Posted by rajac
On 2009-09-17 04:03:10, eltoffer wrote:
@anouk
hey body why you still keep hosting your images on esato i asked to host in other site to see ORIGINAL image QUIALITY
take a look what i mean
BTW it was with 3.7
[ This Message was edited by: eltoffer on 2009-09-17 03:08 ]
yes,the color is very good.What about night shot?
DM 3.2,as you see,there is no enough light.
[ This Message was edited by: rajac on 2009-09-17 04:03 ]
Posted by eltoffer
not enough light????????????????
what do you understand for EOUGH light? sun????
this is enough light for a night shot, could you do me a favor????
take a pic with both divers and same scene at night, i will try to do it too to compare, thanks
Posted by rajac
On 2009-09-17 05:23:06, eltoffer wrote:
not enough light????????????????
what do you understand for EOUGH light? sun????
this is enough light for a night shot, could you do me a favor????
take a pic with both divers and same scene at night, i will try to do it too to compare, thanks
yeah，I like the color of Toffer 3.7.But I have not tried it at night.
mmm,I'll try it .
Posted by eltoffer
due to my test i decide to release a new version 3.8
it has minimum changes the most important, FLASH COLOR
please try and rate, i think it gives more accurate color when flash is used, and the same color as 3.7 driver at "day pics" (vivid colors)
Toffer 3.8
http://www.4shared.com/file/133275540/d66823eb/camdriver0.html
Posted by Bryan84
Thanks eltoffer for 3.8
Here are test shots taken in my room. Room lightings may not be that good though.
AUTO ISO - AUTO FOCUS - FLASH
AUTO ISO - AUTO FOCUS - NO-FLASH
AUTO ISO - AUTO FOCUS - FLASH (In room with room lights off)
AUTO ISO - AUTO FOCUS - NO-FLASH (In room with room lights on)
Posted by anouk82
On 2009-09-17 04:03:10, eltoffer wrote:
@anouk
hey body why you still keep hosting your images on esato i asked to host in other site to see ORIGINAL image QUIALITY
take a look what i mean
BTW it was with 3.7
[ This Message was edited by: eltoffer on 2009-09-17 03:08 ]
OK but i don't know how to host it in other site...
Posted by mauasca
Eltoffer 3.8
Looks good. no?
Great job Eltoffer, Thank o_0
[ This Message was edited by: mauasca on 2009-09-17 20:16 ]
Posted by igica11
Why C905 in original camdrive and also in modded camdrive use shutter speed 1/120 when flash is used. Isnt that to fast shutter speed for low light situation? All my Canon cameras use 1/60 shutter speed when flash is used and some of them dont have optical image stabilizator.
There is also rule---- if the focal length is 60mm the “safe” shutter speed would be 1/60sec.
http://www.dyxum.com/columns/[....]Aperture_and_Shutter_Speed.asp
You can also google it and find a lot of corellation between focal length and safe shutter speed.
[ This Message was edited by: igica11 on 2009-09-17 20:16 ]
Posted by eltoffer
@anouk, just enter www.imageshack.us, then click browse select your image and tick RESIZE and select 1280*1024 and thats all
@mausaca
what do you think about colors now???? be honest ^^ it helps me to improve drivers
@igica11
well for a "flash shot" the faster the better to "freeze" the moment, if you add ms delay on flash it could helps to get a more enlightened environment
Posted by igica11
Sorry I dont understand what you mean with "if you add ms delay on flash". What is "ms delay"?
And tnx for camdrive
[ This Message was edited by: igica11 on 2009-09-17 21:21 ]
Posted by mauasca
@mausaca
what do you think about colors now???? be honest ^^ it helps me to improve drivers
no noise,
the colors are good,
but perhaps too vivicolor?!
However, it is a good driver ^ _ ^
Posted by cheeyh
I think 3.8 version colour is not so good (just for comment, hope elf you don't mind).
It's not same with the original colour after shot with flash.
Posted by eltoffer
On 2009-09-18 01:37:06, cheeyh wrote:
I think 3.8 version colour is not so good (just for comment, hope elf you don't mind).
It's not same with the original colour after shot with flash.
what do you mean????
Posted by Bryan84
On 2009-09-17 21:57:40, igica11 wrote:
Sorry I dont understand what you mean with "if you add ms delay on flash". What is "ms delay"?
And tnx for camdrive
[ This Message was edited by: igica11 on 2009-09-17 21:21 ]
Microseconds delay. I suppose.
Posted by igica11
On 2009-09-18 02:36:25, Bryan84 wrote:
On 2009-09-17 21:57:40, igica11 wrote:
Sorry I dont understand what you mean with "if you add ms delay on flash". What is "ms delay"?
And tnx for camdrive
[ This Message was edited by: igica11 on 2009-09-17 21:21 ]
Microseconds delay. I suppose.
I know that is Microseconds delay
But I dont know how can flash delay influence on picture exposure
Posted by eltoffer
in fact it is miliseconds delay, and its also known as SLOW SYNCHRO and it keeps subjects and distance background bright
example
Normal Flash
Slow synchro on flash
Posted by Bryan84
Woah! That's lots of difference!
Posted by cheeyh
On 2009-09-18 01:53:04, eltoffer wrote:
On 2009-09-18 01:37:06, cheeyh wrote:
I think 3.8 version colour is not so good (just for comment, hope elf you don't mind).
It's not same with the original colour after shot with flash.
what do you mean????
I mean is example the table is red colour, but when i take photo with flash, the table colour will become pink colour..
Posted by dark_axl21
errm guys i got a noob question but how do you access the manual iso settting with the DM's new 3.2 cam driver?
I installed the dat. and lng. file from the iso folder but i can't seem to find the settings part
I don't seem to have this part...
[ This Message was edited by: dark_axl21 on 2009-09-18 11:07 ]
Posted by igica11
eltoffer I understand now what you mean. Second picture is probably taken with very slow shutter speed-maybe 1/8-that is too low for my shaky hands
. I will experiance few days with shutter speed 1/60 and compare them with those taken with 1/120. Decreasing shutter speed from 1/120 to 1/60 camera will be able to expose the ambient light more properly for objects out of reach of the flash, like background-especially if backround have some source of light(for example in large hall). In low light situations with high shutter speed the background might appear very underexposed.
Picture taken with 1/60 wont be so "frozen" as with 1/120 but with appropriate sharpening this small disantvage can be solved.
PS
I dont use sharpening in camdrive (set to 0) because sharpening algorithm in c905 is to basic for my taste. I make sharpening in Adobe lightroom and I use different sharpening for outdoor image than for indoor image than for portrait. With adobe lightroom you can also avoid sharpening noise which came with ISO200. For example if you set:
Amount-50
radius-1,2
detail-17
masking-85
only edges will be sharpened leaving iso noise untouched.
[ This Message was edited by: igica11 on 2009-09-18 10:54 ]
Posted by igica11
On 2009-09-18 09:45:28, dark_axl21 wrote:
errm guys i got a noob question but how do you access the manual iso settting with the DM's new 3.2 cam driver?
I installed the dat. and lng. file in the iso folder but i can't seem to find the setting part
I don't seem to have this part...
[ This Message was edited by: dark_axl21 on 2009-09-18 08:49 ]
Maybe lng.file was written for english language and you are using different language in C905
Posted by dark_axl21
Nop i'm using english as well...
the original file in the 'ISO' folder was english right?
Posted by igica11
Comparasion between shutter speed 1/60 an 1/120
I cant see any disantvantages of usin 1/60 in this comparasion(for example to see blur).
Note that difference in my comparasion is bigger because objects was not close to flash and in room was a lot of daylight. If i took picture in totally dark room differece wouldnt be so big. If i took picture of person in large illuminated hall difference would be again big because shutter speed 1/60 would expose the ambient light more properly for objects out of reach of the flash.
And note that I set sharpnes to 0 because i edit sharpnes in Lightroom.
Comparasion in full size:
http://www.mediafire.com/?zjgzjyzykmh
http://www.mediafire.com/?wxzzj2mbdjn
[ This Message was edited by: igica11 on 2009-09-18 23:47 ]
Posted by daviep
dark_axl21-did you put the en.lng file in the right folder,it doesnt go along with the cam driver,put it in tpa/preset/system/language.
Posted by dark_axl21
On 2009-09-18 15:56:52, daviep wrote:
dark_axl21-did you put the en.lng file in the right folder,it doesnt go along with the cam driver,put it in tpa/preset/system/language.
yup exactly the place u mention...
Posted by rajac
On 2009-09-18 04:09:18, eltoffer wrote:
in fact it is miliseconds delay, and its also known as SLOW SYNCHRO and it keeps subjects and distance background bright
example
Normal Flash
Slow synchro on flash
DSC-W290?
Posted by eltoffer
yep, as you can see we are so far to have a nice night shot :S its all about lens and sensor anyway it is still a phone
Posted by zagi988
How do I install the driver? I download it,and now what???
Posted by mauasca
Try to read the 3D
find answers ^ _ ^
Posted by Bryan84
On 2009-09-20 18:08:57, zagi988 wrote:
How do I install the driver? I download it,and now what???
You need to use A2Uploader. You can find a tutorial here:
http://www.akshayy.com/sonyer[....]ials/a2uploader-tutorialguide/
Posted by zagi988
Can anyone explain to me which function is replaced with wich modified function in ElToffer 3.7 driver? i really need that. sorry for bad english,i am from croatia.
Posted by zagi988
Anybody? How can i edit ISO values in 3.7 driver? I would like to have biggest ISO posible,becuse i need it.
Posted by mikely_28
What do U mean? U need ISO 800 or 1600??? Trust the pictures will look awful at this ISO.
Posted by zagi988
On 2009-09-21 23:31:39, mikely_28 wrote:
What do U mean? U need ISO 800 or 1600??? Trust the pictures will look awful at this ISO.
I need ISO 800 or just a bit less. Can anybody give me a list of changed functions?
Posted by DarKMaGiCiaN
Darkmagician 3.2 will be available soon ...
Posted by DarKMaGiCiaN
Hi again all
time to release the new driver
DM 3.5
first I want to thank anouk82 for his time in testing the driver ^_^
what is SP in 3.5
-------------------------
edited the daylight selection under WB to be Color Correction (( worm color ))
for users who want to change the EFFECT with ISO please upload the driver and lng files which are in ISO folder to the phone ( EFFECT will be change to ISO ) and to enable Color Correction select Color Correction under WB list
for who want to use the Effect and dont care about the ISO then just upload the camera driver which is in effect folder to enable the Color Correction select Dayligh from WB list
download
http://www.2shared.com/file/7966965/4a8a929b/DM35.html
Posted by przemek505
DM great job driver is very nice. I have a question can you make driver that can record video in higher resolution that 320x240. In driver CYBERSHOT XPERIENCE 4.1 this resolution is 352 x 288 but that camdriver don't make good pictures
.[ This Message was edited by: przemek505 on 2009-09-22 09:50 ]
Posted by mikely_28
Take videos in night mode. Propably there is implemented CIF resolution.
Posted by Bryan84
elToffer 3.8 - Landscape Mode
Posted by zagi988
I am still waiting list of eltoffer 3.7 changed functions...anybody?? PLEASE! i need that...
Posted by mauasca
DM 3.5
Auto Flash Red-eye on total darkness
macro Flash Red-eye on total darkness
Is fantastic...........
the color is magic
[ This Message was edited by: mauasca on 2009-09-22 17:18 ]
Posted by rajac
On 2009-09-22 10:19:11, DarKMaGiCiaN wrote:
Hi again all
time to release the new driver
DM 3.5
first I want to thank anouk82 for his time in testing the driver ^_^
what is SP in 3.5
-------------------------
edited the daylight selection under WB to be Color Correction (( worm color ))
for users who want to change the EFFECT with ISO please upload the driver and lng files which are in ISO folder to the phone ( EFFECT will be change to ISO ) and to enable Color Correction select Color Correction under WB list
for who want to use the Effect and dont care about the ISO then just upload the camera driver which is in effect folder to enable the Color Correction select Dayligh from WB list
download
http://www.2shared.com/file/7966965/4a8a929b/DM35.html
Great job,DM.But...only a little difference from 3.2?
Posted by rajac
On 2009-09-22 18:14:33, mauasca wrote:
DM 3.5
Auto Flash Red-eye on total darkness
macro Flash Red-eye on total darkness
Is fantastic...........
the color is magic
[ This Message was edited by: mauasca on 2009-09-22 17:18 ]
sorry,I can't see your pics...But I think they may be good...
Posted by mikely_28
On 2009-09-22 16:34:22, zagi988 wrote:
I am still waiting list of eltoffer 3.7 changed functions...anybody?? PLEASE! i need that...
Changed Functions???
U mean where is located manual ISO? If so... In Effects menu:
AUTO
ISO 100
ISO 200
ISO 320
ISO 400
Next time read the tread M8. It was on page 78.
If U want a list of changes Toffer made pls send him a PM or ... read the tread
Posted by zagi988
On 2009-09-22 19:05:00, mikely_28 wrote:
On 2009-09-22 16:34:22, zagi988 wrote:
I am still waiting list of eltoffer 3.7 changed functions...anybody?? PLEASE! i need that...
Changed Functions???
U mean where is located manual ISO? If so... In Effects menu:
AUTO
ISO 100
ISO 200
ISO 320
ISO 400
Next time read the tread M8. It was on page 78.
If U want a list of changes Toffer made pls send him a PM or ... read the tread
I readed the whole topic,page by page. Thank you for that ISO information. But i want to know wich original function is changed with wich modified function. Like for that ISO,i need other functions where they are located. Sorry for bad english,i am only 15.
Posted by mikely_28
There is no other functions implemented to camdriver.
There are a lot of changes in camdriver like better sharpness, better colours etc.
Posted by anouk82
DM 3.5
Posted by anouk82
DM 3.5
Posted by anouk82
DM 3.5
Posted by anouk82
DM 3.5