Posted by sacirxposed
Realy, great pictures
Posted by xGothico
Nice pictures...I think I should test this driver
_________________
http://www.flickr.com/photos/28152364@N02/
[ This Message was edited by: xGothico on 2008-07-07 18:56 ]
Posted by hfmls
why 2.46? what's the difference ?
answer pls.
[ This Message was edited by: hfmls on 2008-07-07 22:30 ]
Posted by frankthetank
With photos of that standard, you should definitely enter the monthly photo competition, especially considering this month's theme....
http://www.esato.com/board/viewtopic.php?topic=172164
Posted by nimman007
my pics
Posted by decay_zeit
hello there...
well after a while being away of modding,now it seems that camdrivers have really something to say,something serious..
cuz a few months ago,modded camera drivers did not really make any difference and sometimes they were really tribble,in my opinion ofcourse,i've used many of them and they all disappointed me(in overal),if you don't mind especially Ultimate Withan v2.44,it produced lots and lots of noise in my case...
but now after months that i've been using N1's 2.9 now i'm back into modding again and what i see???? wow
this Withan v3 rocks!it really makes the difference,i can't believe how perfect my pictures are...
THANK YOU JOMA....
it's been a week i'm trying to master this camdriver,it's EASY to get used to and is APPROPRIATE for almost every situation..gradually i'm getting addicted to this driver and day after day i manage to shoot better shots...slow flash sync nearly killed me:D i love using this mode...
but one thing really weird got stuffed into my bottom,and that's :
Twilight Landscape,Withan V3 R1
the picture is eyecatching,but notice this-->
this is the sky cropped :
you see those little stupid noise all over the sky??? they are not stars for sure
those little white dots are visible in all twilight landscape pictures taken with Withanv.3..i tried to manually change every single factor but the noise is still there.
now look at this :
Original camdriver,Twilight landscape
as you see the picture is CLEAR,no noise at all...i've got lots of such comparisions,this means that original camdriver still produces less noise...
on the other hand i haven't tried Raidersky's SM driver yet,may be that driver could overally satisfy me even better...
last word,I REALLY APPRECIATE YOUR WORK BUDDIES,THANK YOU and KEEP UP THE GOOD WORK
Posted by decay_zeit
hello Joma
i need your help here...could you please help on how to remove AutoFocus LED in document mode????
it bothers me a lot as i use document mode often,for example i'm trying to shoot my brother's nose while he's asleep,that stupic red light wakes him up...this applies to insects etc. as well...on the other hand while focusing on a document,LED returns a strong red light and the camera can hardly focus...after all i see NO need to that red light in document mode...thanks in advance
Posted by ssnopyybg
On 2008-07-13 12:08:48, decay_zeit wrote:
hello Joma
i need your help here...could you please help on how to remove AutoFocus LED in document mode????
it bothers me a lot as i use document mode often,for example i'm trying to shoot my brother's nose while he's asleep,that stupic red light wakes him up...this applies to insects etc. as well...on the other hand while focusing on a document,LED returns a strong red light and the camera can hardly focus...after all i see NO need to that red light in document mode...thanks in advance
Posted by milan91
af assist lamp is good only for very very dark situations
Posted by decay_zeit
if it is too dark i simply can switch to Auto mode + Macro using red LED...but in document mode it's really a pain to have that red light.
Posted by milan91
Yea
Try raiderski camdriver
Posted by jeff89
i am new here anyone can tell me how i can install the cam driver in my k810?
Posted by jhayms
On 2008-07-14 08:46:30, jeff89 wrote:
i am new here anyone can tell me how i can install the cam driver in my k810?
if your mobile is CID52 you could use xs++, check these threads http://www.esato.com/board/viewtopic.php?topic=159658
you could check xs++ 3.1 here and tutorial http://forums.se-nse.net/index.php?showtopic=16338
http://forums.se-nse.net/index.php?showtopic=23459
for CID53, use jdflasher, dl here http://manndaar.wordpress.com/download/software/
tutorial>> http://forums.se-nse.net/index.php?showtopic=23228
SEMC flash drivers
http://www.snapdrive.net/file[....]%27%27USBFlashDriver_vista.rar
http://www.snapdrive.net/files/459684/USBFlashDriver.rar
Posted by frankthetank
@decay_zeit
I think you will find it is dust on the inside of the lens cover of the phone that is causing your spotty problem. It will be exacerbated by long exposure times...
Posted by sacirxposed
What's happened with Jomma and his camdrivers???? Jomma are you there????
Posted by hfmls
where can i see the changelog and settings for 2.46 ?
Posted by unforgiven_sh
On 2008-07-21 01:05:30, hfmls wrote:
where can i see the changelog and settings for 2.46 ?
where can i see the changelog and settings for 2.46 ?
here: http://www.esato.com/board/viewtopic.php?topic=161414&start=0
Posted by hfmls
where man? :S are the "menus" the same? red eye for party, etc?
pls answer
Posted by unforgiven_sh
you have the full changelog on the first page of this topic, in the first post
Posted by matthew23
withan v3r1
Posted by stürmer
pls update this wonderfull driver jomateixa PLS!
Posted by unforgiven_sh
On 2008-07-21 18:56:13, stürmer wrote:
pls update this wonderfull driver jomateixa PLS!
pls update this wonderfull driver jomateixa PLS!
whats wrong with it?
Posted by hfmls
i mean 2.46
Posted by stürmer
its getting older...and raiders makes better results
Posted by unforgiven_sh
On 2008-07-21 22:11:22, stürmer wrote:
its getting older...and raiders makes better results
its getting older...and raiders makes better results
if you think so use raider camdriver
Posted by Guto_ViP
On 2008-07-21 20:32:36, hfmls wrote:
i mean 2.46
Go on se4u.4shared.com
Posted by claypot
current driver is still the best! been using it for months now =)
Posted by decay_zeit
On 2008-07-20 11:09:46, frankthetank wrote:
@decay_zeit
I think you will find it is dust on the inside of the lens cover of the phone that is causing your spotty problem. It will be exacerbated by long exposure times...
hello buddy,thanks for your reply,but...
i don't think so,because spotts are seen only in the sky,i mean on a specific color or lighting.on the other hand i've never opened the casing,how is dust supposed to go inside???
and yes i know It'll be exacerbated by long exposure times... but isn't Twilight Landscape mode supposed to have long exposure times??????
Posted by hfmls
well driver 2.46 i downloaded the .rar but there's no nfo telling me wich settings are wich. iso, shutter speed,etc
Posted by tphg
On 2008-07-22 20:21:46, hfmls wrote:
well driver 2.46 i downloaded the .rar but there's no nfo telling me wich settings are wich. iso, shutter speed,etc
Yes, i'm also looking for instruction for 2.46, but could not find it. Grateful if jomateixa or someone can help.
Posted by Guto_ViP
- Ultimate v2.6 Standard™
- Ultimate v2.6 VividColour™
- Ultimate v2.6 Withan™
··· SPECIAL MODES ···
* Auto scene:
1) Flash AUTO: Daylight flash special mode I. Forced flash. (1/6400s, ISO 250)
2) Flash AUTO + MACRO: Daylight flash special mode II. Forced flash. (1/6400s, ISO 100)
3) Flash RER: Party mode I. Flash not forced. (1/30s, ISO 320)
* Twilight portrait scene:
1) Flash AUTO: Slow flash sync mode I (1s, ISO 160). You can use it for macros too.
2) Flash RER: Party mode II. Flash not forced. (1/8s, ISO 320)
* Portrait scene:
1) Flash AUTO: Slow flash sync mode II (2s, ISO 100). You can use it for macros too.
2) Flash RER: Party mode III. Flash not forced. (1/2s, ISO 250)
3) Flash OFF: Indoor special mode. (1/6s, ISO 800 minimal)
--------------------------------------
- Ultimate v2.46 Standard™
- Ultimate v2.46 VividColour™
- Ultimate v2.46 Withan™
+ Auto mode + Red Eye Reduction flash is now the real Party mode with 1/30s exposure. When flash is setted to Auto, it is 1/250s for daylight flash pics (FF).
+ Reduced colour in Twilight landscape mode to get less noisy pics at some situations like sunshine or sunrise.
---------------------------------------
- Ultimate v2.44 Standard™
- Ultimate v2.44 VividColour™
- Ultimate v2.44 Withan™
ˇNew! v2.44
> Auto mode + macro setted has xenon ISO 100 (thanks to Raiderski for the idea)
> Portrait has tungsten WB by default like Twilight portrait (but only applied when flash needed, on both). This is to reduce the yellow/red background introduced by long exposure in slow sync pics
------------------------------------
-Ultimate v2.41 Standard™
-Ultimate v2.41 VividColour™
-Ultimate v2.41 Withan™
New! v2.41
- Standard and Withan versions have colour 01 in flash pics to compensate contrast 01 setting (VividColour remains the same)
- In Twilight landscape mode, sharpness is reduced to 02
---------------------------------------------
-Ultimate v2.39 Standard™
-Ultimate v2.39 VividColour™
-Ultimate v2.39 Withan™
ˇNew! v2.39
- Fixed indoor special mode (now really 6 fps, before was 5)
- Flash RER not forced
- In all pics with flash contrast is increased 01
- Doc mode has sharpness 08
------------------------------------
-Ultimate v2.35 Standard™
-Ultimate v2.35 VividColour™
-Ultimate v2.35 Withan™
ˇNew! v2.35
- Added indoor special mode to Portrait scene (6 fps shutter). Now we have a mode for less noisy indoor pics, but with slow AF of course (with the help from Raiderski, thanks!)
----------------------------------
-Ultimate v2.3 Standard™
-Ultimate v2.3 VividColour™
-Ultimate v2.3 Withan™
- Fixed compression, it will not crash anymore (I expect... )
- Auto mode flash pics have 1/80s exposure (it's OK for the most flash pics at day & night, but if too dark you can use 1/2s slow sync mode)
---------------------------------
- Ultimate camdriver v2.20
ˇNew! v2.20
- Added full range auto focus (from macro to infinite) to Portrait, Twilight portrait, Sports, and Beach/Snow scenes.
*What does it mean? It's not necessary to be in macro or document mode, simply focus the near object you want and voilŕ. The same for infinite objects.
Ultimate v2.20 Standard™
Ultimate v2.20 VividColour™
Ultimate v2.20 Withan™
v2.18
- Added another slow sync mode. Resume:
1) Twilight portrait scene: Slow sync flash with 1/2s exposure, xenon ISO 250 (this mode reduces noise drastically)
2) Portrait scene: Slow sync flash with 2s exposure, xenon ISO 125
3) Use Auto mode for common flash pics (1/30s)
*Tip: Slow flash sync mode is very useful for:
i) Making beautiful pics in movement using this technique (watch pic below as example)
ii) Amplify a lot the background light on static flash pics
v2.16
- Twilight portrait mode has Slow Flash Sync: 1/2s exposure time and xenon ISO 250
- All other flash pics have 1/30s exposure time and xenon ISO 320
------------------------------------------------------
- Ultimate camdriver 2.11
There's 3 different flavours:
* Standard™ ~~~> No colour gain implemented (stock default)
* VividColour™ ~> Colour gain to insanity (0b)
* Withan™ ~~~~> High colours only when flash off (less noise on flash pics)
ˇNew! v2.11
- Fixed the "Document mode first pic with bad ISO" bug (forced flash implemented in another way)
- Added another flavour of the Ultimate Driver: Withan™ ("Where is tha' noise?") . In Withan™ colour is increased only on pics without flash. Also has 00 (Auto) mode in Twilight portrait, instead of 03 (Party).
Posted by frankthetank
On 2008-07-22 14:25:16, decay_zeit wrote:
On 2008-07-20 11:09:46, frankthetank wrote:
@decay_zeit
I think you will find it is dust on the inside of the lens cover of the phone that is causing your spotty problem. It will be exacerbated by long exposure times...
hello buddy,thanks for your reply,but...
i don't think so,because spotts are seen only in the sky,i mean on a specific color or lighting.on the other hand i've never opened the casing,how is dust supposed to go inside???
and yes i know It'll be exacerbated by long exposure times... but isn't Twilight Landscape mode supposed to have long exposure times??????
Do the spots appear in the same place in every photo? Do a run of them to compare... I have similar issues and to be honest any camera that lives in a pocket is bound to have dust in the case so I don't blame the hardware or the driver for that matter
Posted by tphg
Thanks Guto VIP, but this is only change log, not instruction.
How to get 2s shutter speed in 2.46 for twilight lanscape?
Posted by frankthetank
On 2008-07-22 14:25:16, decay_zeit wrote:
On 2008-07-20 11:09:46, frankthetank wrote:
@decay_zeit
I think you will find it is dust on the inside of the lens cover of the phone that is causing your spotty problem. It will be exacerbated by long exposure times...
hello buddy,thanks for your reply,but...
i don't think so,because spotts are seen only in the sky,i mean on a specific color or lighting.on the other hand i've never opened the casing,how is dust supposed to go inside???
and yes i know It'll be exacerbated by long exposure times... but isn't Twilight Landscape mode supposed to have long exposure times??????
Do the spots appear in the same place in every photo? Do a run of them to compare... I have similar issues and to be honest any camera that lives in a pocket is bound to have dust in the case so I don't blame the hardware or the driver for that matter
Posted by decay_zeit
On 2008-07-24 07:27:24, frankthetank wrote:
Do the spots appear in the same place in every photo? Do a run of them to compare... I have similar issues and to be honest any camera that lives in a pocket is bound to have dust in the case so I don't blame the hardware or the driver for that matter
not in the same place but in the low light and dark places
Posted by Guto_ViP
On 2008-07-24 06:53:14, tphg wrote:
Thanks Guto VIP, but this is only change log, not instruction.
How to get 2s shutter speed in 2.46 for twilight lanscape?
Sorry, but i have only this about theses old versions...
Posted by W900
jomateixa, can you make this driver go 30 fp or 35 fps in video?
Thanks.
Posted by haydeki
V3REV1
Posted by matthew23
v3r1 -
Posted by jokamaciek
jomateixa, can you make this driver go 30 fp or 35 fps in video?
Thanks.
do it on yoyr own.
Thanks.
| Code: |
seq_vf_config_23 = $s6 23 |
_________________
T300->T610->E398->K700->MPx200->3xK750->N70->K800 + PSP 2004 3.93 M33 + PS3 40GB
[ This Message was edited by: jokamaciek on 2008-07-29 15:40 ]
Posted by hfmls
mathew can you post the settings please?
Posted by jokamaciek
hfmls I don't think that he used something more than Macro ON because UCD is not a supermode
Posted by hfmls
yeah i know, i wanted to know wich "menu mode"
Posted by matthew23
yes jokamaciek is right, it was only auto scene+macro+rer+wb:daylight, nothing special
_________________
SE K810i R8BA024, acoustic - Peter´s v.2 HiFi, camera - Withan V3 rev.1, display - Centur´s v.4, modded menu
[ This Message was edited by: matthew23 on 2008-07-30 11:10 ]
Posted by Lohsl78
Posted by hfmls
nice and clear
Posted by hfmls
can u implement EM and SEM ?
Posted by vogodart
withan v3
Posted by tranced
awesome macros
Posted by phoenix1985
very nice driver.........