Camera Drivers Sony Ericsson for Series W/K/Z/VGA

On 2008-03-11 20:56:29, Shotgun wrote:
Best Cam driver for the W880 brazuka?

On 2008-03-13 08:25:41, aashish007 wrote:
hey i wanted to ask a question..is zooming possible in 2mp mode for w830/w850??
i have seen w580 zooming..does it require a patch or how do we have to do it?

On 2008-03-15 02:42:06, jofu1 wrote:
Brazuka, what about 7.5 for w200 48hz?
Post the news to know more about that.

Thanks

Photo:
-Features:
Manual Settings Photo:
-White Balance WB Color correction/Effects
-Exposure EV (OFF)
-Brightness/Contrast
-Shutter Speed:ISO/FPS
-Saturation/Sharpness


Video:
-Features:
Manual Settings Video:
-FPS
[/QUOTE]

Changes Version Mini SuperMode VGA CAM:

*Shutter Speed:
Shutter Speed + ISO only Photo
FPS only Video
*Color Correction:
Supported and works only by the colors basic color correction WB RGB sensor

Supported for modules of 1.3 MPixel Micron
Cameras VGA changes aren´t as visible as the implementation of shutter speed VGA modules in this limited by the sensor

Mini Super Mode Video for model MCBXXX
====================================

*Supported for VGA CAM works with model MCBXXX

Mini SuperMode for VGA CAM
======================
[/QUOTE]
Features:
-Manual settings:Photo/Video
-Exposure EV
-Shutter Speed:ISO(Shutter Delay+Shutter Width)/FPS(Only Video)
-Saturation/Sharpness
-Brightness /Contrast
-Color Correction/Effects
[/QUOTE]
How to upload camdriver0.dat and *.lng to phone:

- download XS++ 3.1.(example programm phone xs++)
- shut down your phone.
- run XS++, click on 'Connect', put USB cable to your PC, while pressing 'C' key on your phone, put the other side of cable to your phone, wait XS++ recognize your phone.
- click on FSX™ radio button, click on 'Start FSX', wait a minute or two.
- find IFS/SETTINGS/CAMERA, drag and drop camdriver0.dat to right window.
- find TPA/PRESET/SYSTEM/LANGUAGE, drag and drop *.lng to right window.
- in XS++ click on 'Shutdown', then click on 'Yes'.
- close XS++ and disconnect your phone.

Download setool (example programm setool)
How to Proceed in CID 50/51/52 with the program *SETOOL/PHONEXS++/FAR:
*SETOOL USER GUIDE
1-Unpack the folder tpa_ifs
2-Copy in its tpa_ifs this way: ifs/settings/camera
3-Copy the file "camdriver0" the latest version to the place indicated
4-After passing your tpa_ifs compressed in *.Zip by SETOOL
5-Press the button Flash
6- find TPA/PRESET/SYSTEM/LANGUAGE in MISC FILES click in FLASH botton
7-Wait finish the process with the message ready


How to use this camdriver: MiniSuperMode for VGA CAM

-Changing Exposure EV: in menu choose Manual settings, choose Exposure, with joypad you can change its value



- Changing ISO: in menu choose Manual settings, choose Shutter Speed:ISO/FPS, with joypad you can change its value.

- Changing FPS (Only VIDEO): in menu choose Manual settings, choose Shutter Speed:ISO/FPS, with joypad you can change its value.


- Changing Saturation: in menu choose Manual settings, choose Saturation/Sharpness, with joypad you can change its value.


- Changing Sharpness: in menu choose Manual settings, choose Saturation/Sharpness, with joypad you can change its value.


- Changing Brightnesst: in menu choose Manualsettings, choose Brightness/Contrast, with joypad you can change its value.


- Changing Contrast: in menu choose Manualsettings, choose Brightness /Contrast, withjoypad you can change its value.



- Changing Color Correction: inmenu choose Manualsettings, choose Color Correction/Effects,with joypad you can change its value. Color Correction is relative to current white balance.


- Changing Effects: inmenu choose Manualsettings, choose Color Correction/Effects,with joypad you can change its value. Color Correction is relative to current white balance.

BrAzzUkA´s
Thanks to friends and developers
Alex Herdea Daniel Vlad Sadeghi SPU, Raiderski, Sergiober and the others modders developers
Mini Quick Guide Credits Sadeghi

MiniSuperMode Cybershot™ VGA CAM w200
Download:[b]
http://www.4shared.com/file/4[....]perMode_Cybershot_VGA_CAM.html
[b]MiniSuperMode VGA CAM
Download:
http://www.4shared.com/file/4[....]ed/Mini_SuperMode_VGA_CAM.html
Interface Graphic Language MiniSuperMode VGA CAM
CID52-R4GB001/CID52-R4HA014/CID52-R4JA011
Download:
http://www.4shared.com/file/4[....]face_MiniSuperModeVGA_CAM.html



[ This Message was edited by: brazuka on 2008-05-08 13:11 ]

---

Posted by brazuka
Mini Super Mode for model Omnivision 1.3MPixel/2.0MPixel

Model 1.3MPixel
Manual Settings Photo:
image quality controls including:
- color saturation/brightness
- hue
- gamma
- sharpness (edge enhancement)
- lens correction
- white pixel canceling
- noise canceling
- 50/60 Hz Brightness-luminance detection

Model 2.0MPixel
Manual Settings Photo:
image quality controls including:
- color saturation/brightness
- hue
- gamma
- sharpness (edge enhancement)
- lens correction
- white pixel canceling
- noise canceling
- 50/60 Hz Brightness-luminance detection
.
.
.
Reserved





[ This Message was edited by: brazuka on 2008-05-08 13:08 ]

---

Posted by amnher
Wow a new feature for 1.3Mpixel

Im so much excited on this
Ill w8 for this one

---

Posted by matiaz
K310 driver take bad pictures, can you check this??

---

Posted by tsaejjeast
hi,anybody can send camdriver5.5 for k510 to me by email. i don't visit http://brazzukas.4shared.com/.
my email:tsaej@sohu.com
Thx.

---

Posted by brazuka
NEWS:

Sony announces development of 35mm CMOS sensor

Pre-PMA 2008: In a surprise move Sony today announced its entry into the rapidly-expanding 24x36mm imaging sensor market with its own 24.81 megapixel CMOS offering. Joining Canon and Nikon in the full-frame market, this new chip promises to output all pixels at 6.3 fps with lower noise than other designs of similar pixel-pitch thanks to its “Column-Parallel A/D Conversion Technique” whereby each column of photosites is given its own Analogue to Digital Converter. The ADCs themselves are 12-bit, flying in the face of current trends which are toward 14-bit devices but the combination of speed, dynamic range and sheer resolving power displayed by this sensor make it one to watch for when Sony puts into full production hopefully before the year is out.

Press Release:

Sony Develops 35mm full size CMOS Image Sensor with 24.81 Effective Mega pixel resolution and extremely high signal conversion speed for use in Digital SLR Cameras

~ All-pixel scan mode of 6.3 frame/s ~

Tokyo, Japan – Sony Corporation today announced the development of a 35mm full size (diagonal: 43.3mm / Type 2.7) 24.81 effective megapixel, ultra-high speed high image quality CMOS image sensor designed to meet the increasing requirement for rapid image capture and advanced picture quality within digital SLR cameras.

Development background

In recent years, the demand for digital SLR cameras featuring high resolution and wide graduation ranges capable of capturing every detail of the subject matter has continued to increase, particularly among high-end amateur users. Additionally, the increasing user requirement to shoot from the same focal length and angle as 35mm film cameras using interchangeable lenses has led to significant interest in the development of 35mm, full size CMOS image sensors.

However, there are a number of technical challenges to developing full (large) size image sensors, such as the propagation delay caused by using extended power circuitry and signal lines, and the difficulty of maintaining uniform sensitivity and signal saturation across the surface of the screen.

Furthermore, because current semiconductor exposure systems are unable to cover the entire chip surface of 35mm full size CMOS image sensors, multiple exposures are required. This results in the difficulty of accurately controlling exposure variance and matching circuit patterns.
Advantages of this device

The newly developed CMOS image sensor combines unique circuit design technology with Sony's advanced fabrication expertise, including a system of joining multiple exposed patterns together and advanced planarization for minimizing fluctuation, to realize 35mm, full size, 24.81 effective megapixel resolution. Sony’s “Column-Parallel A/D Conversion Technique” also provides each column within the sensor with its own A/D converter, minimizing image degradation caused by the noise that arises during analog processing while at the same time delivering an extremely high signal conversion speed.

The enhanced image quality generated by the sensor’s 24.81 effective megapixel resolution, wide range of graduation expression achieved by its full size broad dynamic range, and the low noise, high resolution, ultra-responsive performance provided by Sony’s Column-Parallel A/D Conversion technique enable it to meet the ever-increasing requirements within high performance digital SLR cameras.

Sony will target for mass production of this CMOS image sensor within this year.
Major features

1. High picture quality in 35mm full size image sensor with 24.81M effective pixels
2. “Column-Parallel A/D Conversion method” achieves high S/N and high-speed imaging
3. High-speed digital output （12 channel parallel LVDS output）
* CDS/PGA (24dB) Circuit （PGA: Programmable Gain Amplifier）
* 12bit-AD Converter on chip
* Diversified readout mode
* All-pixel scan mode 6.3 frame/s (12bit)
* Window readout

Device Structure

* Image size Diagonal width 43.3mm (Type 2.7)
* Total number of pixels 6236 (H) x 4124 (V) approx. 25.72M pixels
* Number of effective pixels 6104 (H) x 4064 (V) approx. 24.81M pixels
* Number of active pixels 6096 (H) x 4056 (V) approx. 24.73M pixels
* Chip size 41.0mm (H) x 31.9 mm (V)
* Unit cell size 5.94μm (H) x 5.94μm (V)
Info:
www.sony.net/SonyInfo/News/Press

[ This Message was edited by: brazuka on 2008-04-09 03:33 ]

---

Posted by uzumakiadrya
anyone in here have original K310i camdriver SW 3.7...can u share it....thanks before...
email me .... uzumaki_adryan@yahoo.co.id

---

Posted by kazador07
i need the best camdrive for my k310@w200 please

---

Posted by brazuka
MiniSuperMode VGA CAM

fix manual settings video fps

edited#1

[ This Message was edited by: brazuka on 2008-04-27 00:34 ]

---

Posted by brazuka
Mini Super Mode VGA CAM MT9V112/MT9M112 for k510

Guide User Language Mini SuperMode VGA CAM for 1.3MPixel

-Changes version for Mini SuperMode for VGA CAM for 1.3MPixel:
=====================================
Effects=>Manual Settings

Off=>Exposure

Black&White=>Color Correction/Effects

Negative=>Saturation / Sharpness

Sepia=>Brightness/Contrast

Solarize=>Shutter Speed:ISO/FPS
=======================================
Mini Super Mode VGA CAM MT9V112/MT9M112 for k510 with
Interface Graphic Language CID49-R4CH003
Download:
http://www.4shared.com/file/4[....]e8/MiniSuperMode_for_k510.html




[ This Message was edited by: brazuka on 2008-04-22 21:50 ]

---

---

Posted by amnher
Would you make one update for w550i/w600i with this Omnivision?

---

Posted by brazuka


w600 don´t work with these model omnivision

---

Posted by amnher


Then these 1.3 Mpixel version will not come to life for w550i/w600i users?
Cause the 5.96 brazzuka driver is still broken

---

Posted by argento
MiniSuperMode VGA CAM w200
Fotos:








[ This Message was edited by: argento on 2008-04-27 00:05 ]

---

Posted by brazuka
Sustainable energy use in mobile communications

Executive summary
Protecting the environment and combating climate change are two of the most
pressing challenges facing humankind. As energy prices soar, network operators
are increasingly scrutinizing their environmental and social responsibilities … and, of
course, their energy bills.
It is worth pointing out that mobile communications – like fixed telecoms – is itself a
relatively low-impact industry when it comes to energy usage and carbon dioxide
(CO2) emissions, despite its rapid growth.
From our own lifecycle assessment studies, and other published data sources, we
estimate that approximately 0.14 per cent of global CO2 emissions and
approximately 0.12 per cent of primary energy use are attributable to mobile
telecom. This compares with 20 per cent of CO2 emissions and approximately 23
per cent of primary energy use for travel and transport, for example. The annual
CO2 footprint of the average mobile subscriber is around 25kg – which is
comparable to driving an average car on the motorway for one hour, or running a
5W lamp for a year.
Many telecom operators have about the same energy consumption today as they
did in 1995, but with twice as many total subscribers. Technology improvements
have kept energy usage very low, and there are still great opportunities for the ICT
industry to reduce CO2 emissions. For example, smart use of telecom, intelligent
homes and offices, and travel substitution could all have a dramatic effect on energy
usage and CO2 footprint.
Ericsson itself has conducted lifecycle assessments of mobile networks for more
than a decade. These studies have consistently found that it is the energy
consumption in the ‘use phase’ of radio access networks that has the most
significant impact on the environment out of all the company’s products (radio
access products are the company’s highest-volume product and account for 75 per
cent of indirect CO2 emissions).
Energy optimization in mobile communications is a three-step process.
First, mobile communication networks need to be dimensioned with as few
equipment sites as possible, while maintaining the desired coverage, capacity and
quality.
Second, the energy efficiency of individual products – as well as that of entire sites –
must be optimized, for examples through the deployment of small, efficient sites
where large cells are impractical, such as in hilly terrain or to serve small
populations in isolated areas.
Third, there needs to be ongoing research and development into the use of
renewable energy sources, such as solar, wind and biofuels.

Introduction
Mobile communication is one of the most important technologies for contributing to
social and economic development around the world. Many studies have pointed to
the contribution of mobile communications to GDP growth and the UN Millennium
Development goals highlight ICT as key to sustainability.
Optimizing energy efficiency will not only reduce environmental impact, it will also
cut network costs and help to make communication more affordable for everyone.
Finding new efficient energy solutions also helps spread access to communications
by opening up more options for the siting of radio sites in a sustainable, low-impact way...

more info:
http://www.ericsson.com/techn[....]epapers/sustainable_energy.pdf

---

Posted by amnher
Man is there no other way to fix the Brazuka 5.96 regrding the sliced up view finder. Cause it will not be usable if I cant see a thing because its distorted. Can you fix it or will the new 1.3pixewl mini supemodel will work?

---

Posted by amnher
this is taken by n73 ME. Focus mode night

Bugs in 5.96 brazuka camera driver



The screen of w550i has lines in camera

this the one im trying to capture:



Hope you fix it

---

Posted by amnher
Man any news on what you have said about w550i/w600i driver

---

Posted by amnher
Some screenshots

5.97





K600




Original cam driver




Goodarkshot



I posted some screenshot for comparison basis only.
I notice in certain conditions when an image has a colorful thing beside it, sometimes colors are exxagerated and can you implement the flash feature like in goodarkshot and original camera driver?The one that brigthens flash as soon as we take pictures?


[ This Message was edited by: amnher on 2008-05-13 06:37 ]

---

Posted by mrgambit
Sir Brazuka, why haven't you develop any driver for k770i? Thanks...

---

Posted by matiaz
Brazuka, the night mode in w200 camdriver don't work, last version 7.5

---

Posted by brazuka

Because I see no need, there are many drivers for these models k770/t650 you can see that thread and test them.Don´t askme whether they are good because I don´t know how it was working
Good luck
here:
http://www.esato.com/board/viewtopic.php?topic=162996&start=0

U can help in this topic
Modded Camera Driver for k770/t650 For all developers modders and users
http://www.esato.com/board/viewtopic.php?topic=170581


Whats last version v7.5? the last version is minuspermode VGA CAM cybershot


_________________
BrAzzUkA´s BZK®
picasaweb.google.com/brazzukas
brazzukas.4shared.com

[ This Message was edited by: brazuka on 2008-05-29 14:24 ]

---

Posted by amnher
Can you make adjustments wherein the flash will work like the original flash?
Cause i notice that the original camera driver for w550i automatically increases the brightness as soon as I take shot in dark places even brighter when we first turn on the flash light???

---

Posted by esteban_efe
wonder if the camdriver of w380 I found myself in another post works and what use does not work, I use the (far) and wanted to know if I do poorly in or change the file (camdriver0.dat)? o I must also eliminate camdriver1.dat said that if camdriver1.dat someone who knows me explain thanks.

---

Posted by matiaz

*I'm using the 7.5 super camdriver final .. Mini super mode incorporates the improvements that have the 7.5 version?

Sorry about my bad english!
*****************************************************
Uso la versión 7.5 porque no estoy seguro de que el mini supermode incorpore las mejoras de dicha versión..

[ This Message was edited by: matiaz on 2008-05-26 18:31 ]

---

Posted by brazuka


Use or try to use the both drivers v7.5 or minisupermode vga cybershot
Read the post about minisupermode vga cam and read the manual settings guide user

Good luck

---

Posted by matiaz
Brazuka, the mini supermodemode cybershot version have a bug when try to select 7.5fps 10fps 15fps 14fps in the menu..

What number of fps you recommend for the differents situations (sun, night, incandecent light, etc)? Auto mode film with lower fps ratio ever

Can you explain detailed what do the effects? (EV, saturation)

Thx for your time, your camdriver is very good!! Congrats!

---

Posted by brazuka


@matiaz

Please read the posts and read the user guide manual settings
FPS only for video, the function FPS only for Videos works.
Don´t is my driver and this driver is to all you

best regards

---

Posted by matiaz
I can't select 7.5fps 10fps 15fps 14fps (on videos) because the camera's turns "black" ..

I know how to select effects on the camera, but don't know what's really do in the picture!! What is saturation? What changes take on picture?

---

Posted by iamsinned06


how ca i upgrade my K610i camera driver?
and my sound driver too?

please help?

---

Posted by aeaeekung
Can I know about Code

I want to edit Something



Thx..

[ This Message was edited by: aeaeekung on 2008-07-18 20:58 ]