 2009.
I would really to debrand the phone to get WIFI and also update the camdriver to DM's. I am not sure of the steps to follow though (I mean which one should proceed first or second).
Thanks again,
sxk100
@sxk100
I had the same problem and I had to debrand to get the lng files to work.
Step 1 - debrand
Step 2 - firmware update
Step 3 - update the cam driver to Vits or DM3.5 or DM3.8
[ This Message was edited by: riksilvers on 2009-12-14 23:40 ]
Posted by sxk100
Thanks Ricksilvers - I will give it a shot (CyberShot, at that
)
Posted by fangdue
apricot blossom from Vietnam, Lunar New Year is coming soon
Posted by Bryan84
More flowers with DM3.8
I'm still trying to figure out best ways to use Manual Focus and Shutter Speed. Can anyone care to share tips of when/where to use those two functions?
Posted by Roben
Hi all, do you use stabiliser while taking photos with DM 3.8? I couldn'n have any results in this rainy snowy foggy.. etc. weather :/ (And sorry for my english
it must be very funny 
)
Posted by Bryan84
On 2009-12-16 13:40:27, Roben wrote:
Hi all, do you use stabiliser while taking photos with DM 3.8? I couldn'n have any results in this rainy snowy foggy.. etc. weather :/ (And sorry for my english
it must be very funny )
Yes I leave it on because I have shaky hands.
Posted by wahehe15
I don't use stabilizer cause the pics are better w/o it
Posted by jake20
DM 3.8 low light, ISO 100, shutter speed +0.7
Posted by fangdue
manual focus
Posted by Northerner
On 2009-12-17 11:14:06, fangdue wrote:
manual focus
Thats just a great shot.
Posted by sxk100
Thanks ricksilvers and wahehe15, I just finished debranding and did SEUS and updated to DM3.8. Everything seems to work fine. Thanks again for the help.
-sxk100
On 2009-12-15 01:00:55, sxk100 wrote:
Thanks Ricksilvers - I will give it a shot (CyberShot, at that
)
Posted by jake20
On 2009-12-13 23:34:10, brazzuka's wrote:
@jake20
On 2009-12-13 13:00:29, brazzuka's wrote:
I donīt want to spoil the joy of you guys but if am not mistaken none of the drivers c905 used today is implemented manual shutter speed.You are using the shutter speed constant and not manual shutter speed in this model c905.
You can read the other topics here in esato and find the register for the manual shutter speed implemented a long time ago in the others models.
We forgot to tell the DarkMagician about this.
cheers and Christmas is coming guys!!!
[ This Message was edited by: brazzuka's on 2009-12-13 16:24 ]
I am not sure you are correct brazzuka's.. When you manually set the ISO level in DM3.8, the shutter speed control seems to work fine, but its only if you set a manual ISO level.
The reg for manual shutter speed has to be used separately from the manual iso to have some purpose but can work together in the final composition of a picture as it is in fact a proposal for a manual settings.
manual iso and manual iso xenon flash in DM 3.8 is in effects works fine but not have manual shutter speed.
Do the test and see if the manual shutter speed is working properly, because in principle you are using the constant shutter speed register, do the test yourself.
constant shutter speed = the shutter depends on the luminosity.
manual shutter speed = the shutter independs on the luminosity.
In the same controller, in the same key you are using 5 different functions and I think it isnīt a good idea and one more thing to color correction is not enabled or not this is working well.
In fact is that the manual shutter speed is not the right register, let's see if we can get in touch with the DM.
brazzuka's,
it seems we have lost all of our C905 camera modder's. Since you are also a camera mod expert, any chance you could pick up where Vit and DM have left off?
Posted by CaptainLuck
The new orginal Sony Ericsson driver in comparison with the new Dark Magician Driver:
Orginal CamDriver 2.53
DM 3.8
Orginal CamDriver 2.53
DM 3.8
Orginal CamDriver 2.53
DM 3.8
Orginal CamDriver 2.53
DM 3.8
Orginal CamDriver 2.53
DM 3.8
Orginal CamDriver 2.53
DM 3.8
DM 3.8:
[ This Message was edited by: CaptainLuck on 2009-12-19 14:01 ]
Posted by fangdue
More pics
Posted by jake20
guys,
all of these new pictures are great, but we need a new modder to just finish up a few details to make the best driver for C905.
We need manual ISO, manual color saturation, and manual shutter speed all included and added to DM 3.8 or Vit's EMS driver.
To me that is all we need to make the best possible driver without being too complicated to use.
I was hoping that Brazzuka's could help us out here since he is a cam modder expert.
Posted by panonski
I hope so to....
or Raiderski could help ...
come on guys ...make us happy for a New Year
Posted by wahehe15
we really need it badly
Posted by Bryan84
DM, come back!
Posted by CaptainLuck
New pics with snow
Posted by panonski
On 2009-12-21 09:32:19, Bryan84 wrote:
DM, come back!
I heard today he's gone to Australia
Posted by Bryan84
On 2009-12-22 00:19:54, panonski wrote:
On 2009-12-21 09:32:19, Bryan84 wrote:
DM, come back!
I heard today he's gone to Australia
For holiday?
Posted by vijaynine3
Taken using My
C905 Pictures
Posted by bluechip
guys, i have a problem..
when i tried to change the language file "en.lng"
the language altogether changed to some other unknown one..(russian i think)
and also can anyone tell me how to change the fonts..?
cas when i change the fonts (ie i loaded the ttf fonts and replaced the fonts.xml with k850's) the
phone wont boot... just a blank screen.. pls help me.....
Posted by fe1ixs
Guys,
Merry christmas & happy new year to all of you!!
Thanks for all modder & poster for your excellent contribution.
Posted by wahehe15
@bluechip
I uploaded my En.lng file + fonts just paste it
Link text...
Posted by mikely_28
Hello M8s!
Merry Christmas and Happy New Year for all of U!
Posted by fangdue
Sunset
Posted by kronos12
Few Pics taken in late afternoon..Second one was teken from the moving car trou windshield...and third is without a flash
Posted by panonski
On 2009-12-26 18:39:08, kronos12 wrote:
Few Pics taken in late afternoon..Second one was teken from the moving car trou windshield...and third is without a flash
je li djiberu... ciji je porsh