Posted by Raiderski
amnher
just asking, I thought maybe you didn't used W810 because of those 'small' file sizes. I was wrong
yep, I have massive chaos in my PMs... jizzz I need the secretary!
uhmm, do you remember what was the answer?
Posted by amnher
@ raider
hi
sorry for late reply!
Is it true that other's say that more size more details? lets say same scene same setting
well, yes and no. we are talking about 2MP camera in which details level are limited by weak hardware. +/- 100kb is not really important. you shouldn't pay much attention on file size because most of details above 700kb are not real details but only so callled 'details' formed during compression
Just want to ask, what's supopose to be the average size for w810i compression which is ideal. Lets say a complex scene like forest
Posted by Raiderski
size strongly depends on scene but not only and there's no rule for this. the forest is complex scene, even if file size will be ~800kb this doesn't mean it is saved in great quality. huge amount of details can move jpeg compression process from ~90% to ~75% quality while any other picture with less complex scene can be saved in 90% quality and file size will be 500kb or less
Posted by amnher
I see then about the time taken. I see sarmad tooks about 15sec with 2s shutter speed time while in super driver same shutter speed 2s but only taken at 10 sec. does it mean super driver has less exposure? sf6.5 tooks about 5-7sec
Posted by hillgx
Sf v6.5
[ This Message was edited by: hillgx on 2009-05-07 16:49 ]
Posted by GIANGOX
Posted by Raiderski
amnher
nope, real exposure time is the same in these drivers
Posted by amnher
Then whats the effect? I mean super driver takes 10s while sarmad takes 15s? and sf5.6 takes 5s?
Posted by amnher
Enhance Night Mode test
Taken at a very dark place with FLASH as the only light
SF6.5
ENM ON
5/6/09 update
For EXIF
http://i642.photobucket.com/albums/uu147/amnher/SFDSC03002.jpg
Super Driver 6.7.2
ENM on Fine mode
For EXIF
http://i642.photobucket.com/albums/uu147/amnher/RADSC03001.jpg
Sarmad 6.0
ENM ON
For EXIF
http://i642.photobucket.com/albums/uu147/amnher/SARDSC03003.jpg
All are taken and placed in a table to avoid blur
Notice the ISO and shuter speed
the time needed was, sf at 5-7sec, raider at 8-0sec then ssarmad at 15sec
[ This Message was edited by: amnher on 2009-05-13 04:04 ]
Posted by hillgx
Lantern Fly
Posted by pidjong
hi strong whats the difference between the different SF 6.5. There's this SuperFunction_v6.5_Fixed.rar, SuperFunction_v6.5_Final.rar and SuperFunction_v6.5_Fixed.rar for amnher. Which one to use?
[ This Message was edited by: pidjong on 2009-05-13 14:17 ]
Posted by oug
from where to download the driver?
i am new here
Posted by amnher
The latest one is this link. Cause SF6.5 fix has very low file sizes where quality is compromised
Here it is
Superfunction 6.5Fixed.Update.05/06/2009
http://www.sendspace.com/file/rmog1g
THis is from Strong himself
@ strong I suggest you change the version to either 6.5.1 or 6.6
Posted by Raiderski
hillgx
whoa! it's really weird
Posted by strong
@ strong I suggest you change the version to either 6.5.1 or 6.6
OK here is it superfunction v6.6 only for w810
http://www.4shared.com/file/1[....]perFunction_v66_ONLY_w810.html
Posted by amnher
Thanks for that now people will not be confused anymore
Posted by oug
how to install the drivers.
do i need to patch .
pls reply.
Posted by stam91
oug, you need to upload file camdriver0.dat, according to your phone, to the path ifs/settings/camera/ ... You can use different flashers, such as XS++, JDFlasher (plugin to Far Manager), SeTool etc. GL!
Posted by oug
On 2009-05-16 02:50:56, stam91 wrote:
oug, you need to upload file camdriver0.dat, according to your phone, to the path ifs/settings/camera/ ... You can use different flashers, such as XS++, JDFlasher (plugin to Far Manager), SeTool etc. GL!
thanks for reply!
i will do it after my exams
Posted by amnher
On 2007-10-22 14:15:11, dukempg wrote:
@rajesh14
To take people pics at low light condition, it's better to use the external flash accessory MXE-60. I posted a comparisson here:
http://www.esato.com/board/viewtopic.php?topic=135737&start=7140
The problem is that real people keep moving, so even if you manage to don't shake your hands, people will move and blur the photo. MXE-60 kills the need of stillness, and coupled with post-processing you can make near digital camera quality at night (again, check the samples in the link)
@all
I made a new wallet reference guide. The idea of this guide is to keep it in the wallet, so you don't risk forgetting the guide and missing it when you needed most. This guide contains Ridersky default options plus the "Ultimate Exposure Computer" shutter recommendations adapted to Ridersky drivers. You can get it here:
http://rapidshare.com/files/64337939/Manual_c_mera.doc.html
And here's how it looks like in your wallet!
I high recommend reading the "Ultimate Exposure Computer" here:
http://www.fredparker.com/ultexp1.htm
[ This Message was edited by: dukempg on 2007-10-22 13:19 ]
Can someone reupload this one thanks
Posted by oug
can anyone write tutorial on W810 FLASHING , UNLOCKING , PATCHING , MODDING (if possible with pictures)????
i got one tutorial in which all links are dead
Posted by amnher
How do I use AE lock un SUper Driver 6.7.2 by raiderski supermode just like in superfunction 6.6
Posted by amnher
Kriomag 21.93 20081005
My 5 year old brush
My 9 year old HUB lol
Indoor low light
My poor DCU-60
Posted by amnher
@ strong I think theres a problem with SF 6.6 at this scene. Its in FINE mode but EM seems not working here tried it many times the same ISO 800 as if no EM. In other drivers sarmad,kriomag and raider it is not as noisy as this
Using ENM will fix it but overexpose. Manual speed shutter will but trial and error.
Posted by hillgx
Phone: W810
Software: R4EA031
Driver: SF v6.5
Weather: sunny, cloudy weather
Mode: Macro + Exposure lock + saturation
Posted by pidjong
Hello,
is there a driver who can set manual iso setting for w810? thanks
Posted by amnher
ultra super driver 6.7.u2 has manual ISO
Posted by pidjong
yes i've tested ultra superdriver 6.7.2u2 but it doesn't lock on selected iso. I've set it to ISO > 100 and yet still shows up ISO 80.
Posted by Perzon
Some pics from my D750i. Testing raider 6.72 driver and it's realy good
What do ya think about it ?
Posted by amnher
On 2009-06-09 17:45:41, pidjong wrote:
yes i've tested ultra superdriver 6.7.2u2 but it doesn't lock on selected iso. I've set it to ISO > 100 and yet still shows up ISO 80.
Its because the lowest for our phone is 80 which is better than ISO 100 wherein in w800i its 100. The difference is only marginal
Posted by pidjong
On 2009-06-12 12:05:52, amnher wrote:
Its because the lowest for our phone is 80 which is better than ISO 100 wherein in w800i its 100. The difference is only marginal
yes i know but when its dark it cranks up the iso also and wont stay even set to 100. I want to follow EV computer posted here. Since the phone has a fix aperture, we could only adjust the shutter speed and i want to lock the ISO to 100 or 80 to have the lowest possible noise.
Posted by Perzon
Hi guys. I have big problem with 6.72 Camdriver. Yesterday I change driver to zuza v3, but I dont like it. Now i have raider from camdrivers.wz.cz and my photos look like that
:
When I have good light i have "good" photo :
But in bad light i have that
:
Bad light + Night Mode
:
How to do better shots with this driver ? Can someone teach me how to set focus, profiles, shutter time etc ?
Raider zrobiłeś super sterownik ale nie potrafie zrobić nim dobrej fotki
Doradź coś prosze
Posted by amnher
On 2009-06-13 10:02:54, pidjong wrote:
On 2009-06-12 12:05:52, amnher wrote:
Its because the lowest for our phone is 80 which is better than ISO 100 wherein in w800i its 100. The difference is only marginal
yes i know but when its dark it cranks up the iso also and wont stay even set to 100. I want to follow EV computer posted here. Since the phone has a fix aperture, we could only adjust the shutter speed and i want to lock the ISO to 100 or 80 to have the lowest possible noise.
Actually Ultra Super Driver 6.7.u2 Shutter speed behaves differently than the Super Driver of raider. And EV computer is based on that,
On 2009-06-14 01:18:14, Perzon wrote:
Hi guys. I have big problem with 6.72 Camdriver. Yesterday I change driver to zuza v3, but I dont like it. Now i have raider from camdrivers.wz.cz and my photos look like that
:
When I have good light i have "good" photo :
But in bad light i have that
:
Bad light + Night Mode
:
How to do better shots with this driver ? Can someone teach me how to set focus, profiles, shutter time etc ?
Raider zrobiłeś super sterownik ale nie potrafie zrobić nim dobrej fotki
Doradź coś prosze
Are you using Enhance options? like set +0.7 then zoom at 1.1
Posted by Perzon
No, I just open the camera and do the pic
I dont' understand how to use functions in Raider 6.72
Cam someone teach me please ?
Posted by Junz
i think you should read in doc folder
shortcuts:
EM = enchanced mode
ENM = enchanced night mode
CC = color correction
functions list:
-2.0 = Contrast
1.0 = default
1.1 - 1.9 = minimum - maximum
-1.7 = CC Cyan
1.0 = automatic
1.1 - 4.0 = none - maximum
-1.3 = CC Red
1.0 = automatic
1.1 - 4.0 = none - maximum
-1.0 = Saturation
1.0 = initial
1.1 = default (neutral)
1.2 - 4.0 = desaturated - maximum
-0.7 = CC Yellow
1.0 = automatic
1.1 - 4.0 = none - maximum
-0.3 = CC Blue
1.0 = automatic
1.1 - 4.0 = none - maximum
0.0 = Focus
1.0 = automatic
1.1 = infinity
1.2 - 4.0 = manual (press and free snapshot key to enable/disable zoom 4x)
+0.3 = Exposure Compensation
1.0 = 0.0
1.1 = -3.0
2.0 = 0.0
2.6 = +2.0
+0.7 = Shutter Speed
1.0 = automatic
1.1 = normal mode (EM)
= night mode (ENM)
1.2 - 4.0 = normal mode (1/6400s - 1/8s)
1.2 - 3.0 = night mode (1/40s - 2s, values above 3.0 are unknown)
(press and free snapshot key to enable/disable preview)
+1.0 = Light Metering Method
1.1 = spot
other = default (center-weighted average)
+1.3 = Zoom
1.0 - 4.0 = 1x - 4x
+2.0 = Profile
1.0 = automatic
1.1 = cloudy landscape
1.2 = document
Posted by Perzon
Yea I read it but I still don't know how to set up this punctions . I need a tutorial like this :
Daylight photo of the river - focus 1.1 , exposure 2.0 , profile 1.1 -- Some like this
EDIT : Now I using lpachuong 8.4 and in my opinion this driver takes better pictures than Raiderski. This driver have a lot of manual settings like raider, but takes better shots on auto mode
Some Pics :
[ This Message was edited by: Perzon on 2009-06-15 10:48 ]
Posted by Raiderski
you should start from basic things:
1. subject is far or near? if far then don't use autofocus, use focus infinity like for landscape scenes
2. enable EM/ENM if amount of light is low or very low. enabled mode will prevent high ISO and picture will be much cleaner
every other settings are a secondary matter, sometimes useful, sometimes not
Posted by Perzon
EDIT : I will back to the Raideer 6.72 , but i need instructions
Can u reply in Polish ohere or i PM ?
Będe wdzięczny
[ This Message was edited by: Perzon on 2009-06-15 11:11 ]
Posted by Armageddon
Nice pics Perzon (:
Posted by Perzon
Some new pics from raider : it's better , but still no ideal - How to set up this driver for good photo
Using Macro + Manual focus (2.6) + Saturation
Using Normal Mode + Profile 1.1 (Clouds)
EDIT : Can someone show me photos from Kriomagf 21.91 modded by Raiderski ?
[ This Message was edited by: Perzon on 2009-06-15 20:51 ]
Posted by amnher
Don't use macro with manual focus just use autofocus cause Af works accurately most of the time, use macro on at very closeup shot same with manual focus and always use FINE mode. Otherwise try using sarmad 6.0
[ This Message was edited by: amnher on 2009-06-16 02:07 ]
Posted by shuhailnp
HI
i am new to this forum......
i have taken some photos using my k750@w800
with 2 camera drivers....
here it is.............
first with kiromag 21.93....................fine quality
now comparision..............
1) kriomag 21.93 fine, manual focus
2)kriomag 21.93 normal, manual focus
3) super camera 8.54 ,auto focus
2nd comparison
1) kriomag 21.93 fine, manual focus
2)kriomag 21.93 normal, manual focus
3) super camera 8.54 ,auto focus
some kriomag 21.93 pics manual focus
how is it?
Posted by shuhailnp
some more photos
kriomag 21.93
super camera 8.54
and also i hve made camera shutter and camera focus sound.............
just try it out........
http://rapidshare.com/files/245070146/camera_sound.rar.html
enjoy
Posted by Perzon
On 2009-06-16 03:06:29, amnher wrote:
Don't use macro with manual focus just use autofocus cause Af works accurately most of the time, use macro on at very closeup shot same with manual focus and always use FINE mode. Otherwise try using sarmad 6.0
[ This Message was edited by: amnher on 2009-06-16 02:07 ]
OK but how to use fine mode ? half press + press ?
PS : Nice pics, but too yellow in my opinion
[ This Message was edited by: Perzon on 2009-06-16 08:15 ]
Posted by amnher
On 2009-06-16 09:10:32, Perzon wrote:
On 2009-06-16 03:06:29, amnher wrote:
Don't use macro with manual focus just use autofocus cause Af works accurately most of the time, use macro on at very closeup shot same with manual focus and always use FINE mode. Otherwise try using sarmad 6.0
[ This Message was edited by: amnher on 2009-06-16 02:07 ]
OK but how to use fine mode ? half press + press ?
PS : Nice pics, but too yellow in my opinion
[ This Message was edited by: Perzon on 2009-06-16 08:15 ]
No just take a shot like a standard driver
Fine mode means 95% compression while 90% for normal. SO set it to fine mode then at good lighting take a shot as if it is a stock driver
Posted by Perzon
Fine mode means 95% compression while 90% for normal. SO set it to fine mode then at good lighting take a shot as if it is a stock driver
I understand but HOW TO SET IT
Now I'm testing Strong 5.6 because Raiderski 6.72 on low light have a lot of noise
Posted by Raiderski
noise? sorry but it's not the driver it's you - have you ever read the manual?
in good light driver don't need anything else than auto settings with proper white balance. you can't expect the same results in low light without EM/ENM modes enabled
Posted by Perzon
On 2009-06-17 12:53:10, Raiderski wrote:
noise? sorry but it's not the driver it's you - have you ever read the manual?
in good light driver don't need anything else than auto settings with proper white balance. you can't expect the same results in low light without EM/ENM modes enabled
Yes I read the manual , i do a photo on auto , on night mode , with led and I have a lot of noise
In daylight the pics are beauty So tell me please (najlepiej po polsku) how to set-up Your driver to good , low light photo
Posted by strong
if i remember well you have to set EV(joystick) to +3.0 and zoom key to 1.1 to enable EM at raider drive
Posted by Perzon
On 2009-06-17 13:18:49, strong wrote:
if i remember well you have to set EV(joystick) to +3.0 and zoom key to 1.1 to enable EM at raider drive
You mean 2.0 ? (Profiles) ?