K810 firmware in K800, is it possible?

Posted by fallen_angel
what does this mean??
SEtool cannot identify my phone

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35799401984198 CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed:4 secs.

Posted by fallen_angel
what happened to my phone??

when i plug it into Se tool lite and press identify it reads

---------------------------------------
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35799401984198 CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed:11 secs.
----------------------------------------

but when i plugged it in using XS++
it can recognize my phone and when i'm trying to restore my gdfs file it stops at

This is a CHIPSELECT loader
Activating loader...
Activating GDFS...

it also says Sending Applet CSloader on the progress bar..

and it does not go further.. i even left it connected for more than an hour and still there is no progress??

PLEASE HELP!!!

Posted by ejemplo
help???
go to
www.se-planet.com

please, translate for any question

Posted by swr_22
EROM for k800i pls~
someone pls upload the link.........

Posted by alfath
hohoho at last i can cross flash from K800 to K810 yesterday, at first i execute it with xs++ but it did'nt get well and i get what fallen_angel got bout gdfs things...
but somehow i can manage it back i dont realize it well, i do the restore gdfs using xs++ but it stuck on activating gdfs then i press stop, and then i tried using setool samething happen it says that gdfs error... so i i think maybe i just flash the phone using original firmware and it went succesully
then i tried to cross flashing using setool and it went smooth until i finish it.. and now i've patched my phone and it can do blacklist thing and locking the message inbox

Posted by irontech

You must upgrade it to CID 52 before your perform flash the firmware.

Posted by unforgiven_sh
and how can that be done?

Posted by unforgiven_sh
and what is the procedure for downgrading from K810s back to K800s firmware?

Posted by alfath
just reflash ur phone with K800 firmware

Posted by fiqz4ce

On 2008-03-18 11:42:11, swr_22 wrote:
EROM for k800i pls~
someone pls upload the link.........

no need..
just download kkclient...
tick erom..and flash..
then follow the instruction...

where to get kkclient? http://fiqz4ce.4shared.com
go to software..

Posted by [c3]
WOHOW! just fixed my fone, do u guys recommend that i update to 810 FW? im still on CID51,, are there any problems with the K810 on K800? is there an Arabic enabled FW,, for reading n sending text msgs?

Regards

Posted by Mizzt
Hi,
Im new here at topsony. Can someone fix a easy guide how to debrand a k810i? It would be awesome.

Mizzt

Posted by SilveR.
I just flashed from K800 to K810 firmware, everything works great, like photo fix and Trackid, But I can't found the Keypad light fix so it's like K800?? any one still has it some where? and upload it? That's would be very kind of you guys ..

Posted by tranced
http://cybershot.4shared.com > modding

Posted by SilveR.
thanks alot..

Posted by tinoleo
nice thread. finally i convert to R8BA024..but, geee, i just realize that the keypad light didn't work! i already copied the k800 lighteffects..what could b wrong?

[ This Message was edited by: tinoleo on 2008-06-20 00:45 ]

Posted by tinoleo
my lighteffect still can't work... why???

Posted by strizlow800
Check if you have sopied the lighteffects to the right folder... Anyway I have done this many times and never had problem with the lighteffects...

P.S. You can also get some modded/special lighteffects files from www.se-nse.com... They are great also

Posted by tinoleo
my fault

.. it looks didn't work coz the brightness level is 10%..sorry hehehe

Posted by centur

On 2008-06-20 11:06:16, tinoleo wrote:
my lighteffect still can't work... why???

Because you must move XS++ and folder own_custpack in New Folder!
Then make this:

Posted by sjekkih
Hi, i just flashed my k800 to k810i, without the lighteffects. Anyway my camera button dont work. I can enter the camera mode, but not take picture, or hold focus. I can take a picture with the joystick, but it lacks the same comfort and focus hold. Any ideas how I could fix it, or have anyone had the same problem?

thanks

Posted by fdghost
hi everyone
where can i find the R8BA024 main firmware for hong kong?
i just can the FS firmware for hong kong
or can i use china that one?

thanks!

Posted by tranced
for k800 or k810?

Posted by fdghost

On 2008-09-05 16:46:22, tranced wrote:
for k800 or k810?

sorry for i didn't mention that
it is k810
thanks!

Posted by tranced
http://www.4shared.com/file/4[....]BA024_HONG_KONG_RED52.html?s=1

Posted by fdghost

On 2008-09-05 17:05:14, tranced wrote:
http://www.4shared.com/file/4[....]BA024_HONG_KONG_RED52.html?s=1

thanks!
you are my man!

Posted by tranced

On 2008-09-05 17:16:02, fdghost wrote:
thanks!
you are my man!

that's what my gf says

you're welcome mate

Posted by strizlow800
Hehehe www.4shared.com is great source for firmware files... Especially for DB2020 phones. Everything you need is there.

Posted by naveedaziz83
can sum1 give me the following

k810_r8ba024_fs_m_east_n_afr_52

cda 102568/6

ty

Posted by bluedragonzk
can someone help me!
I tried to flash my k800i SW R8BF003 to k810i R8BA024...
I think my firmware's the latest but when I flashed it with XS++..
I followed the instructions on MAIN, FS, lighteffects and custpacks......
I still got the WSOD!!!!
Now I stick to R8BF003 k800i....
Is the problem on the EROM or CID?
mine is CID52

Posted by tranced
try to flash it again

Posted by dudi
Try to flash the phone with a different firmware, the one you use might be broken!!

Posted by strizlow800

On 2008-09-25 17:15:41, bluedragonzk wrote:
can someone help me!
I tried to flash my k800i SW R8BF003 to k810i R8BA024...
I think my firmware's the latest but when I flashed it with XS++..
I followed the instructions on MAIN, FS, lighteffects and custpacks......
I still got the WSOD!!!!
Now I stick to R8BF003 k800i....
Is the problem on the EROM or CID?
mine is CID52

Shouldn't be problem with EROM if you flashed correctly (and if the phone was in good working order before flashing)... So try downloading other firmware files. This may result if used corrupted or files that aren't compatible to each other when flashing...

EROM would be the next thing if the above doesn't help. But make sure you have everything done properly when flashing EROM. You HAVE TO use K800 EROM for K800!!! You mustn't use other models EROM. It could damage the phone seriously and you'll need service cable then...

Posted by bluedragonzk
I flashed my k800 R8BF003 to k810 R8BA024 again but it failed....
I tried to apply several patches just to make it work but in the end I just returned the to my MAIN. I also forgot to flash my FS again that is why my phone is read as k810 R8BA024 but it has no TrackId and Photofix..only the k810 demotour and Extreme Air Snowboarding.......
Does flashing to k810 R8BA024 need a k800 R8BA024? plz help