Posted by ros-mari
I have just received my w910 in golden white from ebay seller. It is amazingly beautiful and the slider seems even "hard", which I love.
I just need to input the spanish language.not available in davinci, any ideas where?wotan neither.
BY the way it is manufactured w0815.
How could I show you photos?
Posted by ros-mari
hi again, how can I add spanish to the w910?
Curently it has a HK version, of course, the R1EA033
Posted by SilveR.
davinciteam or totalgsm.
Ask crews which firmware is with Spanish Language pack.
Good luck
Posted by Rookwise
Flash it with davinci to western europe and you will have the spanish language installed.
This message was posted from a W910i
Posted by ros-mari
thanks for answering
in davinci I only find earlier software and with the "red" or "black" options.Is it OK to us eone of these or should I wait for a "white" version???
Thanks again Silver and Rookwise
[ This Message was edited by: ros-mari on 2008-05-06 17:53 ]
Posted by SilveR.
Well..
Mail them how it's, before u update.
You can always update via SEUS later to the latest Firmware..
R1EA030 is the latest for the W910 via SEUS.
Goodluck
Posted by ros-mari
I tried to update in SEUS abd it says I've got the latest and does not input Spanish.
I guesss I've got the latest HK version
Thanks for your support, good idea to mail them
Posted by Rookwise
There's no difference between the white,black or red software.I don't know why davinci do it this way.Its the same with the K850 as well.Just flash your phone with either colour Western European firmware,restart the phone without the sim or M2 inserted and allow the phone to fully load up until you get the Insert sim or they Demo prompt.Turn the phone off and remove the battery for 5 seconds then put it back in.Then reflash the phone with SEUS.Put you sim and M2 back into the phone before powering up and let the phone load up fully.Btw.I have 2 white W910's and the slide mech's are just as weak as the S500/W580 and also the W850.I also have the problem of the keypad flashing when on a call,calls cut out after 10 minutes and after 3 minutes when using a bluetooth headset,slow media player when playing music,speaker volume is random and quite a few others.This is only happening on one of the W910's though.
This message was posted from a W910i
Posted by Supa_Fly
On 2008-05-07 03:11:47, Rookwise wrote:
There's no difference between the white,black or red software.I don't know why davinci do it this way.Its the same with the K850 as well.Just flash your phone with either colour Western European firmware,restart the phone without the sim or M2 inserted and allow the phone to fully load up until you get the Insert sim or they Demo prompt.Turn the phone off and remove the battery for 5 seconds then put it back in.Then reflash the phone with SEUS.Put you sim and M2 back into the phone before powering up and let the phone load up fully.
Btw.I have 2 white W910's and the slide mech's are just as weak as the S500/W580 and also the W850.I also have the problem of the keypad flashing when on a call,calls cut out after 10 minutes and after 3 minutes when using a bluetooth headset,slow media player when playing music,speaker volume is random and quite a few others.This is only happening on one of the W910's though.
This message was posted from a W910i
I'd be careful with such a general statement. Its NOT the same with the K850i ... a few ppl tried flashing their blue K850i's with the Green firmware from DaVinci or elsewhere and their phone was bricked, salvageable, but bricked non-the-less! Not sure of the W910 but I think its something in the hardware for the K850i - again a guess & general summation here but you won't catch me EVER flashing GREEN firmware on my Blue K850i regardless of the customizations for my region.
Posted by jakontil
from what i've heard. between the blue and green K850i come different hardware component manufacturers, hence some say the green version feels a little heavier or vice versa, don't take my words for granted though, but it may be the same thing with W910i
Posted by Rookwise
Strange as i've not had any problem putting green or blue firmware on my Quicksilver Black edition K850 when i removed the O2 branding.Worked without any problems.Have also flashed an Orange branded green K850 with Blue firmware and all worked fine.
Posted by ros-mari
Well
I asked the Da Vinci group fpr help and they told me to flash it to one of the two ES possibilities-So I did.Now I have got Spanish!!!! and Catalan(my own language) but the software is 030.
Thanks for your support, I hope this firmware is good.
Posted by mrllcoolj
On 2008-05-07 19:07:00, Rookwise wrote:
Strange as i've not had any problem putting green or blue firmware on my Quicksilver Black edition K850 when i removed the O2 branding.Worked without any problems.Have also flashed an Orange branded green K850 with Blue firmware and all worked fine.
Just out of interest, how have you flashed your phone or debranded your phone? many thanks
Posted by Rookwise
Go to the Davinciteam website and there's a pdf that you can download with instructions on how to flash your phone.
This message was posted from a W910i
Posted by single_luis
Oh! by GOD .... that beautiful team takes. ami although I like most in black
_________________
[ This Message was edited by: single_luis on 2008-05-08 15:45 ]
Posted by mrllcoolj
hi rookwise, yeah i had a look at it but is there any other way of doing this without spending 50 euros (£40)??