Posted by wolfboy21
Hi there.
Has anybody had any dealings with the WotanServer organisation lately?
I sent 7 euros to their paypal account requesting a credit and an account on Wednesday and haven't heard a thing.
Just a little concerned as I really need to get this K800i up and running ASAP.
Thanks.
Posted by thegreatone
i have a dealing with them a couple weeks ago brought 2 credits of them try to de-brand my w900 both times fail to finalized used my credits up without success email them many time but still waiting for a response will not use them again you normally get your credit straight away
Posted by wolfboy21
How long did it take you to get the credits?
All I need is a user name and password.
I'm only trying to repair the EROM lol!
Posted by thegreatone
you get it straight away as soon as your payment is confirm,they will send you a password and a username
Posted by wolfboy21
Well, they have recieved it soo my paypal account says.
Posted by gaming_guy
when i 1st used wotanserver, i got the username and password straight away.
that was the only time i used wotanserver because i then found XS++ which allows you to flash phones for free
Posted by aremaboy
WotanServer is dead already. It's service is very very bad now. It used to be the best in the past, but now?
Posted by wolfboy21
I still have no details etc.
Who do I get in touch with?
I only need to re-flash the EROM!
Posted by thegreatone
goto get support and email them i will be very surprised if you get a response
Posted by wolfboy21
So basically I've chucked a fiver away?
Posted by thegreatone
yeah i m £10 down and a mess up w900
_________________
5 times european champions priceless,there are something money can't buy,for everything else there is always chelsea
[ This Message was edited by: thegreatone on 2008-03-22 11:02 ]
Posted by wolfboy21
Great stuff.
I need to get this K800i up an running as I have had to give my mate my N95........and i'm missing it haha.
Can anybody point me in the direction of an EROM for the K800? I'm getting impatient looking at this bricked phone haha
Posted by thegreatone
have you try seus to reflash it?it may work
Posted by wolfboy21
It recognises the phone but then immediately fails when the upgrade process starts.
Posted by thegreatone
sorry to hear about that only other suggestion is try Devinci i haven't use them but other member may have
Posted by wolfboy21
Yes I wish I had gone with them first.
How much are the credits with davinci?
It's frustrating as I didn't actually need to buy a credit for Wotan. All I need off them is a username and password!
Posted by thegreatone
here is their website if it helps
http://www.davinciteam.co.uk/index.html
Posted by aremaboy
Download KulanKendi Client from www.kulankendi.com . Use username kulan and password kendi. Tick EROM update on the client. Instal USB Flash Driver first. Hold 2 and 5 together, plug in DCU-60 and see whether it works. Just try it and good luck.
Posted by wolfboy21
Kulan doesn't work.
Phone Connected...
Detected: DB2020: A1 Series
Error: EROM CL Wrong Response!
Posted by gaming_guy
try and get a log from XS++ or setool2lite and post it up here
Posted by wolfboy21
11:52:34| Baseband ID: 9900
11:52:34| DB2020
11:52:34| Protocol Version: 3.1
11:52:34| Phone name detected!
11:52:34|
11:52:34| Profiling SEMC phone...
11:52:34| Baseband ID: DB2020
11:52:34| OTP CID: 49
11:52:34| EROM CID: 52
11:52:34| EROM Color: Red
11:52:34| IMEI: 35399601xxxxxx
11:52:34| Phone ID: K800
11:52:34| Network: HUTCH_1
11:52:34| CDA: CDA102511/69 R19A
11:52:34| Firmware Version: R1JE001
11:52:34| EROM: R3A016
11:52:34| Ready for operation!
Posted by gaming_guy
On 2008-03-22 12:52:50, wolfboy21 wrote:
11:52:34| Baseband ID: 9900
11:52:34| DB2020
11:52:34| Protocol Version: 3.1
11:52:34| Phone name detected!
11:52:34|
11:52:34| Profiling SEMC phone...
11:52:34| Baseband ID: DB2020
11:52:34| OTP CID: 49
11:52:34| EROM CID: 52
11:52:34| EROM Color: Red
11:52:34| IMEI: 35399601xxxxxx
11:52:34| Phone ID: K800
11:52:34| Network: HUTCH_1
11:52:34| CDA: CDA102511/69 R19A
11:52:34| Firmware Version: R1JE001
11:52:34| EROM: R3A016
11:52:34| Ready for operation!
looks fine to me, it may just need the main firmware reflashing
Posted by wolfboy21
Thats the annoying thing about it.
It does look fine until you try and flash it and then it fails half way through on setool and on XS.
Posted by gaming_guy
is the battery over 85% charged?
Posted by wolfboy21
85% i'm not sure.
MY mate said it was charged when he gave it me.
Will a K810 battery fit the K800??
Posted by gaming_guy
On 2008-03-22 13:01:13, wolfboy21 wrote:
85% i'm not sure.
MY mate said it was charged when he gave it me.
Will a K810 battery fit the K800??
yep done it plenty of times with my k800 and k810
Posted by wolfboy21
Great stuff, I'll get my mate to lend me his battery haha.
Posted by wolfboy21
If it is due to the battery I will have to slap him because he swears blind that he fully charged it last time he used it haha.
Posted by gaming_guy
On 2008-03-22 13:09:00, wolfboy21 wrote:
he swears blind that he fully charged it last time he used it haha.
last time could mean a few days ago or a few months or even a year or so!
anyway, i hope you can get this sorted
Posted by wolfboy21
Do you guys recommend a certain custom pack for firmware R1KG001.
Cheers
Posted by wolfboy21
Davinci won't recognise it with a full battery
[ This Message was edited by: wolfboy21 on 2008-03-22 15:31 ]
Posted by gaming_guy
On 2008-03-22 16:31:03, wolfboy21 wrote:
Davinci won't recognise it with a full battery
[ This Message was edited by: wolfboy21 on 2008-03-22 15:31 ]
what about xs++?
Posted by wolfboy21
Ok, left the battery out for 15 mins and gave davinci a go.
IM Lock Staus: LOCKED
Identification Time - 00:00:32
Done!
Service Selection Started...
Getting Conversion Script From Server For: K800i / CID52 / Red...
SELECTED: Conversion For K800i To
Script Execution Started...
Checking Files...
Downloaded 62Kb In 1 sec
Downloaded 62Kb In 1 sec
Downloaded 62Kb In 1 sec
Starting up...
Script initialization. Please wait...
Disconnect The Phone, Reinsert Battery And Connect Again Holding 2+5 Keys...
Connected!
SEMCUSB 2+5 Mode Detected.
It gets to the above and just hangs. I'm trying to do an EROM update.
Posted by thegreatone
just a thought have you checked your junk mail to see if they posted your login and password there?
Posted by wolfboy21
Yes nothing there i'm afraid.
What an earth is up with this thing
Posted by wolfboy21
Davinci still won't work, it just hangs on awaiting phone answer when trying to do an EROM update.
Is it the GDFS?
Posted by gaming_guy
On 2008-03-24 13:37:36, wolfboy21 wrote:
Davinci still won't work, it just hangs on awaiting phone answer when trying to do an EROM update.
Is it the GDFS?
have you tried pressing 2&5 (doesnt work with xs++, it hangs even on a fully working phone) instead of 'c'?
otherwise have you got a service cable?
Posted by wolfboy21
It gets upto the remove usb cable,remove battery,then re-insert battery and cable pressing 2+5.
I hold 2+5 and then it hangs on "waiting phone answer".
It's weird, one minute the computer cannot recognise the phone so I have to pop the battery out and leave it for a bit.
It'll then recognise it.
No, I don't have a service cable i'm afraid.
Posted by wolfboy21
On 2008-03-24 13:50:25, gaming_guy wrote:
On 2008-03-24 13:37:36, wolfboy21 wrote:
Davinci still won't work, it just hangs on awaiting phone answer when trying to do an EROM update.
Is it the GDFS?
have you tried pressing 2&5 (doesnt work with xs++, it hangs even on a fully working phone) instead of 'c'?
otherwise have you got a service cable?
I have just tried connecting to Davinci using 2+5 and I get the following :-
(#) DaVinci Service Client v22.35
New device connected on USBF3
Device Identification Started...
Checking Files...
SEMCUSB 2+5 Mode Detected. Use This Mode For Recovery Only!
Then at the bottom "waiting phone answer".
Soo annoying this is!!
Posted by wolfboy21
Tried to flash the main using SETool :-
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3539 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:254 secs.
[ This Message was edited by: wolfboy21 on 2008-03-24 14:13 ]
Posted by totalgsm
which phone are you trying to fix?
_________________
Visit http://www.totalgsm.org for unlocking and debranding services. New Competition on forum and Sports talk
[ This Message was edited by: totalgsm on 2008-03-24 14:18 ]
Posted by gaming_guy
right, if that doesnt work either:
1. get setool2lite 1.11 and drag the main onto qamaker.exe (in the setool directory). you will then have a quick access vkp patch. this method will take around 15 mins to complete
Load up the software and change the Phone Type to K800.
In the big box on the right (Files area), click on Add and select the MAIN file.
Now, in the MISC files area, browse to the VKP file that was created before ...
Now click on the FLASH button
Connect the phone as per usual by taking out the SIM card, then the battery. Re-insert the battery and whilst holding down C button on the phone, connect it to the USB cable (other side of it should already be plugged into your computer).
Flashing will begin. After a while, it will ask you to remove the cable, remove the battery, re-insert battery, click READY and then re-connect it to the USB cable whilst holding down the C button.
Again, after another while, it will ask you about the script file, just click on the NO button to apply.
After a couple of minutes, it will be completed and you can disconnect the phone from the USB cable. (the program will look like its not doing anything, WAIT UNTIL YOU SEE 'ELAPSED XXX SECONDS' then it is safe to unplug the phone)
(taken from here)
or
2. get/borrow a service cable and attempt the flash again
Posted by wolfboy21
On 2008-03-24 15:17:06, totalgsm wrote:
which phone are you trying to fix?
_________________
Visit http://www.totalgsm.org for unlocking and debranding services. New Competition on forum and Sports talk
[ This Message was edited by: totalgsm on 2008-03-24 14:18 ]
SE K800i (3 UK)
Posted by wolfboy21
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3539 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:\\Documents and Settings\\Chris\\Desktop\\k800\\K800_R1KG001_MAIN_GENERIC_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
verify block error
last blk:449C0000,00010000
Elapsed:125 secs.
It didn't work i'm afraid guys. The USB disconnect noise was sounded and it paused. DOH!
Posted by wolfboy21
I take it I need a service cable then?
Posted by gaming_guy
you can try one, but im not sure if it will work though.
Posted by wolfboy21
What do you reckon is up with the phone?
Posted by wolfboy21
Hi there.
Well i've still got this bricked k800i. It decides to connect to my PC when it feels now. Earlier my pc came up with "new device found - Sony Ericsson Flash Device" but now the pc can't find it at all.
I'm thinking about shorting the phones battery terminals out.
Any advice on how to do this?
Thanks.