Posted by kahmeelo
For Those Who Want to Access Far with K310 using DCU-60
Ok guys after doing some hard research and with the help from PabloMDiez I have finally discover how to access far with my K310.
1) Download the Far Manager at Far Manager
2) Download Plug-in SEFP010044 at SEFP010044
After downloading the plugin extract SEPF10044 in the far plugin folder which is located at C:Program FilesFarPlugins.
3) Download CID49.rar file at CID49 and extract SEFP folder to preferred area. Open script folder and copy w300_w810_z550_cid49 file and paste it in
C:Program FilesFarPluginsSEFP010044script and copy the patch and sefp.dll which can be found in the same CID49.rarSEFP folder and paste it in C:Program FilesFarPluginsSEFP010044.
4) Execute the patch and you should see do it. Press do it
5) Download XS++ at and K310 tested ssw at K310 Tested SSW (was tested successfully by me) and extract the file to your preferred area. Run XS++ press start, Turn off phone and hold c and connect cable.
6) Tick Main Firmware and open k310_p3k_dcu.49R.ssw then click flash. Wait for 5 flash blocks and click close
7) Open Far Manager and press Alt F1 and press 0 Select dcu-60 916000 speed and w300_w810_z550_CID49 then [Enter The Matrix]
Select FS and your good to go. Instructions on how to use far can be found at these links
Things you can do to your phone with the FAR Manager
FAR plugin for internal file system access using DCU-60!
DB2010 cid49 with Far + SEFP, Tested with k750
9) To flash back to original firmware which can be found at K310_MAIN_GENERIC_RED49 (You have to register)
10) Open XS++ again and Tick Main Firmware and open K310_R4EA031_MAIN_GENERIC_RED49.mbn then click flash. Wait for 304 flash blocks and click close
11) Other files you might want db2010cid49_4_alpha
db2010cid49brown
[ This Message was edited by: kahmeelo on 2007-02-25 06:42 ]
Posted by deepu
Hi and thx a lot for this post. However I would like to ask if its possible to only delete the operator logo without needing to flash the phone. Could you please help with this request? Thx in advance.
Posted by ady_k4e
Please can u upload "K310 Tested SSW" to filefactory? I can not download it from topsony. Doing this can i use only FS mode with far or i can use both FS and FLASH mode with far? 10x.
Posted by ady_k4e
also do you have the restore file? I need it in order to make a full back-up of firmware for waranty issues. 10x again.
Posted by kahmeelo
ok till try to help you. Do you have to have a premium account to upload files on rapid share
Posted by kahmeelo
| Quote: |
|
you can only access FS
Posted by kahmeelo
K310_test.rar
Posted by ady_k4e
10x for your help.
Posted by ady_k4e
@kahmeelo what erom version do you have? Mine is R3A005.
Posted by kahmeelo
| Quote: |
|
Yes mine is R3A005 and i think all EROM's are compatible. you can find all those information in XS++ when you press start and then connect.
Posted by kahmeelo
K310 all in one
Posted by kahmeelo
please please please please somebody have mercy and post there k310 tpa and ifs settings from far manger please i am begging any one with a k310.
i can see any thing on the phone.
I lost
menu.ml
STARTUP_IMAGE_SEMC
SPLASH
SHUTDOWN_IMAGE_SEMC
camdriver0.dat
dispdriver0.dat
after doing a master reset please any one please please
Posted by kahmeelo
after doing i nice long search i found them
Posted by nichita
thanks man, I can remove operator logo
Posted by danielcps
UHMMMMMM...i've been looking around. Where can i download this k310_p3k_dcu.49R.ssw ? The link that you gave is not wroking. And i'm a paid member of topsony.com. Inside this file is no where to be found. Wait for you reply. Thanks
Posted by nichita
try this
http://www.4shared.com/file/1[....]/cf7715ff/k310_p3k_dcu49R.html
Posted by danielcps
Thanks you so much
Posted by Radumix
why does this step is necessary ? "5) Download XS++ at and K310 tested ssw at K310 Tested SSW (was tested successfully by me) and extract the file to your preferred area. Run XS++ press start, Turn off phone and hold c and connect cable. "..
Posted by Radumix
( my k310 is dead i flashed with xs++ k310_p3k_dcu.49R.ssw please help
Posted by tranced
of course is dead. you have flashed the phone with a main fake. flash it back with an original main for k310
Posted by Radumix
lol why it is dead? now i flashed the File system image with the same K310_R4EA031_MAIN_GENERIC_RED49.mbn lol i forgot i didn find the latest version ..EC.. But how come i didn t lose nothing java etc ?
Posted by Radumix
so it can be accessed with Far only when flashed the main firmware with ssw (a fake one u ve said)?
Posted by tranced
how come you've flashed the FS with the MAIN?
just flash the MAIN with the MAIN file and the FS with the FS file. you know how to finalize, dont you?
Posted by Radumix
lol i did just like in the image http://www.esato.com/board/ui/W9B17hH0V1vvwZ9HLkko.jpg was dead.
then i put the bin in FS and it s ok now .
Posted by tranced
if it's ok then, cheers!
Posted by Radumix
lol wait wait.
i ve done this 1) Download the Far Manager at Far Manager
2) Download Plug-in SEFP010044 at SEFP010044
After downloading the plugin extract SEPF10044 in the far plugin folder which is located at C:Program FilesFarPlugins.
3) Download CID49.rar file at CID49 and extract SEFP folder to preferred area. Open script folder and copy w300_w810_z550_cid49 file and paste it in
C:Program FilesFarPluginsSEFP010044script and copy the patch and sefp.dll which can be found in the same CID49.rarSEFP folder and paste it in C:Program FilesFarPluginsSEFP010044. ..
And i still cant browse my k310
Posted by Radumix
and i was able to access/flash my k310 only with xs v1.0 , v2.01 beta doesn t detect it
_________________
from where can i download for free K310_R4EC001_FS_EUROPE_4_RED49 ?
[ This Message was edited by: Radumix on 2007-07-25 19:01 ]
Posted by tranced
do it with this CID49_Pack
it's all included in this pack. i've flashed a k310 with it and have changed the icons also.
Posted by Radumix
ok interesting so i have to uninstall my Far? did you succed to have more free memory?
Posted by tranced
no, you dont have to uninstall. just use the same far manager it comes with. it will run with NO problems
Posted by Radumix
look the same problems with far from 1 to 4
Posted by tranced
did you flash the FS(with phone xs of course) with the k310_p3k_dcu.49R.ssw?
Posted by Radumix
yes but phone was dead and i flashed it with K310_R4EA031_MAIN_GENERIC_RED49.mbn
_________________
did you flash the FS(with phone xs of course) with the k310_p3k_dcu.49R.ssw???? in the picture is the Main firmware flashed with k310_p3k_dcu.49R.ssw
http://www.esato.com/board/ui/W9B17hH0V1vvwZ9HLkko.jpg is the main firmware not file system hm
[ This Message was edited by: Radumix on 2007-07-25 19:51 ]
Posted by tranced
you need to flash the phone's FS with the k310_p3k_dcu.49R.ssw. then you try with far manager. the the k310_p3k_dcu.49R.ssw is a fake main that allows you to access to the phone's FS so you can change the acoustic, finalize the phone, etc, etc.
Posted by Radumix
Do you mean this
Posted by tranced
yup, but what program is that, phone xs?
Posted by Radumix
yes xs i ve done this without ticking this on the bottom
Posted by tranced
yes.then you flash back with the original main
_________________
40% online
and i got the other half
Esato Awards 2007 RESULTS!
[ This Message was edited by: tranced on 2007-07-25 20:11 ]
Posted by Radumix
so after changing it with far i must revive the k310 flashing like
Posted by Radumix
grr it stopped here
Posted by tranced
now you can with far manager and access to the phone.
what do you wanna do?
Posted by Radumix
now Far doesn t detect the phone at all
(
Posted by tranced
dont worry at all. tell me what you wanna do to your k310.
you havent told nothing yet.
Posted by Radumix
xs++ still detects t but Far no
Posted by Radumix
i want to increase the mms size as i read here We do MMS of any size...
We call in FS\\system\\settings\\messaging\\mms. there are 2 files: int_mms_sett.xml; mms_sett.xml.
We copy them on a hard disk, do the back-up copy of originals.
Further we open int_mms_sett.xml by a notebook govern line:
Further we open mms_sett.xml by a notebook govern line:
Throw the now corrected files back in FS\\system\\settings\\messaging\\mms.// and all the good stuff which can it be made lol but Far doesn t detect it
Posted by tranced
yeah, phone xs detects it. but what does Far Manager say? does it give the same error?
Posted by Radumix
Far doesn it even detect it
_________________
weird
[ This Message was edited by: Radumix on 2007-07-25 20:40 ]
Posted by tranced
dont you get a square like this?
Posted by Radumix
of course also pressing C while connecting cable. the phone is dead lol
Posted by tranced
take out the battery for a minute or so and try again