Posted by DeKosta
On 2008-01-15 21:05:26, jomateixa wrote:
On 2008-01-15 20:40:53, DeKosta wrote:
I think it's normal (not a bug on my driver) cause zoom remain locked at infinite. Anyone can test with other driver? Thanks
Does this go for "macro" also? If i go into normal scene, choose macro from the list and then go to, let say twilight portrait -
does the macro count to that scenen to? A little sharper pics?
If you select macro focus and then you change the mode to Twilight portrait the focus comes back to Auto (it doesn't remain locked like in infinite setting). But in the case it would remain locked you won't get sharper pic. Sharpness is 06 for all modes.
Allright, so is there any gaining to use Macro in auto-scene then?
Posted by jomateixa
On 2008-01-15 22:01:50, DeKosta wrote:
On 2008-01-15 21:05:26, jomateixa wrote:
On 2008-01-15 20:40:53, DeKosta wrote:
I think it's normal (not a bug on my driver) cause zoom remain locked at infinite. Anyone can test with other driver? Thanks
Does this go for "macro" also? If i go into normal scene, choose macro from the list and then go to, let say twilight portrait -
does the macro count to that scenen to? A little sharper pics?
If you select macro focus and then you change the mode to Twilight portrait the focus comes back to Auto (it doesn't remain locked like in infinite setting). But in the case it would remain locked you won't get sharper pic. Sharpness is 06 for all modes.
Allright, so is there any gaining to use Macro in auto-scene then?
The only function of Macro mode is to focus lower distances mate :S
Posted by ozzlss
hi guys!
sorry im new here and I bought a K790i and I would like to know how can I install this great patch
thx
Posted by theshadow03
this is not a patch..i`ts a camdriver..use XS++ and here somewhere you will find a tutorial how to upload the cam driver
Posted by ozzlss
i have the XS++ software, but I dont know how to use the cam driver.
There are 2 different cam drivers here, can I use both ?
Posted by theshadow03
On 2008-01-16 21:20:36, ozzlss wrote:
i have the XS++ software, but I dont know how to use the cam driver.
There are 2 different cam drivers here, can I use both ?
u have to use the camdriver0.dat
Posted by ozzlss
ok
but both are camdriver.
I can use only one : There are the standart and vivid...I can use only one ? thats it ?
But which option I need the select in the XS++ ?
Thx
Posted by ozzlss
I want to use the VIVID file, so there is 3 options:
FLASH MAIN FIRMWARE
FLASH FILE SYSTEM
CUSTMOMIZE
I think it is the Flash File option..it is correct ?
But below, there are some configs, like Settings, Flahs, FSX etc...Which one I select ?
Thank you very much
Posted by milan91
From number1....
xs++ 3.X
1.up zip ifs.zip
2. run xs++.exe
3. take out ur phone battery
4. press connect
5. put phone battery back in and plug ur phone into pc holding down C
6. click FSX
7. click start FSX
8. browse to ifs/settings/camera
9. click upload
10.now find my camdriver0.dat
11.double click it and it will upload and replace ur old camdriver0.dat
12.press shutdown then yes
13.press close and disconnect phone
Posted by ozzlss
Ok.
I did this! thx!
But, it says that the "FLASH IS ALWAYS ON". And here, its not..only when I take a picture.....Why ?
Thank You very much!!
Posted by milan91
You cant turn on xenon flash... Buy phone with LED flash and you can turn flash
Posted by DeKosta
The xenon-flash would burn up if you used it as some kind of flashlight, he he.
What it means is that the flash goes of even when you take pictures in bright conditions as it wouldnt do with original camdiver.
Posted by jomateixa
you can use Far Manager instead flashing, it's a lot faster
Posted by mindshifter
First of all I'd like to thank you for this driver. It's really good.
Could you implement manual focus in document mode (optional - not forced)?
And driver name in jpg metadata will be nice
Posted by mindshifter
About EXIF data - I've found this and this is what I want (posted by pietropizzi):
http://www.esato.com/board/viewtopic.php?topic=152275&start=2250
but it's seems that metadata can't be changed by camdriver
[ This Message was edited by: mindshifter on 2008-01-19 13:39 ]
Posted by jomateixa
On 2008-01-19 13:06:24, mindshifter wrote:
First of all I'd like to thank you for this driver. It's really good.
Could you implement manual focus in document mode (optional - not forced)?
And driver name in jpg metadata will be nice
Wait a couple of weeks for the new version (it will have new features), I don't have any time these days! :S
[ This Message was edited by: jomateixa on 2008-01-19 16:14 ]
Posted by geroldbravo
yeah... and i hope you'll make a driver base on kopritis 2.7 and genus 6.0!!
Posted by jomateixa
On 2008-01-19 19:00:08, geroldbravo wrote:
yeah... and i hope you'll make a driver base on kopritis 2.7 and genus 6.0!!
Kopritis 2.7 = Wilma 2.5 with sharp 08
So...Ultimate is a independent driver, but built with the knowledge of several people on this forum. The great work is done when we work together. A big regard to all sharing-people!
Posted by mccm
thanks for your effort .
Posted by ssnopyybg
in v2.0 Final how fps is the video ? sry for my english but ... :S
Posted by jomateixa
No modified ==> 18 fps (you can see the changes in first post)
Posted by ssnopyybg
ok , tnx ... but this 18 fps
I preffer the 2.7 with 35 fps .. however the driver is very good at pics
Posted by jomateixa
On 2008-01-21 21:19:53, ssnopyybg wrote:
ok , tnx ... but this 18 fps
I preffer the 2.7 with 35 fps .. however the driver is very good at pics
high fps gives bug in Zoom and BestPic, 18 fps is the max value avoiding bugs
Posted by theshadow03
@jomateixa i heard that you work an another version of the ultimate driver...when are you planing to release the new version?
Posted by (zalman)
Posted: 2007-12-30 18:55 by ahil13
i think this is the max fps in video
seq_vf_config_11 = $s6 11
#SET_REG(07,03)
#SET_REG(08,02)
#SET_REG(09,3c)
$cc 04
#COM_EVENT(03,04)
$cl
#COM_EVENT(03,0f)
$cx
$cx;
seq_vf_config_12 = $s6 12
#SET_REG(07,03)
#SET_REG(08,02)
#SET_REG(09,24)
#COM_EVENT(03,98);
seq_vf_config_19 = $s6 19
#SET_REG(07,03)
#SET_REG(08,02)
#SET_REG(09,24)
#COM_EVENT(03,98);
seq_vf_config_20 = $s6 20
#SET_REG(07,03)
#SET_REG(08,02)
#SET_REG(09,98)
#COM_EVENT(03,98);
seq_vf_config_21 = $s6 21
#SET_REG(07,07)
#SET_REG(08,06)
#SET_REG(09,24)
#COM_EVENT(03,98);
seq_vf_config_22 = $s6 22
#SET_REG(07,07)
#SET_REG(08,06)
#SET_REG(09,24)
#COM_EVENT(03,98);
seq_vf_config_23 = $s6 23
#COM_EVENT(34,01)
#SET_REG(07,05)
#SET_REG(08,04)
#SET_REG(09,98)
#COM_EVENT(03,98);
seq_vf_config_24 = $s6 24
#COM_EVENT(34,01)
#SET_REG(07,05)
#SET_REG(08,04)
#SET_REG(09,98)
#COM_EVENT(03,98);
tested and bestpic is working 100%
____________
Posted: 2008-01-04 19:11 by ahil13
@norbi_nw
in 35fps driver the framerate is 24 with 35max
in my it`s vibrate framerate is 26-30 and the max ~42
Posted by Raiderski
0x98? let's calc...
0x98 / 2 = 0x4c = 76 fps
not too much? after this you must consider value 0x98 because it's ok only if register is 8bit unsigned (Kxxx control registers are 8bit signed). i have 25fps for normal and 15fps for night and i still don't know how BestPic bug looks like. i didn't changed all vf_ settings but video only
Posted by number1
anything over 22fps is uncontrolable it doesn't respond in time when you try to zoom, pause ,play etc,
Posted by geroldbravo
i've tried that 35 fps already.. yes it does'nt have any bestpic bug at all, and it is great, but i found a bug that makes my phone shutdowns by itself...... i mean when i lock my phone * follow by the menu.. there it can't be unlocked again and it got white screen then shutdown... when i changed cam driver.. it never happened again... i don't know if im right, but i've used it about almost a day and happened about twice... when i change cam driver it never hppened again..
Posted by ahil13
I have not knowed how many is the max framerate and was hope if put more it will be the max, like this for sharpness
if put 0b it will be 08, because 08 is the max.
[ This Message was edited by: ahil13 on 2008-01-22 20:51 ]
Posted by Andi2k
@jomateixa
Hi!
I tried to reduce ISO settings in Auto and Night Portrait Mode To 200,
and raise exposure time, but i don't get it...
Can you please tell me where to change in your driver ?
I found Scene and ISO ... but if I change settings in Scene, the exposure time doesn't change...
I although tried to change "Normal (non-document) mode settings"
Changing "#COM_EVENT(06,0e)" doesn't show an effect.
Changing iso works, but without raising exposure time the pictures are too dark of course.
Playing arround with "Xenon Flash initialization" got me one picture with 2 sec exposure time, and the next pictures are without any changes, until i close the cam , and open it again... then i can get an 2 sec exposure time picture again... as you can see nothing works as i want it too
Would be nice, if you would help me a little bit.
Cu,
Andi
[ This Message was edited by: Andi2k on 2008-01-23 05:38 ]
Posted by Togan
ok noob question, how do you install this new update to your k810?? does sony creative suite do it for you orr?
Posted by geroldbravo
@jomateixa
i have found this driver and they say it's the ultimate w/35 fps.. it's somewhere around this post... don't know what page
... the cam is good,or should i say great in capturing photos... but what i have said earlier, it automtically hangs my phone and gives whitescreen.... but when i change driver it does'nt happened again.. but look at the photos i've captured with your driver... 
amazing... on the left side is my daughter and on the other side is her cousin... pretty cute pics also...
even if you'll see the original size... i dont even see a bit of a small squares... (pixels??) just like this resized ones..
portrait mode.. flash off..
Posted by toyds
@geroldbravo : what cam driver did you used for that picture?
the standard one or the vivid one?
tnx a lot
Posted by toyds
@All,
which command for the focus?
Ultimate driver has fast focus and i want to implement it in genus 6.0
tnx a lot
Posted by geroldbravo
@toyds
it's the vivid one..
Posted by hyperion1707
On 2007-12-25 16:07:15, Raiderski wrote:
1. download vividcolors version
2. find all #COM_EVENT(58,xx) - 'normal' mode and 'doc' mode
3. set xx to: 00 (neutral) - 1D (insane)
I'm using Kopritis 3.6 and I couldn't find #COM_EVENT(58,xx). @Raiderski, tell me, please, how can I increase color saturation ?
Posted by jomateixa
On 2008-01-23 20:12:51, hyperion1707 wrote:
On 2007-12-25 16:07:15, Raiderski wrote:
1. download vividcolors version
2. find all #COM_EVENT(58,xx) - 'normal' mode and 'doc' mode
3. set xx to: 00 (neutral) - 1D (insane)
I'm using Kopritis 3.6 and I couldn't find #COM_EVENT(58,xx). @Raiderski, tell me, please, how can I increase color saturation ?
Insert #COM_EVENT(58,xx) inside NORMAL_MODE and/or DOC_MODE definitions, but you will lose the sharpness, and your flash pics will become more noisy...
Posted by jomateixa
On 2008-01-23 13:53:42, toyds wrote:
@All,
which command for the focus?
Ultimate driver has fast focus and i want to implement it in genus 6.0
tnx a lot
Increase AE_SLOW_SHUTTER fps in SIZE CONFIGS section (less light exposure but minor noise & fast AF)
[ This Message was edited by: jomateixa on 2008-01-23 19:46 ]
Posted by Goldmen
On 2008-01-23 20:43:42, jomateixa wrote:
Increase AE_SLOW_SHUTTER fps in SIZE CONFIGS section (less light exposure but minor noise & fast AF)
Wich "seq_vf_config"....?
There are 11-23....
Posted by jomateixa
On 2008-01-23 20:59:21, Goldmen wrote:
On 2008-01-23 20:43:42, jomateixa wrote:
Increase AE_SLOW_SHUTTER fps in SIZE CONFIGS section (less light exposure but minor noise & fast AF)
Wich "seq_vf_config"....?
There are 11-23....
all, but not 11
[ This Message was edited by: jomateixa on 2008-01-23 23:25 ]
Posted by jomateixa
On 2008-01-22 19:55:02, Raiderski wrote:
0x98? let's calc...
0x98 / 2 = 0x4c = 76 fps
not too much? after this you must consider value 0x98 because it's ok only if register is 8bit unsigned (Kxxx control registers are 8bit signed). i have 25fps for normal and 15fps for night and i still don't know how BestPic bug looks like. i didn't changed all vf_ settings but video only
Soon you will know how BestPic bug looks like....
It even happens to me with 18 fps, but in 1% of shots aprox....
Posted by toyds
@jomateixa :
so i will change this settings?
seq_vf_config_12 - 24
#COM_EVENT(03,24); // 7,5 fps AE_SLOW_SHUTTER
??
tnx a lot
Another question : where in seq_vf_config do the video fps corresponds?
tnx a lot
Posted by Goldmen
On 2008-01-24 00:19:42, jomateixa wrote:
On 2008-01-23 20:59:21, Goldmen wrote:
On 2008-01-23 20:43:42, jomateixa wrote:
Increase AE_SLOW_SHUTTER fps in SIZE CONFIGS section (less light exposure but minor noise & fast AF)
Wich "seq_vf_config"....?
There are 11-23....
all, but not 11
[ This Message was edited by: jomateixa on 2008-01-23 23:25 ]
Thank you!
Posted by Raiderski
Soon you will know how BestPic bug looks like....
It even happens to me with 18 fps, but in 1% of shots aprox....
BestPic viewfinder is seq_vf_config_12. you don't want problems with BestPic - do not touch draft fps and slow shutter values in this config
Posted by jomateixa
On 2008-01-24 10:52:59, Raiderski wrote:
Soon you will know how BestPic bug looks like....
It even happens to me with 18 fps, but in 1% of shots aprox....
BestPic viewfinder is seq_vf_config_12. you don't want problems with BestPic - do not touch draft fps and slow shutter values in this config
In Number1 driver that's not changed and he's having a little BestPic bug too...
So we think it's because of video fps...
Posted by jomateixa
On 2008-01-24 05:40:03, toyds wrote:
@jomateixa :
so i will change this settings?
seq_vf_config_12 - 24
#COM_EVENT(03,24); // 7,5 fps AE_SLOW_SHUTTER
??
tnx a lot
Another question : where in seq_vf_config do the video fps corresponds?
tnx a lot
Yes but watch the code, DRAFT_RATE fps must be equal or bigger than AE_SLOW_SHUTTER fps
Video is seq_vf_config_21 and seq_vf_config_23
[ This Message was edited by: jomateixa on 2008-01-24 12:29 ]
Posted by toyds
@jomateixa:
thanks a lot for the answer
Posted by mo0os
mannnnn it has a bugggggggg whenever i take a pic in day light the flash shooots !! force flash ???????? or what ? both standard and vivid !
Posted by DeKosta
On 2008-01-25 22:48:22, mo0os wrote:
mannnnn it has a bugggggggg whenever i take a pic in day light the flash shooots !! force flash ???????? or what ? both standard and vivid !
Its no bugg, its force flash as you wrote.
I love FF, every driver should have that implanted!
Wich entry in the code is for FF?
Posted by toyds
i think this is the FF command
seq_set_prop_e_2 = $sb 04 // Forced ON, for service menu and production tests
$c9 08 // R5 camera version?
#COM_EVENT(5a,83) // Forced xenon 0b10000011, slow sync at beginning
$cl
#COM_EVENT(51,00) // Sensor scene "Auto 00"
#COM_EVENT(5a,8b) // FLASH_MODE 0b10001011: Flash on, RER off, sync on beginning.
$cx;