Posted by reywal
im currently using V2 HI FI and quite satisfied with it especially when using earphones. the only problem is that while playing mp3 songs without earphones, only the back speaker works. the front speaker does not.
im using k800i R1K firmware. any idea sir PEDROPS?
i noticed the same problem when i tried your monster bass. thanks!
Posted by pratssd5
hi peter ,
i used ur hpm70 v2beta 3 and the sound quality
has improved a lot on my w610i.
really appreciate ur work .
can u suggeest me an ascoutic which will give
very deep megabass in my hpm70 headsets ????
thanks.
Posted by BanditNN
On 2008-01-03 23:31:35, pedrops wrote:
Hi Bandit, there are more people using EP-630! And I consider this as a HiFi earphone.. so the best acoustics would be HiFi version 2.
BTW, wich firmware are you using?
Oh, you are russian?
Can you do me a favor? I have a site where my acoustics are mentioned, but its in russian.. can you translate it for me? or just to know what they are talking about =]
Greetings, pedrops
Really, it is necessary to try HiFi version 2 for ear-phones Creative EP-630, now I will be engaged in it.
My firmware - K790_R1KG001.
And as to transfer - write a direct link on a material, I will translate
Posted by danielhuynh2
@pepdrops
have u got a link for farfield and if u have . have u used it and if u have do u need to flash ur phone after ? using xs++ ?
Posted by orei
Hi my friends!!! and.. hi peter!!
with all these acousticdriver.. in my k770..i have too much noise.. a whistler during the call without the headphones..
why this?
if i use the original audio driver.. everithing is ok.. but i want a best audio for my song.. and for the ringtone!!!
What is the file for the audio during the call without headset and without the high speaker? the file for the normal speaker i mean.. because.. i can keep the original file for that situation.. and change the other.. what do you raccomanded to me?? (sorry for my bad english..
)
thanks a lot
[ This Message was edited by: orei on 2008-01-05 14:57 ]
Posted by lukey1984
Hey all
at the begining i would like to say that i'm a total nebie when it comes to changing drivers and such stuff in phones, so i want to ask You for help.
I have a W610i phone and would like to install some drivers, to make the sound better (the headphones sound is nice, but the speaker sound is a bit bad ;P ). so i need help..in :
- how to install drivers ?
- which drivers would suit my phone the best ?
thanks in advance for help
greetings from Poland
Posted by geroldbravo
i refer modding acoustic drives using xs++ 3.1... it's because you can drag and drop files there.... it's easy.. but don't know what driver suits you best...
Posted by ocean21
help me
Posted by hristijan90
Does anybody know what do this names mean?
1.BDSS
2.BT
3.BTC
4.BTL
5.BVHF
6.DSS
7.farfield
8.LO
9.PHF
10.TTY
11.VHF
Thnx
Posted by DeKosta
Tried your drivers today and im very satisfied with the results! Very good sounddriver you produced!
Next step is to get a better headset.
Posted by pedrops
On 2008-01-04 01:20:36, ginryu wrote:
yeah i know i think that it's kind of strange too but i think that all the acoustics files work together somehow, sometimes i get better results and some others worse results (depending of the version pack) and some other times after a couple of days the sound just change (more bass or treble) weird
On 2008-01-04 02:52:57, LaurensB wrote:
Awesome! Looking forward to HiFi 2
On 2008-01-04 09:44:33, flaminglips wrote:
can i use it with my t650? if yes which version should i choose?
im using stock hpm-75... thnx in advance...
Think the best for you will be K800 pack, than you have to test MonsterBass and SoftBass to see wich one you prefer!
On 2008-01-04 16:50:10, whitehackker wrote:
@pedrops
super thanks bro!!! i followed your advice i use your latest acoustic to my panasonic dual vent earphone and it sounds great!!!!
and yes the R6 sounds nice also in R1k and R8 acoustics.. more power to you and keep up the Good work
I have created one myself, to use with my Phillips, the sound is still clear, but with and extra bass punch
On 2008-01-05 02:37:31, reywal wrote:
im currently using V2 HI FI and quite satisfied with it especially when using earphones. the only problem is that while playing mp3 songs without earphones, only the back speaker works. the front speaker does not.
im using k800i R1K firmware. any idea sir PEDROPS?
i noticed the same problem when i tried your monster bass. thanks!
really, mine never did!
are you sure about this?
On 2008-01-05 06:34:06, pratssd5 wrote:
hi peter ,
i used ur hpm70 v2beta 3 and the sound quality
has improved a lot on my w610i.
really appreciate ur work .
can u suggeest me an ascoutic which will give
very deep megabass in my hpm70 headsets ????
thanks.
MonsterBass is the one for you, but you'll have to test if the K800 ot the W880 pack is the best for backspeaker on you W610!
k800 = less treble
W880 = treblish and higher volume
On 2008-01-05 14:02:46, BanditNN wrote:
Greetings, pedrops
Really, it is necessary to try HiFi version 2 for ear-phones Creative EP-630, now I will be engaged in it.
My firmware - K790_R1KG001.
And as to transfer - write a direct link on a material, I will translate
Oh, you still using R1? You can try the acoustics for R1KG001 firmware!
They might sound even better than the ones for R8BA024!
I dunno what page it is anymore, but the text is this:
1-
Настройка звука - извините отстой! показанный эквалайзер не правильный! просадка высоких не ощущается (это обычная настройка рок)!.
И достали уже удалять мои сообщения! Не выносите критику значит Вы мягкотелые и дети по разуму!
Хотите послушать хорошие настройки ищите на западных форумах например тут человек делает неплохие настройки уже юзаю http://www.esato.com/board/viewtopic...156540&start=0
2-
выложи сюда эти драйвера мы их заценим все вмести.
3-
легче тебе выложить, а не всем нам туда лезти.
4-
ТОН ПО ПРОЩЕ!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ВСЕ КАЧАЮТ, ТО ЧТО ИМ НРАВИТСЯ! А КРИТИКУ МЫ ВЫНОСИМ, ТОЛЬКО ПИШИ В ЛИЧКУ!!!!!!!!!! ТЕМУ НЕ ЗАСОРЯЙ!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
My guess is something about the equalization we use!
On 2008-01-05 14:06:21, danielhuynh2 wrote:
@pepdrops
have u got a link for farfield and if u have . have u used it and if u have do u need to flash ur phone after ? using xs++ ?
I don't understand you man! You mean reflash MAIN+FS after uploading acoustics?
On 2008-01-05 15:54:13, orei wrote:
Hi my friends!!! and.. hi peter!!
with all these acousticdriver.. in my k770..i have too much noise.. a whistler during the call without the headphones..
why this?
if i use the original audio driver.. everithing is ok.. but i want a best audio for my song.. and for the ringtone!!!
What is the file for the audio during the call without headset and without the high speaker? the file for the normal speaker i mean.. because.. i can keep the original file for that situation.. and change the other.. what do you raccomanded to me?? (sorry for my bad english..
)
thanks a lot
The file you're looking for is handset_0_call.zapf, replace that with the default one
and everything should be fine!
On 2008-01-05 15:57:52, lukey1984 wrote:
Hey all
at the begining i would like to say that i'm a total nebie when it comes to changing drivers and such stuff in phones, so i want to ask You for help.
I have a W610i phone and would like to install some drivers, to make the sound better (the headphones sound is nice, but the speaker sound is a bit bad ;P ). so i need help..in :
- how to install drivers ?
- which drivers would suit my phone the best ?
thanks in advance for help
greetings from Poland
Ok, so, for installing you should search a Guide thread... there are 2 methods, FAR+SEFP and XS++. Search the forum and start practicing!
For w610 I don't really know, but I remember someone said the best is K800 pack.
For backspeaker:
K800 = less treble, good sound
W880 = treblish, higher sound
You should test Wxx and Kxx packs, aswell MonsterBass and SoftBass, and see for yourself wich one do you like most!
On 2008-01-05 16:34:39, geroldbravo wrote:
i refer modding acoustic drives using xs++ 3.1... it's because you can drag and drop files there.... it's easy.. but don't know what driver suits you best...
wow, nice!
I always use FAR.. guess I'm just to familar with that
but now we don't need anymore, there's the move patch
now we can change acoustics faster, oh, and on the fly!!
On 2008-01-06 08:43:01, ocean21 wrote:
help me
On 2008-01-08 22:21:38, hristijan90 wrote:
Does anybody know what do this names mean?
1.BDSS
2.BT
3.BTC
4.BTL
5.BVHF
6.DSS
7.farfield
8.LO
9.PHF
10.TTY
11.VHF
Thnx
Here you'll find that out!
http://forums.se-nse.net/index.php?showtopic=8030
On 2008-01-09 00:54:36, DeKosta wrote:
Tried your drivers today and im very satisfied with the results! Very good sounddriver you produced!
Next step is to get a better headset.
Thanks dude!
Posted by burner8
hi pedrops,
can you please post your patch to get better bass and keeping clear sound.
it would be nice.
thank you, your hifi v2 are the best accoustics soo far
burner8
Posted by BanditNN
Greetings, pedrops.
Yes, in Russia firmware R1KG001 is most extended, and patches will be customised now with it.
As to a sound - yes, really, sound driver HiFi version to 2 me have seemed better.
And more - recently I have installed a patch "Bass" settings change to "Mega Bass", so at its usage a sound even more dynamical, energetic...
patch
| Code: |
;K790 SW-R1KG001 |
Still it would be desirable to add in the driver of the call speaker of the lower frequencies, and there will be practically an ideal
As to translation:
1)
Sound customisation - excuse, nonsense! A figure of an equalizer the wrong! A procorf of high frequencies it is not felt (it is usual customisation fate)!.
Also have got already to delete my messages! Do not take out criticism - means you spineless and silly children!
Wish to hear really good customisations - search at the western forums, for example, here the person does quite good customisations of drivers, already I use
2)
Attach here these of the driver, we will try all of them together.
3)
Easier to you to attach, instead of to all of us on that forum to go
4)
Speak easier!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
All load that is pleasant to them! And we take out criticism, only write to private messages!!!!!!!!!! A subject do not litter!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
If that is not clear - ask, I will explain
Thanks
_________________
[ This Message was edited by: BanditNN on 2008-01-09 20:30 ]
Posted by hristijan90
On 2008-01-08 22:21:38, hristijan90 wrote:
Does anybody know what do this names mean?
1.BDSS
2.BT
3.BTC
4.BTL
5.BVHF
6.DSS
7.farfield
8.LO
9.PHF
10.TTY
11.VHF
Thnx
Here you'll find that out!
http://forums.se-nse.net/index.php?showtopic=8030
se-nse forum doesnt work...can you post the meaning on this forum please? I need it!
thnx a lot
[ This Message was edited by: hristijan90 on 2008-01-09 21:04 ]
Posted by ginryu
@pedrops
yes i'm sure, they're ok so it's strange jeje
Posted by reywal
Yup Sir Pedrops. The front speaker really played music using sound drivers that i have tested though not your own.
Its alright. The music quality of the front speaker is not that good to my ears anyway. hehe..
Posted by bishshoy007
What is DRC on/off ?
Posted by TurtleBot
hello!
i had my k550i w/c was converted into w610i
and i'm planning to flash the main and fs into R8BA024
does the v2 acoustics is better than the w880 acoustic?
does the v2 acoustics produces hissing sounds when played on back speaker?
coz it's kinda tiring to flash and remove acoustics..
sorry if had so many questions..Ü
THANK YOU VERY MUCH! in advance..
to anyone; who'll reply..
Posted by Dennis3
Hey there Ped ,
I own a HPM-82 earpiece and yesterday I got your Acoustic Driver V2 HiFi .
The quality and Loudness is just ... I can't even describe it .. It's just awesome !!
My question is , do I have to download the Call Loudness patch or is it already installed ?
Thanks : )
Posted by zirkie101
It's included in the acoustic and it's not a patch.
@PedroPS
How far is R8 HPM-62 version? And do you recommend that "bass" patch for HPM-62 or shall I just go ahead and try it? I'm using new Hi-Fi mod and it's great for HPM-62.
Posted by Alnis
Hello!
I must be missed something, but can enybody tell in common language, how to install these files on K800? Where to go? What to push?
I'am using mobile as a music source in my car, and not quite contended with sound, especially compared with the one I can get from laptop.
Are these codecs compatible with KD Player?
Posted by nabu28
Finally I found out how to work out XS++ (well some of it).
I love the acoustic drivers, exept for one thing.
I think there is way to much treble in the earpiece. Is there a way, to only change the files for the music-player and nothing else? Which files do I have to not touch, if you know what I mean.
I wanna use Hifi og K800 v1 DRC off.
I've got K810i
Nabu
[ This Message was edited by: nabu28 on 2008-01-10 20:02 ]
Posted by dephanix
Hi guys.
This is great. But before i use these acoustics, is it possible to (how?) backup my W880i's original acoustics? I'm using XS++ btw.
Cheers!
Posted by danielhuynh2
i mean have u got a farfield for k800i
Posted by chestertan20
sir pete do you have a modded acoustics for k610i? my bro wants to update his k610i with your hifi v2. thanks
Posted by Alnis
Ok, I got it.
Lets try out fiber your fabric, Pete
Posted by Alnis
Hmm, I still can not get, how to find those "IFSsettingsacoustic" on K800i through Far. It just shows all those files that can be found normally through USB...
Everybody's enyoing Pedrops acoustics, and I can't - this is frustrating! LOL
But I need this!!! (addicted)
One more question: does this sound pack refere to KD Player too?
[ This Message was edited by: Alnis on 2008-01-12 18:55 ]
Posted by plAythiNG
will this work for me, i am using a brand new red w910i. all i want is for the in spekaer to be louder, cos when i talk normally, i cannot hear the caller very well, and my loud speaker is crap as, is this the program for me?
Posted by agentreza
Hi i know a lot of you have tried peter's mod and by the looks of this forum, it should be great. But how does this mod actually sound? Can any1 of you post a sample audio of the v2 acoustic for the k800i. Would also be great if you could compare the original with the moded 1. Anyways would REALLY appreciate it. THANKS!!!
Posted by wrxratd
what version should i use with k790a with R6BC002
thanks
Posted by K800ii
What would be the difference between the DRC On & the DRC Off?
Thanks Fellas.
Posted by geroldbravo
@K800ii
Peter's HiFi Acoustics
Version 2 for R8BA024 firmware
The best sound for your High Definition Earphones!
For best sound is recommended to use manual equalization, a good eq. setting example is on the pic attached.
Change bass [first bar] as your wish!
DRC = Dynamic Range Compression
http://en.wikipedia.org/wiki/Audio_level_compression
*on - recomended for those who listen at higher volumes
*off - recomended for those who listen at moderated volumes
if are looking for better explanations on how it affects sounds, please search on my threads.
Se-nse: http://forums.se-nse.net/index.php?showtopic=16379
Esato: http://www.esato.com/board/viewtopic.php?topic=156540
"this is a read me note including in the peter's acoustic that i've download"
hope it helps...
[ This Message was edited by: geroldbravo on 2008-01-13 18:25 ]
Posted by agentreza
is there a way to get this acoustic mod via patch(.vkp file)???
[ This Message was edited by: agentreza on 2008-01-16 00:36 ]
Posted by ap0lo
Olá, Pedro!
Meu cel foi pra autorizada, e me deram um novo.
Já flashiei, e tá um k790a, R6BC002, e comprei um HPM-70.
Eu antigamente usava o beta v3 seu.
Agora, com as novas versões, eu devo usar o HiFi, o Monster Bass K800 ou o Soft Bass K800?
Lembrando que eu quero qualidade, e não explosão.
Valeu!
Posted by ap0lo
Deixa, testei todos e eu mesmo respondo:
Best for K790a w/ R6BC002 and HPM-70 is HiFi.
Posted by ap0lo
I'm sorry for flooding, but, OH MY GOD, Peter's HiFi V2 is FUC*ING AWESOME!
I'm listening here to a large variety of sounds, such as Dandy Warhols, The Used, Foo Fighters, Linkin Park, Jamie Cullum, and this new driver fits all of them perfectly.
I've also found my perfect equalization, and if you'd like me to share it, I'd love to.
Thank you again, Peter, and I'm astonished, marveled, overwhelmed with your work.
=]
Posted by bigmann77
how do i get this stuff onto my s500i?? i installed one already... but i wanted tthat drc stuff on it... lol can anyone help?? also will this work on w810i??
Posted by fizzy15
i using HPM-82... from walkman series phone with remote..
problem is the sound is to loud even in the lowest volume..
i enjoy the bass though..
Posted by theshadow03
hey PETER...when will you release the new acoustic drivers if there are any???
thx
Posted by molis
Great job man!
Posted by bigmann77
can anyone help with my post...??
Posted by mpasanthosh
Great Job Dude..
Hope there wil be a new version release of yuors...
I hve been a fan of urs from te beginin..
Urs the top of all acoustics i have tested so far..
Thnks
Posted by dephanix
Hey!
Just to say I'm using the W880i v2 Monster Bass acoustics at last! Really happy with the results!! THANKS!
Posted by pratssd5
hey peter ,
ur monsterbass acoustic's gr88888
the bass is very clear in ma hpm 82 & even d loudspeaker's good.
thanks a lot
Posted by notoryuz
any new acoustic driver?
Posted by xnuxer
hi
How to turn drc on/of in peter v2 r8?
Posted by chestertan20
i guess pedrops is not around
Posted by agentreza
is there any1 who can please post a sample audio of peters acoustic mod v2 for the k800i? Really would help a lot as i wanna know if there is any kinda difference from the original acoustics....by the way where is peter???
Posted by ashrack
Hello!
I've been reading through various threads on how to tune the accoustics on K810i.
I did this tutorial:
http://www.esato.com/board/viewtopic.php?topic=162610
But is it possible that I could first backup the ACCOUSTIC files B4 I overwrite them with the ones from this pack? Since in the event of failure I would like to restore the original K810 accoustic files.
Thank you.
Posted by Alnis
Hi everyone,
The Pedrop's accoustics are brilliant. The sound really takes me!
Just one thing. Can enyone tell me, which accoustics has the less bass?
Cause i'm using Softbass edition and the bass is still two times too much even when it is turned off in eqalizer.