Posted by phekwei
so is there any improvement which can be made ?
such as wat kind of mode should i use in my normal lighting room or at outdoor during afternoon ?
Posted by fisherman10
for MHQ2.37, when u start camera, increase the exposure to +2.0.
that will use the MHQ auto ISO. then it'll be bright.
Posted by rave06
1.37
here is my result whit maximum iso 1.7
macro+flash
idea fpr 38
normal mode 90 not 85
auto mode -> auto iso
thx
[ This Message was edited by: rave06 on 2008-01-31 20:35 ]
Posted by phekwei
On 2008-01-31 17:39:37, fisherman10 wrote:
for MHQ2.37, when u start camera, increase the exposure to +2.0.
that will use the MHQ auto ISO. then it'll be bright.
i tot that will make the picture very blur ?
as sonarikk510 said...ISO higher than 250 will be blur ?
confused now...wat does ISO stands for actually ? sry i'm really newbie at this kind of thing
Posted by sadeghi85
Read this thread to the end, you'll learn something.
Posted by fisherman10
On 2008-02-01 04:19:44, phekwei wrote:
On 2008-01-31 17:39:37, fisherman10 wrote:
for MHQ2.37, when u start camera, increase the exposure to +2.0.
that will use the MHQ auto ISO. then it'll be bright.
i tot that will make the picture very blur ?
as sonarikk510 said...ISO higher than 250 will be blur ?
confused now...wat does ISO stands for actually ? sry i'm really newbie at this kind of thing
dun worry, ISO wont make your pictures blur. ISO is the sensitivity of the sensor towards light.
Posted by SonarikK510
Values of ISO, which higer than 250 (320, 400, 500, 800, 1000) were blured by effect of reduction of noise! This is feature of firmware!
I think, disable this effect are IMPOSSIBLE!
Posted by sadeghi85
Can you force ISO to not higher than 250 then?
and for 'sports' scene to 100?
it'll be darker but with less noise, i prefer less noise.
Posted by one love
I have an idea for a developer:
1. Dont modify the original driver values
2. Modify only the fps...
3. Make better automatic settings
Posted by soheilsh
On 2008-02-01 21:24:47, one love wrote:
I have an idea for a developer:
1. Dont modify the original driver values
2. Modify only the fps...
3. Make better automatic settings
hi
its make
hi boys
iam relaese best cam driver for w610 and k550
shot is original by sony ericcson 2.3 CAMDRIVER + video record with mr sonnarik 2.38 (SVR mode 21.5 FPS )!!!!
enjoy it
http://www.4shared.com/file/3[....]h.html?dirPwdVerified=357e5207
Posted by rave06
On 2008-02-01 18:26:57, SonarikK510 wrote:
Values of ISO, which higer than 250 (320, 400, 500, 800, 1000) were blured by effect of reduction of noise! This is feature of firmware!
I think, disable this effect are IMPOSSIBLE!
hi mr sonarikk can u patch in 1.38 automode to auto iso?
and the compresion normal from 85 to 90?
i love ya driver
Posted by phekwei
guys, i'm having a very serious problem with my camera
recently i just updated to 2.37 without orange color...and this is wat happens
notice that there's a black line at the right side of the picture...
i tried every single ways to solve it...by changing into previous 2.37, 2.36 alpha and final...every single mode such as twilight landscape portrait, macro and infinity mode, with or without solarize effect, and this black line is still there
so anyone can help me solve this problem ? thanks in advance
Posted by kheopstr
sorry mate this problem is serious one.
some users had this problem. solition is only getting it to servis.
Posted by number1
the black line seems to be a common problem with some k550i send it to sonyericsson and get the cam module replaced.
Posted by phekwei
serious problem...oh my god..i'm dead meat this time
do u guys know wat is the cause of this problem ?
Posted by mundix
phekwei it's a permanent hardware damage that needs to be replaced at SE Service center..
my girlfriend's phone had that line, even without no such modifications of the phone and the camdriver
Posted by kheopstr
i think the because of the installing cam driver after flashed to w610i
Posted by phekwei
On 2008-02-04 13:16:48, mundix wrote:
phekwei it's a permanent hardware damage that needs to be replaced at SE Service center..
my girlfriend's phone had that line, even without no such modifications of the phone and the camdriver
so did ur girlfriend sent her phone to SE service center ? if yes, how long does it take ? a month ?
Posted by Coquito
On 2008-02-04 14:34:54, kheopstr wrote:
i think the because of the installing cam driver after flashed to w610i
i think is beacuse that too
my k550i was ok after i do that :s
i take it to a service center and they will replace my phone for free
( for the warranty thing)
this is a ex picture:
Posted by phekwei
what if my phone's warranty is over...how much will it costs just by replacing it ? lol...
Posted by Coquito
i dont know really, you have to take to a service center and ask
Posted by rave06
hey mr sonarik great whit the new interface but i want to translate in german
can u give me all what i need to do it? [PM]
cant wait 4 it
Posted by SonarikK510
New version is avalaible
Posted by pohuman
Thank you SonarikK510.
Posted by pohuman
Disappoint..! Very bad 2.38 A and 2.38 B.. Macro mod no auto focus.. Sorry I very bad speak english..
Posted by brazuka
@pohuman
I donīt think it is bad to v2.38, the idea of sonarik to separate the scenes through the features of the environment is good but needs to be adjusted to the time shots,EV,WB some scenes... and revise the colors for certain scenes.
I think sonarik is working well and all help will be welcome.
Posted by stein
please make a gfx patch for W610i R8BA024
[ This Message was edited by: stein on 2008-02-09 13:17 ]
Posted by pohuman
Phone: W610i
Original 2.3
Most High Quality 2.37
Number1 beta2
Original 2.3
Most High Quality 2.37
Number1 beta2
Original 2.3
Most High Quality 2.37
Number1 beta2
Original 2.3
Most High Quality 2.37
Number1 beta2
[ This Message was edited by: pohuman on 2008-02-09 16:55 ]
Posted by mundix
hey sonarikk510! good job! any way, can you port the graphics interface for the R8BA024 firmware?
Posted by omar_alex01
how can i select the live-colours in 2.38, without have installed the patch??? it's the same way as the the 2.37?
Posted by stevensteady
omg.. i nid help.. hw 2 install da patch? i've read da tut.. but still nt very confident.. is it use da quick access? will it spoil my fonz? can sum 1 guide me? thx.. and sry for my bad english
Posted by fisherman10
@sonarik
macro mode in 2.38 no good.
macro in 2.37 is gud.
pls change back to advanced macro
_________________
K550@W610
My own acoustic mix
Sonarikk's cam driver
www.rfkw.blogspot.com
[ This Message was edited by: fisherman10 on 2008-02-11 16:30 ]
Posted by akapu
Please make the patch for W610 R8BA024......... and give GFX icons with that.......
Please.........
Thanks.........
Posted by 19kimera82
Hi!can u post a link for download the original and official k550i camdriver??
Thanks for answer!!
Posted by kheopstr
can someone put the photos taken by 2.38?
Posted by brazuka
@19kimera82
You can extract any driver original file FS by using programs that support the model.
kheopstr
Post a photo u with the driver and say how this
Posted by killem
Macro 2.38:
Macro 2.37:
Posted by stevensteady
yup... agree, v.2.37's macro is better.. can i ask smth? i edit da sharpness.. i changed all to 08 which is da maximal.. will it look sharper?
Posted by pohuman
Most High Quality 2.38 - A Version
Most High Quality 2.38 - B Version
Orjinal 2.3
Most High Quality 2.37
Posted by fisherman10
@sonarik
as u can see on the test pics, MHQ2.37 has better macro.
pls put 2.37 macro into 2.38 driver.
thx
Posted by 19kimera82
Thks Brazuka! But which program do u use for extract k550i FS and how can i use it??
Can u give me that FS with an email??
my email is: dragon982@libero.it
Thank u so much!!
Posted by akapu
On 2008-02-12 23:10:03, 19kimera82 wrote:
Thks Brazuka! But which program do u use for extract k550i FS and how can i use it??
Can u give me that FS with an email??
my email is: dragon982@libero.it
Thank u so much!!
Follow the instructions............
http://akapu.wordpress.com/2008/01/25/extracting-fs/
You can easily extract FS.......
regards
akapu
Posted by bodyslam
my camdrive is SonarikK510's camdrive (modify myself)
sorry, I don't nice speak English
http://www.uploadtoday.com/do[....]7c5b625ebaa0fc6c7b3dd818f3a591
Posted by SonarikK510
How to fix a error with Macro
Open camdriver, find this
seq_set_prop_9_0=#SET_REG(46,0);
seq_set_prop_9_1=#SET_REG(46,1);
seq_set_prop_9_4=#SET_REG(46,4);
seq_set_prop_9 = #SET_REG(46,%0);
and replace it to
seq_set_prop_9_0 = #SET_REG(46,00);
seq_set_prop_9_1 = #SET_REG(46,01);
seq_set_prop_9_2 = ;
seq_set_prop_9_3 = ;
seq_set_prop_9_4 = #SET_REG(46,04);
Posted by soheilsh
On 2008-02-14 17:04:51, SonarikK510 wrote:
How to fix a error with Macro
Open camdriver, find this
seq_set_prop_9_0=#SET_REG(46,0);
seq_set_prop_9_1=#SET_REG(46,1);
seq_set_prop_9_4=#SET_REG(46,4);
seq_set_prop_9 = #SET_REG(46,%0);
and replace it to
seq_set_prop_9_0 = #SET_REG(46,00);
seq_set_prop_9_1 = #SET_REG(46,01);
seq_set_prop_9_2 = ;
seq_set_prop_9_3 = ;
seq_set_prop_9_4 = #SET_REG(46,04);
thanks mr sonnarik
2.38 Link for download and FIX Macro
http://www.4shared.com/file/3[....]8.html?dirPwdVerified=357e5207
Posted by stevensteady
could sum1 post hw's da look of da new interface?
Posted by khli2001
i want to ask the Graphic interface does it work with k550 R1JD001
Posted by lunaticzz
Is it worh to use 2.38 fixed driver instead of 2.37
i have 2.37 now
Posted by pohuman
Comparative:
Auto: 2.37
Night Landscape: 2.37
Night portrait: 2.37
Landspace: 2.37
Portrait: 2.37
Beach/Snow: 2.37
Macro: 2.37
Sports square: 2.38
Video: 2.38
Posted by SonarikK510
i fix some errors in 2.38
Now you can download fixing 2.38.
Link is also previous