Posted by butiliero
Why not using the flash?
Posted by kuttannetti
On 2008-08-15 16:20:04, butiliero wrote:
Why not using the flash?
flash may light the drops so bright that everything gets too shiny. any way without using the flash?
Posted by Raiderski
flash may light the drops so bright that everything gets too shiny
you don't have to worry about this, water drop is not too fast. quick example: macro on, manual shutter 1/640s and forced flash
higher shutter speeds can give you more "dramatic" effects and improve brightness
all
I will answer on posts today/tomorrow. sorry for absence
Posted by dj516nadz
raiderski is that ssF or ssS and is that ff on RER and macro not infinite
Posted by jokamaciek
demion U R genius
| Code: |
;K800i R8BF003 |
Posted by VILLA21
yeahh! Thanks @Joma!! I guess i have to remove the Gfx graphics.
Posted by jokamaciek
I'm not Jomateixa
Posted by VILLA21
On 2008-08-15 23:18:51, jokamaciek wrote:
I'm not Jomateixa
Shit! my bad
Posted by carth
can someone fix d osd that has hungarian ang english version coz some functions are jumbled...tnx in advance
Posted by michaloss
I made patch for k810 R8BA024. It looks that:
I use png files from this forum. Here is a link:
http://www.4shared.com/file/5[....]patch_raider_by_michaloss.html
Posted by Raiderski
recl
can you please add the red light in document mode for better focusing?
are you using document scene for anything else than text? if yes then I can't because this light often overbright text and make proper focus improssible. I'm trying to avoid this overbright effect, if results will be good then I'll enabled light in document scene
norbi_nw
is it X230 or X530 ??
Crystal clear sound
Crystal clear sound
X530 of course
kuttannetti
When I use higher shutter speed for indoor photography, the photos are so dark that i cannot see anything in the photo (despite using higher iso). Any solution for that?
you must use lower shutter speeds (with or without flash) because it's the only way to catch more light
dj516nadz
all of my pics are size of 400kb 500kb only a few 600kb i can not get now where to 800/900kb
image quality in camera menu is not fine but normal? check this out because 400kb is too low for fine settings
is that ssF or ssS and is that ff on RER and macro not infinite
it's 1/640s so it must be ssF, RER for forced flash and autofocus on macro mode (manual macro is not bad too in this case)
wickedsick
Haven't seen you in this mood for a long time How are things going on my friend?
sorry for absence but there was nothing interesting to show off
Posted by hfmls
sweet
have you played with more contrast and sharpness and tried to get exposure lowered? to check if that will work ok?
thank you.
Posted by dj516nadz
michaloss the driver u uploaded last week have u changed to values and options to match ur osd patch
Posted by vudu70
On 2008-08-16 10:24:21, carth wrote:
can someone fix d osd that has hungarian ang english version coz some functions are jumbled...tnx in advance
You'd do well to customize driver according to OSD.
Posted by filiptc
On 2008-08-16 10:24:21, carth wrote:
can someone fix d osd that has hungarian ang english version coz some functions are jumbled...tnx in advance
That version was specific to a request made. As vudu70 said, modify the camdriver file with notepad and re-'jumble' the function order accordingly. If there was a OSD for every particular sequence, this thread would fill with patches. I'd recommend using the patch provided by demion anyways (p.87).
Posted by dj516nadz
quite a big bug with michloss osd or camdriver i turned my fone on and still tryin to start up been couple of mins now, can anyone confirm this
Posted by dj516nadz
michaloss ur files forced me to reflash my fone!!!!!!!!!!!!!!
Posted by dj516nadz
who has an awesome osd patch for k810 r8ba024, .vpk preferably with images. thanks in advance
Posted by michaloss
I have this osd in my phone and I haven't got any problems. It works good.
[ This Message was edited by: michaloss on 2008-08-17 16:48 ]
Posted by 640kenough
strange enough, coz i have problems with this patch to
it cannot be flashed w/o error
Posted by michaloss
I flashed this patch by jdflasher meybe you used se tool? Try jdflasher
Posted by 640kenough
nope, i use Jd Flasher too
[ This Message was edited by: 640kenough on 2008-08-18 10:08 ]
Posted by 640kenough
I've made a simple GFX patch that realizes idea of Rule of thirds.
The patch shows thirds-grid by pressing '0' button.
The grid replaces virtually useless help screen .
A lot of cameras have such a grid, so I think, this option can be effectively used in the mobile cameras too.
VKP patches for K810 R8BA024, K800 R1KG001 / R8BF003,
K790i R8BF003
Rule_of_Thirds_K790_R8BF003_v.1.1.vkp
Rule_of_Thirds_K800_R1KG001_v.1.1.vkp
Rule_of_Thirds_K800_R8BF003_v.1.1.vkp
Rule_of_Thirds_K810_R8BA024_v.1.1.vkp
Some information about Rule of thirds:
http://digital-photography-school.com/blog/rule-of-thirds/
http://en.wikipedia.org/wiki/Rule_of_thirds
http://www.digital-photograph[....]-photography-tutor-thirds.html
http://cp.c-ij.com/english/ph[....]composition/composition02.html
[ This Message was edited by: 640kenough on 2008-08-21 09:53 ]
Posted by Raiderski
640kenough
sweet idea
Posted by wickedsick
On 2008-08-18 09:16:42, Raiderski wrote:
640kenough
sweet idea
Thank you for your reply and I am waiting for your new lovely driver.
Posted by ptkstep
640kenough
patch rule of third for K790i R8BF003,please.
Posted by ptkstep
sorry for double post.
[ This Message was edited by: ptkstep on 2008-08-18 13:45 ]
Posted by 640kenough
ptkstep
enjoy
Rule_of_Thirds_K790_R8BF003_v.1.1.vkp
Posted by eddie2020
average of those photo how much kb?
Posted by czaki91
make this patch for k800 R8BF003 Plz
Posted by 640kenough
czaki91
here:
Rule_of_Thirds_K800_R8BF003_v.1.1.vkp
Posted by ptkstep
Thank you very much.
Posted by carth
does anyone have osd made for raiders 6.3.3... i patched my phone with michloss and it works but its still jumbled... or can anyone help to rejumble these patches...tnx again..am using k810 r8ba024.
Posted by carth
this is raiders default functions but those osd that i have tried doesn't match..
-2.0 | balance cyan - red
-1.7 | balance yellow - blue
-1.3 | balance orange - light blue
-1.0 | Custom White Balance
-0.7 | contrast
-0.3 | colors saturation
0.0 | focus
+0.3 | EV compensation
+0.7 | shutter speed fast
+1.0 | shutter speed slow
+1.3 | ISO
+1.7 | zoom
+2.0 | AE lock
Posted by carth
ahhh...ok.. i figured it out, i edited raiders cam driver to suit the osd..thnx to vudu and filiptc... i ddnt understand what u meant b4, i thought the patch was to be edited..hehe
Posted by s.k750
I Have The Patch For K810_R8BA024 ..
Thank You ,,,
Posted by s.k750
On 2008-08-14 22:54:49, demion wrote:
this s my patch fo k790 r8bf003
| Code: |
|
and EV bar
download http://www.fileshost.com/en/file/55779/rider633-zip.html
[ This Message was edited by: demion on 2008-08-14 22:35 ]
please ,
I Have Patch For K810_R8BA024 ,
Thank You ,
Posted by wickedsick
On 2008-08-19 04:21:00, ptkstep wrote:
Thank you very much.
Is it for CID52 or CID53?
Posted by 640kenough
Is it for CID52 or CID53?
it's for CID52
[ This Message was edited by: 640kenough on 2008-08-19 10:23 ]
Posted by milan91
You can't patch cid53
Posted by filiptc
On 2008-08-19 05:15:42, carth wrote:
does anyone have osd made for raiders 6.3.3... i patched my phone with michloss and it works but its still jumbled... or can anyone help to rejumble these patches...tnx again..am using k810 r8ba024.
Glad you figured it out in the end but for the record, my first & second osd version was originally for the default order:
On 2008-08-01 22:19:06, filiptc wrote:
New version with EM / SEM and the modified slow shutter values. I also modified some color coding. I tried to keep it as little dense as possible while adding the most possible info. Tell me what you think. Again, R8BA024 and remove previous patches.
Download .vkp (right click -> save as)
(Download .png images in .zip)
[ This Message was edited by: filiptc on 2008-08-01 21:22 ]
Posted by es99
auto+speed shutter
Posted by deadman4168
auto mode infinite focus...shutter 2s
Posted by hfmls
new driver coming out ?
Posted by fulger06
all pictures is Auto+CWB
Auto+SEM
manual focus+CWB
macro+CWB
auto+CWB
auto+EM-->(Callatis 2008)
Manual focus+CWB+color saturation+contrast+ss+macro activate
Posted by milan91
deadman4168, better to use slow SS
hfmls, new?? Why you want new camdriver??
This version is very good, raider put everything what he can, if you want more from camera buy new phone...
Posted by s.k750
I Have Patch For K810_R8BA024
Posted by hfmls
he said he was working in 6.4
the only thing i think it needs it's a revisions in contrast/exposure/sharpness..
to get balanced pics
Posted by Raiderski
there will be no changes in contrast and exposure in 6.4
sharpness and everything else you can change in very simple way. you can experiment in every light conditions and post results here
quick tips for contrast and exposure:
1. default vs. contrast 01
2. default vs. contrast 01 + exposure FF
quick tip for sharpness:
1. default sharpness for scene = 06
2. enabled macro mode = forced 08 (max)
use macro mode off/on as a switch between sharpness 06/08. try both values on photos and you should be able to see what kind of improvement can give 08 over 06
I don't understand where is the problem with sharpness? there is not enough pixels in 3.2MP to squeeze more sharpness. I really like K800 sharpness
Posted by michaloss
Raider what can i do with no sharpness that often appears in low light conditions when i take the picture?




