Posted by burner8
I think it is not to sharp. I like sharp pics. But for those it is to sharp i will post a second version with low sharp.
Posted by Goldmen
On 2007-11-25 06:18:14, kuratinja wrote:
where's the link of any/all camera driver ?
anybody can post it...thanks..
http://Goldman-K800i.4shared.com/
Posted by kuratinja
Yo burner8, where's da link 4 y'ur driver ? I like sharp pic too..
Posted by cuckoo
#COM_EVENT(58,07) ，it controls K790C 's colour ,really?
00~10 , i choose 06 or 07; finally , i choose 07.
[ This Message was edited by: cuckoo on 2007-11-25 10:14 ]
[ This Message was edited by: cuckoo on 2007-11-25 10:15 ]
Posted by genus
On 2007-11-25 11:12:32, cuckoo wrote:
#COM_EVENT(58,07) ，it controls K790C 's colour ,really?
00~10 , i choose 06 or 07; finally , i choose 07.
[ This Message was edited by: cuckoo on 2007-11-25 10:14 ]
[ This Message was edited by: cuckoo on 2007-11-25 10:15 ]
I think this not work, you can try it. I will really test it soon.
@burner8
It really oversharpen, if you use better and large LCD screen to view it you will get it, before i use noraml monitor to view photo, didnt see any oversharpen, but now i alrdy change LCD screen, all oversharp, even DC also not sharp like this, it almost like alrdy processed using PS. Why dont set the jpeg compression to 90%, this will better.
[ This Message was edited by: genus on 2007-11-25 10:56 ]
Posted by genus
I alrdy test the COM_EVENT(58, XX)
Yes, it work, if you want to test it, do like this below property 14
seq_set_prop_e_0 = $sb 00 // OFF
$c9 08 // R5 camera version?
#COM_EVENT(5a,00)
#COM_EVENT(58,07) // Reset PICT_COLORGAIN
$cl // Else R6 version
#COM_EVENT(5a,08)
#COM_EVENT(58,07) // Reset PICT_COLORGAIN
$cx;
seq_set_prop_e_1 = ; // No external flash
seq_set_prop_e_2 = $sb 02 // Auto
#COM_EVENT(55,00) // Reset contrast
#COM_EVENT(58,00); // Reset PICT_COLORGAIN
seq_set_prop_e_3 = $sb 03 // Auto, red-eye
#COM_EVENT(55,00) // Reset contrast
#COM_EVENT(58,0f) ; // Reset PICT_COLORGAIN
seq_set_prop_e_4 = $sb 04 // Forced ON, for service menu and production tests
$c9 08 // R5 camera version?
#COM_EVENT(5a,83) // Forced xenon 0b10000011, slow sync at beginning
$cl
#COM_EVENT(51,00) // Sensor scene "Auto 00"
#COM_EVENT(5a,9b) // FLASH_MODE 0b10001011: Flash on, RER off, sync on beginning.
$cx;
No need to take photo, just change the flash from auto to red-eye then off flash, you will see the different. But dont forget to change back, because this will give you bug.
Posted by G-Izzat
Genus,
does this mean we can now control the colours?
Posted by mario06
On 2007-11-24 17:43:07, salambaba wrote:
I'm using of 2.1 Burner , i think this one is the best :
The 2.9 is released or no ? ( if yes download link plz)
Great picture, just a little bit of sharpness less but just a little and it's kick @ss
Posted by burner8
Ok guys i will give you a second edition with little less sharp today when i get home.
Posted by xan K
cool! it will be interesting to try.
Posted by genus
On 2007-11-25 12:31:13, G-Izzat wrote:
Genus,
does this mean we can now control the colours?
Yup, but there is bug, where when we change the effect setting, problem will out, but it alrdy solved just do some change in effect property. COM_EVENT(58,XX) i think is saturation or colour gain, this really big different if you set it 00 compare to 0F, especially at indoor.
[ This Message was edited by: genus on 2007-11-25 13:53 ]
Posted by burner8
good evening:
Here the promised drivers.
Version 2.11 with reduced sharpness
http://www.4shared.com/accoun[....]ness.html?sId=K7Tasl8OiZMepp7M
Version 2.12 with default sharpness 00
http://www.4shared.com/accoun[....]ness.html?sId=K7Tasl8OiZMepp7M
Try it and find the best for you.
burner8
[ This Message was edited by: burner8 on 2007-11-25 22:45 ]
[ This Message was edited by: burner8 on 2007-11-25 22:53 ]
Posted by milan91
Before i bought my k800 i see many pics on one forum, and i today go back on that forum to see again that pics and sw version
All good pics are with R1CB001, and i go on topsony and download that sw for my k800 cid52
Before i put R1CB001 i took some pics with my k810 sw R8BA024 with genus 4.6 cam driver.
And now i have R1CB001 and took now some pics:
(first with k800 sw R1CB001, and second with k810 sw R8BA024 with genus 4.6 cam driver)
1.Document mode, flash on, ev 0.0
2. all auto, flash on, ev 0.0
3.all auto, flash on, ev 0.0
4. this is with twilight landscape, stabilizer on, ev 0.0 and this is with R1CB001, no too much noise
Tomorrow i put and day pics with R1CB001.
btw. ok i know, this is really stupid but i want to try this version
_________________
Ericsson 628>3210>3310>3410>3510>siemens mc60>K750i>> 2x nokia 6630>>w810i>>Sony Ericsson K800i modded +1GB SanDisk M2+k810 new sw
[ This Message was edited by: milan91 on 2007-11-25 23:41 ]
Posted by mario06
On 2007-11-26 00:38:55, milan91 wrote:
Before i bought my k800 i see many pics on one forum, and i today go back on that forum to see again that pics and sw version
All good pics are with R1CB001, and i go on topsony and download that sw for my k800 cid52
Before i put R1CB001 i took some pics with my k810 sw R8BA024 with genus 4.6 cam driver.
And now i have R1CB001 and took now some pics:
(first with k800 sw R1CB001, and second with k810 sw R8BA024 with genus 4.6 cam driver)
1.Document mode, flash on, ev 0.0
2. all auto, flash on, ev 0.0
3.all auto, flash on, ev 0.0
4. this is with twilight landscape, stabilizer on, ev 0.0 and this is with R1CB001, no too much noise
Tomorrow i put and day pics with R1CB001.
btw. ok i know, this is really stupid but i want to try this version
_________________
Ericsson 628>3210>3310>3410>3510>siemens mc60>K750i>> 2x nokia 6630>>w810i>>Sony Ericsson K800i modded +1GB SanDisk M2+k810 new sw
[ This Message was edited by: milan91 on 2007-11-25 23:41 ]
which picture are closer to the real thing, the k800 or k810?
Posted by genus
Here is my new camdriver 4.7:
- Fix white balance bug: where there is some delaying when change the WB manually
- Enhance colour / increase saturation
- Increase exposure when flash is set to off
- For fine mode, 90% jpeg compression (default)
download here:
http://www.4shared.com/file/3[....]108452/camdriver0_47_gnus.html
Sometimes, increase the colour may not good for certain condition where the auto WB is not correct, like blue colour on building at time 7:00-8:00pm. Increase colour will cause the blue WB more noticeable. But dont worry, just manually change the WB setting to cloudy or daylight will fix this incorrect auto WB.
[ This Message was edited by: genus on 2007-11-26 06:56 ]
Posted by kuratinja
Nice ! Anybody compare genus and burner8 driver ? Review it here please
Posted by mario06
burner's 2.11
Full Auto Settings
Posted by mario06
burner's 2.1
Full Auto Settings
Posted by milan91
On 2007-11-26 05:10:58, mario06 wrote:
which picture are closer to the real thing, the k800 or k810?
This k800 R1CB001 give better pics, more closer to real thing, ok but there is much yellow color( 3. pic with R1CB001) i try to use and incandescent wb but again picture is yellow.
Posted by mario06
Genus 4.7
Full Auto Settings
Posted by mario06
gprsman 2.2 + LiveColours™
Full Auto Settings
Posted by reywal
i am beginning to get confuse of these new drivers.
mixing up all these drivers in one thread is not a good idea.
help!
Posted by phoenix1985
On 2007-11-22 11:20:23, gprsman wrote:
camdriver gprsman 2.2 + LiveColours™
download: http://www.sendspace.com/file/mipqn9
change log :
shutter speed for flash 1/10 ,minor effect noise and more Brightness in nocturnal mode.
pics total dark distance 6/7 Metri
pics total dark distance 3/4 Metri
pics total dark distance 6/7 Metri
external ,little sun :
[ This Message was edited by: gprsman on 2007-11-22 10:27 ]
[ This Message was edited by: gprsman on 2007-11-22 10:38 ]
[ This Message was edited by: gprsman on 2007-11-22 11:58 ]
I tested your cam driver, it's good but WB not work, you can fix it
Posted by milan91
mario06, there is much light, put EV on - 1.0 or -0.7
Posted by mario06
On 2007-11-26 11:13:19, milan91 wrote:
mario06, there is much light, put EV on - 1.0 or -0.7
it's a sunny day, i just wanted to test all 4 camdrivers in Full Auto so i could dee the diffrence (let's say honest pictures)
[ This Message was edited by: mario06 on 2007-11-26 10:15 ]
Posted by cuckoo
COM_EVENT(58,07)， i think it is colour saturation.
But,I used it yesterday,no effect!
COM_EVENT(58,07) .the same as 2.5 camdriver!
Posted by number1
On 2007-11-26 11:19:31, cuckoo wrote:
COM_EVENT(58,07)， i think it is colour saturation.
But,I used it yesterday,no effect!
COM_EVENT(58,07) .the same as 2.5 camdriver!
COM_EVENT(58,07) is colour saturation it seems to start working @ COM_EVENT(58,07) u will see a effect if u increase 07 to a higher value
Posted by gprsman
@mario06
I'have reset Brightness ( decreased ) in 2.2 fix :
camdriver gprsman 2.2 fix + LiveColours™.rar : http://www.sendspace.com/file/1vkizh
[ This Message was edited by: gprsman on 2007-11-26 11:17 ]
Posted by gprsman
2.2 fix + live colors to 04 and reset Brightness ,my phone k800@k810 r8ba024.
Posted by quangbh30
very good
Posted by genus
On 2007-11-26 11:27:02, number1 wrote:
On 2007-11-26 11:19:31, cuckoo wrote:
COM_EVENT(58,07)， i think it is colour saturation.
But,I used it yesterday,no effect!
COM_EVENT(58,07) .the same as 2.5 camdriver!
COM_EVENT(58,07) is colour saturation it seems to start working @ COM_EVENT(58,07) u will see a effect if u increase 07 to a higher value
This is because it should not (i think) put under NORM_MODE, if you put it at the right place, when you test the driver, there should be bug which you can see it when you change the effect setting!!! If not, that's mean you put it at the wrong place.
Posted by mario06
@genus
there's something wrong with your new driver, when your taking a macro picture the aiming square doesn't turn green can you please fix it?
[ This Message was edited by: mario06 on 2007-11-26 11:53 ]
Posted by genus
On 2007-11-26 12:08:20, gprsman wrote:
@mario06
I'have reset Brightness ( decreased ) in 2.2 fix :
camdriver gprsman 2.2 fix + LiveColours™.rar : http://www.sendspace.com/file/1vkizh
[ This Message was edited by: gprsman on 2007-11-26 11:17 ]
Your driver doesnt have any enhance colour. I didnt see any colouer enhancement setting.
#UPDATE_COLOR; // updates colour
This is calling for the setting of effect/ enhance colour, but where did you write the setting???? so nothing will happen.
You should put like this before update_iso
UPDATE_COLOUR=
$p5 08
<=====HERE YOU CAN PUT THE SETTING
$cl
$u08
$cx;
[ This Message was edited by: genus on 2007-11-26 11:58 ]
Posted by cuckoo
put it at the right place!where is it?-- (58,07) color
Please tell me ,thanks a lot!
Posted by quangbh30
GPRSman's cam 2.2
Posted by number1
On 2007-11-26 12:47:54, genus wrote:
On 2007-11-26 11:27:02, number1 wrote:
On 2007-11-26 11:19:31, cuckoo wrote:
COM_EVENT(58,07)， i think it is colour saturation.
But,I used it yesterday,no effect!
COM_EVENT(58,07) .the same as 2.5 camdriver!
COM_EVENT(58,07) is colour saturation it seems to start working @ COM_EVENT(58,07) u will see a effect if u increase 07 to a higher value
This is because it should not (i think) put under NORM_MODE, if you put it at the right place, when you test the driver, there should be bug which you can see it when you change the effect setting!!! If not, that's mean you put it at the wrong place.
it's workig fine for me, i really notice the saturated colours when using higher values than 07,
Posted by mario06
On 2007-11-26 12:56:37, quangbh30 wrote:
GPRSman's cam 2.2
can you please post the different settings so that we can understand?
Posted by genus
Here is with the setting of enhance colour from my 4.7 camdriver with WB bug fix
If the COM_EVENT(58,XX) work, it should be like that
Taken inside car
document
Off flash (-0.0ev) i think i do the wrong thing, i should not increase exposure when flash off
Auto
twilightlandscape, cloudy ( taken inside car)
[ This Message was edited by: genus on 2007-11-26 12:04 ]
Posted by cuckoo
// Normal (non-document) mode settings
NORM_MODE
......
UPDATE_COLOUR=
$p5 08
#COM_EVENT(58,07)
$cl
$u08
$cx;
like this??
Posted by gprsman
On 2007-11-26 13:00:02, mario06 wrote:
On 2007-11-26 12:56:37, quangbh30 wrote:
GPRSman's cam 2.2
can you please post the different settings so that we can understand?
Hi mario06
I think first photo in auto mode minor noise ,second photo in twilight portait.
Posted by genus
On 2007-11-26 13:01:43, cuckoo wrote:
// Normal (non-document) mode settings
NORM_MODE
......
UPDATE_COLOUR=
$p5 08
#COM_EVENT(58,07)
$cl
$u08
$cx;
like this??
It should put before the NORM_MODE
I think you do as wat i do in my camdriver easier
http://www.4shared.com/file/3[....]108452/camdriver0_47_gnus.html
or
just change property 8 to this:
seq_set_prop_8 =
$s5 %0
$c5 00 // Effect is normal?
#COM_EVENT(58,07)
$cl
#COM_EVENT(58,00) // Reset PICT_COLORGAIN
$cx
#COM_EVENT(53,$w5);
[ This Message was edited by: genus on 2007-11-26 12:09 ]
Posted by cuckoo
number1，（58，XX），you choose XX 08 or 09?
gens，（58，XX）,where do you put it ?
THANKS~
Posted by quangbh30
yes, sure that
Posted by genus
I think my mod was oversaturated.... this is more colourful than as wat i saw with my eye
But i like this
[ This Message was edited by: genus on 2007-11-26 12:15 ]
Posted by cuckoo
genus，#COM_EVENT(58,07) ，should put before the NORM_MODE ！
you tell me detail course ! thank you
Posted by genus
On 2007-11-26 13:15:04, cuckoo wrote:
genus，#COM_EVENT(58,07) ，should put before the NORM_MODE ！
you tell me detail course ! thank you
I think easier way is change the property 8 as i alrdy reply it.
Posted by cuckoo
thanks!
http://www.4shared.com/file/3[....]108452/camdriver0_47_gnus.html
i can't download!
hanve you another way?
Posted by SEKseries
@genus
can u prove that the color saturation is working by taking 2 same picture with original driver and your driver, those pictures u taken r nice but it cant really prove that the command 58 is the color saturation......
your effort will be appreciated......
Posted by genus
Sure can wait me having my dinner first.
Posted by SEKseries
On 2007-11-26 13:34:01, genus wrote:
Sure can wait me having my dinner first.
sure......but dun try to edit those picture to prove that u r right......jkjk......