Camera Drivers Sony Ericsson for Series W/K/Z/VGA

Posted by amnher
pix ADCM 3855:
During night:low light
Normal mode:

Night mode:

-----------------------------------------------------------------------------------------------------------------
Original w550i 4.6
During night lwo light
Normal:

Nightmode:

-------------------------------------------------------------------------------------------------------------------------
During daytime good lighting:
ADCM 3855:

--------------------------------------------------------------------------------------------------------------------------
4.6 orig:

----------------------------------------------------------------------------------------------------------------
I noticed in ADCM 3855 when i choose night mode
it displays half screen black half green

Posted by amnher
All I can say is the pictures are grainless and spotless compared to the original one as you can see but the pictures are dark compared to the original. So far I can compare it now to the gooddarkshot one ive found from the link ive given

Posted by amnher
gooddarkshot from abmadman pix version 5.6

Posted by amnher
hope this screenshots help you in the driver. Go for it and we will be waiting for you response and we will do everything to support you in your cam driver the best way we can. Thnk you for the hardwork. hope you can make it good

another thing im sorry if i am only taking pictures of the same place cause my surroundings are not good ^_^

[ This Message was edited by: amnher on 2008-02-18 02:22 ]

Posted by amnher
whats this supercolor in the readme?

and another thing the half green half black screen happens when I activate the solarized effect

[ This Message was edited by: amnher on 2008-02-18 03:13 ]

Posted by killem
K550i R8BA024, all camera settings is auto:

v4.85 BrAzUkA - Auto

v2.38 SonarikK510 - Auto

v4.85 BrAzUkA - Auto

v2.38 SonarikK510 - Auto

[ This Message was edited by: killem on 2008-02-18 08:01 ]

Posted by brazuka
@ amnher
and about video recording ? Try to record a video in the two resolutions high and low and then see how this review analise with quicktime and writes the results here, u may not think that this driver can change anything.
About super color was an attempt to saturate the colors and brightness to the colors with replacing the effect solarize by super color but am almost certain that all drivers on the way effects blocks any attempt to change from the functions.
Then replace the super color by the light effect solarize.

@killem

try to use the new driver fix bug exposure for auto mode

If you can take pictures of objects as a box of colored pen color in the natural environment , dayligth with good light using the modes auto mode and super color in effect solarize to confirm that the property effect blocks the actions stimulated by functions.There models that the property effects completely blocks any attempt to change.

nice day guys!

[ This Message was edited by: brazuka on 2008-02-18 12:27 ]

Posted by brazuka
@killem

If the exposure in the auto mode does not change, try to increase the length of exposure and perhaps increasing the values of gamma and try to post upload the pics photos a server or hosting like as http://www.imageshack.us/

more time exposure

[ This Message was edited by: brazuka on 2008-02-18 11:36 ]

Posted by amnher
what do you mean by analyze quicktime? And What Am I suppose to write with results I mean the exact video?

Posted by brazuka

On 2008-02-18 13:32:16, amnher wrote:
what do you mean by analyze quicktime? And What Am I suppose to write with results I mean the exact video?

use for analyse videos : frames per second , time, size, resolution etc...

http://img520.imageshack.us/img520/2151/filmeqg3.jpg

download:
http://www.apple.com/quicktime/download

[ This Message was edited by: brazuka on 2008-02-18 13:16 ]

Posted by sebas9010
Versions 4.0, 4.15 and 24mhz of w580 start says there is another running application, please someone to fix it ..

[ This Message was edited by: sebas9010 on 2008-02-18 23:46 ]

Posted by brazuka
@ sebas9010
You are installing the drivers correctly? It is almost impossible all versions show the same message to another application because the version v4.0 have pics have photos , do u really that are installing drivers correct?
Remove de old driver and install de new driver

Posted by sebas9010
I have on my mobile version 4.0 and works well but delete the camdriver 4.0, and placed the version 4.15 and does not start the camera, a message appears the same as version 4.0, 24mhz

Posted by amnher
man I got it just charging my phone but one question, how do i tke low and high quality since the standrd is high quality

Posted by argento
v4.0 BrAzUkA´s_24mhz w580

photos auto mode normal

371kb

706kb

387kb

Posted by amnher
Heres the 176x144 version:

Heres the 128x96 version:

I noticed when I activated video the view image is not distorded but when i return to camera mode the image is distorted

Posted by who

On 2008-02-06 16:07:46, brazuka wrote:
@who
I did not understand what you wanted to say with lines for the k610 or the lines that works with your k610 ??? What that means?
Driver for k610 post#8
http://www.esato.com/board/viewtopic.php?topic=159467&start=105

[ This Message was edited by: brazuka on 2008-02-06 15:09 ]

@brazuka

Sorry I wasnt clear enuff. After installing the cam.dat file when i activate the camera there is alot of lines on the screen and also on the picture that I took.

Appreciate your help on this.

Posted by amnher
@Brazuka

What are your findings sir?
The view is fix in video but distorted when in camera mode. I already posted the results of movie inspector

Posted by brazuka
@amnher

The recording of the video has to be in good conditions with high brightness, high ligth to see if something changed in speed, the recording video with high brightness because the fps are low for the conclusion we

@who
post the some pics here k610, the driver with this problem in pics or videos?

Posted by who
I got it to work after 4th tries the 1 st photo was wat i trying to say , the second is using the 2nd driver but the 3rd driver for the 27mhz it just return to main menu after I press the cam button, cant even start the camera at all

2nd photo (could get easto to upload photo so have tio turn to imageshack)

[ This Message was edited by: who on 2008-02-19 12:03 ]

Posted by brazuka
@who
The driver who leaves the matrix rows is the driver v3.9_27mhz? And it must be seen
The hardware don´t support frequency above 27mhz so come back to the driver v3.9_old or v3.9
Are doing with the test chip OV2640 in a w580 if anything good can be the basis for all these drivers who use these chips for all these mobil phone that use this chip but of course each person can use as you want

[ This Message was edited by: brazuka on 2008-02-19 13:20 ]

Posted by amnher
Can you fix the distorted image in camera mode cause in video mode picture is ok in the viewfinder

Posted by killem
brazuka, your v4.85 W610 camdriver is not working. Camera start up, but when I try to make a picture, the phone is hang-up.

PS: Sorry for my english, I think you understood me.

[ This Message was edited by: killem on 2008-02-19 14:20 ]

Posted by brazuka

On 2008-02-19 15:19:01, killem wrote:
brazuka, your v4.85 W610 camdriver is not working. Camera start up, but when I try to make a picture, the phone is hang-up.

PS: Sorry for my english, I think you understood me.

[ This Message was edited by: killem on 2008-02-19 14:20 ]

Features v4.85 w610:

-Based on version original driver cam W610/k550 and based version v2.3 w610/v2.3 k550 and based k810
-Remove Super_Color™ for w610
-New Normal Mode
-New Nigth Mode
-JPEG compresion/New JPEG buffer size/New JPEG_qtable
-Power Sequence with 24mhz frequency
-Master Clock™ w610
-Scenes with new EXIF adapted and appropriate for each scene in test

*******************
About Scenes-Effect
*******************
*Pseudo Scenes

Remove pseudo-scenes super color because for not having any functionality with the chip simply the only change visible in the photos
is the saturation of colors that in some cases the real environment distorted
The property effects blocks or does not respond to any attempt to stimuli of functions by either not have any functionality

Try to test the driver v4.85 w610

Posted by brazuka
amnher

Matrixes in the video is the consequence of the increase in the frequency hardware does not support greater increase in frequency and the lines that compem the video are the vertical and horizontal lines and are limited by the capacity of the hardware to produce then the lines that the hardware support is bounded by resolution by both lines are adjusted for working with the current frequency, each increase of a vertical or horizontal line there will always be a space between them so the fact distorted the matrix, use the driver v5.95_ADCM_3855 BrAzUkA´s

Posted by argento
photos w580

Posted by amnher
is there a new version?i mean changes

Posted by amnher

On 2008-02-19 17:45:07, brazuka wrote:
amnher

Matrixes in the video is the consequence of the increase in the frequency hardware does not support greater increase in frequency and the lines that compem the video are the vertical and horizontal lines and are limited by the capacity of the hardware to produce then the lines that the hardware support is bounded by resolution by both lines are adjusted for working with the current frequency, each increase of a vertical or horizontal line there will always be a space between them so the fact distorted the matrix, use the driver v5.95_ADCM_3855 BrAzUkA´s

WHat will I do now?

Posted by amnher
Hope you will not give up, if the gooddarkshot was able to produce gud driver though the down side is that its dark, then you can, or can you mod the gooddarkshot driver to be more brighter like the version 5.5 w550i driver w/c is found here:

http://walkmans.wordpress.com/2007/07/15/1-cam-driver-for-w550/

and smoothen tthe image in the view cause when I use the gooddarkshot driver pictures in the viewfinder are crooked in edges but the final shots are ok. then it will be the best cam ever.

Can you make it more brighter and remove the crooked edges in the view finder?cause the final shots are ok but in viewfinder its crooked. here is the link:
http://aatoblogchebhai.blogspot.com/2007/12/dumpage.html

Here is the direct link of the gooddarkshot driver for w550i/w600i:
http://www.4shared.com/file/3[....]t.html?dirPwdVerified=636d3d43

Hope you study the gooddarkshot driver which is Camera Driver 2 in the blog. Hope you can improve it somehow. sharper image in view finder because it is crooked in edges and final shot is not crooked and make it brigther and colorful like version 5.5 camera driver w550i cause its too dark.

Thank you so much and I believe in you. This driver is grainless and even in low lighting areas, It is like having a low-end cybershot driver in w550i

[ This Message was edited by: amnher on 2008-02-20 03:46 ]

[ This Message was edited by: amnher on 2008-02-20 03:48 ]

[ This Message was edited by: amnher on 2008-02-20 03:50 ]

Posted by amnher
hope you can mod it

Posted by killem
Brazuka,
Can you put all drivers in the first post?

Posted by killem
brazuka,

v.4.85 for W610
The problem is not solved. Phone hang-up again.

Posted by aashish007
@brazuka
ure v3.45 w830 driver doesnt work...when i click on the camera icon..it says that another application is running..

Posted by brazuka
@amnher
about driver w600/w550
The drivers are basically the same to v.goodshot and v5.95 ADCM only the version v5.95 this with the properties for working with frames more fps.
Test driver v5.95 recording videos in the two resolutions but in good conditions of high illumination lighting and post the results here.
The driver is limited to w600/w550 I think this already in its total capacity, but that it could increase the length of exposure to take clearer pictures but for that you have to post the photos here.

@killem
about driver w610/k550
fix driver v4.85 w610/k550, test the driver

@aashish007
To improve the driver w830 or improve the colors we need to post the photos without photos without data not know how it is behaving the functions.
Let's stop with the driver w830 because we do not have data from nobody and we do not know how this responding sosorry.

Posted by brazuka
About driver w610/k550

We have removed the property super color because of the effects is not responding as estilumlos, that the property effect blocks any function implemented in it, with all that the driver is color saturated with the color and that was not our idea.
The property effect is different and works with its functions and table already set not accepting stimuli other functions.

Posted by amnher

On 2008-02-20 18:18:36, brazuka wrote:
@amnher
about driver w600/w550
The drivers are basically the same to v.goodshot and v5.95 ADCM only the version v5.95 this with the properties for working with frames more fps.
Test driver v5.95 recording videos in the two resolutions but in good conditions of high illumination lighting and post the results here.
The driver is limited to w600/w550 I think this already in its total capacity, but that it could increase the length of exposure to take clearer pictures but for that you have to post the photos here.

@killem
about driver w610/k550
fix driver v4.85 w610/k550, test the driver

@aashish007
To improve the driver w830 or improve the colors we need to post the photos without photos without data not know how it is behaving the functions.
Let's stop with the driver w830 because we do not have data from nobody and we do not know how this responding sosorry.

Will I test gooddarkshot driver?or 5.95? or both?Or take screenshots of both?
What will I test now?What version?so i can help you. ANd what shall I test with the driver?pictures?or videos?

[ This Message was edited by: amnher on 2008-02-20 22:49 ]

[ This Message was edited by: amnher on 2008-02-21 01:21 ]

Posted by brazuka
News Release

Sony Ericsson w610/k550

Version v4.86 Triple SSS:

Features v4.86_Standard™

Implemented some properties of k810:
-Image stabilization
-Snapshot operation
-Check if flash needed
-Get EXIF
-New Exposure
-More Stable Scenes

Last Version: v4.86_Standard™

Features v4.86_Searchlight™
Implemented some properties of k810:
-Image stabilization
-Snapshot operation
-Check if flash needed
-Get EXIF
-Scene Sports Stable

Last Version: v4.86_Searchlight™

Features v4.86_SuperNatural™
Implemented some properties of k810:
-Image stabilization
-Snapshot operation
-Check if flash needed
-Get EXIF
-SuperNatural™_Color all the scenes

Last Version: v4.86_SuperNatural™

Download:post#12

Sony Ericsson w580

Serie Version v4.17

Features Version v4.17_Standard™

- Standard_Mode
- Added properties Image stabilization/Photo metering/Mirroring Macros

Last Driver v4.17_Standard™

Features v4.17_Vivre Couleurs™

- Vivre Couleurs™
- Added properties Image stabilization/Photo metering/Mirroring Macros
- Color_CC Color Correction

Last Driver v4.17_Vivre Couleurs™

Download:post#9

[ This Message was edited by: brazuka on 2008-02-21 18:37 ]

Posted by amnher

Posted by killem
v.4.86 K550/W610

Implemented some properties of k810:
-Image stabilization

This feature will not work because it is not implemented in firmware!!!

Posted by brazuka

On 2008-02-21 11:46:53, killem wrote:
v.4.86 K550/W610

Implemented some properties of k810:
-Image stabilization

This feature will not work because it is not implemented in firmware!!!

Firmware has nothing to do with it, which responds with actions is the hardware, and sensor chip

Posted by amnher
Sir what will be done for w550i in order to fix the crooked images of gooddarkshot and adjust its brightness?

Posted by amnher
Hope we can improve the gooddarkshot cam driver

Posted by brazuka

On 2008-02-22 02:04:09, amnher wrote:
Hope we can improve the gooddarkshot cam driver

We not understanding? What is the difference driver goodshot the photos to v5.95 ADCM?
You tested the videos friend with the driver ADCM as he had requested?
Do you think you need more than Brightness in the pictures???
Do u read the others posts??

Posted by brazuka
about driver w600/w550

The driver w600/w550 is limited, I think that came in your total limit on the original driver, I think they improve something but the noise can not eliminate because it is part of the composition of a photo, which can be soften the noise with some techniques.
Amnher u can choose any driver but the driver w600/w550 in my opinion is finished... test again the video recording with high ligth day ligth whatever but test.

Posted by brazuka
About driver w600/w550

If u want to change the values for EXPOSURE and BRIGHTNESS, change the values here.... remember the numbers always in hexadecimal

ex. $f BC [40 00]; // EV normal +/- 0 initial exposure

[xxxx]=change the values in HEXA
[40]=[64]
HEXA=NUMBER

Increase in values greater time of exposure but the hardware supports up to a limit of exposure

//==================== BRIGHTNESS PROPERTY ====================
seq_set_prop_0_0 =
$f FE 02
$f BC 01 00; // EV -3.0

seq_set_prop_0_1 =
$f FE 02
$f BC 04 00; // EV -2.7

seq_set_prop_0_2 =
$f FE 02
$f BC 08 00; // EV -2.3

seq_set_prop_0_3 =
$f FE 02
$f BC 10 00; // EV -2.0

seq_set_prop_0_4 =
$f FE 02
$f BC 18 00; // EV -1.7

seq_set_prop_0_5 =
$f FE 02
$f BC 20 00; // EV -1.3

seq_set_prop_0_6 =
$f FE 02
$f BC 28 00; // EV -1.0

seq_set_prop_0_7 =
$f FE 02
$f BC 30 00; // EV -0.7

seq_set_prop_0_8 =
$f FE 02
$f BC 38 00; // EV -0.3

seq_set_prop_0_9 =
$f FE 02
$f BC 40 00; // EV normal +/- 0

seq_set_prop_0_a =
$f FE 02
$f BC 58 00; // EV +0.3

seq_set_prop_0_b =
$f FE 02
$f BC 62 00; // EV +0.7

seq_set_prop_0_c =
$f FE 02
$f BC 78 00; // EV +1.0

seq_set_prop_0_d =
$f FE 02
$f BC 88 00; // EV +1.3

seq_set_prop_0_e =
$f FE 02
$f BC 99 00; // EV +1.7

seq_set_prop_0_f =
$f FE 02
$f BC A9 00; // EV +2.0

if u want more brightness maybe increase gamma, contrast, hue, WB...

Good luck and read the post please

[ This Message was edited by: brazuka on 2008-02-22 02:02 ]

Posted by amnher
So w/c driver is better to use? ur driver or this?

Posted by amnher
im sorry if I didnt understand cause im still noob in this part thats why im studyng this

Posted by amnher
Im sorry if Im kinda confused cause I dnt know which driver you are pointing out. If it is 5.95 ADCM 38855 or Goodadarkshot.

Ill try again 5.95 ADCM and Gooddarkshot and post results here.

Posted by killem
v.4.86 for K550/W610
All photos taken with moderate lighting daylight lamps

Auto

Auto with flash

Auto

Auto with flash

Macro

Macro with flash

Posted by amnher
Oh my cant upload pictures the phone has problem can be detected by my PC USB not recognized.

ANy solutions?