Posted by Guto_ViP
On 2007-11-26 13:27:13, cuckoo wrote:
thanks!
http://www.4shared.com/file/3[....]108452/camdriver0_47_gnus.html
i can't download!
hanve you another way?
http://se4u.4shared.com/
Posted by cuckoo
i agree with SEKseries
i wait for genus to take photos, contrast original driver and your driver(genus)
about color saturation,(58,05)---(58,08)
thanks
Posted by cuckoo
Guto_ViP
i can't download~
send it to my Email, 6636302@163.com
THANKS
[ This Message was edited by: cuckoo on 2007-11-26 12:45 ]
Posted by genus
On 2007-11-26 13:40:27, cuckoo wrote:
i agree with SEKseries
i wait for genus to take photos, contrast original driver and your driver(genus)
about color saturation,(58,05)---(58,08)
thanks
Too little increase woudnt see any different, so i will do more larger value.
Posted by gprsman
@ quangbh30
tested 2.2 fix new : http://www.sendspace.com/file/wdkjmo
Make the same photos first better focus
Posted by cuckoo
well , 01---0F??
do your best~
Posted by SEKseries
On 2007-11-26 13:49:54, genus wrote:
On 2007-11-26 13:40:27, cuckoo wrote:
i agree with SEKseries
i wait for genus to take photos, contrast original driver and your driver(genus)
about color saturation,(58,05)---(58,08)
thanks
Too little increase woudnt see any different, so i will do more larger value.
As Raiderski said,using value 1D in command 58 will shows a color different......So,plz use value 1D when u take the picture......thks......
Posted by quangbh30
GPRSman's fix cam
[ This Message was edited by: quangbh30 on 2007-11-26 13:07 ]
Posted by genus
Too large, i think not work too.
So i compare my camdriver setting, no any editing
COM_EVENT(58,00)
COM_EVENT(58,0B)
COM_EVENT(58,00)
COM_EVENT(58,0B)
Little hand shake, sori
All this with 90% jpeg compression
[ This Message was edited by: genus on 2007-11-26 13:13 ]
Posted by cuckoo
effect is Obvious，genus~
00-----10, contrast ??
Posted by gprsman
On 2007-11-26 14:05:22, quangbh30 wrote:
GPRSman's fix cam
[ This Message was edited by: quangbh30 on 2007-11-26 13:07 ]
Tkanks ,before better shutter speed 1/10 minor pixels .
Posted by genus
On 2007-11-26 14:33:08, gprsman wrote:
On 2007-11-26 14:05:22, quangbh30 wrote:
GPRSman's fix cam
[ This Message was edited by: quangbh30 on 2007-11-26 13:07 ]
Tkanks ,before better shutter speed 1/10 minor pixels .
@gprsman
There is no need to copy the -content from k850i as this:
UPDATE_PHOTO = // Updates photo metering
$p5 16
$c5 00 // Photo metering is not spot?
$cl
$u16 // Update photo metering => spot
$cx;
UPDATE_ISO = // Updates ISO
$p5 11
$c5 00 // ISO is auto
$cl
$u11 // Update ISO
$cx;
WB_ISO100 = // Correct WB for ISO100 xenon
#SET_REG(43,25) // FLASH_CC_R = 0x25 (colour temperature of 7000 K for flash)
#SET_REG(44,73) // FLASH_CC_B = 0x73 (colour temperature of 7000 K for flash)
;
WB_ISO200 = // Correct WB for ISO200 xenon
#SET_REG(43,27) // FLASH_CC_R = 0x27 (colour temperature of 6000 K for flash)
#SET_REG(44,6D) // FLASH_CC_B = 0x6D (colour temperature of 6000 K for flash)
;
WB_ISO400 = // Correct WB for ISO400 xenon
#SET_REG(43,2A) // CC_R_FLASH = 0x2A (colour temperature of 6800 K for flash)
#SET_REG(44,70); // CC_B_FLASH = 0x70 (colour temperature of 6800 K for flash)
; <==== delete this..
you can rewrite the driver in different way, but this all doesnt give any effect on the picture, because same comment was calling, but just using different way only. Hope you will discover more things on camdriver
[ This Message was edited by: genus on 2007-11-26 13:40 ]
Posted by gprsman
Thanks genus
Posted by SEKseries
On 2007-11-26 14:07:25, genus wrote:
Too large, i think not work too.
So i compare my camdriver setting, no any editing
COM_EVENT(58,00)
COM_EVENT(58,0B)
COM_EVENT(58,00)
COM_EVENT(58,0B)
Little hand shake, sori
All this with 90% jpeg compression
[ This Message was edited by: genus on 2007-11-26 13:13 ]
Obviously, the color saturation is working on K790/K800/K810......
:D
Posted by genus
but the value required to see the effect was large.
I think 0b is limit alrdy, if over 0b, oversaturation will occur, especially for yellow colour objects.
this is from 4.8 camdriver (coming soon), alrdy resized using Picasa, but no any editing
Auto mode
document mode
the colour almost can say same as wat i view using my eye
[ This Message was edited by: genus on 2007-11-26 15:24 ]
Posted by Guto_ViP
Very nice Genus!
Posted by mario06
On 2007-11-26 17:02:20, Guto_ViP wrote:
Very nice Genus!
don't forget to fix the macro crosshair bug
Posted by quangbh30
Genus'cam4.7
Posted by genus
On 2007-11-26 17:20:18, mario06 wrote:
On 2007-11-26 17:02:20, Guto_ViP wrote:
Very nice Genus!
don't forget to fix the macro crosshair bug
Wat is this????? If you put infinity focus mode in normal mode then change to document mode sure no focus come out??? Or you mean when we use spot mode at normal there is crosshair but no crosshair at document mode??? this i think not camdriver problem is firmware.
Oh...i forget to fix the WB bug when flash on again....sori, i will do change in my 4.8
[ This Message was edited by: genus on 2007-11-27 03:13 ]
Posted by genus
On 2007-11-26 23:31:29, quangbh30 wrote:
Genus'cam4.7
Dont 4get when taking picture wif flash, hand should not cover the flash, because this will cause reflex & the picture sometimes seem overexposure little bit.
[ This Message was edited by: genus on 2007-11-27 03:29 ]
Posted by KevinY
thanks for the link
Posted by alvink83
Hi all, I'm new to SE phones hacks. Just bought a K810i and would to use the modded camdriver. Can anyone instruct / guide me on this? Thanks alot.
Posted by mario06
On 2007-11-27 03:56:54, genus wrote:
On 2007-11-26 17:20:18, mario06 wrote:
On 2007-11-26 17:02:20, Guto_ViP wrote:
Very nice Genus!
don't forget to fix the macro crosshair bug
Wat is this????? If you put infinity focus mode in normal mode then change to document mode sure no focus come out??? Or you mean when we use spot mode at normal there is crosshair but no crosshair at document mode??? this i think not camdriver problem is firmware.
Oh...i forget to fix the WB bug when flash on again....sori, i will do change in my 4.8
[ This Message was edited by: genus on 2007-11-27 03:13 ]
i have an original k810 with firmware R6BC002, the problem is this when i take a closeup(macro) picture leaving all settings to Auto the white crosshair doesn't turn green but the shot comes out ok, can you fix this bug?
regards
Posted by number1
we really need 2 find the k800i shutterspeed command i have a good test that allows us to test 34 different values at once,
open the camdriver and find norm mode
// Normal mode settings
NORM_MODE = #COM_EVENT(02,00) // AE_AUTO
#COM_EVENT(55,00) // Reset contrast
#COM_EVENT(56,02) // Sharpeness 00 to 08
#COM_EVENT(06,00) // Reset exposure
put all ur 34 possible shutter speed commands here
#SET_REG(40,07) // Set flash ISO to default 400
#UPDATE_COLOR
#WB_ISO400;
now use this
below values as 1/x sec:
00 = auto, 01 = 6400, 02 = 5000, 03 = 3200, 04 = 2500, 05 = 2000, 06 = 1600, 07 = 1250, 08 = 1000
09 = 800, 0A = 640, 0B = 500, 0C = 400, 0D = 320, 0E = 250, 0F = 200, 10 = 160, 11 = 125, 12 = 100
13 = 80, 14 = 60, 15 = 50, 16 = 40, 17 = 30, 18 = 25, 19 = 20, 1A = 15, 1B = 13, 1C = 10
1D = 8
1E = 6
1F = 5
20 = 4
21 = 3
22 = 2.5
23 = 2
use all the different values above but not 1D = 8, in ur possible shutter speed commands e.g #SET_REG(34,01), #SET_REG(35,02), and so on just don't use 1D = 8, now u should have something like
// Normal mode settings
NORM_MODE = #COM_EVENT(02,00) // AE_AUTO
#COM_EVENT(55,00) // Reset contrast
#COM_EVENT(56,02) // Sharpeness 00 to 08
#COM_EVENT(06,00) // Reset exposure
#SET_REG(34,01)
#SET_REG(35,02)
and so on
#SET_REG(40,07) // Set flash ISO to default 400
#UPDATE_COLOR
#WB_ISO400;
now load the camdriver on ur phone, find somewhere pitch black or very dark and using all auto settings and turn off the flash take a couple of pics, plug ur fone in ur pc and read the exif of the pictures using
http://forum2cv.chez.tiscali.fr/exifread.exe
in the pitch black the standard k800i shutter speed is 1/8 all the time, if u got something different e.g 1/5000 then see which value had 02 next to it erase all the other 33 values and make some tests and then that will be the k800i shutter speed command
[ This Message was edited by: number1 on 2007-11-27 09:46 ]
Posted by gprsman
camdriver gprsman 2.2 fix new 2
download: http://www.sendspace.com/file/m7vlyy
photos:
auto + fluorescent distance 4 metri :
auto + fluorescent distance 2/3 metri :
auto + fluorescent distance 4/5 metri only lamp of 100W
auto + fluorescent distance 7/8 metri total dark
auto + fluorescent distance 6/7 metri total dark
auto + fluorescent distance 2 metri total dark
document mode EV -2.0
[ This Message was edited by: gprsman on 2007-11-27 10:46 ]
Posted by SEKseries
On 2007-11-27 10:42:29, number1 wrote:
we really need 2 find the k800i shutterspeed command i have a good test that allows us to test 34 different values at once,
open the camdriver and find norm mode
// Normal mode settings
NORM_MODE = #COM_EVENT(02,00) // AE_AUTO
#COM_EVENT(55,00) // Reset contrast
#COM_EVENT(56,02) // Sharpeness 00 to 08
#COM_EVENT(06,00) // Reset exposure
put all ur 34 possible shutter speed commands here
#SET_REG(40,07) // Set flash ISO to default 400
#UPDATE_COLOR
#WB_ISO400;
now use this
below values as 1/x sec:
00 = auto, 01 = 6400, 02 = 5000, 03 = 3200, 04 = 2500, 05 = 2000, 06 = 1600, 07 = 1250, 08 = 1000
09 = 800, 0A = 640, 0B = 500, 0C = 400, 0D = 320, 0E = 250, 0F = 200, 10 = 160, 11 = 125, 12 = 100
13 = 80, 14 = 60, 15 = 50, 16 = 40, 17 = 30, 18 = 25, 19 = 20, 1A = 15, 1B = 13, 1C = 10
1D = 8
1E = 6
1F = 5
20 = 4
21 = 3
22 = 2.5
23 = 2
use all the different values above but not 1D = 8, in ur possible shutter speed commands e.g #SET_REG(34,01), #SET_REG(35,02), and so on just don't use 1D = 8, now u should have something like
// Normal mode settings
NORM_MODE = #COM_EVENT(02,00) // AE_AUTO
#COM_EVENT(55,00) // Reset contrast
#COM_EVENT(56,02) // Sharpeness 00 to 08
#COM_EVENT(06,00) // Reset exposure
#SET_REG(34,01)
#SET_REG(35,02)
and so on
#SET_REG(40,07) // Set flash ISO to default 400
#UPDATE_COLOR
#WB_ISO400;
now load the camdriver on ur phone, find somewhere pitch black or very dark and using all auto settings and turn off the flash take a couple of pics, plug ur fone in ur pc and read the exif of the pictures using
http://forum2cv.chez.tiscali.fr/exifread.exe
in the pitch black the standard k800i shutter speed is 1/8 all the time, if u got something different e.g 1/5000 then see which value had 02 next to it erase all the other 33 values and make some tests and then that will be the k800i shutter speed command
[ This Message was edited by: number1 on 2007-11-27 09:46 ]
If we really use this method to find out the shutter speed of K790/K800/K810, i recommend not to use 0E and 1D because this 2 speed values appear in the original camdriver and please use the original driver to do this not a modded driver......
Posted by number1
On 2007-11-27 12:24:51, SEKseries wrote:
On 2007-11-27 10:42:29, number1 wrote:
we really need 2 find the k800i shutterspeed command i have a good test that allows us to test 34 different values at once,
open the camdriver and find norm mode
// Normal mode settings
NORM_MODE = #COM_EVENT(02,00) // AE_AUTO
#COM_EVENT(55,00) // Reset contrast
#COM_EVENT(56,02) // Sharpeness 00 to 08
#COM_EVENT(06,00) // Reset exposure
put all ur 34 possible shutter speed commands here
#SET_REG(40,07) // Set flash ISO to default 400
#UPDATE_COLOR
#WB_ISO400;
now use this
below values as 1/x sec:
00 = auto, 01 = 6400, 02 = 5000, 03 = 3200, 04 = 2500, 05 = 2000, 06 = 1600, 07 = 1250, 08 = 1000
09 = 800, 0A = 640, 0B = 500, 0C = 400, 0D = 320, 0E = 250, 0F = 200, 10 = 160, 11 = 125, 12 = 100
13 = 80, 14 = 60, 15 = 50, 16 = 40, 17 = 30, 18 = 25, 19 = 20, 1A = 15, 1B = 13, 1C = 10
1D = 8
1E = 6
1F = 5
20 = 4
21 = 3
22 = 2.5
23 = 2
use all the different values above but not 1D = 8, in ur possible shutter speed commands e.g #SET_REG(34,01), #SET_REG(35,02), and so on just don't use 1D = 8, now u should have something like
// Normal mode settings
NORM_MODE = #COM_EVENT(02,00) // AE_AUTO
#COM_EVENT(55,00) // Reset contrast
#COM_EVENT(56,02) // Sharpeness 00 to 08
#COM_EVENT(06,00) // Reset exposure
#SET_REG(34,01)
#SET_REG(35,02)
and so on
#SET_REG(40,07) // Set flash ISO to default 400
#UPDATE_COLOR
#WB_ISO400;
now load the camdriver on ur phone, find somewhere pitch black or very dark and using all auto settings and turn off the flash take a couple of pics, plug ur fone in ur pc and read the exif of the pictures using
http://forum2cv.chez.tiscali.fr/exifread.exe
in the pitch black the standard k800i shutter speed is 1/8 all the time, if u got something different e.g 1/5000 then see which value had 02 next to it erase all the other 33 values and make some tests and then that will be the k800i shutter speed command
[ This Message was edited by: number1 on 2007-11-27 09:46 ]
If we really use this method to find out the shutter speed of K790/K800/K810, i recommend not to use 0E and 1D because this 2 speed values appear in the original camdriver and please use the original driver to do this not a modded driver......
no u can use 0E just don't use 1D in the pitch black the k800i always produces a shutter speed of 1/8
Posted by genus
On 2007-11-27 07:51:45, mario06 wrote:
On 2007-11-27 03:56:54, genus wrote:
On 2007-11-26 17:20:18, mario06 wrote:
On 2007-11-26 17:02:20, Guto_ViP wrote:
Very nice Genus!
don't forget to fix the macro crosshair bug
Wat is this????? If you put infinity focus mode in normal mode then change to document mode sure no focus come out??? Or you mean when we use spot mode at normal there is crosshair but no crosshair at document mode??? this i think not camdriver problem is firmware.
Oh...i forget to fix the WB bug when flash on again....sori, i will do change in my 4.8
[ This Message was edited by: genus on 2007-11-27 03:13 ]
i have an original k810 with firmware R6BC002, the problem is this when i take a closeup(macro) picture leaving all settings to Auto the white crosshair doesn't turn green but the shot comes out ok, can you fix this bug?
regards
This is because cannot get focus. This is not bug, when this event occur, the camera still force it to finish focusing. If not there will be repeating or continuous focus until the camera get the sharp focusing, if i fix it.
@number1
I dont think this can be use to test the shutter speed. Because some comment alrdy present in the main of phone, we need to recall back the REG reset it then it will show result, if not automatically jump back required shutter speed.
[ This Message was edited by: genus on 2007-11-27 12:19 ]
Posted by cuckoo
seq_set_prop_8 =
$s5 %0
$c5 00 // Effect is normal?
#COM_EVENT(58,0b)
$cl
#COM_EVENT(58,00) // Reset PICT_COLORGAIN
$cx
#COM_EVENT(53,$w5);
no effect!!!
GENUS,i think only a question to do,(58,0b)~
the other,let alone
Posted by genus
On 2007-11-27 13:27:21, cuckoo wrote:
seq_set_prop_8 =
$s5 %0
$c5 00 // Effect is normal?
#COM_EVENT(58,0b)
$cl
#COM_EVENT(58,00) // Reset PICT_COLORGAIN
$cx
#COM_EVENT(53,$w5);
no effect!!!
GENUS,i think only a question to do,(58,0b)~
the other,let alone
seq_set_prop_8 =
$s5 %0
$c5 00 // Effect is normal?
#COM_EVENT(58,0b)
$cl
#COM_EVENT(58,00) // Reset PICT_COLORGAIN
$cx
#COM_EVENT(53,$w5);
Do this really no effect???
So, i think need to follow the way i do in my camdriver.
Posted by masterjp
@genus
sir, i like your new 4.7, but i like my document mode without the AF led turning on. you have that on 4.51. please tell me how to disable it in 4.7
thanks
Posted by SEKseries
@genus
since u said some comment already have the value in the MAIN, i wonder we can find out the shutter speed command in the MAIN......
Posted by number1
On 2007-11-27 13:48:14, SEKseries wrote:
@genus
since u said some comment already have the value in the MAIN, i wonder we can find out the shutter speed command in the MAIN......
the shutter speed command is in the main, so we need the command that overwrites it like COM_EVENT(04, does on the k550i, the .mbn can be taken apart with a hex editor
Posted by genus
because we cannot suddenly say changhe shutter speed only put the value, we must let the camera know that when there is low light..then...then...need to change shutter speed from (default) to ....
Posted by genus
On 2007-11-27 13:47:31, masterjp wrote:
@genus
sir, i like your new 4.7, but i like my document mode without the AF led turning on. you have that on 4.51. please tell me how to disable it in 4.7
thanks
Here you are
change below the property 10, for seq_set_prop_a_1 to this:
seq_set_prop_a_1 =
$c9 08 // R5
#COM_EVENT(72,00) // Update the registers
#READ_REG(28,$r2 5 5) // Read AE-value (MSB)in camera reg 28
$>5 5
$p4 10 // Put value of scene property in reg 4
$c4 07 // Document mode?
// AF-LED OFF in document mode
$cl
$c4 06 // Sports mode?
// AF-LED OFF in sports mode
$cl
$c5 00 // AF-LED ON?
$go 37 1 // Set gpio 3:7 (AF-LED) to high (one)
$cl $cx
$cx
$cx
$cl // else R6
$ce 01 // AF-LED for IS_MOVIE_MODE?
#COM_EVENT(72,00) // Update the registers
#READ_REG(28,$r2 5 5) // Read AE-value (MSB)in camera reg 28
$>5 5
$c5 00 // AF-LED ON?
$go 37 1 // Set gpio 3:7 (AF-LED) to high (one)
$cl $cx
$cl // Not IS_MOVIE_MODE
#COM_EVENT(72,00) // Update the registers
#READ_REG(3a,$r2 5 5) // Read AE_FLASHINFO_STATUS
$p4 10 // Put value of scene property in reg 4
$c4 07 // Document mode?
// AF-LED OFF in document mode
$cl
$c4 06 // Sports mode?
// AF-LED OFF in sports mode
$cl
$c5 03 // AF-LED ON?
$go 37 1 // Set gpio 3:7 (AF-LED) to high (one)
$cl $cx
$cx
$cx
$cx
$cx
#COM_EVENT(42,01);
Posted by number1
On 2007-11-27 13:53:59, genus wrote:
because we cannot suddenly say changhe shutter speed only put the value, we must let the camera know that when there is low light..then...then...need to change shutter speed from (default) to ....
i am not understanding, i fixed the shutter speeds on the k550i when fixed to 1/2 sec the phone use iso 100 and it gives a very clean no noise pic, why can't the same be done on the k800i
Posted by genus
On 2007-11-27 14:01:52, number1 wrote:
On 2007-11-27 13:53:59, genus wrote:
because we cannot suddenly say changhe shutter speed only put the value, we must let the camera know that when there is low light..then...then...need to change shutter speed from (default) to ....
i am not understanding, i fixed the shutter speeds on the k550i when fixed to 1/2 sec the phone use iso 100 and it gives a very clean no noise pic, why can't the same be done on the k800i
Actually, what you gonna to do???
The twilightlandscape mode alrdy have shutter speed 1/2s and iso125.
Are you gonna to change the shutter speed of other mode???
Posted by masterjp
@genus
thanks bro. i love your camdrivers. cant wait for 4.8
keep it up!
Posted by number1
On 2007-11-27 14:10:17, genus wrote:
On 2007-11-27 14:01:52, number1 wrote:
On 2007-11-27 13:53:59, genus wrote:
because we cannot suddenly say changhe shutter speed only put the value, we must let the camera know that when there is low light..then...then...need to change shutter speed from (default) to ....
i am not understanding, i fixed the shutter speeds on the k550i when fixed to 1/2 sec the phone use iso 100 and it gives a very clean no noise pic, why can't the same be done on the k800i
Actually, what you gonna to do???
The twilightlandscape mode alrdy have shutter speed 1/2s and iso125.
Are you gonna to change the shutter speed of other mode???
yes and we can have Em mode it would be very helpful to know the shutter speed command
Posted by ahil13
hi guys,
i`m using gprsman 2.2 + LiveColours™ fix and the liveColours really works great!
i put this setting in normal mode
#COM_EVENT(55,01) // Reset contrast
#COM_EVENT(56,08) // Sharpeness 00 to 08
#COM_EVENT(06,00) // Reset exposure
#COM_EVENT(54,00) // Reset Brightness
#SET_REG(40,05) // AE_XENON_ISO = 250
#SET_REG(43,28) // FLASH_CC_R = 0x28 (colour temperature of 5700 K for flash)
#SET_REG(44,6A) // FLASH_CC_B = 0x6A (colour temperature of 5700 K for flash)
#WB_ISO250
#COM_EVENT(58,0B);
i think this colours are real, and the sharpness make pictures detail, but cause noise
Posted by genus
On 2007-11-27 14:27:10, number1 wrote:
On 2007-11-27 14:10:17, genus wrote:
On 2007-11-27 14:01:52, number1 wrote:
On 2007-11-27 13:53:59, genus wrote:
because we cannot suddenly say changhe shutter speed only put the value, we must let the camera know that when there is low light..then...then...need to change shutter speed from (default) to ....
i am not understanding, i fixed the shutter speeds on the k550i when fixed to 1/2 sec the phone use iso 100 and it gives a very clean no noise pic, why can't the same be done on the k800i
Actually, what you gonna to do???
The twilightlandscape mode alrdy have shutter speed 1/2s and iso125.
Are you gonna to change the shutter speed of other mode???
yes and we can have Em mode it would be very helpful to know the shutter speed command
I still cannot find the command, all nothing happen...
Posted by number1
same here, i tried a few commands and nothing
Posted by whitehackker
if i update my k800 to k800i fw R8BA024 will it also have pixelated video like the k810i fw R8BA024?
Posted by Nil Einne
Sorry if this has already been discussed but I couldn't find anything from searching. Is there really good video cam improvements for the K800i? I've seen the 35FPS hack but I would expect for most users they would much rather have something like 320x240 at 15FPS. I'm still deciding between this phone and the Nokia 6288 or 6233 and I'm rather surprised that despite having the better camera, video is so crap on the K800i. Both the Nokias are able to handle 640x480 at 15 FPS no problem (I've tried it with a friend's phone and it works fine) yet this can't even handle 320x240 15FPS officially! If someone has managed to hack it that would be good since it would make the k800i a choice much worth considering. I'm thinking if you could handle QCIF at 35FPS you might be able to handle 320x240 at 15FPS. Or is the processor or whatever on the k800i really so crappy compared to the Nokias?
Posted by number1
On 2007-11-27 17:05:34, Nil Einne wrote:
Sorry if this has already been discussed but I couldn't find anything from searching. Is there really good video cam improvements for the K800i? I've seen the 35FPS hack but I would expect for most users they would much rather have something like 320x240 at 15FPS. I'm still deciding between this phone and the Nokia 6288 or 6233 and I'm rather surprised that despite having the better camera, video is so crap on the K800i. Both the Nokias are able to handle 640x480 at 15 FPS no problem (I've tried it with a friend's phone and it works fine) yet this can't even handle 320x240 15FPS officially! If someone has managed to hack it that would be good since it would make the k800i a choice much worth considering. I'm thinking if you could handle QCIF at 35FPS you might be able to handle 320x240 at 15FPS. Or is the processor or whatever on the k800i really so crappy compared to the Nokias?
the best that i can get out the k800i is 22fps 176x144 any thing over that is just to buggy, the k800i is a db2020 it has more than enough power to handle 320x240 30fps sec video, i think it's limited by the firmware. the k800i pictures are 10x better than any nokia
Posted by genus
Yup, the firmware limit it alrdy...
Even 17.5fps also buggy, when video recording start, zooming lag lag lag.
Posted by tyko_04
gprsman 2.2 fix with live colors 0B
without live colors
with live colors (L.C.)
without L.C.
with L.C.
without L.C.
with L.C.
Posted by Guto_ViP
Some pics i liked without livecolor....
Posted by Guto_ViP
Testing Number1 camdriver 2.9 Upd 2
[u]- Normal mode, WB automatic, no flash, infinite focus
http://i145.photobucket.com/a[....]eWBautomaticnoflashinfinit.jpg
- Normal mode, WB automatic, no flash, infinite focus
http://i145.photobucket.com/a[....]deWBautomaticnoflashinfi-1.jpg
- Normal mode, WB automatic, flash, normal focus
http://i145.photobucket.com/a[....]eWBautomaticflashnormalfoc.jpg
- twinight portrait mode, WB automatic, flash, normal focus
http://i145.photobucket.com/a[....]ortraitmodeWBautomaticflas.jpg
- Normal mode, WB automatic, flash, normal focus
http://i145.photobucket.com/a[....]deWBautomaticflashnormal-1.jpg
- twinight portrait mode, WB automatic, flash, normal focus
http://i145.photobucket.com/a[....]portraitmodeWBautomaticf-1.jpg
- Normal mode, WB automatic, flash, normal focus
http://i145.photobucket.com/a[....]deWBautomaticflashnormal-2.jpg
- twinight portrait mode, WB automatic, flash, normal focus
http://i145.photobucket.com/a[....]portraitmodeWBautomaticf-2.jpg
- Normal mode, WB automatic, flash, normal focus
http://i145.photobucket.com/a[....]deWBautomaticflashnormal-3.jpg
- twinight portrait mode, WB automatic, flash, normal focus
http://i145.photobucket.com/a[....]portraitmodeWBautomaticf-3.jpg
- Normal mode, WB automatic, flash, normal focus
http://i145.photobucket.com/a[....]deWBautomaticflashnormal-4.jpg
- twinight portrait mode, WB automatic, flash, normal focus
http://i145.photobucket.com/a[....]portraitmodeWBautomaticf-4.jpg
[/u]
Now i will test Number1 2.9 Upd 3
Posted by norbi_nw
so what to change to get live colors? plz post the lines.. I wanna impliment L.C. in kopritis 3.71 (already modded sharpness to 08, need L.C. ..)