Super camera driver for k750/w800/w810

Posted by Raiderski
DangeloGH
no problem

Posted by DangeloGH
strong
petkoxray
raider
ultra

Posted by Injek
[quote]
On 2008-08-12 20:45:58, Raiderski wrote:
Injek
no noise removing tools - never ever

I was using only long exposure time by manual shutter speed or EM/ENM and that's all. I don't know what is max exposure time for K750 but if text "saving" appeared on screen 6s after you pressed snapshot key this doesn't mean that exposure time was 6s. thanks to K800 now I know that this time is for sure not exposure time only, there's also compression attempts and jpeg creation process. my longest shot took ~8s but when I repeated the same shot it took only ~5s. ~3s less but there wasn't any differences on both snapshots, verified in home on PC monitor

don't pay too much attention on settings, if you think that light is not enough - use EM/ENM and noise will be reduced as much as possible

[...]

Oh okay! I always thought that the the delay between the snapshot and the "saving" was only for exposure time.
Btw I have a w810i.

Okay thanks a lot, I'll follow your advice about EM / ENM

Thanks!

Posted by sarven
with superfunction 6.3 beta2 in night mode press +0.7 and then 1.1 with zoom key screen goes to white.i think this is a bug.

Posted by DangeloGH

On 2008-08-14 13:53:04, sarven wrote:
with superfunction 6.3 beta2 in night mode press +0.7 and then 1.1 with zoom key screen goes to white.i think this is a bug.

owo, my phone restart if i put NM +0.7 - 1.1 and back to 1.0

Posted by tranced

On 2008-08-12 21:36:52, DangeloGH wrote:
strong
petkoxray
raider
ultra

1- this driver is a nice one. in this driver the colors are not that vivid as in the others two. i think it needs more contrast. the vertical stripes are less noticeable than the ultra's.

2- why it's so dark?

3- i can see that this one is similar to the strong's and the vertical stripes are not seen at all. this has a bit of contrast which is a positive.

4- this is the one with more contrast hence the colors are much better than in the others two(imo). but the vertical stripes are more visible than in the others two. the sharpness helps this driver a bit.

Posted by strong

On 2008-08-14 13:53:04, sarven wrote:
with superfunction 6.3 beta2 in night mode press +0.7 and then 1.1 with zoom key screen goes to white.i think this is a bug.

yes this is a bug I will fix it at final version thanks.

@tranced
yes ultra has contrast by default set to 01
mine and raiders set to 00

_________________
k750@w800 R1BC002

http://www.4shared.com/dir/6197354/5c0a18d1/sharing.html
www.camdrivers.wz.cz/

[ This Message was edited by: strong on 2008-08-16 00:04 ]

Posted by tranced

On 2008-08-16 00:59:07, strong wrote:
@tranced
yes ultra has contrast by default set to 01
mine and raiders set to 00

hi mate

ok, thanks for the info. now, wouldnt it be much better if you both add a little bit of contrast? it would give more life to the pics

Posted by unforgiven_sh
i uploaded raiderskis driver into my friends w810
ive edited it and make it a standard driver (non-supermode)
but it takes a lot of time to take a pic when in night mode (about 10 secs), while the normal mode is ok

is this usual?

Posted by Raiderski

On 2008-08-16 03:22:24, tranced wrote:
wouldnt it be much better if you both add a little bit of contrast? it would give more life to the pics

tranced you're right but problem is that contrast in driver is not real contrast only but a lot of brightness too

look:
http://www.esato.com/board/viewtopic.php?topic=170579&start=1155

I reduced contrast to 00 because this value in good light conditions avoids additional brightness and improves a bit details in very bright areas. however you can try 01 and make your choice

Posted by arnarn911

On 2008-08-16 00:59:07, strong wrote:

On 2008-08-14 13:53:04, sarven wrote:
with superfunction 6.3 beta2 in night mode press +0.7 and then 1.1 with zoom key screen goes to white.i think this is a bug.

can you also test if this driver works well with mxe-60? i have 6.2 right now and it doesn't seem synced with the flash from mxe-60

Posted by tranced
@raider: ok i get it. no pain no gain

Posted by DangeloGH

On 2008-08-16 22:31:22, arnarn911 wrote:

On 2008-08-16 00:59:07, strong wrote:

On 2008-08-14 13:53:04, sarven wrote:
with superfunction 6.3 beta2 in night mode press +0.7 and then 1.1 with zoom key screen goes to white.i think this is a bug.

can you also test if this driver works well with mxe-60? i have 6.2 right now and it doesn't seem synced with the flash from mxe-60

@strong
i tested with mxe-60 and dont shot flash with strong's drive

Posted by amarsidhu
strongs 5.6 has perfect sync with mxe-60.
and this driver really clicks nice picture.

Posted by strong
Ok then I will put at final 6.3 the codes for mxe-60 from 5.6

Posted by amarsidhu
Yeah do that please
I have clicked around 500 pics with mxe-60 using 5.6
and it always flashed to my expectation.

thanks for this drive strong

Posted by DangeloGH
@strong
sorry again my friend....
its dont shot flash when i start with shortcusts....
your drive its ok

sorry man....

Posted by arnarn911
Thank you Strong! I am eagerly waiting for your Final 6.3!

Posted by gothenk
@all
hello everybody, im new.... can anybody give me a good cam driver for W810, thanks for helping....

Posted by x.man
for me-it's Strong

Posted by strong
@DangeloGH
no problem again

@gothenk
you have to check and compare which drive is suitable for your phone there are Raiderskis,Kriomags,Sarmads,Spus,Strongs and more modds

I release new beta for general test

SuperFunction BETA3
http://www.sendspace.com/file/dj13a2

_________________
k750@w800 R1BC002

http://www.4shared.com/dir/6197354/5c0a18d1/sharing.html
www.camdrivers.wz.cz/

[ This Message was edited by: strong on 2008-08-19 23:27 ]

Posted by arnarn911
Does this already have the working MXE-60 codes? TIA!

Posted by strong
yes it does

Posted by petkoxray
Picture from test driver

Posted by hendee
Hi strong

I signed up this site to say (prefer, want, etc) something to (from) you...

In my and most of my (8) friends' opinion, your best camdriver was SP 5.5
We always use Kriomag21.9 (we think this is the best of him) and SP 5.5

Because of low noise and good sharpness

So thank you for 5.5 we will newer forget you, Lots of thanks!...

But we think your superfunctions at new camdrivers (4 example 6.2) is better and improwed.

For example shutter speed function is great
and sharpness funtion...

is it poosible if you put new and improwed funtions at 6.2 to 5.5?

So We think, that camdriver will be the best one in the world, thanks again...

if you wanna see our test picures with your driver Please see:

http://forum.donanimhaber.com/m_22913620/mpage_11/tm.htm
Our test topic

My nickname is CrusaderZone there and I always use 5.5 versiyon and my shots are great with your 5.5 driver...

Good works to all developers and moders

[ This Message was edited by: hendee on 2008-08-21 02:06 ]

Posted by strong
@hendee
Thanks for your good words
ok tell me what you want to add to SF v5.5 and what you want to keep
your forum looks nice is this Turkish? can you tell me a translator to English?

Posted by pram_zx
@Raiderski & Strong
Can you guys give your camdriver with MXE-60 Forced Flash ?
I mean, if the setting is auto, its mean always ON, even in bright condition.
Can you guys do that? I really need this feature....
Thanx B4

Posted by hendee
Yep

A Turkish forum for everything about electronics (PC, MpX players, Phone, Bullshits etc.)

And I see that that you are from Greece,
So a "hi" and best wishes from the other side of Aegen Sea

And the topic that I posted the link is our camdriver test topic...
We post our photos and say which camdriver we used for that pic (Sorry for bad english)

Usually we use Kriomag 21.9, Superfunction 5.5 (the best driver ever made

) and 6.2

Last night I tried SP6.3 beta3 and said:
Finally a better driver from 5.5 will release

Because sharpness was great for a 2Mp phone, and I'm waiting for the final version...
And anyway, I will only say good works for you.

But if you want to do something for us, maybe You can add PROFILE (low light etc.), shutter speed function of 6.3, and custom white balance function of 6.3 and Change Scene of 6.3) but thats not important, realy not important because original 5.5 is a great camdriver too

(P.S) Pardon I dont wanna forget, I think there is a bug at drivers after Sp5.5 (for example 5.6, 5.7 6.1, 6.2 etc) When taking photo, it says Saving but some times not saves, But at SP5.5 no problem)

Thank you for listening

[ This Message was edited by: hendee on 2008-08-21 12:25 ]

[ This Message was edited by: hendee on 2008-08-21 12:25 ]

[ This Message was edited by: hendee on 2008-08-21 12:26 ]

Posted by strong
@hendee
My regards to neighbours, ok I will prepare soon an improvent v5.5 drive as you ask and I will post it here, about the bug at my phone all works fine and I cant see the broblem
maybe the fault is at compression ,decrease the jpg compress from 5b to 5a

@all
is there anybody mxe 60 user where test the v6.3 beta3?

@pram_zx
try 6.3 beta3 and tell me the result

Posted by hendee
@ strong

Yep, Thank you so much, You've think about that. That is important, too.
But anyway I think you should finish 6.3.

I've posted the beta3 version to friends at site and they think about me:
Sharpness is great...
so, we are waiting for the final version like others

Posted by strong
Yes I want to finalize the 6.3 but I want to know if mxe 60 works fine

Posted by DangeloGH

On 2008-08-22 12:55:38, strong wrote:
Yes I want to finalize the 6.3 but I want to know if mxe 60 works fine

ill do some test today...
ty

Posted by arnarn911
MXE-60 works fine on your 6.3 beta3 driver. However, I think other users would like to force MXE-60 to always flash even if its bright or shiny.

Posted by moonwalker80
I tested SuperFunction v6.3 BETA3 and i steel think that Ultra_Superdriver_6.7u2 give's a better result. But thats just my opinion.

Posted by amarsidhu
ultra_u2 is around 65% times in sync with MXE-60
where as strong 5.6 is 99% in sync.

[ This Message was edited by: amarsidhu on 2008-08-23 14:58 ]

Posted by moonwalker80
^^^ Yes but I don't use MXE-60

Posted by strong
For my neighbour hendee

SuperFunction v5.5 improved
http://www.sendspace.com/file/3ark3f

and for those people who want to use a simple driver
based at w810 original mod by me Simple v8.5 driver
http://www.sendspace.com/file/sid4u7

Posted by hendee
So, So, So much thank you Strong!....

I've used and tested 6.3 beta 3, 6 days..

And results:
Great!...

I like shutter speed function so much.
And function for MXe-60 is great and it also works at normal Led photos...
So I'm so happy...

Because I know superfunction series are manuel camdrivers
and if we wanna take brilliant pics, we must use the superfuntion series more than 1 month.
Than we can take good pics.

I like 6.3 so much, shutter speed and sharpness is great. Superfuntion series are the best...

Now I will test superfuntion 5.5 improwed
You have done the best Strong, Good Job!..

Posted by sarven
i tested strog 6.3 beta3 and 5.5 imroved,they were the same.But 6.1 fixed color correction have much better realistic colors from them.

Posted by Zsolthy
I have a few question. i just assembled my d750i-k750i monster phone:)
1. can i update the new camera driver into a D750i?(R1AA008) now i have v4.5. or i have to flash k750/w800 fw?
2. how can i update just the camera driver?
3. and can i do with DCU-60?
4. can i backup the actual driver, if the new won't work?
thanks

Posted by Injek
Could someone post a comparison shot between Strong SF 5.5 improved and 6.3 please?

Posted by strong
some pics from SFv6.3

_________________
k750@w800 R1BC002

http://www.4shared.com/dir/6197354/5c0a18d1/sharing.html
www.camdrivers.wz.cz/

[ This Message was edited by: strong on 2008-08-27 23:31 ]

Posted by hendee
Hi strong

I saw your camdriver 6.3 at:
http://www.camdrivers.wz.cz/strong.html

it says: SuperFunction v6.3 BETA but also it says Final versiyon in read me text...

if that cam driver is yours, result are negative I think....

Because I tested over 150 pics last nigt for 6 hour and:

camdriver in w810i folder gives worst results...
Because its based Kiromag w810i and Kiromag w810i not succesfull

camdriver in CID49, color correction versiyon gives best result at dayligth white balance and it is so so so succesfull Good Job

But at automatic white balance, not gives so good results...

camdriver in color auto folder give good result near object but not so good at daylight white balance.

Beta 3 driver gives the best result at Automatic white balance and so good at dayligt white balance:

So I will use:

Beta 3 driver at automatic white balance
and color correction Cıd49 version at daylight pics...

So thank you Strong
if you wanna see test pics with 6.3, feel free to visit:
http://forum.donanimhaber.com/m_22913620/mpage_14/tm.htm

Mine (Crusaderzone), Hunter's, and Phileo Sophia'a shot with 6.3 in that page...

[ This Message was edited by: hendee on 2008-08-28 14:52 ]

Posted by strong
Thanks my friend SF6.3 still beta and optimized only for k750-w800 not for w810
but final version will be for w810

[ This Message was edited by: strong on 2008-08-28 15:48 ]

Posted by hendee
Thank you neighbour...

if you wanna make us test your camdrivers, only say it...

So we can test it at lots of scenes many times, just say it

BUt I will ask some some think:

There are modes "twilight" and "twilight portrait" in your camdriver...

Will we use it at night shots? or is it a kind of scene like sepia, black&white?

Posted by strong
"twilight" and "twilight portrait" is scenes not effects like sepia
of course I want to see tests
Last day I got a k850 so bye! bye! k750 and modd of drivers
I will release soon the last SuperFunction v6.3 final.

_________________
k750@w800 R1BC002

http://www.4shared.com/dir/6197354/5c0a18d1/sharing.html
www.camdrivers.wz.cz/

[ This Message was edited by: strong on 2008-08-30 08:36 ]

[ This Message was edited by: strong on 2008-08-30 08:38 ]

Posted by strong
I made a comparation between w800 SFv6.3 - k850 - canon ixus 70

canon

k850

w800

canon

k850

w800

original sizes here http://www.sendspace.com/file/c3dp77

conclusion: k850 needs modded camdriver

_________________
k850

http://www.4shared.com/dir/6197354/5c0a18d1/sharing.html
www.camdrivers.wz.cz/

[ This Message was edited by: strong on 2008-08-30 12:38 ]

[ This Message was edited by: strong on 2008-08-30 13:16 ]

Posted by strong
Where is evrebody?

Finaly I finished SuperFunction v6.3

you can download here http://www.sendspace.com/file/iums35

also at my shared folder

This is my last modd and there will be no some else

good luck to all

Posted by DangeloGH

On 2008-09-03 12:09:19, strong wrote:
Where is evrebody?

Finaly I finished SuperFunction v6.3

you can download here http://www.sendspace.com/file/iums35

also at my shared folder

This is my last modd and there will be no some else

good luck to all

ty

i�ll miss you and yours camdriver moded...

Posted by wickedsick
First spu, then lpachuong, raiderski and now strong. Good work guys.