Posted by Chucklz_k800
I updated the firmware on my K800i and now the flash dont work on the camera, any ideas why, thanks for your help.
Posted by Chucklz_k800
Bump, anyone have any ideas, also can i flash custom camera drivers to my fone?
Posted by tranced
this is weird. do you have any settings on? what setting are you using?
Posted by Chucklz_k800
i have the flash set to auto, and the main camera setting set to auto. Everything worked fine before i upgraded my firmware and now the flash just wont work, my firmware is R1KG001, is there anyway i can use an ealrier firmware or flash a custom camera driver. thnaks for your help.
Posted by Coquito
test the flash on service menu to see if is a hardware problem.
Posted by Chucklz_k800
which part in the service menu i have gone into service tests and theres an option to test camera but no option to test the flash.
Posted by zaxan
Under the service menu the option to test the flash is called 'Discharge flash' which I believe is as the very top of the list in the service tests. If you select this and the flash does work it proves it is not a hardware problem.
Also just check again that the flash is set to auto, and you are not in any scene modes just to make sure it is not a camera setting which is stopping the flash.
Hope this helps
[ This Message was edited by: zaxan on 2008-02-10 12:07 ]
Posted by Chucklz_k800
the flash didnt work, does this mean that it is hardware problem, as before i updated the firmware it did work
Posted by thefalken
Try taking it off auto mode, and into 'always use' ?
Posted by Chucklz_k800
hit there isnt an always use mode
Posted by Chucklz_k800
still have the problem are there any solutions?
Posted by tranced
try to flash it again
Posted by Chucklz_k800
i have but it remains the same, do you know where i can get an earlier firmware to flash with XS++
Posted by tranced
cybershot.4shared.com