Posted by DarKMaGiCiaN
On 2008-06-22 21:05:57, Duran wrote:
...................................
the camera
driver
is
the
same
I know
but as I know firmware effect of the camera quality as will
Posted by Duran
On 2008-06-22 21:13:30, DarKMaGiCiaN wrote:
On 2008-06-22 21:05:57, Duran wrote:
...................................
the camera
driver
is
the
same
I know
but as I know firmware effect of the camera quality as will
how?
Posted by masada1971
On 2008-06-22 20:57:44, DarKMaGiCiaN wrote:
I have R1FA035 ( I just updated my k850 today )
first thing I tested was the camera and the red color
so I took a pic of a fake red rose
see the result
NOTE:
all AUTO except the ISO set to 100
[ This Message was edited by: DarKMaGiCiaN on 2008-06-22 20:00 ]
thats really good news to see and hear!!can anybody else confirm this??
Posted by shernon8
any idea if APAC-ANZ update will be released tomorrow?
Posted by sniper_supra
shernon8:
any idea if APAC-ANZ update will be released tomorrow?
i'll try updating when i get home from work and see if our beloved APAC is out...
Posted by plankgatan
different firmwares but same cam driver makes different.
example 031 and (new) 037 have same cam driver, but it as well produce different quality (not big different, but still different).
a other thing who is different between firmwares is the flash sync (but it have same cam driver)
_________________
I
K850,
W810 & ------------------------------------
http://www.flickr.com/photos/21179102@N07/
(t610, t630, k700, k750, k800, k810)
[ This Message was edited by: plankgatan on 2008-06-22 21:31 ]
Posted by EARNEST
I am updating my phone now...R1F is out for western europe
Posted by buntoo
oh GOD.... i just got the second BROD..................
was trying to check for the update... nothing... and when i turned it on it was smiling at me with the blue ring & the keypad lights...
That realllllllllly sucks.......
i'll hv to send it again to the dealer and wait for 1 month to get it back....
sony ericsson is not doing well with us.........
Posted by EARNEST
OK...updated...OMG. SE THANK YOU, finally contacts list is faster! i will check for new improvements.
Posted by sniper_supra
Buntoo:
oh GOD.... i just got the second BROD..................
was trying to check for the update... nothing... and when i turned it on it was smiling at me with the blue ring & the keypad lights...
That realllllllllly sucks.......
i'll hv to send it again to the dealer and wait for 1 month to get it back....
sony ericsson is not doing well with us.........
I really don't understand what causes BROD - it always attack random phones. And sometimes, once BRODed can be BRODed again...
If we can only point out the most common feature of all BRODed phones, maybe we can somehow counter having one.
I haven't experienced BROD, but I am praying that I might not have one.
Mine is R1EA037 APAC, upgraded through service center once.
Posted by masada1971
On 2008-06-22 22:52:49, EARNEST wrote:
OK...updated...OMG. SE THANK YOU, finally contacts list is faster! i will check for new improvements.
check about the pinkish colors on the photos please and flash overexposure and tell us
Posted by mr versatile
This thing is getting more and more disgusting by the days why cant we be happy for a while, this BROD thing come like heart attack knows when their heart will give out.
@buntoo sorry to hear that once again
[ This Message was edited by: mr versatile on 2008-06-22 22:07 ]
Posted by DarKMaGiCiaN
On 2008-06-22 21:22:16, Duran wrote:
On 2008-06-22 21:13:30, DarKMaGiCiaN wrote:
On 2008-06-22 21:05:57, Duran wrote:
...................................
the camera
driver
is
the
same
I know
but as I know firmware effect of the camera quality as will
how?
I dont know how
but in K750 I used to use my 0.92 camera driver in r1ca021
when I changed the frimware to R1B the quality changed even I used the same camera driver
we discussed that in one of the K750 thread
^_^
Posted by DanGrover
I have found the performance (specifically texting with T9 whilst listening to media as mentioned above) considerably better with F35. I have no scientific means of testing, but certainly it doesn't seem a whole lot slower than it used to even when not using the media player. To me, this was the biggest performance issue, as I often found myself doing those two things together.
Debranded Western Europe.
Posted by EARNEST
On 2008-06-22 23:01:11, masada1971 wrote:
On 2008-06-22 22:52:49, EARNEST wrote:
OK...updated...OMG. SE THANK YOU, finally contacts list is faster! i will check for new improvements.
check about the pinkish colors on the photos please and flash overexposure and tell us
Cannot do it now, it's night here, sorry
Posted by Coquito
Night is the prefect environment to test the flash, I think.
________________
[ This Message was edited by: Coquito on 2008-06-22 22:34 ]
Posted by Orcmors
I really don't understand what causes BROD - it always attack random phones. And sometimes, once BRODed can be BRODed again...
If we can only point out the most common feature of all BRODed phones, maybe we can somehow counter having one.
I haven't experienced BROD, but I am praying that I might not have one.
Mine is R1EA037 APAC, upgraded through service center once.
There is a theory regarding bad firmware upgrade strategies when upgrading at home. (Fault lies with the firmware engineers not end users) Not sure if that's true. Personally I've never upgraded my firmware and never gotten a BROD. *touch wood*
I did noticed something regarding the restarts though. When using a light theme like harry20larry's "Tell Me" I get restarts once in a blue moon. But if I switch to a more resource intensive theme like the built in "Laser precision"(Flash Menu, accelerometer utilizing wallpaper), I get restarts almost everyday.
Posted by vegetaleb
Geez you were ready to upgrade to a ''probably'' BROD free and you got BROD!?!
This is really awfull!
No body got the BROD yet with R1F?
I think BROD is caused by a corrupted system file most probably the display driver,because when you turn on a K850 ,right after the keypad is enlighted(step where it freezes with BROD) the display is activated then 1 sec later the sound...
[ This Message was edited by: vegetaleb on 2008-06-22 23:08 ]
Posted by EARNEST
So...phone is much faster. Even mass storage mode activates faster.
All photos are made in standard settings, photo quality is fine. forgot how to switch night mode on :-/
http://img95.imageshack.us/img95/4963/dsc00323os4.jpg
http://img78.imageshack.us/img78/3177/dsc00321bz5.jpg
http://img410.imageshack.us/img410/3294/dsc00320zs0.jpg
http://img242.imageshack.us/img242/369/dsc00317fg3.jpg
[ This Message was edited by: EARNEST on 2008-06-22 23:27 ]
Posted by Duran
Twilight landscape = nightmode.
But you're better of using Twilight portrait
Posted by Ngelih
@earnest
i'm sorry....
but i think the result of those photos are not good enough
stay the same with R1EA037
overbright + no detail
thanks
sorry.....
Posted by Prom1
I too updated (actually Unbranded from the Rogers Wireless firmware).
Nicety's that I didn't have with the Rogers Firmware:
* Better WebPage (SE in memory)
* Sounds & Alerts: Key Response - vibration available for touch keys.
* Calls: Smart Search
* Security: Automatic Keylock (my GOD I'm so happy I can disable this stupid thing when I don't need it)
* Messaging: Web Feeds (YES FINALLY!) - however the standard 5 do not update
can do this with existing technologies, while Motorola waists money and tried to market this same thing with providers. They called it something (only AT&T has the server for this).
I haven't seen anything else new, though.
Of note I'm having a problem accessing the full HTML page of Esato. I really want to do this so that I can have the RSS Feed set. Not like I need to save data any longer thanks to my plan but its STILL more efficient.
Posted by egg0waffle
hi guys, i still dont have the 035 fw.. anyone else in HK have it? HONG_KONG_SO isnt the ASIAN-LEVAN version right?
Posted by Hiron
I think APAC-ANZ_FS delayed because they didn't finish SO_CHINA_MAIN yet...
The other FS here (such as Western Europe, Adriatic) using GENERIC_MAIN firmware...
I just get a BROD (firmware rev R1EA037.) Sent it to SE Service Centre and must wait 1 months (that's 30 days!) to get my new K850i. They replaced the old ones.
It's funny because they said that it can't be fixed with EMMA (official SE flasher). But why third party programs (like DaVinci and KulanKendi) can fix BROD?
I just think a correlation between BROD and touchkeys vibration usage...
I never get a BROD before. Just one hours after I tick an option to vibrate phones when touchkeys pressed... BAM! It's get a BROD!
This new feature added since R1EA031:
Key response menu in Settings -> Sounds & alerts, allowing the selection of sound or vibrate when pressing the touch sensitive buttons.
I asks to everbody here that get BROD, did you use this feature or not?
Posted by alekhkhanna
^ ^ hell yes!!.. I was using the vibration feedback when i got BROD.. But since then stayed on 029.. ie until now..
Somebody posted about BROD on 035 some pages before.. Is it true.. Any sources??
[ This Message was edited by: alekhkhanna on 2008-06-23 05:34 ]
Posted by Tervel
Hiron, you might be onto something but I think people had covered it a few months back. Non the less I do recall using the touch vibrate as soon as it became available on 031 and I BROD-ed pretty quickly. Problem is, the 2nd time my phone BROD-ed it was just sitting on a desk and I just heard it do a little vibrate and I just KNEW that it had reboot/BROD-ed, sure enough that was the case. I flashed to R1CA037 and stayed there until a week ago when I put R1FA035. Just as a precaution I did not turn on the vibrate touch buttons and so far ( knock on wood ) I've been fine. I have spoken to a guy who deals with fixing broken (read mis-flash, crashed, brod etc) phones, who was able to recover my K790 after it was butchered by Wotan, and he told me that he believes that BROD is associated with corrupt files during the flash process.
Posted by maaz2020
MY earlier post about the leaked so called XS++ 3.2 Ultima is actually the earlier leaked crystal version,i just checked it and there r some new posts...
Posted by harry20larry
On 2008-06-23 06:00:16, Hiron wrote:
I think APAC-ANZ_FS delayed because they didn't finish SO_CHINA_MAIN yet...
The other FS here (such as Western Europe, Adriatic) using GENERIC_MAIN firmware...
I just get a BROD (firmware rev R1EA037.) Sent it to SE Service Centre and must wait 1 months (that's 30 days!) to get my new K850i. They replaced the old ones.
It's funny because they said that it can't be fixed with EMMA (official SE flasher). But why third party programs (like DaVinci and KulanKendi) can fix BROD?
I just think a correlation between BROD and touchkeys vibration usage...
I never get a BROD before. Just one hours after I tick an option to vibrate phones when touchkeys pressed... BAM! It's get a BROD!
This new feature added since R1EA031:
Key response menu in Settings -> Sounds & alerts, allowing the selection of sound or vibrate when pressing the touch sensitive buttons.
I asks to everbody here that get BROD, did you use this feature or not?
Fraid I can't back this up, I got a BROD whilst it was in pocket, however I did have haptic feedback on. When I reflashed to EA037, I did not turn them on, I didn't have one restart...
hmmmm, wonders to self when the first post will be updated?
[ This Message was edited by: harry20larry on 2008-06-23 06:56 ]
Posted by SupermansZ24
My friend got BROD a couple hours after he updated to R1EA031. He turned on the touch sensitive vibrate feedback as soon as he updated.
Wow, this is just bizarre.
Posted by iqmaster158
just to share my experience with BROD, ive got none so far. i have k850 for 7 months, i use SEUS every time a new FW show up. normal usage (few drops from pocket, dust behiind lenscover), key vibration on, i am not using mp3player though. seldom restarts but almost always during fast viewing pictures in media. i can say i am satisfied. camera is not what i expected but i love the design even after 7 months.
Posted by bahraini
well, ive update it last night
mine so far so good
i noticed those changes
- really fast media player
- the menu in general got faster
- pictures now have better quailty and colors are better
- with flash when using iso 100, and -7 brightness, gives me really better pictures than before..
- in media player setting, there is something new called auto update
by the way, i have 2 things i wanna ask..
wat is BROD??
is there any diffrences in FW versions between asian , middle easr, europian??
i thought its only the langaues change, but when i read about phones problemd, not only K850, many og them ppl dont have it here, but they have other problems??
Posted by JiSm
How can they not fix this intense flash? I mean, just dumb it down a bit for Macro setting. If I wanted a big white picture I would take a photo of my ass.
Posted by StuMcBill
Finally managed to get the USB drivers installed (using a Virtual XP Installation).
Still no update for O2-UK!
Stu
Posted by sniper_supra
still nothing for APAC-ANZ...this is nuts...
I'm starting to become impatient...
Posted by catalinux
No update available for HONG_KONG_SO, checked 1 minute ago.
Posted by vegetaleb
So ''till now'' this R1F seems to be BROD free
Still I will wait to the 30th of June before updating
Posted by Duran
What if you get brod on your old fw before 30june=p
i was happy i could switch to a new fw..and get rid of 031 and 037
[ This Message was edited by: Duran on 2008-06-23 11:26 ]
Posted by vegetaleb
I am with a safe FW right now...the old good 037!
Posted by buntoo
@vegetaleb
i think it was you who advised me to upgrade to --EA031 from --CA037.. and u're still on that old firmware and i've experinced two BROD's...
anyhow... now i'll have to suffer some time till it get repaired again..
Posted by JaffaTB
my phone BROD'ed over night, i left it beside the bed and woke up and it was off, turned on to find a BROD, i didnt have the vibrate key settings activated
Posted by vegetaleb
@Buntoo I don't remember that I was advertising the 031 FW,and if I was it's because AT THAT TIME BROD was not very common even with 031,I upgraded to 031 and I personally got BROD with the FW 031 but after 1 month in the middle of a travel in Paris,it took me 1 month to repair it because I losed too much time with SE centers,then I flashed it with the old 037 with KK and since then I am waiting for a new BROD free FW.
@Jaffa It Broded with the FW R1F???
_________________
Prince Vegeta,prince of all sayans
[ This Message was edited by: vegetaleb on 2008-06-23 12:57 ]
Posted by -Ryan-
Looking forward to the O2 update...
Posted by cableguy
On 2008-06-23 15:13:12, -Ryan- wrote:
Looking forward to the O2 update...
Hope you are not waiting for an O2 Ireland update !!
Posted by EARNEST
So... what i noticed with new FW
1. Much faster. Everything. But still not perfect. E.g. try to type in contact list some name ( DEN etc), it is quite slow.
2. Icons for saved URL was changed (now it is a star). But favorites still cannot be opened. The one i saved on pc and transfered to my phone - not working, cannot open them.
3. Auto update in player - to reset songs and re-find them again ALA restart the phone = auto update does same..re search for all media files.
4. I still don't have icons for HSDPA .
5. Photos quality at night did not change.
6. Day light photos are nice.
7. .....
Posted by terahybrid
no apac anz yet, damn sony it better be BROD free
does someone knows if KK has uploaded it yet
Posted by kenjibatusai
Using Phone XS++ and connected my phone this info came out in the log.
10:26:35| XS++ v3.2 Dev1 (Crystal) Ready !
10:26:35| Executed on Microsoft Windows XP
10:26:50| Baseband ID: C802
10:26:50| Protocol Version: 4.1
10:26:50| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K850)
10:26:50| ...using GDFS name
10:26:50| Profiling SEMC phone...
10:26:50| Platform: DB3150
10:26:50| OTP CID: 52
10:26:50| EROM CID: 52
10:26:50| EROM Color: Red
10:26:50| IMEI: 35182902xxxxxx
10:26:50| Phone ID: K850
10:26:51| Region: AMERICA
10:26:51| CDA: CDA12345678/123 R11A
10:26:51| Firmware Version: R1EA037
10:26:51| EROM: 1200-4341 SEMCBOOT R6A008
10:26:51| Ready for operation!
10:27:06| After making any changes with FSX
10:27:06| you must press the 'Shutdown' button
10:27:13| Sorry, your phone is NOT SUPPORTED
10:27:13| Error: FSX failed.
10:27:13| FSX Shutdown!
10:27:15| Disconnected... Unplug the phone
With this info, will SEUS update it or not???
Posted by 0kti
On 2008-06-23 17:27:24, kenjibatusai wrote:
Using Phone XS++ and connected my phone this info came out in the log.
10:26:35| XS++ v3.2 Dev1 (Crystal) Ready !
10:26:35| Executed on Microsoft Windows XP
10:26:50| Baseband ID: C802
10:26:50| Protocol Version: 4.1
10:26:50| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K850)
10:26:50| ...using GDFS name
10:26:50| Profiling SEMC phone...
10:26:50| Platform: DB3150
10:26:50| OTP CID: 52
10:26:50| EROM CID: 52
10:26:50| EROM Color: Red
10:26:50| IMEI: 35182902xxxxxx
10:26:50| Phone ID: K850
10:26:51| Region: AMERICA
10:26:51| CDA: CDA12345678/123 R11A
10:26:51| Firmware Version: R1EA037
10:26:51| EROM: 1200-4341 SEMCBOOT R6A008
10:26:51| Ready for operation!
10:27:06| After making any changes with FSX
10:27:06| you must press the 'Shutdown' button
10:27:13| Sorry, your phone is NOT SUPPORTED
10:27:13| Error: FSX failed.
10:27:13| FSX Shutdown!
10:27:15| Disconnected... Unplug the phone
With this info, will SEUS update it or not???
not becouse you have wrong CDA
Posted by kenjibatusai
On 2008-06-23 17:31:17, 0kti wrote:
not becouse you have wrong CDA
What can I do to fix this????
Posted by Ngelih
can k850 used in xs++ 3.2 ?
thx
Posted by Alfaro
On 2008-06-23 18:08:26, Ngelih wrote:
can k850 used in xs++ 3.2 ?
thx
XS++ can recognize and show the information of the K850, but that's only it.
On 2008-06-23 17:37:07, kenjibatusai wrote:
On 2008-06-23 17:31:17, 0kti wrote:
not becouse you have wrong CDA
What can I do to fix this????
You can change your CDA via Davinci or other paid service. Or wait for the firmware become available for your CDA.
[ This Message was edited by: Alfaro on 2008-06-23 17:26 ]