Posted by strong
@Raiderski
thanks alot again I will fix that
@DangeloGH
@sryche
try beta4
Posted by Sombra
Strong, after more tests, i conclude which SuperFunction v6 no is good for CID49 phones. Tomorrow i make some tests with new BETA camdriver.
Thanks for your work and sorry for my poor english.
Posted by pofi
@strong
I'm looking at your 5.8 all day long and found out it's only on 6 where you put CC.. I'm so stupid.. ehehe.. will post feedback again..
@Raiderski
Your driver is a bit slow for me. That's why if I take pictures, especially on low light conditions, it's out of focus.
Since your the guruiest of guru here, could you suggest any readings about driver modding. Thanks..
[ This Message was edited by: pofi on 2008-03-29 04:10 ]
Posted by leetiran
@ strong Sombra
cameradriver has nothing to do with cid. we say cid just because most cid49 k750 use a different cam module. in fact, it just depand on cam module not cid.
@ pofi
u can try raider672 modded by me(ultra superdrive6.7). not too long exposure.
Posted by strong
On 2008-03-29 06:15:40, leetiran wrote:
@ strong Sombra
cameradriver has nothing to do with cid. we say cid just because most cid49 k750 use a different cam module. in fact, it just depand on cam module not cid.
@ pofi
u can try raider672 modded by me(ultra superdrive6.7). not too long exposure.
Yes I know that but how to separate them? from cid of course!
Posted by (zalman)
In BETA4 my fon is restarting..
I juse w810i version. not k750i/w800i
Posted by strong
On 2008-03-29 11:29:43, (zalman) wrote:
In BETA4 my fon is restarting..
I juse w810i version. not k750i/w800i
lets guess restarts when try focusing right?
I foud this bug at beta 4
I uploading beta5
Posted by (zalman)
yea.. ok. i test this beta
Posted by (zalman)
@strong
I was apply CONTRAST to 1 and SATURATION to 3 in w810i version (6.1 B5) and driver is great
Later i was put photos
Posted by strong
SATURATION adjusting works only at cid 36 phones
_________________
k750@w800 R1BC002 http://www.4shared.com/dir/6197354/5c0a18d1/sharing.html
www.camdrivers.wz.cz/
[ This Message was edited by: strong on 2008-03-29 14:25 ]
Posted by MiHaU
Afterall I decided to back to Kriomags latest beta for k750/w800. I think it's the best driver so far, for my phone ofc. Sharpnes and colours are great. And no noise.
Posted by x.man
Strong, i like your drivers,but can you put autofocus from Sarmad's drivers in v6.0.
Posted by gabrielrm
@ strong
I have a k750 CID49 R1CA021 and adjusting saturation works.
@ all
I try to choose between strong's SuperFunction v6.1 BETA3 and leetiran's Ultra Superdriver 6.7, but i can't do that.
strong: auto, normal, macro
leetiran: auto, normal, macro
strong: auto, normal
leetiran: auto, normal
leetiran - sharp, but the white is a little bit too shine;
strong - natural, but not that sharp.
Could be colour corection involved in those differences?
Both drivers are super and thanks goes to all involved.
2 more photos and i'm confused..
strong: auto, fine (SuperFunction v6.1 BETA5)
leetiran: auto, fine
both drivers use sharpness=05.
Right now is 2 out of 3 for leetiran. Is more sharp and not so yellow.
[ This Message was edited by: gabrielrm on 2008-03-29 20:30 ]
Posted by petkoxray
Taken with my new version
http://sebg.110mb.com/CamDriv[....]_petkox_ray_W800-K750-W810.zip
[ This Message was edited by: petkoxray on 2008-03-29 20:55 ]
Posted by lpachuong
Let's save the power today for our future
.......... 8:00pm 29/03/2008 UK
_________________
To be or not to be !!!
Please save our world. Save our world to save our lives and our generation.
There is no place as good as your house with your family. Home sweet home.
[ This Message was edited by: lpachuong on 2008-03-29 21:51 ]
Posted by Sombra
When promised, follow samples of Strong's SuperFunction v6.1 Beta5 on a K750i CID49 (R1BC002):
Now focus works fine and photos are sharpness.
Thanks for re-added focus preview zoom in non-macro mode.
Great work Strong, great work!
Sorry for my poor english.
_________________
K750i CID49 (R1BC002) - Strong's SuperFunction v6.0 camdriver
[ This Message was edited by: Sombra on 2008-03-30 05:01 ]
Posted by strong
@x.man
If I do that must I change all codes of driver and this is difficult for me
@Sombra
thanks friend
I uploaded the last beta6 for comparation with beta5 the results will show
me the final version for that compare carefully the colors and sharpness
thanks all users for testing .
_________________
k750@w800 R1BC002 http://www.4shared.com/dir/6197354/5c0a18d1/sharing.html
www.camdrivers.wz.cz/
[ This Message was edited by: strong on 2008-03-30 13:56 ]
Posted by Sombra
@Strong:
Is dificult make comparison of colors, both BETAs are very good in this aspect, but in macro mode, Beta5 version appear be ever a bit more sharp. Follow two samples using Custom WB in real size for comparison:
SuperFunction v6.1 Beta5
SuperFunction v6.1 Beta6
Beta5
Beta6
What change you make in camdriver code? (Beta5 to Beta6)
Sorry for my poor english.
_________________
K750i CID49 (R1BC002) - Strong's SuperFunction v6.1 camdriver
[ This Message was edited by: Sombra on 2008-03-30 14:06 ]
Posted by strong
"Why change you make in camdriver code? "
I cant understand what you mean?
Posted by Sombra
Sorry Strong, my english really no is good.
No problem, nothing important, only curiosity, but now i found the reply to question.
Posted by dekson
Hello guys as i can see, the pictures taken with CID49 Fones haven't same quality like CID36.
What i want to say, CID49 models take best picture.
Please camtesters, can you notify what are your phones ( W810, CID...) when you post your pictures for take a comparaison.
Thank you guys and keep the good work ^^
@DeXX
[ This Message was edited by: dekson on 2008-03-30 14:52 ]
Posted by razvan89
Two photos with Ultra Camera Leetiran edired by me
Posted by przemo83
I have a k750 CID49 R1CA021, I use SuperFunction v6.1 BETA6, some pictures:
for me this driver is the best...
Great work Strong
Sorry for my poor english...
[ This Message was edited by: przemo83 on 2008-03-30 18:24 ]
Posted by strong
wow! are you working at zoo?
nice animals that Lama is so beautiful
Posted by lpachuong
A4A-Final Release 30/03/2008
http://www.mediafire.com/?m9ljxd9ztxn
The same functions as the previous version.
Updated some values for w810i.
K750i/w800i can use the attached driver as well
Enjoy.
Posted by wickedsick
On 2008-03-10 10:18:27, strong wrote:
WTF. I only have 1 account. Got it.
strong, your drivers are not as sharp as lpachuong's drivers in full size. Check it out man. And I dont care how many account you have any more.
Posted by strong
are you serius? I have only one "strong"
Posted by przemo83
On 2008-03-30 20:18:59, strong wrote:
wow! are you working at zoo?
no, there was excursion for zoo in katowice (poland)
thanks one more time too super camdriver...
Posted by PakiThugg
On 2006-11-21 03:15:28, chengrong wrote:
Quote: | ||||||
| ||||||
Yes. only this changed will skip check press >*<<*<.
how do i get to those lines...so i can change them..i have a k750
Posted by petkoxray
Posted by tommymar
On 2008-03-30 20:23:22, lpachuong wrote:
A4A-Final Release 30/03/2008
http://www.mediafire.com/?m9ljxd9ztxn
The same functions as the previous version.
Updated some values for w810i.
K750i/w800i can use the attached driver as well
Enjoy.
Thank you for your new driver, I will try it on my k750. Will post result tomorow.
Posted by Sombra
On 2008-03-30 20:23:22, lpachuong wrote:
A4A-Final Release 30/03/2008
http://www.mediafire.com/?m9ljxd9ztxn
The same functions as the previous version.
A4A-Final Release 30/03/2008
http://www.mediafire.com/?m9ljxd9ztxn
The same functions as the previous version.
One question lpachuong: in my tests with this camdriver (previous Final Release), file sizes of photos is lower which others versions (280~300KB). This is normal?
Using others camdrivers JPEGSnoop result ever ~90% of compression factor, but with this "Final Release", this value is ever ~75%.
Posted by prabath_fun
Hi Guys,
Please briefy me what is this drivers? Whether it will enhance the camera? Or it is sort of Java application to capture the picture?
My phone is W810I with R4DB005. How I can identify the driver available in my Phone.
Regards,
Prabath
Posted by leetiran
On 2008-03-29 09:10:32, strong wrote:
On 2008-03-29 06:15:40, leetiran wrote:
@ strong Sombra
cameradriver has nothing to do with cid. we say cid just because most cid49 k750 use a different cam module. in fact, it just depand on cam module not cid.
Yes I know that but how to separate them? from cid of course!
the new cam module cannot zoom at max size. we can separate them from this. we can say no zoom at max size cid49 k50. if we just say cid49, may make confusion.
Posted by leetiran
http://www.mediafire.com/?2xlyjfnxqsz
Menu_Superdriver 6.7(Modded raider6.7.2, by leetiran)
for people who cannot remember all functions of EV.
Effects menu for supermode:
Off for Normal(supermode off): zoom(+/-) 1.0-4.0 = 1x-4x;
Other for Supermode:
B&W for SCENES(profile):
zoom(+/-) 1.0 = auto
1.1 = landscape(Twilight_landscape in night)
1.2 = portrait(Nightportrait in night)
1.3 = sports
1.4 = beach/snow
1.5 = sunny
1.6 = cloudy landscape
1.7 = document
Negative for Custom WB & Effects:
zoom(+/-) 1.0 = default WB
1.1 = WB lock
1.2 = one push
1.3 = Effects off
1.4-1.9 = Effects
Sepia for Manual Focus
zoom(+/-) 1.0 = auto
1.1 = infinity
1.2 - 4.0 = manual (press and free snapshot key to enable/disable zoom 4x)
Solarize for Manual ShutterSpeed
zoom(+/-) 1.0 = auto
1.1 - 4.0 = normal mode (1/6400s - 1/8s)
1.1 - 3.0 = night mode (1/40s - 2s, all zoom values above 3.0 = 2s)
(press and free snapshot key to enable/disable preview)
Macro on in Supermode: Macro & Spot light metering
Picture Quality FINE for EM, Picture Quality NORMAL Sub_EM(Fast EM, more noise than EM)
AE Lock: half press the shutter button for AE lock.
for easy use, you can change the names of the Effects menu.
The method: edit the language file *.lng with Lng Editor, and upload it to FS/TPA/PRESET/SYSTEM/LANGUAGE to replace the old one. for english, the file is en.lng.
[ This Message was edited by: leetiran on 2008-03-31 07:13 ]
Posted by Rokstar
my apologies to all the guys who I haven`t replied to, but I`ve got some personal matters to attend to at the moment so I won`t be posting for a while.There seems to be plenty of mods coming out to keep you all busy for quite a while, so have fun guys.
Rokstar.
[ This Message was edited by: Rokstar on 2008-04-01 08:21 ]
Posted by tommymar
On 2008-03-31 02:24:58, Sombra wrote:
On 2008-03-30 20:23:22, lpachuong wrote:
A4A-Final Release 30/03/2008
http://www.mediafire.com/?m9ljxd9ztxn
The same functions as the previous version.
A4A-Final Release 30/03/2008
http://www.mediafire.com/?m9ljxd9ztxn
The same functions as the previous version.
One question lpachuong: in my tests with this camdriver (previous Final Release), file sizes of photos is lower which others versions (280~300KB). This is normal?
Using others camdrivers JPEGSnoop result ever ~90% of compression factor, but with this "Final Release", this value is ever ~75%.
I dont think that is the problem. The reason why you only have size 280~300kb is bcz of the brightness of the picture in his previous driver. About his new driver, i dont have any problem ever and when i use jpegsnoop, i got ~90%.
lpachuong, the new sharpness is much better than last time. there is a balance between details and sharpness. Great work.
Posted by guarder
On 2008-03-31 07:58:01, leetiran wrote:
http://www.mediafire.com/?2xlyjfnxqsz
Menu_Superdriver 6.7(Modded raider6.7.2, by leetiran)
for people who cannot remember all functions of EV.
Effects menu for supermode:
Off for Normal(supermode off): zoom(+/-) 1.0-4.0 = 1x-4x;
Other for Supermode:
B&W for SCENES(profile):
zoom(+/-) 1.0 = auto
1.1 = landscape(Twilight_landscape in night)
1.2 = portrait(Nightportrait in night)
1.3 = sports
1.4 = beach/snow
1.5 = sunny
1.6 = cloudy landscape
1.7 = document
Negative for Custom WB & Effects:
zoom(+/-) 1.0 = default WB
1.1 = WB lock
1.2 = one push
1.3 = Effects off
1.4-1.9 = Effects
Sepia for Manual Focus
zoom(+/-) 1.0 = auto
1.1 = infinity
1.2 - 4.0 = manual (press and free snapshot key to enable/disable zoom 4x)
Solarize for Manual ShutterSpeed
zoom(+/-) 1.0 = auto
1.1 - 4.0 = normal mode (1/6400s - 1/8s)
1.1 - 3.0 = night mode (1/40s - 2s, all zoom values above 3.0 = 2s)
(press and free snapshot key to enable/disable preview)
Macro on in Supermode: Macro & Spot light metering
Picture Quality FINE for EM, Picture Quality NORMAL Sub_EM(Fast EM, more noise than EM)
AE Lock: half press the shutter button for AE lock.
for easy use, you can change the names of the Effects menu.
The method: edit the language file *.lng with Lng Editor, and upload it to FS/TPA/PRESET/SYSTEM/LANGUAGE to replace the old one. for english, the file is en.lng.
[ This Message was edited by: leetiran on 2008-03-31 07:13 ]
wonderful! but how can i use it on my phone?
Posted by lpachuong
A4A Final Reloaded Update 31/03/2008
http://www.mediafire.com/?32gxjjxuydb
Hello everyone. First of all, I am sorry for confusing you with the idea of 'Final'. From the last version, I recevied comments on sharpness and bugs, so I couldn't ignore them(thx Sombra, wickedsick, Kája and tommymar). Thank to Easter Holiday that I have some free time to check the code overall. Now I can guarantee that there is no bugs on this pack. There are some changes in my final driver.
Functions included:
- Normal Mode For EM off
- Fine Mode for EM on
- Default focus infinity + zoom preview at start up for quick shot
- Macro on for close-up shot
- Macro of for range shot
- EV -2.0: Manual magenta
- EV -1.7: Manual red
- EV -1.3: Manual blue
- EV -1.0: Manual Yellow
- EV -0.7: zoom (4x)
- EV -0.3: Force ISO
- EV 0.0: Manual Focus
- EV +0.3: Manual Exposure
- EV +0.7: Spot Metering
- EV +1.0: Manual ShutterSpeed
- EV +1.3: Manual Saturation for w810i/old w800/k750i
- EV +1.7: Manual whitebalance
- EV +2.0: Profile with scences
FAQ
- Why at the startup, there is no autofocus?
The focus default is infinity + zoom preview so that you can take picture quicker. If you want to have autofocus, change zoom to 1.1 then back to 1.0 - Why is there black screen while the pictures are being saved
In this driver, the delay time for some properties has been changed so that they are suitable with my calculation. The black screen is just a normal reaction to my solution. This will give you better quality. - Why my k750i get crash?
This is caused by high compression. On k750i, the compression is set to 92%. If you get crash edit the driver and change JQ_FINE= $s2 5c; to the value you want (use hex calculator) - How can I get the best colour
For the best colour (when default colour is wrong), please use EV +1.7. - WHy the ISO are not always at ISO100 as your previous drivers
In this driver, the iso for the outdoor shots will be ISO100, however, for the indoor shots, the ISO will vary. ALthough ISO may be different, there will be almost no noise in the pictures. This time I combine the sharpness and Iso to reduce noise in the pictures.
Hope you all enjoy.
Posted by strong
On 2008-03-30 20:30:04, wickedsick wrote:
On 2008-03-10 10:18:27, strong wrote:
WTF. I only have 1 account. Got it.
strong, your drivers are not as sharp as lpachuong's drivers in full size. Check it out man. And I dont care how many account you have any more.
Is not sharp? what about below photos are enough sharp or not?
what your opinion?
Keep your mind this : more sharpness=more noise
all auto EM
Posted by sotam
New window
New window
New window
Taken with my new version
http://sebg.110mb.com/CamDriv[....]_petkox_ray_W800-K750-W810.zip
[ This Message was edited by: petkoxray on 2008-03-29 20:55 ]
thanks
Posted by wickedsick
On 2008-03-31 14:41:30, strong wrote:
On 2008-03-30 20:30:04, wickedsick wrote:
On 2008-03-10 10:18:27, strong wrote:
WTF. I only have 1 account. Got it.
strong, your drivers are not as sharp as lpachuong's drivers in full size. Check it out man. And I dont care how many account you have any more.
Is not sharp? what about below photos are enough sharp or not?
what your opinion?
Keep your mind this : more sharpness=more noise
all auto EM
I highlighted area where your driver is not good in my opinion:
I just suggest you how to improve your driver without any bad ideas against you. When i take pictures with lpachuong's driver those weaknesses are not significant. I just feel bad when not many people try A4A whereas I feel it is better than your. It is just a point of my view. Sorry for making you misunderstand.
[ This Message was edited by: wickedsick on 2008-03-31 14:27 ]
Posted by Raiderski
wickedsick
don't you forget that this is 2mpx camphone? be more realistic. there is nothing bad on your pictures. otherwise post pictures where effects described by you aren't visible
cheers
Posted by strong
@Raiderski
I agree 2mpx with cmos sensor we not expect too much, the pics are mine
@wickedsick
no broblem friend but I ask your opinion for sharpness not for all this where you reported
[ This Message was edited by: strong on 2008-03-31 14:50 ]
Posted by kutlas
@leetiran
how can i activate supermode in you`re driver?
Posted by DangeloGH
lpachoung final
w810i cid49
Posted by lpachuong
Look like the CPU is cooked
Posted by MiHaU
On 2008-03-31 18:14:54, lpachuong wrote:
Look like the CPU is cooked
It rather looks like socket, not cpu. ;p
Posted by lpachuong
On 2008-03-31 19:20:36, MiHaU wrote:
On 2008-03-31 18:14:54, lpachuong wrote:
Look like the CPU is cooked
It rather looks like socket, not cpu. ;p
Of course i know it is the socket for the cpu. If you take a carefull look at the black spot, doesn't it look like the socket got overheated?
I got this idea was bcz I linked 3 pictures together. He must be repairing that computer. Anyway, it is just a joke and dont take it serious.
[ This Message was edited by: lpachuong on 2008-03-31 18:43 ]
Posted by DangeloGH
On 2008-03-31 19:38:48, lpachuong wrote:
On 2008-03-31 19:20:36, MiHaU wrote:
On 2008-03-31 18:14:54, lpachuong wrote:
Look like the CPU is cooked
It rather looks like socket, not cpu. ;p
Of course i know it is the socket for the cpu. If you take a carefull look at the black spot, doesn't it look like the socket got overheated?
I got this idea was bcz I linked 3 pictures together. He must be repairing that computer. Anyway, it is just a joke and dont take it serious.
[ This Message was edited by: lpachuong on 2008-03-31 18:43 ]
take easy guys , and how about the pictures? did you like?
ps: about the socket we give up
sorry about english
[ This Message was edited by: DangeloGH on 2008-03-31 19:19 ]