Super camera driver for k750/w800/w810

Posted by Badshah

On 2007-03-23 00:25:35, Kriomag wrote:

On 2007-03-22 07:58:00, pram_zx wrote:
@Kriomag
can you add AE Lock and night scene(sorry..not nightmode like my last wrote, but night scene, on v8.53 scene 1.4, on mladen750 v8.8 scene 1.5 )
THANX B4... I will try this...

7.7 Final - Mod based on 8.53

- Enhanced Night Mode (Night Mode + Macro)
- VR FPS Increased
- SPOT Support (Normal Mode = SPOT ON, FINE Mode = SPOT OFF, JPEG quality permanently set to FINE)
- Smooth Linear Zoom x16
- Profiles (only when macro ON)
- AE Lock

i haven't tested it yet cause its midnight... :/ here is link, test if its working correctly:

http://www.rogepost.com/n/8215160477

i took the pics in day light and came out great sharp and very clear .... but it was in default ... i dont know how to take out nmaximum benefit more from it

can u explain how to use SPOT

how to use profiles when macro is on

how to use AE lock and what is the benefit/effect of it

regards.

Posted by dennis.l

On 2007-03-23 12:17:58, Kriomag wrote:

vkp patch would be great for SPOT selection i used in my latest driver (picture quality normal = spot on, fine = spot off )

I will give it a go. finding text in the FW and changing it should not be too hard. I am going to try it on my W800i APAC FW. Will let you know how I go later on.

Which driver would this be for?

Posted by ukaszek

just give me the link and i'll try to make it

Here is the link

http://download.yousendit.com/738C2DCA79F10F21

Posted by norbi_nw
i'm using this latest driver (based on 7.7 with new ENM but no AE lock), and sometimes (mostly all the times) when i wanna take a picture of the building next door, with ENM (macro+NM), it takes the picture, but before it says "saving", it jumps out to the standby screne. I noticed that it does this when the scene is bright (the building is grey) but enough dark to activate the enhanced night shot mode (If i take the picture with -2.0 ev, it works).
Is this happening because the JPEG compression is too high?

Posted by Kriomag

On 2007-03-24 18:14:11, ukaszek wrote:

just give me the link and i'll try to make it

Here is the link

http://download.yousendit.com/738C2DCA79F10F21

http://www.rogepost.com/n/8764547786 <-- ZUZA 2007 + ENM (nightmode + macro)

Posted by Kriomag

On 2007-03-24 19:27:46, norbi_nw wrote:
i'm using this latest driver (based on 7.7 with new ENM but no AE lock), and sometimes (mostly all the times) when i wanna take a picture of the building next door, with ENM (macro+NM), it takes the picture, but before it says "saving", it jumps out to the standby screne. I noticed that it does this when the scene is bright (the building is grey) but enough dark to activate the enhanced night shot mode (If i take the picture with -2.0 ev, it works).
Is this happening because the JPEG compression is too high?

i have no idea :/
i have the same problem when i want to take shot with ENM of my bed :/ (blanket with complicated pattern), it happens even on chengrongs 8.53 :/

Posted by Kriomag
7.7 Final - Kriomag Mod

- Enhanced Night Mode (Night Mode + Macro)
- 3 VR Modes (normalmode=14fps, nightmode=10fps, enhancenightmode=5fps)
- SPOT Support (Normal Mode = SPOT ON, FINE Mode = SPOT OFF, JPEG quality permanently set to FINE)
- Smooth Linear Zoom x16 (from v8.53)

--> http://www.rogepost.com/n/5152129335 <--

3 sec video samples demonstrating difference between 3 VR modes:
http://www.rogepost.com/n/8608595610

PS. Here you can download version with Color Correction (from v15.0) -> http://www.rogepost.com/n/4995814487 <- I have not tested it outside yet cause its night so i dont know how color correction works in daylight feel free to test it

7.7 Final:

7.7 Final + Color Correction:

I just came back from bike

7.7 + Color Correction is great when taking pictures in sun-light

7.7 Final:

7.7 Final + Color Correction:

Here is another version (for testing purposes):
- Macro OFF = Color Correction ON
- Macro ON = Default Colors
With this driver you can take shot with and without CC to see the difference (like i did with temple picture):D
http://www.rogepost.com/n/3909068611

[ This Message was edited by: Kriomag on 2007-03-26 09:00 ]

Posted by ukaszek

http://www.rogepost.com/n/8764547786 <-- ZUZA 2007 + ENM (nightmode + macro)

thx Kriomag !!!

Posted by kopritis
Hi! i'm new in the forum!!!
I have a question, what is macro and how to enable the macro on k750i ?
My phone is k750i cid49 R1DB001

[ This Message was edited by: kopritis on 2007-03-25 04:29 ]

Posted by Kriomag

can u explain how to use SPOT

how to use profiles when macro is on

how to use AE lock and what is the benefit/effect of it

regards.

SPOT: page 53
Profiles: page 1 (when macro on select profiles +/-)
AE Lock: page 1 or use google (second link)

Posted by leon12
kriomag,
your new 7.7f drivers, did you add the profiles when macro is on?
if not, can you?

Posted by K750i_sam_23
hello all....
nice discussion.....
i juss am facing a few probs......
im using a SEK750i, CID 49, n am on R1Db001.....

i used almost all drivers, supercam8.53, Zuza 3, almost all..... but the prob is the zoom in the largest pic mode does not work....
it does zoom in, but the pic is saved as a normal pic.....

also, i wanted to know if it is possible to use a tweaked driver of a K550i (the new 2MP cybershot) on my K750i.... or atleast tht of the W810i (v4.5)

ppl who can tweak drivers, can u plz put them up on 4shared or any other free upload/download site????

Posted by wayne_rooney
Here you can download version with Color Correction (from v15.0) -> http://www.rogepost.com/n/4995814487 <- I have not tested it outside yet cause its night so i dont know how color correction works in daylight feel free to test it

hi ,

but which u give in u r edit post is it different than this one.......

Posted by Kriomag
in second link (at the end of post) you can disable CC by enabling macro

in previous CC was always on (not in the ENM? :/)

Posted by Badshah
thanks... new driver with CC looks good

btw where u from? what was that temple / church something?

Posted by Badshah

On 2007-03-25 19:20:38, Kriomag wrote:
in second link (at the end of post) you can disable CC by enabling macro

in previous CC was always on (not in the ENM? :/)

but sad ... profiles are no more avalable when macro is ON?

and how abt AE loc? :-S

[ This Message was edited by: Badshah on 2007-03-25 19:26 ]

Posted by Kriomag

On 2007-03-25 20:14:05, Badshah wrote:
thanks... new driver with CC looks good

btw where u from? what was that temple / church something?

I live here:
http://tinyurl.com/2xat2p

The Temple is here (~1km from my house):
http://tinyurl.com/23r7fe

[ This Message was edited by: Kriomag on 2007-03-25 19:41 ]

Posted by Kriomag

On 2007-03-25 20:24:21, Badshah wrote:

On 2007-03-25 19:20:38, Kriomag wrote:
in second link (at the end of post) you can disable CC by enabling macro

in previous CC was always on (not in the ENM? :/)

but sad ... profiles are no more avalable when macro is ON?

and how abt AE loc? :-S

[ This Message was edited by: Badshah on 2007-03-25 19:26 ]

AE is onboard

but if you want profiles version... it can be done

which driver you want me to modify with CC? (it would be much faster if you could give me the link

)

[ This Message was edited by: Kriomag on 2007-03-25 19:52 ]

Posted by Badshah
in the recent version ... 7.7 final with CC on

i heard ZUZA 2007 is also good ... so make same settings u done with 7.7 to ZUZA 2007

i mean ZUZA 2007 with 16x zoom, SPOT, ENM, AE & CC ... everthing else if i missed out any

Posted by Badshah
the link

http://www.rogepost.com/n/4995814487

VR is also needed

Posted by guguly

On 2007-03-25 05:27:34, kopritis wrote:
Hi! i'm new in the forum!!!
I have a question, what is macro and how to enable the macro on k750i ?
My phone is k750i cid49 R1DB001

It's in your phone manual...=)

Posted by mikeypants
Can someone please help me figure out how to install this on my K750i?
I am not exactly sure which file is the best to download, and once I do that, how do I install it?

Here is the "software info" from my phone:

"R1DB001
prgCXC125952_EU_1_CL
R1DB001

LCD SW versions
Main display
Current: 0

Camera SW versions
Camera
Current: 5/3

ITP SW version
CXC 125 932 R1J

Customization
CDA102337/103 R3A
cxc125953 R1DB001
EMEA_6

Content Version
PA19"

My phone was made in the 10th week of 2006, so I think it is CID49, but I have no way of knowing for sure... Any help?
Any help greatly appreciated.

[ This Message was edited by: mikeypants on 2007-03-26 02:00 ]

Posted by Kriomag

On 2007-03-25 21:10:36, Badshah wrote:
i heard ZUZA 2007 is also good ... so make same settings u done with 7.7 to ZUZA 2007

i mean ZUZA 2007 with 16x zoom, SPOT, ENM, AE & CC ... everthing else if i missed out any

ZUZA 2007 - Kriomag Mod based on 8.53, 15.0

- Enhanced Night Mode (Night Mode + Macro)
- 3 VR Modes (normalmode=14fps, nightmode=10fps, enhancednightmode=5fps)
- SPOT Support (Normal Mode = SPOT ON, FINE Mode = SPOT OFF, JPEG quality permanently set to FINE)
- Smooth Linear Zoom x16
- AE Lock
- Color Correction

http://www.rogepost.com/n/0190599839

[ This Message was edited by: Kriomag on 2007-03-26 11:33 ]

Posted by hobo.
do the drive have the same function as the original drive on w810.
i.e. 1=picture size, 4=marco, 7= night mode, *= flash

[ This Message was edited by: hobo. on 2007-03-26 07:59 ]

Posted by Kriomag

On 2007-03-26 08:58:51, hobo. wrote:
do the drive have the same function as the original drive on w810.
i.e. 1=picture size, 4=marco, 7= night mode, *= flash

[ This Message was edited by: hobo. on 2007-03-26 07:59 ]

yes, it has the same function.

Posted by leon12
Kriomag
can you add profiles (when macro on) on you new version 7.7f with 3 VR Modes?
and, is it possible to put cc as profile, e.g. when macro on scene 1.1 is with cc?

Posted by Kriomag

On 2007-03-25 21:10:36, Badshah wrote:
in the recent version ... 7.7 final with CC on

7.7 Final - Kriomag Mod based on 8.53, 15.0

- Enhanced Night Mode (Night Mode + Macro)
- 3 VR Modes (normalmode=14fps, nightmode=10fps, enhancednightmode=5fps)
- SPOT Support (Normal Mode = SPOT ON, FINE Mode = SPOT OFF, JPEG quality permanently set to FINE)
- Smooth Linear Zoom x16
- Profiles (only when macro ON)
- AE Lock
- Color Correction

http://www.rogepost.com/n/9162474430

Posted by Badshah

On 2007-03-26 11:20:06, leon12 wrote:
Kriomag
can you add profiles (when macro on) on you new version 7.7f with 3 VR Modes?
and, is it possible to put cc as profile, e.g. when macro on scene 1.1 is with cc?

that is what i asked for too ... he gave me ZUZA 2007 but again ... there are no profiles ....

with all respect .. thanks for ur hardwork kriamog...

Posted by Kriomag

CC as profile... im working on it (but i dont know if i can do it

maybe chengrong...

)

Posted by Badshah

On 2007-03-26 11:51:12, Kriomag wrote:

On 2007-03-25 21:10:36, Badshah wrote:
in the recent version ... 7.7 final with CC on

oh my !! lol ...

thanks a lot

Posted by Kriomag

On 2007-03-26 11:51:43, Badshah wrote:
that is what i asked for too ... he gave me ZUZA 2007 but again ... there are no profiles ....

with all respect .. thanks for ur hardwork kriomag...

thats because i dont like profiles

lol

ZUZA 2007 - Kriomag Mod based on 8.53 and 15.0

- Enhanced Night Mode (Night Mode + Macro)
- 3 VR Modes (normalmode=14fps, nightmode=10fps, enhancednightmode=5fps)
- SPOT Support (Normal Mode = SPOT ON, FINE Mode = SPOT OFF, JPEG quality permanently set to FINE)
- Smooth Linear Zoom x16
- Profiles (only when macro ON)
- AE Lock
- Color Correction

http://www.rogepost.com/n/8037972260

[ This Message was edited by: Kriomag on 2007-03-26 11:29 ]

Posted by dennis.l

On 2007-03-26 08:56:53, Kriomag wrote:

http://www.rogepost.com/n/6797926803 <- ZUZA 2007 (16x, SPOT, ENM, AE Lock, 3 VR Modes & CC - no profiles)

@kriomag
sorry about the questions.. You have so many versions of drivers I lost track of which driver does what.

I must have missed something in the last 3 pages. How do you select which VR modes? is it automatically changed when you select night mode and enchance night mode etc.

is night mod on and macro off = std night mode on this driver
is night mode on and macro on = New Enchance night mode? or is is still night mode on, macro on and light on?

Posted by stingjoel
@Kriomag;

What's Color Correction used for?

Posted by Kriomag

On 2007-03-26 12:30:57, stingjoel wrote:
@Kriomag;

What's Color Correction used for?

See page 61

Posted by Kriomag

On 2007-03-26 12:25:01, dennis.l wrote:
@kriomag
sorry about the questions.. You have so many versions of drivers I lost track of which driver does what.

I must have missed something in the last 3 pages. How do you select which VR modes? is it automatically changed when you select night mode and enchance night mode etc.

is night mod on and macro off = std night mode on this driver
is night mode on and macro on = New Enchance night mode? or is is still night mode on, macro on and light on?

3 VR Modes:
- Normal mode = Normal Mode VR (14fps)
- Night mode = Night Mode VR (10fps)
- Night mode + Macro = Enhance Night Mode VR (5fps)

[ This Message was edited by: Kriomag on 2007-03-26 12:03 ]

Posted by whatsucka
wat do SPOT mode do??

Posted by hellvy
Hi Kriomag. I've tried your 7.7 camera driver, very impressive

spot metering mode

normal mode with +1.0 ev

I just thought that spot metering mode will increase only brightness of the center object.
But my test image says that overall brightness of the picture is increased.
If it's true, why do we need spot metering mode while we can achieve the same result faster with plus ev in normal mode ?

[ This Message was edited by: hellvy on 2007-03-26 16:06 ]

Posted by vakzer
Hi!
I have 2 question:
can I use the super mode in the 7.7 version, or only in the 8.53? And which is the the latest cam driver for k750/ w800? Sorry for my english, I'm a hungarian:P

Posted by leon12
tnx kriomag for driver with profiles.

in your opinion, is the 7.7f driver (or any other) better with cc or not, is the color more real?
how 8.53 works with cc, did you test it?
i still hope that cc is able to put as profile ( or that cc is def, and normal is in profile)

and others, what do you think about cc?

on sunny day, cc gives nice pictures, but in some cases like indoors, normal is much better, colors are nicer.. (talking about 7.7)

Posted by Kriomag

On 2007-03-26 19:30:45, leon12 wrote:
tnx kriomag for driver with profiles.

and others, what do you think about cc?

on sunny day, cc gives nice pictures, but in some cases like indoors, normal is much better, colors are nicer.. (talking about 7.7)

yep... CC isnt perfect

its good only in some situations... for me: default (too much greenes/yellowness?

), CC (too much red

- but im working to fix this

).
Im trying to make CC as profile but its not as easy as inserting ENM to other drivers... i dont know if i can do it

[ This Message was edited by: Kriomag on 2007-03-26 20:38 ]

Posted by Kriomag

On 2007-03-26 17:03:30, hellvy wrote:
Hi Kriomag. I've tried your 7.7 camera driver, very impressive

I have some question about spot metering mode..
I tried taking a picture with spot metering mode and normal metering mode with ev increase.
I hardly see the difference result between these 2 type of shooting. Here's my test images..

normal mode
[img]...[/img]

spot metering mode
[img]...[/img]

normal mode with +1.0 ev
[img]...[/img]

I just thought that spot metering mode will increase only brightness of the center object.
But my test image says that overall brightness of the picture is increased.
If it's true, why do we need spot metering mode while we can achieve the same result faster with plus ev in normal mode ?

[ This Message was edited by: hellvy on 2007-03-26 16:06 ]

hehe, because thats how spot works

it measure amount of light in the picture and set it to be best for central object

other objects are not important so can bo overexposured

(yes, its the same thing as EV + but done automaticaly). I noticed SPOT is very good for Macros (flowers etc )

Posted by chengrong
The Super camera driver 8.54 released.

See first post

Posted by Badshah

On 2007-03-27 10:50:12, chengrong wrote:
The Super camera driver 8.54 released.

See first post

thx chengrong.. was waiting for this

btw how to activate ENM? Macro + Night mode / or some other way?

Posted by Kriomag

On 2007-03-27 10:50:12, chengrong wrote:
The Super camera driver 8.54 released.

See first post

THANK YOU!

Manual Focus is so COOL

and LED support in EnhanceNightMode

(i tried to modify 8.53 to support LED in ENM, it worked but sometimes camera was turning off :/ )

[ This Message was edited by: Kriomag on 2007-03-27 10:53 ]

Posted by stingjoel

On 2007-03-27 10:50:12, chengrong wrote:
The Super camera driver 8.54 released.

See first post

Thank you Chengrong...downloading and try it

Posted by Badshah
Manual Shutter speed changed, adjust EV and daylight and night to change value.

i am not getting this part .. can u explain?

Posted by stingjoel
@Chengrong;

I found this comment in your camdriver v.8.54:
//Mar 27,2007 add two scence green grass and cold
You have 2 new scenes?

//********************************************************************
// 0 => Sports 1 => Normal 2 => Landscape
// 3 => Portrait 4 => Nightscene 5 => Nightportrait
// 6 => Beach/snow 7 => Document 8 => Manual Exposure
//--------------------------------------------------------------------

Are the scenes position change?

Posted by Froggies
Just first time using this driver,how to enter supercam mode or it's already enable by default?Thanks in advance.

Posted by guguly

On 2007-03-27 12:23:50, Froggies wrote:
Just first time using this driver,how to enter supercam mode or it's already enable by default?Thanks in advance.

8.53 and 8.54 - enabled by default

Posted by wayne_rooney
hey.... chegrong...

in u r zip file.... there is cid 36 and 49 versions with firmware.....

can i use cid36 r1ca021 cam driver with r1bc002... its same for all cid36 right....???????/

just a query?