Posted by wayne_rooney
hi all,
there is one more problme .... as all know far can't copy more than 28kb for camera driver file..... so any other... idea to copy... chengrongs new 8.54 driver which is of 32kb.....
Posted by hellvy
On 2007-03-26 21:34:41, Kriomag wrote:
hehe, because thats how spot works
it measure amount of light in the picture and set it to be best for central object other objects are not important so can bo overexposured (yes, its the same thing as EV + but done automaticaly). I noticed SPOT is very good for Macros (flowers etc )
Thank you very much for your answer. Now i understand more about spot metering mode, i'll try it with mocro sometime
Posted by cosminfs
Hey ChenGrong,
You're camera drivers are awesome and i've been using 8.53 since the day it was release, and I installed the new version and after experimenting with the new features i notice that when i first start the camera, the autofocus is disabled by default so I have to set it to 1.0 every time i enter the camera. Can you please make autofocus the default setting ? I'm using Cid49 W810 with R4EA031 firmware. Thx alot.
Posted by elevation1
thanks for your work!!! great driver!!! autofocus is great but only few things aren't good... in daylight and with ENM 8.53 is better than 8.54 for me... because in the 8.54 in the night there is more "noise".... i have k750@w800 cid49... thanks again
p.s. what is jpeg level? is the quality of photo? if yes can you put it on 100 or more than 87?
[ This Message was edited by: elevation1 on 2007-03-27 16:28 ]
Posted by cosminfs
And another thing I discovered is that when I use 1.8 profile (wich I assume and hope is the same as in 8.53 and that's the manual exposure scene) and take a pictures without night mode or macro or anything else, just a bare picture, the pictures taken is very dark and grey. I would really appreciate if you can fix this because with 8.53 i've been using 1.8 to replace 1.0 (normal mode) because of the low iso so I had cristal clear pictures but now I can't and i'm very very sad but i have faith in you chengrong! you rock! Here's the indoor picture I took with 1.8 profile:
And this is the same picture with 1.0 profile:
OMG ! I just figured out how to take a picture with 1.8 with low iso so that the light is fine and that is by activating night mode but with minium EV -2.0! Just look at this:
Chengrong, you're officialy a genius and my hero !
And now I again realize (I hope I'm not being a pain in the a$$ for you)
that in indoor it works like a charm(where the light isn't very bright) but what happens when i'll make outdoor pictures where the light is bright ? because nightmode in outdoor dosen't work to good even by using -2 exposure. So you still have to figure out the 1.8 bug.
On 2007-03-27 11:21:11, Badshah wrote:
Manual Shutter speed changed, adjust EV and daylight and night to change value.
i am not getting this part .. can u explain?
Me too, can you please explain this ?
[ This Message was edited by: cosminfs on 2007-03-27 17:18 ]
[ This Message was edited by: cosminfs on 2007-03-27 17:47 ]
Posted by cassanova
hi guys..
all you guys doin' here are ROCKS man!! i wish i can do all the 'modding' myself but well
will never be as good as you guys! Thanks very very a lot!!
I'll see if 8.54 suits me.. thanks all, and special to chengrong and kriomag!!
Keep up the good.. well.. awesome works!!
Posted by Badshah
below guide was for version 8.52 .... can somebody do simillar for 8.54 version?
Posted by cosminfs
This table isn't available anymore for 8.53 and higher versions because super camera mode isn't available anymore in those versions. If I'm mistaken somebody please correct me.
Posted by Badshah
On 2007-03-27 19:16:00, cosminfs wrote:
This table isn't available anymore for 8.53 and higher versions because super camera mode isn't available anymore in those versions. If I'm mistaken somebody please correct me.
if not ... can anybody make a proper guide for using this drivers?
bcoz we have a SUPER CAMERA DRIVER in our mobile .. but we dont know how to rip maximum benefits out of it
Posted by leon12
why is in 8.54 in night mode so much noise? it looks like default night mode, not enhance night mode..
or is it just on my phone?
Posted by elevation1
On 2007-03-27 19:45:15, leon12 wrote:
why is in 8.54 in night mode so much noise? it looks like default night mode, not enhance night mode..
or is it just on my phone?
also for me... more "noise" than 8.53
[ This Message was edited by: elevation1 on 2007-03-27 18:56 ]
Posted by leon12
well, it seems that we find a bug.. or we dont know how to use the new drv, or our phones dont like the new version
Posted by BOSSHOGG
The manual focus is great and everything seems much faster in 8.54, but my k750 just exits when i take the picture
My phone's cid36, not matching fw though. 8.53 works fine, any way to fix it?
Posted by Badshah
all respect to hard work by chengrong & kriamog
but here is small comparison between
8.54 & 7.7f with ENM & CC latest by kriamog
-----------------
8.54 Macro + Nigh Mode ON
7.7 Night Only
7.7 Night + Macro [ENM]
-------------
so at the moment i will stick with 7.7 by kriamog ... also daypics with 7.7 were great
give it a new name kriamog bro ... maybe as version 7.8
[ This Message was edited by: Badshah on 2007-03-27 20:01 ]
Posted by cosminfs
Does this 7.7 version of wich you are talking about works on a W810 ? Maybe I'll give it a try.
Posted by tranced
On 2007-03-27 20:06:00, BOSSHOGG wrote:
The manual focus is great and everything seems much faster in 8.54, but my k750 just exits when i take the picture
My phone's cid36, not matching fw though. 8.53 works fine, any way to fix it?
mine's cid36 as well and it works as a charm!!! are you sure you are using the 8.54 for CID36 R1CA021?
Posted by obentou
But as you can see, the ENM driver you pointed out sacrifices focus for the noise reduction. It's quite clear that the other two photos taken have an advantage in terms of the macro.
On 2007-03-27 20:52:02, Badshah wrote:
all respect to hard work by chengrong & kriamog
but here is small comparison between
8.54 & 7.7f with ENM & CC latest by kriamog
-----------------
8.54 Macro + Nigh Mode ON
7.7 Night Only
7.7 Night + Macro [ENM]
-------------
so at the moment i will stick with 7.7 by kriamog ... also daypics with 7.7 were great
give it a new name kriamog bro ... maybe as version 7.8
[ This Message was edited by: Badshah on 2007-03-27 20:01 ]
Posted by Kriomag
On 2007-03-27 19:45:15, leon12 wrote:
why is in 8.54 in night mode so much noise? it looks like default night mode, not enhance night mode..
or is it just on my phone?
i have the same problem :/ iso100 but noise like iso800 :/
Posted by Kriomag
On 2007-03-27 21:17:40, Kriomag wrote:
On 2007-03-27 19:45:15, leon12 wrote:
why is in 8.54 in night mode so much noise? it looks like default night mode, not enhance night mode..
or is it just on my phone?
i have the same problem :/ iso100 but noise like iso800 :/
but dont be afraid
Cheng Rong did the dirty work and now i have something to work on lol
i belive in few days i will mix 7.7 with 8.53 and 8.54 :> hehe, for now i can tell that i first thing i will do is cut LED ENM and paste it to 7.7 moded by me
(i noticed chengrong did the same thing i did, led whitebalance from 05 to 00 = auto - which was too blue for some folks but good for me lol)
Posted by salambaba
Super Sport Mode with 8.54 :
1 - zoom:1.0 --> Turn on : Night mode + Macro mode
2 - Change zoom from 1.0 to 1.1
3 - Turn off : Night mode + Macro mode
Now you can take the best Sport mode .
( focus is disable fully )
Posted by Mr.Kája
Nice, thank you ChengRong for the R2B001 version:) Finally supercam driver, which works even when I shut down camera with macro and video mode. And now, I have no fear about it...awesome;)
_________________
Well, I don't now much about IT, but I'm happy O:o) Well, and for support-I have k750i, CID49Brown and R1CA021 firmware;)
[ This Message was edited by: Mr.Kája on 2007-03-27 23:38 ]
Posted by Badshah
On 2007-03-27 21:16:45, obentou wrote:
But as you can see, the ENM driver you pointed out sacrifices focus for the noise reduction. It's quite clear that the other two photos taken have an advantage in terms of the macro.
3rd pic's settings is Macro + Night mode ... same settings as 8.54 ....
Macro + Night Mode = ENM was termed by kriamog as Enhanced Night Mode
the quality is very diff than 8.54
8.54 Macro + Night quality is same as 7.7 night without macro
so as u see in 1st pic macro was ON but still useless in 8.54.... compared to 7.7.
[ This Message was edited by: Badshah on 2007-03-27 20:50 ]
Posted by salambaba
On 2007-03-27 21:49:41, Badshah wrote:
On 2007-03-27 21:16:45, obentou wrote:
But as you can see, the ENM driver you pointed out sacrifices focus for the noise reduction. It's quite clear that the other two photos taken have an advantage in terms of the macro.
3rd pic's settings is Macro + Night mode ... same settings as 8.54 ....
Macro + Night Mode = ENM was termed by kriamog as Enhanced Night Mode
the quality is very diff than 8.54
8.54 Macro + Night quality is same as 7.7 night without macro
so as u see in 1st pic macro was ON but still useless in 8.54.... compared to 7.7.
[ This Message was edited by: Badshah on 2007-03-27 20:50 ]
But in 8.54 if u want to enable ENM u must go to 1.8Zoom and turn on Night mode .
Posted by paparazy
[ This Message was edited by: paparazy on 2007-03-28 00:06 ]
Posted by salambaba
The 8.54 is the best but the ENM has low quality in compare of
8.53 and 1.0 paparazy :
ENM in 1.0 paparazy :
ENM in 8.53 :
ENM in 8.54 :
Whats ur idea ?
Posted by paparazy
@ hi all
fix led colors for 8.54 perfect night led photos!
//For Led
05 01 00 23 01 $f $r2 1 1
$m0 1 $/0 28
$c0 00
$m0 1 $/0 03
$c0 00
$cl
$s0 3d $-0 r1
06 02 00 01 03 51 #CMD_END // alterado
06 02 00 01 $w0 04 #CMD_END
Posted by paparazy
// start driver tunned v8.54 for k750 cid36 r1ca021
//Support 10 Scences: 1.0 NightPortrait,1.1 normal,1.2 Landscape,1.3 Portrait,1.4 Nightscene,1.5 sports,1.6 Beach/snow, 1.7 Document,1.8 Manual Exposure Scence,1.9 scence cold ,2.0 scence green grass
//07-01-24 add ISO Support; change Manual Exporsure Time to 50+
//07-01-24 add AE Lock for Enchance Night
//Feb 26,2007 repaired the defect of WB failure,
//Feb 27,2007 Fixed a bug with viewfinder became darkness after snapshot.
//Mar 03,2007 add manual focus ,thanks zy2k.
//Mar 27,2007 add two scence green grass and cold
//Mar 27,2007 by PaParazy - contrast, + AE, fix Led colors, fix profile scences
info_name=KNC 201 15;
info_vendor=Cheng Rong;
info_major_ver=8;
info_minor_ver=36;
cam_power_on_0 = 5, 0, 0, 1, 5;
cam_power_on_1 = 5, 1, 35, 1, 0;
cam_power_on_2 = 5, 2, 35, 1, 5;
cam_power_on_3 = 5, 5, 6, 1, 10;
cam_power_on_4 = 5, 1, 46, 1, 0;
cam_power_on_5 = 5, 2, 46, 1, 5;
cam_power_on_6 = 5, 3, 1, 32C8, 5;
cam_power_on_7 = 5, 0, 0, 0, 1F4;
cam_power_off_0= 5, 0, 0, 1, 0;
cam_power_off_1= 5, 3, 1, 1, 0;
cam_power_off_2= 5, 1, 46, 1, 0;
cam_power_off_3= 5, 2, 46, 0, 0;
cam_power_off_4= 5, 5, 6, 0, 0;
cam_power_off_5= 5, 1, 35, 1, 0;
cam_power_off_6= 5, 2, 35, 0, 0;
cam_i2c_address=1F;
cam_vf_clock_freq=1,32C8;
cam_ss_clock_freq=1,32C8;
cam_vf_format=B100;
cam_ss_format=0001;
cam_ss_format_9=B100;
cam_ss_format_30=B100;
cam_data_offset_9=0;
cam_data_offset_30=0;
cam_ss_sync_30=3;
cam_data_offset=2;
cam_vf_sync=5;
cam_ss_sync=f;
cam_ss_sync_9=7;
cam_ss_retries=9;
cam_ss_jpeg_buf_size_1=3A98;
cam_ss_jpeg_buf_size_2=88B8;
cam_ss_jpeg_buf_size_3=186A0;
cam_ss_jpeg_buf_size_4=249f0;
cam_ss_jpeg_buf_size_5=61A80;
cam_ss_jpeg_buf_size_6=927C0;
cam_ss_jpeg_buf_size_7=927C0;
cam_ss_jpeg_buf_size_8=927C0;
sup_sizes=1[64,3C,0],2[A0,78,0],3[140,F0,0],
4[280,1E0,0],5[500,3C0,0],6[640,4B0,0],
7[660,440,0],8[660,4C8,0],9[280,1E0,0],
11[64,3C,5DC],12[A0,78,5DC],13[DC,92,5DC],
14[DC,A5,5DC],15[EC,B1,5DC],
21[80,60,3E8],22[80,60,2EE],23[B0,90,3E8],
24[B0,90,2EE],30[4E,90,0];
sup_properties=0[0,15,9],1[0,6,0],2[0,3,1],3[0,1,0],
4[0,1,0],5[0,1,0],6[a,28,a],7[0,1,0],
8[0,4,0],9[0,4,0],a[0,2,0],b[0,4,0],
c[0,ff,0],d[0,1,0],e[0,2,0],f[0,1,0],
10[0,7,0],11[0,d,0],12[0,ff,0],13[0,15,7],
14[0,16,8],15[0,16,8],18[0,7,0],19[0,1,0];
CMD_END=$f $d0005;
VR_NORMAL_MODE_FR=3C;
VR_NIGHT_MODE_FR=1E;
READ_AF_STATUS=05 01 00 03 03 $f $r4 4 4 4 5
$c5 E6 $cl $s4 03 $cx;
READ_JPEG_STATUS=05 01 00 03 03 $f $r4 4 4 4 5
$c5 E3 $cl $d0005 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E3 $cl $d0005 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E3 $cl $d0005 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E3 $cl $d0005 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E3 $cl $d0005 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E3 $cl $d0005 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E3 $cl $s4 01
$cx $cx $cx $cx $cx $cx $cx;
WAIT_FOR_MODE_TRANSITION=05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d0010 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d0010 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d0010 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d0040 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d0040 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EA $cl $d0100
$cx $cx $cx $cx $cx $cx $cx $cx $cx $cx
$cx $cx $cx $cx $cx $cx $cx $cx $cx $cx
$cx $cx $cx $cx $cx $cx $cx $cx $cx $cx;
WAIT_FOR_CAPT_START=05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d0002 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d0002 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d0002 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d0002 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d000a 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d0010 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d0010 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d0010 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d0040 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d0040 05 01 00 03 03 $f $r4 4 4 4 5
$c5 E4 $cl $d0100
$cx $cx $cx $cx $cx $cx $cx $cx $cx $cx
$cx $cx $cx $cx $cx $cx $cx $cx $cx $cx
$cx $cx $cx $cx $cx $cx $cx $cx $cx $cx;
WAIT_FOR_POWER_SAVE_ENTER=05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0010 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0010 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0010 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0010 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0010 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0040 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0040 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0040 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0040 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0040 05 01 00 03 03 $f $r4 4 4 4 5
$c5 ED $cl $d0100
$cx $cx $cx $cx $cx $cx $cx $cx $cx $cx
$cx $cx $cx $cx $cx $cx $cx $cx $cx $cx;
WAIT_FOR_POWER_SAVE_LEAVE=05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0020 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0040 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0040 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0040 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0040 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0040 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0040 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0100 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0200 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0400 05 01 00 03 03 $f $r4 4 4 4 5
$c5 EC $cl $d0800
$cx $cx $cx $cx $cx $cx $cx $cx $cx $cx
$cx $cx $cx $cx $cx $cx $cx $cx $cx $cx;
GET_SENSOR_VERSION= 05 01 00 36 01 $f $r2 0 0
$c0 00
05 01 00 36 01 $f $r2 0 0
$c0 00
05 01 00 36 01 $f $r2 0 0
$>0 7
$c0 01
$sf 01
$cl
$sf 00
$cx
$cl
$>0 7
$c0 01
$sf 01
$cl
$sf 00
$cx
$cx
$cl
$>0 7
$c0 01
$sf 01
$cl
$sf 00
$cx
$cx;
//Super Mode
SM_INIT_SHARPNESS=06 02 00 01 04 56 #CMD_END;
SM_INIT_DOCUMENT_SHARPNESS=06 02 00 01 05 56 #CMD_END;
SM_AUTOUPDATE_WB=$p1 01
$c1 00 $cl
$d00c8
$u 01
$cx;
SM_NORMAL_MODE=06 02 00 01 00 55 #CMD_END // alterado
#SM_INIT_SHARPNESS
#SM_AUTOUPDATE_WB
$u 00
$z2
$c2 21 $cl
$c2 22 $cl
$c2 23 $cl
$c2 24 $cl
$u 07
$cx $cx $cx $cx;
SM_DOCUMENT_MODE=06 02 00 01 00 04 #CMD_END
#SM_INIT_DOCUMENT_SHARPNESS
06 02 00 01 01 55 #CMD_END // alterado
06 02 00 01 02 06 #CMD_END
#SM_AUTOUPDATE_WB
$u 00
$z1
$c2 21 $cl
$c2 22 $cl
$c2 23 $cl
$c2 24 $cl
$u 07
$cx $cx $cx $cx;
SM_SELECT_FUNCTION=
$c6 00
06 02 00 01 03 51 #CMD_END // alterado
#SM_NORMAL_MODE $cl
$c6 01
06 02 00 01 00 51 #CMD_END // alterado
#SM_NORMAL_MODE
$cl
$c6 02
06 02 00 01 06 51 #CMD_END
#SM_NORMAL_MODE $cl
$c6 03
06 02 00 01 01 51 #CMD_END // alterado
#SM_NORMAL_MODE $cl
$c6 04
06 02 00 01 04 51 #CMD_END
#SM_NORMAL_MODE $cl
$c6 05
06 02 00 01 05 51 #CMD_END
#SM_NORMAL_MODE $cl
$c6 06
06 02 00 01 02 51 #CMD_END
#SM_NORMAL_MODE $cl
$c6 07
06 02 00 01 00 51 #CMD_END
#SM_DOCUMENT_MODE $cl
$c6 08
06 02 00 01 00 51 #CMD_END
#SM_NORMAL_MODE $cl
$c6 09
06 02 00 01 00 51 #CMD_END
#SM_NORMAL_MODE
05 02 00 20 F4 #CMD_END
05 02 00 21 E0 #CMD_END
06 02 00 01 01 13 #CMD_END
$cl
$c6 0a
06 02 00 01 00 51 #CMD_END
#SM_NORMAL_MODE
05 02 00 20 0F #CMD_END
05 02 00 21 0F #CMD_END
06 02 00 01 01 13 #CMD_END
$cx $cx $cx $cx $cx $cx $cx $cx $cx $cx $cx;
SM_RESTORE_ENHANCE_NIGHT=
$c6 00
06 02 00 01 03 51 #CMD_END $cl // alterado
$c6 01
06 02 00 01 00 51 #CMD_END $cl // alterado
$c6 02
06 02 00 01 06 51 #CMD_END $cl
$c6 03
06 02 00 01 01 51 #CMD_END $cl // alterado
$c6 04
06 02 00 01 04 51 #CMD_END $cl
$c6 05
06 02 00 01 05 51 #CMD_END $cl
$c6 06
06 02 00 01 02 51 #CMD_END $cl
06 02 00 01 00 51 #CMD_END
$cx $cx $cx $cx $cx $cx $cx;
SM_CHANGE_ZOOM_FOCUS=$s0 %0 $p1 07
$c1 00
$c0 0a
06 02 00 01 80 61 #CMD_END
$cl
$s0 2a $-0 %0 $*0 02 $+0 80 06 02 00 01 $w0 61 #CMD_END
$cx
$cl
$c0 0a
06 02 00 01 00 43 #CMD_END
$ba 00 1 1
$cl
$-0 0b 06 02 00 01 $w0 43 #CMD_END
$ba 01 1 1
$cx
$cx;
SM_LOCK_AE=$z1
$c1 21 $cl
$c1 22 $cl
$c1 23 $cl
$c1 24 $cl
$p1 0d
$c1 00 $p1 0e
$c1 00
$c6 03 $cl
$c6 04 $cl
$c6 05 $cl
$c6 08 $cl
06 02 00 01 01 01 #CMD_END
$cx $cx $cx $cx
$cx $cx
$cx $cx $cx $cx;
SM_UNLOCK_AE=06 02 00 01 00 01 #CMD_END;
SM_ENHANCE_NIGHT_MODE=$p1 07
$c1 01
$c6 08 $cl
$c6 03 $cl
$c6 05 $cl
$p1 0d
$c1 00 $p1 0e
$c1 00
05 01 00 23 01 $f $r2 1 1
$m0 1 $/0 28
$c0 00
$m0 1 $/0 03
$c0 00
$cl
$s0 40 $-0 r1
06 02 00 01 04 51 #CMD_END
06 02 00 01 $w0 04 #CMD_END
$cx
$cx
$cl
$cx
$cl
//For Led
05 01 00 23 01 $f $r2 1 1
$m0 1 $/0 28
$c0 00
$m0 1 $/0 03
$c0 00
$cl
$s0 3d $-0 r1
06 02 00 01 03 51 #CMD_END // alterado
06 02 00 01 $w0 04 #CMD_END
$cx
$cx
$cx
$cx $cx $cx
$cx;
SM_ENHANCE_SHUTTER_MODE=$p1 07
$c1 01
$c6 08
$p0 00 $+0 1E
06 02 00 01 04 51 $f
06 02 00 01 $w0 04 $f
$cx
$cl
$c6 08
$p0 00 $+0 0F
06 02 00 01 04 51 $f
06 02 00 01 $w0 04 $f
$cx
$cx;
seq_ping=;
seq_init=05 02 00 0B 88 #CMD_END 05 02 00 0C 13 #CMD_END // 0x1388 5000d milliseconds
06 02 00 01 00 52 #CMD_END
05 02 00 18 00 #CMD_END
06 02 00 01 03 51 #CMD_END // alterado
06 02 00 01 04 56 #CMD_END
06 02 00 01 00 55 #CMD_END // alterado
// 06 02 00 01 00 41 #CMD_END
06 02 00 01 00 04 #CMD_END
#GET_SENSOR_VERSION;
seq_set_prop_0=$s0 %0 $-0 07 06 02 00 01 $w0 06 #CMD_END; // alterado
seq_get_prop_0 = $s1 08 $s0 36;
seq_set_prop_1_0=06 02 00 01 00 11 #CMD_END;
seq_set_prop_1_1=06 02 00 01 03 11 #CMD_END;
seq_set_prop_1_2=06 02 00 01 04 11 #CMD_END;
seq_set_prop_1_3=06 02 00 01 05 11 #CMD_END;
seq_set_prop_1_4=06 02 00 01 06 11 #CMD_END;
seq_set_prop_1_5=06 02 00 01 07 11 #CMD_END;
seq_set_prop_1_6=06 02 00 01 01 11 #CMD_END;
seq_set_prop_2_0=06 02 00 01 01 21 #CMD_END;
seq_set_prop_2_1=06 02 00 01 02 21 #CMD_END;
seq_set_prop_2_2=06 02 00 01 03 21 #CMD_END;
seq_set_prop_2_3=06 02 00 01 00 21 #CMD_END;
seq_set_prop_3=$s0 00 $b0 %0 1 1 $b0 %0 3 1 $p1 04
$c1 00 $b0 00 0 1 $b0 00 2 1 $cl
$b0 01 0 1 $b0 01 2 1 $cx
06 02 00 01 $w0 52 #CMD_END;
seq_set_prop_4=$s0 00 $b0 %0 0 1 $b0 %0 2 1 $p1 03
$c1 00 $b0 00 1 1 $b0 00 3 1 $cl
$b0 01 1 1 $b0 01 3 1 $cx
06 02 00 01 $w0 52 #CMD_END;
SET_JPEG_MAX=06 02 00 0D !1 !0 #CMD_END;
SET_JPEG_MIN=06 02 00 0F !1 !0 #CMD_END;
SET_JPEG_AVG=06 02 00 11 !1 !0 #CMD_END;
SET_JPEG_QUALITY= $p1 0e
$c1 01
$s2 55
#SET_JPEG_MIN(00,01)
$cx
$p1 07
$c1 01
$c6 08
$s2 4b
$cx $cx
07 02 00 13 $w2 $w2 $w2 #CMD_END;
seq_set_prop_5_0=$z0
$s2 57
$c0 01 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,0F) #SET_JPEG_AVG(00,05) #SET_JPEG_QUALITY $cl
$c0 02 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,19) #SET_JPEG_AVG(00,08) #SET_JPEG_QUALITY $cl
$c0 03 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,28) #SET_JPEG_AVG(00,0F) #SET_JPEG_QUALITY $cl
$c0 04 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,96) #SET_JPEG_AVG(00,37) #SET_JPEG_QUALITY $cl
$c0 05 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,40) #SET_JPEG_AVG(00,96) #SET_JPEG_QUALITY $cl
$c0 06 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,08) #SET_JPEG_AVG(01,72) #SET_JPEG_QUALITY $cl
$c0 07 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,e0) #SET_JPEG_AVG(01,5e) #SET_JPEG_QUALITY $cl
$c0 08 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,1c) #SET_JPEG_AVG(01,90) #SET_JPEG_QUALITY
$cx $cx $cx $cx $cx $cx $cx $cx
06 02 00 01 00 08 #CMD_END;
seq_set_prop_5_1=$z0
$s2 57
$c0 01 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,0F) #SET_JPEG_AVG(00,08) #SET_JPEG_QUALITY $cl
$c0 02 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,19) #SET_JPEG_AVG(00,0F) #SET_JPEG_QUALITY $cl
$c0 03 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,28) #SET_JPEG_AVG(00,14) #SET_JPEG_QUALITY $cl
$c0 04 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,96) #SET_JPEG_AVG(00,50) #SET_JPEG_QUALITY $cl
$c0 05 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,54) #SET_JPEG_AVG(01,2C) #SET_JPEG_QUALITY $cl
$c0 06 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,1c) #SET_JPEG_AVG(01,cc) #SET_JPEG_QUALITY $cl
$c0 07 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,f4) #SET_JPEG_AVG(01,a4) #SET_JPEG_QUALITY $cl
$c0 08 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,30) #SET_JPEG_AVG(01,e0) #SET_JPEG_QUALITY
$cx $cx $cx $cx $cx $cx $cx $cx
06 02 00 01 01 08 #CMD_END;
seq_set_prop_6=$p2 09
$c2 00
$s0 %0 $-0 0a $m6 0
#SM_SELECT_FUNCTION
$cl
$m0 a $b0 00 1 7
$c0 00
#SM_CHANGE_ZOOM_FOCUS
$cl $ba 00 0 1
$cx
$cx;
seq_set_prop_7_0=06 02 00 01 28 03 #CMD_END
05 02 00 08 3C #CMD_END
06 02 00 01 01 34 #CMD_END
#WAIT_FOR_MODE_TRANSITION;
seq_set_prop_7_1=06 02 00 01 0a 03 #CMD_END
05 02 00 08 1e #CMD_END
06 02 00 01 01 34 #CMD_END
#WAIT_FOR_MODE_TRANSITION;
seq_set_prop_8=06 02 00 01 %0 53 #CMD_END;
seq_set_prop_9=06 02 00 01 %0 41 #CMD_END $ba 01 0 1;
SM_MANUAL_FOCUS_STATUS=$m0 a $b0 00 0 1 $b0 00 2 6;
seq_set_prop_a_0=#SM_MANUAL_FOCUS_STATUS $c0 00 06 02 00 01 02 42 #CMD_END $cx;
seq_set_prop_a_1=#SM_MANUAL_FOCUS_STATUS $c0 00 06 02 00 01 01 42 #CMD_END $cx #SM_LOCK_AE;
seq_set_prop_a_2=#SM_MANUAL_FOCUS_STATUS $c0 00 06 02 00 01 00 42 #CMD_END $cx #SM_UNLOCK_AE;
seq_get_prop_a=#SM_MANUAL_FOCUS_STATUS
$c0 00
#READ_AF_STATUS $m0 4 $c0 03 $cl $+0 04 $cx
$cl
$s0 04
$cx;
seq_get_prop_b=05 01 00 25 04 $f $r5 0 0 1 2 3
$c3 ff
05 01 00 25 04 $f $r5 0 0 1 2 3
$c3 ff
05 01 00 25 04 $f $r5 0 0 1 2 3
$c3 ff
05 01 00 25 04 $f $r5 0 0 1 2 3
$c3 ff
05 01 00 25 04 $f $r5 0 0 1 2 3
$cx
$cx
$cx
$cx;
seq_get_prop_c=05 01 00 29 03 $f $r4 0 0 1 2
$c2 ff
05 01 00 29 03 $f $r4 0 0 1 2
$c2 ff
05 01 00 29 03 $f $r4 0 0 1 2
$c2 ff
05 01 00 29 03 $f $r4 0 0 1 2
$c2 ff
05 01 00 29 03 $f $r4 0 0 1 2
$cx
$cx
$cx
$cx
$m 3 9
$m 2 8;
LED_WB_SET = 06 02 00 01 00 11 #CMD_END
05 02 00 20 03 #CMD_END
05 02 00 21 04 #CMD_END
06 02 00 01 01 13 #CMD_END;
LED_WB_UNSET =05 02 00 20 00 #CMD_END
05 02 00 21 00 #CMD_END
06 02 00 01 01 13 #CMD_END
$u 01;
seq_set_prop_d=;
seq_set_prop_e_0= 06 02 00 01 00 5a #CMD_END;
seq_set_prop_e_1= 06 02 00 01 04 5a #CMD_END;
seq_set_prop_e_2= 06 02 00 01 03 5a #CMD_END;
seq_set_prop_f_0= $cf 00
06 02 00 01 00 5C #CMD_END #WAIT_FOR_POWER_SAVE_LEAVE
03 55 AA #CMD_END
07 04 20 80 00 05 0E #CMD_END
07 04 98 12 04 00 00 #CMD_END
$cl
06 02 00 01 00 5C #CMD_END #WAIT_FOR_POWER_SAVE_LEAVE
$cx;
seq_set_prop_f_1=06 02 00 01 81 34 #CMD_END
#WAIT_FOR_MODE_TRANSITION
06 02 00 01 00 53 #CMD_END
06 02 00 01 01 5C #CMD_END #WAIT_FOR_POWER_SAVE_ENTER;
seq_set_prop_10=06 02 00 01 %0 51 #CMD_END;
seq_set_prop_11_0=06 02 00 01 00 05 #CMD_END;
seq_set_prop_11_1=06 02 00 01 01 05 #CMD_END;
seq_set_prop_11_2=06 02 00 01 04 05 #CMD_END;
seq_set_prop_11_3=06 02 00 01 07 05 #CMD_END;
seq_set_prop_11_4=06 02 00 01 0a 05 #CMD_END;
seq_set_prop_11_5=06 02 00 01 0d 05 #CMD_END;
seq_set_prop_11_6=06 02 00 01 02 05 #CMD_END;
seq_set_prop_11_7=06 02 00 01 03 05 #CMD_END;
seq_set_prop_11_8=06 02 00 01 05 05 #CMD_END;
seq_set_prop_11_9=06 02 00 01 06 05 #CMD_END;
seq_set_prop_11_a=06 02 00 01 08 05 #CMD_END;
seq_set_prop_11_b=06 02 00 01 09 05 #CMD_END;
seq_set_prop_11_c=06 02 00 01 0b 05 #CMD_END;
seq_set_prop_11_d=06 02 00 01 0c 05 #CMD_END;
seq_get_prop_12= 05 01 00 22 02 $f $r3 0 0 1;
seq_set_prop_13=06 02 00 01 %0 54 #CMD_END;
seq_set_prop_14=$s0 %0 $-0 08 06 02 00 01 $w0 55 #CMD_END;
seq_set_prop_15=$s0 %0 $-0 08 06 02 00 01 $w0 56 #CMD_END;
seq_get_prop_16=05 01 00 2E 01 $f $r2 0 0
06 02 00 01 01 42 $f $d0080
05 01 00 2E 01 $f $r2 1 1 $d0080
05 01 00 2E 01 $f $r2 2 2 $d0710
05 01 00 2E 01 $f $r2 3 3;
seq_get_prop_17=05 01 00 2E 01 $f $r2 0 0;
seq_set_prop_18=;
seq_get_prop_19= $cf 01
$s0 01
$cl $s0 00
$cx;
LOCK_NIGHT_FPS=05 02 00 08 #VR_NIGHT_MODE_FR #CMD_END
06 02 00 01 #VR_NIGHT_MODE_FR 03 #CMD_END
06 02 00 01 81 34 #CMD_END
#WAIT_FOR_MODE_TRANSITION;
LOCK_NORMAL_FPS=05 02 00 08 #VR_NORMAL_MODE_FR #CMD_END
06 02 00 01 #VR_NORMAL_MODE_FR 03 #CMD_END
06 02 00 01 81 34 #CMD_END
#WAIT_FOR_MODE_TRANSITION;
RELEASE_LOCK_FPS=$u07;
VF_TRANSITION_DELAY=$d00c8;
seq_ss_config_1=05 02 00 19 0D #CMD_END $u05;
seq_ss_config_2=05 02 00 19 0B #CMD_END $u05;
seq_ss_config_3=05 02 00 19 06 #CMD_END $u05;
seq_ss_config_4=05 02 00 19 04 #CMD_END $u05;
seq_ss_config_5=05 02 00 19 03 #CMD_END $u05;
seq_ss_config_6=05 02 00 19 02 #CMD_END $u05;
seq_ss_config_7=05 02 00 19 01 #CMD_END $u05;
seq_ss_config_8=05 02 00 19 00 #CMD_END $u05;
seq_ss_config_9=05 02 00 19 04;
seq_vf_config_11=#VF_TRANSITION_DELAY 05 02 00 07 09 #CMD_END #RELEASE_LOCK_FPS;
seq_vf_config_12=#VF_TRANSITION_DELAY 05 02 00 07 07 #CMD_END #RELEASE_LOCK_FPS;
seq_vf_config_13=#VF_TRANSITION_DELAY 05 02 00 07 05 #CMD_END #RELEASE_LOCK_FPS;
seq_vf_config_14=#VF_TRANSITION_DELAY 05 02 00 07 04 #CMD_END #RELEASE_LOCK_FPS;
seq_vf_config_15=#VF_TRANSITION_DELAY 05 02 00 07 03 #CMD_END #RELEASE_LOCK_FPS;
seq_vf_config_21=06 02 00 01 28 03 #CMD_END #VF_TRANSITION_DELAY 05 02 00 07 08 #CMD_END #LOCK_NORMAL_FPS;
seq_vf_config_22=06 02 00 01 28 03 #CMD_END #VF_TRANSITION_DELAY 05 02 00 07 08 #CMD_END #LOCK_NIGHT_FPS;
seq_vf_config_23=06 02 00 01 28 03 #CMD_END #VF_TRANSITION_DELAY 05 02 00 07 06 #CMD_END #LOCK_NORMAL_FPS;
seq_vf_config_24=06 02 00 01 28 03 #CMD_END #VF_TRANSITION_DELAY 05 02 00 07 06 #CMD_END #LOCK_NIGHT_FPS;
seq_ss_config_30= 06 02 00 01 3C 03 $f
05 02 00 07 06 $f
06 02 00 01 01 34 $f $d0200
03 55 AA $f
07 04 2E 11 04 00 FF $f
08 04 04 58 00 05 98 07 $f
08 04 00 80 00 05 30 00 $f
08 04 12 80 00 05 AA 55 $f
08 04 14 80 00 05 9C 00 $f
08 04 16 80 00 05 9C 00 $f
$se 30 $d0100;
EMPTY_EVENT_FIFO=05 01 00 03 03 $f $r4 4 4 4 5
$c5 00 $cl
$d0005 05 01 00 03 03 $f $r4 4 4 4 5
$c5 00 $cl
$d0005 05 01 00 03 03 $f $r4 4 4 4 5
$c5 00 $cl
$d0005 05 01 00 03 03 $f $r4 4 4 4 5
$c5 00 $cl
$d0005 05 01 00 03 03 $f $r4 4 4 4 5
$c5 00 $cl
$d0005 05 01 00 03 03 $f $r4 4 4 4 5
$c5 00 $cl
$d0005 05 01 00 03 03 $f $r4 4 4 4 5
$c5 00 $cl
$d0005 05 01 00 03 03 $f $r4 4 4 4 5
$c5 00 $cl
$d0005 05 01 00 03 03 $f $r4 4 4 4 5
$c5 00 $cl
$d0005 05 01 00 03 03 $f $r4 4 4 4 5
$c5 00 $cl
$d0005 05 01 00 03 03 $f $r4 4 4 4 5
$c5 00 $cl
$d0005 05 01 00 03 03 $f $r4 4 4 4 5
$c5 00 $cl
$d0005 05 01 00 03 03 $f $r4 4 4 4 5
$c5 00 $cl
$d0005 05 01 00 03 03 $f $r4 4 4 4 5 $cx $cx $cx $cx $cx $cx
$cx $cx $cx $cx $cx $cx $cx;
seq_vf_start=$ze;
seq_vf_stop=;
seq_ss_start= $s7 00;
seq_ss_take= $c7 00
$s7 01
#EMPTY_EVENT_FIFO $z0 $-0 re
$c0 00
$cl $p0 0d
$c0 01
$p0 01
$c0 00 #LED_WB_SET
$cx
$cx
#SM_ENHANCE_SHUTTER_MODE
06 02 00 01 01 $ze $ce 09 33 $cl 32 $cx $f
#WAIT_FOR_MODE_TRANSITION
#WAIT_FOR_CAPT_START
$cx
$t0020
$z0 $c0 09 $cl #SM_ENHANCE_NIGHT_MODE $cx
$cx;
READ_Q_VALUE = 05 01 00 1B 01 $f $r2 4 9
$c4 02 $cl
05 01 00 1B 01 $f $r2 4 9
$c4 02 $cl
05 01 00 1B 01 $f $r2 4 9
$c4 02 $cl
05 01 00 1B 01 $f $r2 4 9
$c4 02 $cl
05 01 00 1B 01 $f $r2 4 9
$cx
$cx
$cx
$cx;
READ_FLASH_EXIF =05 01 00 2B 01 $f $r2 8 8;
seq_ss_verify=$ce 09
$s0 01
$cl
$ce 30
$s0 01
$cl
#READ_JPEG_STATUS
$c4 00
$s0 01
#READ_Q_VALUE
$cl
$s0 00
$cx
$cx
$cx #READ_FLASH_EXIF;
seq_ss_stop=06 02 00 01 00 72 #CMD_END
#LED_WB_UNSET
06 02 00 01 00 01 #CMD_END
06 02 00 01 00 04 #CMD_END
#SM_RESTORE_ENHANCE_NIGHT;
jpeg_qtable_selector_0=$s2 00 05 01 00 1B 01 $f $r2 1 0;
jpeg_qtable_selector_1=$s2 01 05 01 00 1B 01 $f $r2 1 0;
jpeg_qtable_0=10 0B 0C 0E 0C 0A 10 0E
0D 0E 12 11 10 13 18 28
1A 18 16 16 18 31 23 25
1D 28 3A 33 3D 3C 39 33
38 37 40 48 5C 4E 40 44
57 45 37 38 50 6D 51 57
5F 62 67 68 67 3E 4D 71
79 70 64 78 5C 65 67 63;
jpeg_qtable_1=11 12 12 18 15 18 2F 1A
1A 2F 63 42 38 42 63 63
63 63 63 63 63 63 63 63
63 63 63 63 63 63 63 63
63 63 63 63 63 63 63 63
63 63 63 63 63 63 63 63
63 63 63 63 63 63 63 63
63 63 63 63 63 63 63 63;
jpeg_qtable_factors=0,320000,190000,10AA00,C8000,A0000,85500,72400,64000,58E00,50000
,48B00,42A00,3D800,39200,35500,32000,2F000,2C700,2A100,28000
,26100,24500,22C00,21500,20000,1EC00,1DA00,1C900,1B900,1AA00
,19C00,19000,18300,17800,16D00,16300,15900,15000,14800,14000
,13800,13000,12900,12200,11C00,11600,11000,10A00,10500,10000
,FA00,F500,F000,EB00,E600,E100,DC00,D700,D100,CC00
,C700,C200,BD00,B800,B300,AE00,A800,A300,9E00,9900
,9400,8F00,8A00,8500,8000,7A00,7500,7000,6B00,6600
,6100,5C00,5700,5100,4C00,4700,4200,3D00,3800,3300
,2E00,2800,2300,1E00,1900,1400,F00,A00,500,0;
jpeg_header= FF D8
FF E0 00 10 4A 46 49 46 00 01 01 00 00 01 00 01 00 00
FF DB 00 84 00 $qt0 01 $qt1
FF C4 01 A2 00 00 01 05 01 01 01 01 01 01 00 00 00 00 00 00 00
00 01 02 03 04 05 06 07 08 09 0A 0B
01 00 03 01 01 01 01 01 01 01 01 01 00 00 00 00 00
00 01 02 03 04 05 06 07 08 09 0A 0B
10 00 02 01 03 03 02 04 03 05 05 04 04 00 00 01 7D
01 02 03 00 04 11 05 12 21 31 41 06 13 51 61 07
22 71 14 32 81 91 a1 08 23 42 b1 c1 15 52 d1 f0
24 33 62 72 82 09 0a 16 17 18 19 1a 25 26 27 28
29 2a 34 35 36 37 38 39 3a 43 44 45 46 47 48 49
4a 53 54 55 56 57 58 59 5a 63 64 65 66 67 68 69
6a 73 74 75 76 77 78 79 7a 83 84 85 86 87 88 89
8a 92 93 94 95 96 97 98 99 9a a2 a3 a4 a5 a6 a7
a8 a9 aa b2 b3 b4 b5 b6 b7 b8 b9 ba c2 c3 c4 c5
c6 c7 c8 c9 ca d2 d3 d4 d5 d6 d7 d8 d9 da e1 e2
e3 e4 e5 e6 e7 e8 e9 ea f1 f2 f3 f4 f5 f6 f7 f8
f9 fa
11 00 02 01 02 04 04 03 04 07 05 04 04 00 01 02 77
00 01 02 03 11 04 05 21 31 06 12 41 51 07 61 71
13 22 32 81 08 14 42 91 a1 b1 c1 09 23 33 52 f0
15 62 72 d1 0a 16 24 34 e1 25 f1 17 18 19 1a 26
27 28 29 2a 35 36 37 38 39 3a 43 44 45 46 47 48
49 4a 53 54 55 56 57 58 59 5a 63 64 65 66 67 68
69 6a 73 74 75 76 77 78 79 7a 82 83 84 85 86 87
88 89 8a 92 93 94 95 96 97 98 99 9a a2 a3 a4 a5
a6 a7 a8 a9 aa b2 b3 b4 b5 b6 b7 b8 b9 ba c2 c3
c4 c5 c6 c7 c8 c9 ca d2 d3 d4 d5 d6 d7 d8 d9 da
e2 e3 e4 e5 e6 e7 e8 e9 ea f2 f3 f4 f5 f6 f7 f8
f9 fa
FF C0 00 11 08 $h $w 03 01 21 00 02 11 01 03 11 01
FF DA 00 0C 03 01 00 02 11 03 11 00 3F 00;
// end driver
[ This Message was edited by: paparazy on 2007-03-28 14:00 ]
[ This Message was edited by: paparazy on 2007-03-28 17:52 ]
Posted by mikeypants
Can anyone help me and tell me how to load these wonderful drivers?
Posted by pram_zx
Manual Shutter speed changed:
adjust EV plus daylight and night to change value.
can anyone teach me about how to use it?
Posted by pram_zx
Hey Kriomag...!
Why don't you make some small change's on v8.54 with ONLY changing the v8.54 ENM with w900 ENM ??? it would be superb!!!(although it will be take more time to take picture...
)
Posted by aabg
i think autofocus option has lost in other scenes, i cant make it to focus... it has to be always with macro on and night on so it can do it
[ This Message was edited by: aabg on 2007-03-28 06:18 ]
Posted by Kriomag
On 2007-03-28 01:04:05, paparazy wrote:
// start driver tunned v8.54 for k750 cid36 r1ca021
[............]
// end driver
[ This Message was edited by: paparazy on 2007-03-28 00:29 ]
What a mess... plz, dont paste entire driver to the forum!
Posted by stingjoel
@aabg;
If you turn on macro and night mode (manual focus setting) then you change zoom value other than 1.0 (eg. 1.4), your setting will be saved...when you open the camera again, the setting is still 1.4, not 1.0.
[ This Message was edited by: stingjoel on 2007-03-28 08:11 ]
Posted by cosminfs
I have the same problem. I always have to set 1.0 for autofocus, that's why i think autofocus should be the default setting.
Posted by Badshah
On 2007-03-28 08:45:02, Kriomag wrote:
On 2007-03-28 01:04:05, paparazy wrote:
// start driver tunned v8.54 for k750 cid36 r1ca021
[............]
// end driver
[ This Message was edited by: paparazy on 2007-03-28 00:29 ]
What a mess... plz, dont paste entire driver to the forum!
that is not the first time... he always does the same .... he needs to see some doc
Posted by Holdit
Add colour correction and i think there should be more than enough to play with
Posted by tranced
@papa: why you posted the whole camdriver? you could have posted a link with it. remember there are ppl browsing throu wap.
Posted by BOSSHOGG
| Quote: |
|
yep, tried the 49s too, all the same. Never had a problem with camdrivers before. I'll try the next update though.
Posted by kopritis
mine's cid49 R1DB001 it works perfect!!! and i don't have make changes at my firmware.
Great job! thank's all
[ This Message was edited by: kopritis on 2007-03-28 13:00 ]
Posted by norbi_nw
whaaaaa.... a whole camdriver in forum... -.-
It's a suggestion for chengrong.. If you could make a profile, where the autofocus is disabled
(it would be great for fast photos)
Woops.. macro+NM+1.1zoom is autofocus disabled
thx chengrong
I'm using R1BC002 @ cid36 ... weird thing is that i can't use ENM :/
[ This Message was edited by: norbi_nw on 2007-03-28 13:32 ]
How do i activate ENM? macro+nightmode or simply nightmode?
[ This Message was edited by: norbi_nw on 2007-03-28 13:43 ]
Posted by betalin
On 2007-03-28 08:54:10, stingjoel wrote:
@aabg;
If you turn on macro and night mode (manual focus setting) then you change zoom value other than 1.0 (eg. 1.4), your setting will be saved...when you open the camera again, the setting is still 1.4, not 1.0.
when ever i enter the camera the focus is 1.1(manual focus setting1.1), can never changed .
Posted by tranced
On 2007-03-28 14:19:46, norbi_nw wrote:
How do i activate ENM? macro+nightmode or simply nightmode?
Posted by norbi_nw
nope... i think simple nightmode is just simple nightmode
scene 1.8+NM is enhanced NM
Posted by norbi_nw
aaaah.. so many functions. We can't learn em. Everyone who uploads a new driver, should discuss all functios
Updates come so often and fast =))
Posted by tranced
On 2007-03-28 15:17:47, norbi_nw wrote:
nope... i think simple nightmode is just simple nightmode
scene 1.8+NM is enhanced NM
Normal Zoom: Macro on,night on,Press zoom key to change
EnhanceNight Shot: Just only turn night on, this is automatic work.
look for it in the very first post of this thread.
Posted by elevation1
so it's a bug of cid49... more noise in the night mode than 8.53 or what is it? thanks a lot anyway
Posted by leon12
On 2007-03-28 15:17:47, norbi_nw wrote:
nope... i think simple nightmode is just simple nightmode
scene 1.8+NM is enhanced NM
no, ChengRong wrote whats new and how to use it, so i think that the ENM should be enabled like in previous version, 8.53.
but thats not working on my phone, and im not only..
in previous driver, e.g. i was using 1.4 scene with enm. so, how do i do that when the enm is 1.8 +NM as you say?
dont now, maybe im wrong, maybe is 1.8 + nm = ENM..
im waiting to ChengRong explain us..
Posted by norbi_nw
but have you tryed 1.8+NM? It looks like ENM... have to wait 7sec to make picture
Posted by Holdit
Are you people blind? cant u tell what enm looks like when u have taken the picture - lol
[ This Message was edited by: Holdit on 2007-03-28 15:28 ]
Posted by P_Cherry
Hi,
I am new to Super Camera Driver. What is the latest version, where to download and how to control it ?
I saw some great pictures...with 7.7 ENM (what is it ?)
and also 1.8 profile with minimum EV ???
Is there any guide?
Thanx for help (I was reading this forum but nowhere any summary:(