Super camera driver for k750/w800/w810

Posted by pofi
@strong
LOL...
ROFL..

@Raiderek
Like Strong's driver - preview is automatic.. I don't like the half shutter press just to preview shutter speed. I would like to see shutter speed while adjusting it. TIA...

Posted by Raiderski
pofi
you can like it or not but i will not make it in "old way", sorry
there was two good reasons why i did shutter preview on/off on half press:

1. if shutter speed is slow then autofocus will be slow and can be inaccurate - isn't this annoying for you? for me it is very much

2. if shutter speed is very slow then you won't be able to make picture because autofocus will be canceled after ~5 or 7 seconds (i don't remember exactly value) with failed status

give me good reason why you want forced shutter speed effect in realtime because i can't find any

if you wan't to see it during adjustments:
1. enable shutter speed preview
2. change value
3a. make shot
3b. disable preview and with normal autofocus make shot

_________________
K800 R1KG001 (camdriver 6.1)
raider.4shared.com
flickr.com/photos/raiderek

[ This Message was edited by: Raiderski on 2008-03-13 12:51 ]

Posted by pofi
I see.. Thanks for enlightening me.. Now I know why you didn't put preview on shutter speed. Anyway thanks..

I'll try your driver again.
Colors are very natural and exposure is just right for me.

Last question.
What's your driver ISO limitation? Because the last time I tried your driver it takes a lot of noise especially in dim lighted environment. ISO800 according to EXIF.. What do you think is the problem? Cam module incompatibility?

Posted by Raiderski
pofi
maybe this ISO information in EXIF was because of EXIF bug which was fixed in version 6.7.1u - real picture ISO was 100 but in EXIF was 800. in low light you should of course use EM or ENM modes - did you enabled them before shots?

Posted by dukempg
@SPU
Is there a way to disable shutter speed preview in 1.4b2? Focus becomes really slow when using Normal mode+MXE-60... Or maybe shutter speed preview could be disabled with MXE-60 on...

Posted by jonaugust_69
The last my driver

Super Camera driver for k750/w800/w810
Mod by Jonaugust_69 v55.65, 13-03-2008

Download
http://www.4shared.com/file/4[....]gust_69__v5565_13-03-2008.html

this link delete

Download Update(1)
Important correction for autoselection Cid

Super Camera driver for k750/w800/w810
Mod by Jonaugust_69 v55.65, 14-03-2008 Update(1)

http://www.4shared.com/file/4[....]5565_14-03-2008_Update_1_.html

For info view Readme file

_________________
k750 cid49 FW(w800 r1bc002)
Download Camdrivers for k(d)750/w800/w810(Site Mr.Kája) http://www.camdrivers.wz.cz/

[ This Message was edited by: jonaugust_69 on 2008-03-13 23:19 ]

Posted by strong
@razvan89
OK just joke

_________________
k750@w800 R1BC002 www.camdrivers.wz.cz/

[ This Message was edited by: strong on 2008-03-13 19:06 ]

Posted by dragonball75
Some shots from Strong's 6.0 Beta , all auto settings (just fixed focus used in some of them) :

The phone is the same of the other shots I attached some posts ago : K750i Cid36 , Rca021 (Eu5) .

Posted by razvan89
Can you make that on your driver?

Posted by strong
@dragonball75
nice but tell me is the colors real?

@razvan89
yes I can the codes is available , when I will finish the 6.0 I will send you the codes and you add them yourself in driver

Posted by jonaugust_69
Super Camera driver for k750/w800/w810
Mod by Jonaugust_69 v55.65, 14-03-2008 Update(1)

Important correction for autoselection Cid

Download
http://www.4shared.com/file/4[....]5565_14-03-2008_Update_1_.html

For info view Readme file

Erase the first version "v55.65_13-03-2008"

_________________
k750 cid49 FW(w800 r1bc002)
Download Camdrivers for k(d)750/w800/w810(Site Mr.Kája) http://www.camdrivers.wz.cz/

[ This Message was edited by: jonaugust_69 on 2008-03-13 23:12 ]

Posted by dragonball75
@Strong :
Yep , sincerely in the Raider I used in the previous posts , colors are more like the original ... in this beta are a little bit "washed"

[ This Message was edited by: dragonball75 on 2008-03-14 04:25 ]

Posted by MarkJason
@Kriomag - can help me pick the best value for EM/ENM? I'm using 3a and 3c but normal produces better pics... In your driver, you put 3d as the value but it's too long for EM..

Posted by razvan89
Ok.Thanks a lot.When you release the final version of 6.0?

Posted by strong
at few days some tests remaining

Posted by MarkJason
@Strong - You've modded Sarmad's driver right? Can you explain to me the EM code? I know it have 6 values, 4 for LED EM/ENM and 2 for EM/ENM... I know it's not your work, Sarmad is out in this forum. Thanks!

Posted by pofi

On 2008-03-13 15:18:41, Raiderski wrote:
pofi
maybe this ISO information in EXIF was because of EXIF bug which was fixed in version 6.7.1u - real picture ISO was 100 but in EXIF was 800. in low light you should of course use EM or ENM modes - did you enabled them before shots?

I'm using the latest driver - 6.7.2.. Already tried your driver. I think EM isn't enabled that's why I get noisy pics before. I downloaded a new copy with the configuration. It's better now. I like the colors and EV but a little bit sharpness would be better. Will adjust it using the config..

Thanks..

Posted by strong

On 2008-03-14 15:02:20, MarkJason wrote:
@Strong - You've modded Sarmad's driver right? Can you explain to me the EM code? I know it have 6 values, 4 for LED EM/ENM and 2 for EM/ENM... I know it's not your work, Sarmad is out in this forum. Thanks!

It has LedEM/EM/DEFAULT_SHOT/ ENHANCED_SHOT
as i can undestand for led it has 2 functions 1 for normal mode quality (normal-normal night) and second for fine mode where enable it with macro on
(fineEM-fineEMnigtht)

For EM it has 2 fuct 1 for EM and 1 for EMnight enable it with macro on

For DEFAULT_SHOT is normal quality shot and it has color corection

For ENHANCED_SHOT is fine quality mode it has color corection and takes
led white balance and looks at EM to take enhanced shot.

If someone knows better or wants correct me lets do it

Posted by markztrance
@ pofi:

WOW:o what on the world you have all the rubiks cube!!!
ive mastered 3x3 but i wish i have that 4x4 and 5x5, especially that weird starlike... em.. is it a cube??

BTW good driver

Posted by lpachuong
A4A-FINAL RELEASE
Link:
http://www.mediafire.com/?bbt0le1w2gx
Please read this post carefully to know how to use this driver

Functions
- Normal Mode: EM off, Sync with MX60
- Fine Mode: EM on, nice clear pictures
- Macro off: for no macro (normal shot)
- Macro on: for macro (close-up shot)
EV_M_20= CYAN;
EV_M_17= RED;
EV_M_13= BLUE;
EV_M_10= YELLOW;
EV_M_07= ZOOM;
EV_M_03= ISO;
EV_0_00= FOCUS; (zoom 1.1-infinity, zoom 1.2-4.0-manual focus)
EV_P_03= EXPOSURE;
EV_P_07= LIGHT_METERING; (1.1: spot on)
EV_P_10= SHUTTER_MOD;
EV_P_13= SATURATION; (good for w800i and w810i)
EV_P_17= WB_CORRECTION; (1.0-default, 1.1-1.5 for manual colour correction)
EV_P_20= PROFILE; (zoom 1.1: cloudy weather, 1.2: document)

UPDATES

Improved the stability of the codes and bugs fixed
Tested and tweaked hardware parameters (buses, frequencies, voltages, delays)
Improved the sharpness with new code + Pixels correction
k750i+w800i with Raidersky's compression for stablitly

HOW TO USE THIS DRIVER EFFECTIVELY

For those who are new to A4A driver, please read the instruction carefully before using it and make of copy of this instruction. It is suggested that you should spend 1 day to play with this new driver to get used to it and carry out different tests to decide whether it is good or not
Install the correct driver for your phone and the compression you want
Use Notepad to change some parameters as shown below
Feel free to report bugs (if you encounter them many times). This doesn't only help you but also help other A4A's users (A4A: All for All)

WHAT SHOULD I KNOW ABOUT THIS DRIVER?
- Please remember that there are three versions in the package: 2 for K750iW800i with 90% and 93% JPEG compression and 1 for W810i with 95% JPEG compression. If your phone K750iW800i can work well with 93% JPEG compression then it is suggested that you can use it for the best quality. If your K750iW800i cannot work at that compression, please use 90% JPEG compression.
- As can be seen from the example, there are significant differences in the two sharpness values: 06 and 07 . Sharpness=07 will give the best result with Pixels correction where as Sharpness=06 will have noise. You can change these value by editing the driver.
- Colour Balance (WB balance): If you cannot get the correct colour on the ViewFinder as that on the real scence, please choose EV +1.7 and zoom 1.1, wait for 3 seconds and start taking pictures. This is also good for taking picture with LED

WHAT PARAMETERS SHOULD I CHANGE

Sharpness: this can be change from the top of the code. The values you can change to are 05, 06 and 07.
Contrast: 01,02,03, top of the driver
EM default exposure: Search for IMP_SHOT and the scroll up to see EM = ...
$c0 01
$s0 42 $-0 r1
#CMDEM(04,$w0)
$cl
$s0 3f $-0 r1
#CMDEM(04,$w0)
$cx
If you get overexposure, please change 42 to 40 and 3f to 3e

Thank you for reading this instruction. Hope you all enjoy using it

PS: The attached pictures are taken with my K750i cid49 - Mainfirm: W800i r1bd001, FS: W700i r1bd001, GDFS: W700I r1bd001 (My w800i gdfs got damaged

) These pictures are not edited by any software.

[ This Message was edited by: lpachuong on 2008-03-15 17:30 ]

Posted by lpachuong
I have finally completed my project and got my results from the January Examination. Now, I can spend some of my free time improving my camera

Since I was busy and could not carry out many tests, I didnt update the beta drivers and even log-in ESATO

) I hope my new driver is suitable for your phone and you can have some funs with it.

To heiyei: Sorry bro, I forget how to spell your nickname. It is my bad

I am doing well and hope you too.
To lengthstreet: How are you doing? How is our baby? Best wishes to your family
To everyone: Have a nice weekend.

Posted by Mr.Kája
lpachuong: Great work ;o) I have added this driver on page without those 2photos, i hope, it doesn't matter?

Posted by sotam
OMG how many camdriver i cant decide......

_________________
I

W810i

http://bux.to/?r=jrmr

[ This Message was edited by: Armageddon on 2008-03-15 03:33 ]

Posted by MarkJason

On 2008-03-14 20:45:53, strong wrote:

Thanks for the explaination... I thought the EM is coded in auto detection with ranges from the two values... Now it's clear that its the same as all of the drivers.

Can you give me the best values for quick but with quality in EM? The values that you can use it in indoors with sufficient lighting.

[ This Message was edited by: MarkJason on 2008-03-15 06:04 ]

Posted by recl
for both 93/90 compression I get an error when I start the camera.."wrong camera driver version (0.0).please update camera driver to 4.5 or later"
I have CID 49 red k750i@w800i firmware R1Bc002

Posted by lpachuong
At the mm i dont have access to the internet. That error is caused by the firmware i will upload a fix for it when i have internet back or u can download on se-nse Sorry about this

Posted by Golku
i get the same error to ( "wrong camera driver version (0.0).please update camera driver to 4.5 or later" )

Posted by recl
ok I'll wait for bug fix

Posted by jonaugust_69
blue sky Greece

Posted by sotam

i get the same error to ( "wrong camera driver version (0.0).please update camera driver to 4.5 or later" )

i have the same bug in my w810

Posted by lpachuong
http://www.mediafire.com/?bbt0le1w2gx

[ This Message was edited by: lpachuong on 2008-03-15 17:30 ]

Posted by strong
@jonaugust_69
great blue and green!

@MarkJason
Raiderskis EM code I think is the best

_________________
k750@w800 R1BC002 www.camdrivers.wz.cz/

[ This Message was edited by: strong on 2008-03-15 18:00 ]

Posted by tommymar
Big thanks to you, lpachuong. I have tried your drivers and they are good so far. I feel sharpness 06 is good for long range shot and sharpness 07 is good for dark and close range shot. Hope you could "mix" these two values together so that it become more flexible.
Btw, I dont have any problem with your driver as others say.

Posted by gemosi81
is there any way i can install different cam drivers on my w810 phone at 1 time and just use 1 driver so i can test different drivers much easy.. im totally noob in flashing.. all i know is to copy the cam and acoustic driver files using xs++...

[ This Message was edited by: gemosi81 on 2008-03-15 19:39 ]

Posted by heiyei
@ gemosi81

Since you are aware of coping the cam and acoustic drivers i hope you can find a vkp patch for moving drivers to others in phone memory...i know the pacthes are available for k750 and w800 but not sure about w810...and it also depends upon the firmware you are using....by using this patch you can change the drivers which you have placed in "others" folder to "drv" folder in the same!!! I am also a kinda lazy guy so i find this patch useful but i wasnt that lazy to ask somebody else..hope you find it!!!

@lpachuong

hey bro nice to hear from you and since you are free now hope we can meet often and i have yet to try your A4A FINAL (Final ?!

) cause i thought it would be better on a R1CA021 and had near death experience of my k750 but finally fixed it may be i post some pics with your driver tommorow!!!

@jonaugust_69

very lovely pictures...and i guess greece still has natural scenic beauty and graceful scholars in abundance

!!!

[ This Message was edited by: heiyei on 2008-03-15 21:27 ]

Posted by strong
@heiyei
yes still has and beautyful girls too

Posted by MarkJason
@Strong - Thanks for the reply...

[ This Message was edited by: MarkJason on 2008-03-16 02:58 ]

Posted by Sombra
@lpachuong:

This final release of your camdriver works fine in my K750i CID49 R1BC002 at compression 93%.

Tomorrow i make some tests.

Question: for what reason Zoom Preview as reduced?

Thanks for this work.

Posted by heiyei
@all

I feel that the A4A and Strong Drivers will be the best subtitute for each other...like if you are an A4A user you may also like Strong drivers and vice versa...you may wonder why iam saying all this??....its because a long time back...1 1/2 years ago...strong told me the same but i never got a chance to try his drivers cause i was very much obsessed with lpachuong's driver and he was also very much active....or i must say hyper active...but when he was busy with his exams and almost dissapeared from esato i got to use Strong
5.8 final and was equally pleased as with A4A....but now i switched back to A4A not that i dont like Strong drivers but for the special bond...if possible i will also make a comparision between A4A and Strong Drivers!!!

@lpachuong

nice work brother the driver did not crash at 93% compression..and this is the first time my old k750 has been able to handle this compression...but will take some time to post the pictures cause my mem card is corrupt and there is not much photographic scene around here all i get to see is smoke...dirt...buildings..and cars

On 2008-03-16 02:05:39, strong wrote:
@heiyei
yes still has and beautyful girls too

I know that but it is so obvious that nobody has to mention about them...since i am an artist by hobby...i used to look at the sculptures and wonder about the symetery and proportion of the body...it shows the extensive study of the human anatomy...and in addition i am one crazy bodybuilder i also get ideas from the sculptures and art work of greek people not to forget they are the ones who started olympics!!!

Posted by Sombra
@lpachuong:

I modified Focus Preview Zoom in driver code for use 8x, but is very dificult for adjust focus in this zoom value.

I go re-edit driver code for use habitual 4x Zoom, but my doubt is why you choose 2x for this?

BUG: This problem occur in olders versions of A4A, when Focus Preview Zoom is used, if shot button is pressed without disable function, photo is saved zoomed in focus zoom value.

Sorry for my poor english.

_________________
K750i CID49 (R1BC002) - lpachuong's A4A Final Release

[ This Message was edited by: Sombra on 2008-03-16 13:25 ]

Posted by lpachuong
Thank you for testing the driver

@Sombra: for your question about zoom, I am sorry bcz my phone is k750i cid49

and it doesn't support taking zoom pictures for me to test. Therefore i dont know much about this property. I will try to borrow my friend's phone and I will update it when I have time.

@Tommymar: I have the same feeling as yours. However, it is difficult for me to find out a good value of sharpness so that you can have both details and softness. It is really pity, isn't it.

Posted by Milu
Lpachuong. gr8 driver. berr for U...
_________________
camdrivers.lua.pl Everything about camdrivers.

[ This Message was edited by: Milu on 2008-03-16 14:10 ]

Posted by Sombra
Ok lpachuong, this problem with zoomed shots no is a great problem.

Suggest: If possible, add Kriomag's code for auto selection of spot light metering when Focus Prevew Zoom is enabled.

Posted by petkoxray

Posted by wickedsick
@lpachuong: thank you for your new driver

@petkoxray: which camdriver did you use? the last three pictures are very good at both sharpness and colour.

Posted by dragonball75
@petkoxray : as you , playing with the raider config. , I've found that for my K750 cid36 (Rca021) the sharpness value 05 really improve the shots quality .
Good pics pal

Posted by petkoxray
Here is my 2.5 version mod of raiderski cam driver using config_tool again by raiderski

http://sebg.110mb.com/CamDrivers/Raider_MOD_petkox_ray_v2.4.zip

Posted by Popek189
Strong 6.0 beta
D750i@K750i CID36 R1DB001
Pictures are ONLY desaturated in Adobe Photoshop CS3

[ This Message was edited by: Popek189 on 2008-03-16 18:40 ]

Posted by petkoxray

On 2008-03-16 19:21:53, Popek189 wrote:
Strong 6.0 beta
D750i@K750i CID36 R1DB001

[ This Message was edited by: Popek189 on 2008-03-16 18:35 ]

First picture must be edited,it can't be 1mb...

Posted by Popek189
@petkoxray
my fault, accidentally posted the edited one. Now it is original, desaturated only