Posted by Goldmen
@ hyperion1707,it`s just tryout of the gprsman...
May be he`s not amazing photographer like you...
Are you...?
I`m not....
@gprsman,good job...!
Tnx for the driver!
Keep trying!
[ This Message was edited by: Goldmen on 2007-11-07 21:07 ]
Posted by Guto_ViP
That's true... I think is a good idea if Gprsman creates a new topic for him camdrive.... that's is my opinion...
Coz here he isnt a firts poster, so him camdrive will disappear before some new pages....
Posted by gprsman
@ Goldman
Thanks in order to have appreciated mine camdriver
You have tested?if that of tasks?
Posted by heara
thanks for the camdriver whats the video fps?
Posted by hyperion1707
Here are some pictures taken with Kopritis 3.6 camdriver : indoor without flashlight, daylight macro, twillight landscape and daylight auto
[ This Message was edited by: hyperion1707 on 2007-11-07 22:35 ]
[ This Message was edited by: hyperion1707 on 2007-11-07 22:58 ]
Posted by sowbran
the second picture seen amazing i goes to try the camdriver greetings
Posted by reggiele
[/quote]
Good job GPRSman! I think you should start a new thread so that your modded camdrivers will be known to more people...
Posted by genus
@gprsman
There is nothing with 100% compression in k800i, as mention alrdy. If you set it 100% at fine mode, it will automatically jump back using the compression at normal mode, not fine mode.
the maximum is 95%, as u can see from all the picture exif properties, no one is having 100% compression.
Jpeg compression and sharpness setting are both related to the clear picture, you can try both setting.
Too high in sharpness will cause more noise at normal mode when there is low light or flash on.
250iso seem darker than 400iso, we should make sample of photo from this.
[ This Message was edited by: genus on 2007-11-08 05:05 ]
Posted by dzsemx
got anybody any idea how to disable noise reduction?
Posted by norbi_nw
can u post a link with 3.71 max compression (95% or whatever). ?
Posted by rockygali
@norbi
didnt you see that on the 1st page?
i think its still there...
Posted by gprsman
On 2007-11-08 06:02:02, genus wrote:
@gprsman
There is nothing with 100% compression in k800i, as mention alrdy. If you set it 100% at fine mode, it will automatically jump back using the compression at normal mode, not fine mode.
the maximum is 95%, as u can see from all the picture exif properties, no one is having 100% compression.
Jpeg compression and sharpness setting are both related to the clear picture, you can try both setting.
Too high in sharpness will cause more noise at normal mode when there is low light or flash on.
250iso seem darker than 400iso, we should make sample of photo from this.
[ This Message was edited by: genus on 2007-11-08 05:05 ]
hi genus
ok just 95% jam I have controlled sorry with the customers. I use iso 250 for the photos at a distance to dark the total in house without light and see little pixel, with iso 400 many pixel. un compromise would be iso 320 for photos at a distance creed. EM you have realized it? if you posted me the full script?thanks
best regards .
Posted by number1
to decrease noise with the flash u can, use low iso high shutter speed or high iso low shutterspeed
for iso 250, u need to increase the shutter speed here
// Xenon Flash initialization
#SET_REG(36,17) // AE_MSHUT_SHORT = 1/30
#SET_REG(37,17) // AE_MSHUT_LONG = 1/30
Posted by gprsman
On 2007-11-08 11:41:47, number1 wrote:
to decrease noise with the flash u can, use low iso high shutter speed or high iso low shutterspeed
for iso 250, u need to increase the shutter speed here
// Xenon Flash initialization
#SET_REG(36,17) // AE_MSHUT_SHORT = 1/30
#SET_REG(37,17) // AE_MSHUT_LONG = 1/30
Thanks number1
Posted by genus
That's wat i wan to say, increase expsure time as the driver that i use now
Posted by petrutms
@hyperion, that isn`t RM Valcea? i can tell from last pic... god i miss my hometown...
Posted by grafyman_se
Please , what is the last camdriver of number1...i need the link...thanks.
Posted by genus
Number1, can k800i have the matrix focusing?
Posted by SEKseries
On 2007-11-03 16:35:18, number1 wrote:
we just need to find the k800i's shutter speed command
and replace
#COMMAND(04,$w0)
#COM_EVENT(04,00);
with the correct values then it should work
in the k850 shutter speed is #SET_REG(64,
so try
#SET_REG(64,$w0)
#SET_REG(64,00):
Anyone tried the K850's shutter speed(#SET_REG(64,$w0))on K800???
Is it working???
Posted by SEKseries
On 2007-11-09 07:04:23, genus wrote:
Number1, can k800i have the matrix focusing?
@genus
can u tell me what is matrix focusing???
Posted by rockygali
AFAIK, matrix focusing is the ability of the cam to focus on certain areas of the composition...
some have 5 sectors, some have 9 sectors that can be seen on the electronic viewfinder...
the usual green box we see on all SE phones... in this case.. we see 5 boxes, 9 boxes...
you know what... ASUS V80 has 3 & 5 focus locations... and its only a 2MP.. you can also adjust FREQUENCY... well i dunno wots that for...
Posted by genus
Matrix focusing or also called multi zone metering will give more better exposure to the photo.
Here is the reference: http://en.wikipedia.org/wiki/Metering_mode
Posted by number1
On 2007-11-09 09:22:30, genus wrote:
Matrix focusing or also called multi zone metering will give more better exposure to the photo.
Here is the reference: http://en.wikipedia.org/wiki/Metering_mode
i dno what u mean by matrix focusing but it is possible to mod the autofocus
Posted by rockygali
really?
can you make the focus, focus not only on one section but for example 3 sections of the viewfinder?
you see the green box? can you make 3 of them? simultaneously focus at the same time?!
Posted by number1
it's impossible to make more green boxes, but it is possible to modify the autofocus
[ This Message was edited by: number1 on 2007-11-09 10:26 ]
Posted by rockygali
like broaden the area it captures... a bigger box perhaps... or just relocating the focus?!
Posted by number1
all that the green box etc. is controlled by the firmware not the driver so it's impossibe
Posted by rockygali
so the manner can be controlled.. but not the location?! can you explain further...
ill post pics tomorrow of the ASUS V80 phone having 5 sector focus on the viewfinder...
Posted by number1
yes the manner can be controlled, but not the location
Posted by number1
u can try it add
#SET_REG(32,01) //full range Af scanning
#COM_EVENT(43,20) // fixed focus
add it under macros under // Normal mode settings
Posted by genus
On 2007-11-09 11:00:31, number1 wrote:
it's impossible to make more green boxes, but it is possible to modify the autofocus
[ This Message was edited by: number1 on 2007-11-09 10:26 ]
Ya, it may be possible to mod it. But i dont know how to mod this.
wat does the com_event(43,20) // fixed focus???
[ This Message was edited by: genus on 2007-11-09 12:49 ]
Posted by genus
Then wat does this mean in the driver?
#SET_REG(32,05) // Use multiple AF windows, full range
Posted by gprsman
I do not find the line where to modify this you say to me where please?
we just need to find the k800i's shutter speed command
and replace
#COMMAND(04,$w0)
#COM_EVENT(04,00);
with the correct values then it should work
in the k850 shutter speed is #SET_REG(64,
so try
#SET_REG(64,$w0)
#SET_REG(64,00):
Posted by number1
Focus mode, property 9 tells which part of the Focus operation, property 10, to use i think not 100% sure.
#SET_REG(32,05) // Use multiple AF windows, full range
i'm not sure what that is cause k800i can't use mulitiple Af windows, the full range thing means ful range scanning of the AF system
this is a interesting value in the AF
#COM_EVENT(43,00); // Go to infinity
it can be modified e.g 43,20
this says #COM_EVENT(42,01) whether it's autofocus or straight to infinity
the AF also contains manual focus which isn't used
2 e7 // e7 = MF event
// If we are not using manual focus, then this event should just be ignored
$p0 0a
$c0 01
$s0 03 // in progress
$cl
$c1 00
$s0 04 $go 37 0 // MF succes, turn off AF-LED
$cl
$s0 05 $go 37 0 // MF failed, turn off AF-LED
$cx
$cx
$cl
$s0 03 // in progress
$cx
$cx
$s1 00 // Set reg1 to zero
$s2 00 // Set reg2 to zero
$s3 00 // Set reg3 to zero
$"FOCUSOPERATION_%0_%1_%2_%3";
Posted by SEKseries
On 2007-11-09 14:19:19, number1 wrote:
Focus mode, property 9 tells which part of the Focus operation, property 10, to use i think not 100% sure.
#SET_REG(32,05) // Use multiple AF windows, full range
i'm not sure what that is cause k800i can't use mulitiple Af windows, the full range thing means ful range scanning of the AF system
this is a interesting value in the AF
#COM_EVENT(43,00); // Go to infinity
it can be modified e.g 43,20
this says #COM_EVENT(42,01) whether it's autofocus or straight to infinity
the AF also contains manual focus which isn't used
2 e7 // e7 = MF event
// If we are not using manual focus, then this event should just be ignored
$p0 0a
$c0 01
$s0 03 // in progress
$cl
$c1 00
$s0 04 $go 37 0 // MF succes, turn off AF-LED
$cl
$s0 05 $go 37 0 // MF failed, turn off AF-LED
$cx
$cx
$cl
$s0 03 // in progress
$cx
$cx
$s1 00 // Set reg1 to zero
$s2 00 // Set reg2 to zero
$s3 00 // Set reg3 to zero
$"FOCUSOPERATION_%0_%1_%2_%3";
So any idea to use the MF???
Posted by number1
#COM_EVENT(42,01)<<
#COM_EVENT(42,02)<<< maybe manuel focus but how would it be controled joystick zoom buttons i don't know
Posted by number1
i've improved the focusing, i couldn't do matrix focusing but i made it focus the whole picture instead of one part u can also take macro pics in normal mode without using the macro mode i need to test it a bit more
Posted by Raiderski
sometimes it's worth to look at treasures of K750 modding scene
#COM_EVENT(42,..)
// 0 = stop AF scan and hold position
// 1 = start AF scan
// 2 = stop AF and go to infinity
focus control (can be used as manual focus) is right here:
#COM_EVENT(43,..)
// 00 = infinity
// ..
// 19
// 20 = min. distance
all above values are hex of course
genus
with #SET_REG(32,..) you should be able to select range of autofocus work, well-known:
// 00 = normal range (without macro)
// 01 = full range (normal + macro)
// 02 =
// 03 =
both uknown, probably one of them is macro range only and the second is maybe fast version of full range scan
_________________
W800 CID36 R1BD001
www.tinyurl.com/2c3quo (gallery)
www.tinyurl.com/ysc2wm (driver + config tool)
[ This Message was edited by: Raiderski on 2007-11-09 17:28 ]
Posted by number1
On 2007-11-09 18:22:59, Raiderski wrote:
sometimes it's worth to look at treasures of K750 modding scene
#COM_EVENT(42,..)
// 0 = stop AF scan and hold position
// 1 = start AF scan
// 2 = stop AF and go to infinity
focus control (can be used as manual focus) is right here:
#COM_EVENT(43,..)
// 00 = infinity
// ..
// 19
// 20 = min. distance
all above values are hex of course
genus
with #SET_REG(32,..) you should be able to select range of autofocus work, well-known:
// 00 = normal range (without macro)
// 01 = full range (normal + macro)
// 02 =
// 03 =
both uknown, probably one of them is macro range only and the second is maybe fast version of full range scan
_________________
W800 CID36 R1BD001
http://www.tinyurl.com/2c3quo (gallery)
http://www.tinyurl.com/ysc2wm (driver + config tool)
[ This Message was edited by: Raiderski on 2007-11-09 17:28 ]
thanks the k800i autofocus is quite advance compaired to other phones even the k850i, to complete the chart
#COM_EVENT(42,..)
// 0 = stop AF scan and hold position
// 1 = start AF scan
// 2 = stop AF and go to infinity
focus control (can be used as manual focus) is right here:
#COM_EVENT(43,..)
// 00 = infinity
// ..
// 19
// 20 = min. distance of 5cm
all above values are hex of course
with #SET_REG(32,..) you should be able to select range of autofocus work, well-known:
// 00 = normal range (without macro)
// 01 = full range (normal + macro)
// 04 = not sure Portrait mode focus i think
// 05 = full range macro (document)
Posted by genus
so, which one better???
#SET_REG(32,..)
got
00 //0x32 = AF_SCAN_MODE => 1 Normal
01 //0x32 = AF_SCAN_MODE => 1 Full range
04 //Use multiple AF windows, normal
05 // Use multiple AF windows, full range
[ This Message was edited by: genus on 2007-11-10 05:11 ]
Posted by gprsman
Good work modders
As you can see I am learning at your own posts and comparing the various camdrivers am not an expert but I want to learn.
You can put the exact values and string with a complete line so I can understand all of the latest discoveries so to test the driver on my phone? What is EM? Would be good to eliminate all noise effect ; - ) Thanks to all
@number1 Thanks to you obviously
Your camdriver is excellent but has turned too many colors, as the red is too strong orange and red seems, in my opinion should lower the colors a little but .
B.R.
Posted by opexblue
This "Use multiple AF windows" could be for video, since the cam have to take multiple frame to record movies, IMO.
But I could be wrong.., I haven't test it yet...
Posted by genus
yup, u may right.
Since k800i just have two metering mode only, i try it, but seem dont hv any effect.
Posted by number1
no the different focus settings are for different scenes at the moment i'm using the doc mode AF on normal mode it's working great cause it using the full power of the AF system it can focus on close and long range objects very well
Posted by devya
somehow after i reset back to the original software.
My night shot is better then when i'm using the mod software...
Posted by kuratinja
@gprsman
how bout your cam drivers ?? any advances ?
Posted by gprsman
On 2007-11-10 19:11:09, kuratinja wrote:
@gprsman
how bout your cam drivers ?? any advances ?
That is you have the camdriver originates them and of you want to put of a modder?which you want to put? I have not comprised excuse.
[ This Message was edited by: gprsman on 2007-11-10 18:40 ]
[ This Message was edited by: gprsman on 2007-11-10 19:03 ]
Posted by satan2k3
Guys, need a quick answer. Can we control which iso the camera used for non-flash shot? if yes which line?
Thanks
Posted by kevinarjun
it takes too much time to save picture after taking snap....
Posted by reggiele
waiting for a super camdriver for K800/790...