Super camera driver for k750/w800/w810

Posted by petkoxray

@Strong u can put in your new version Kriomag WB Balances

This is just idea

Posted by ilidan
Thanks Strong, but my phone always restarts when I turn off low profile. Thats with 5.8 and 6.0. Thank you, anyway.
I will try Sarmad's 5.8 as it has NM/FEM/SEM. I need a way to reduce noise on indoor pictures.

Posted by 679
@Kriomag

For K750 CID36.
A question for 21.93 using. For example in EM, MACRO=ON i've set custom WB (i.e. EV->0.7->EV->0.3). OK?
But also i want for this custom WB to set max SATURATION (EV->-2.0).
Seems it is impossible, coz when i set EV=-2.0 i pass throw EV=0.0, -0.3 and default WB will be set

.
Can it be done by other way?

Thx

Posted by ben11

On 2008-03-06 11:00:30, ilidan wrote:
Thanks Strong, but my phone always restarts when I turn off low profile.

Me too..

Posted by dukempg
@SPU

You made a great driver, and put a new use to night mode in my cell (which I had abandoned for ages since I got my MXE-60). My question is about MXE-60: Can I increase the compression level? 50% is very low and because photos generally comes with noise, which is magnified by the compression

Posted by SPU
dukempg
It's very easy. Open the driver and change value DF_MXE_JPEG_QUALITY in the Config section (default value is 32 = 50%). Don't set it above 75% because the MXE can be out of sync in this case.

Posted by dukempg

On 2008-03-06 18:31:25, SPU wrote:
dukempg
It's very easy. Open the driver and change value DF_MXE_JPEG_QUALITY in the Config section (default value is 32 = 50%). Don't set it above 75% because the MXE can be out of sync in this case.

Thanks a lot SPU! I'll keep it at 70% to be on the safe side. BTW, is there a way to have sharpness set at zero only for Night Mode and MXE-60? In this two cases a lot of noise by the sensor is produced and like to use Neat Image to remove the noise before sharpening when post-processing. This produces much better results IHMO.

Posted by Kriomag

On 2008-03-06 11:47:10, 679 wrote:
@Kriomag

For K750 CID36.
A question for 21.93 using. For example in EM, MACRO=ON i've set custom WB (i.e. EV->0.7->EV->0.3). OK?
But also i want for this custom WB to set max SATURATION (EV->-2.0).
Seems it is impossible, coz when i set EV=-2.0 i pass throw EV=0.0, -0.3 and default WB will be set

.
Can it be done by other way?

Thx

it cant be done

ive never had need to use custo wb + max saturation

if You need this options combined i can replace normal EV change (when macro is off) to saturation change, then you will do like that: set custom wb -> turn macro off -> set saturation

i will think about improving this...

Posted by 679

On 2008-03-06 20:30:07, Kriomag wrote:
it cant be done

ive never had need to use custo wb + max saturation

if You need this options combined i can replace normal EV change (when macro is off) to saturation change, then you will do like that: set custom wb -> turn macro off -> set saturation

i will think about improving this...

Thx, in fact i set high (14) init saturation and semi-resolve this problem. Now it is color-poor scene around (due to the winter) so i need pick-up colours... In spring and summer i'll reduce saturation...

Posted by pofi
@Strong
What is this for?
MACRO_ZOOM= 08; // 10=x4 - 20=x2 - 08=x8
Macro zoom for preview or the actual shots taken when macro is enabled.

Posted by Raiderski
zoom close-up ratio in manual focus preview

Posted by strong
@pofi
as Raiderski said is his invention

@Raiderski
Iam looking for code how can I reset brightness and contrast at profiles can you help me a little?

@petkoxray
already testing

_________________
k750@w800 R1BC002 www.camdrivers.wz.cz/

[ This Message was edited by: strong on 2008-03-07 12:58 ]

Posted by Raiderski
strong
i looked in 5.8 profile code, you have first version which was problematic. look:

PROFILE=
...
$c0 0a
// 1.0 = reset all settings
$cl
// profiles at 1.1, 1.2, ...
$cx

in user language this is:
1.0 = all settings to auto
1.1 = apply 1.1 settings
1.2 = apply 1.2 settings
...

do you see problem? if you want to apply 1.2 then you must to pass 1.1 and settings from 1.1 won't be moved to auto state (they can affect profile 1.2 where shouldn't be active). you must reset all settings every time when you change profile. i did this change in 6.5 final (don't remember exact version). look at profiles code in 6.7.2 and replace to this:

PROFILE=
...
// reset all settings
$c0 0b
// profile 1.1
$cl
// other profiles at 1.2, 1.3, ...
$cx

reset code can be slow - code optimization advised

Posted by petkoxray

With raiderski_MOD_by me

[ This Message was edited by: petkoxray on 2008-03-07 15:31 ]

Posted by strong
OK thanks for your time Raider

Posted by Popek189
Strong 6.0 "unofficial beta"
Free Image Hosting at <a href=

http://www.ImageShack.us" />

Some weird grain in the pic

Ok, I'm waiting for the official one

[ This Message was edited by: Popek189 on 2008-03-07 20:57 ]

[ This Message was edited by: Popek189 on 2008-03-07 20:58 ]

Posted by strong
@Popek189
please edit your post this is only unofficial beta version

@Raiderski
finaly profile it works fine thanks!
_________________
k750@w800 R1BC002 www.camdrivers.wz.cz/

[ This Message was edited by: strong on 2008-03-07 22:38 ]

Posted by number1

On 2008-03-07 19:52:09, Popek189 wrote:
Strong 6.0 "unofficial beta"
Free Image Hosting at <a href=

http://www.ImageShack.us" />

Some weird grain in the pic

Ok, I'm waiting for the official one

[ This Message was edited by: Popek189 on 2008-03-07 20:57 ]

[ This Message was edited by: Popek189 on 2008-03-07 20:58 ]

lower the sharpness it will reduce the grain.

Posted by petkoxray

Posted by Golku
@petkoxray

nice pictures witch driver did you used?

Posted by petkoxray

On 2008-03-09 20:36:06, Golku wrote:
@petkoxray

nice pictures witch driver did you used?

I'm using my modded version of raiderski driver

Here u can download it:
http://sebg.110mb.com/CamDrivers/Raider_MOD_Petkox_ray_v1.99.zip

Posted by strong
Samples from SuperFunction v6.0 BETA

All auto + infinity

Posted by markztrance
@ strong

wow!!

nice driver!!
BTW gotta upload it later. have to go to school for now.
cant wait to test it.

Posted by petkoxray

Code:

ChangeLog v2.0:

-Image Filtering Enabled only in EM NightMode for sharpness outdoor picutres

-New better BufferSize For bigger pictures ~600kb

-JPEG Compression 90% in Fine and Normal Mode

-LiveColor Color Correction For best colors ever 

-Better Sharpness Value

ChangeLog v2.1:

-Added more exposure for better light

-Added Manual Focus 

ChangeLog v2.2:

-Added more Sharpness

-Fixed Bug with Over Exposure

Ето и снимки от драйвера:
http://sebg.110mb.com/index.p[....]ivers%2FLiveColors_petkox_ray/

[color=red]!!!!The pictures was taken with beta drivers,now driver have many fixed and better things,especially sharpness!!!![/color]

[size=18][color=blue]Download Now[/color][/size]

Posted by dragonball75
Sorry petkoxray , but there something that don't goes on your 2.2 revision ... it's all overexposed , result the screen is ultra-bright-white ... can't see nothing . Got a Cid36 K750i Rca021 .

Posted by jorgerolonpy
In my w810 also i see only ultra bright white....in ev-2 i see normal screen..

Posted by petkoxray
Sry my friends now i fix the bug

http://sebg.110mb.com/CamDriv[....]%20CAM%20v2.3%20petkox_ray.zip

Posted by dragonball75
Just tested with some pics ... all ok , great low-light cond. stability ; I'll take tim e to make some shots on the daylight tomorrow and will post something ... for now , really good work petko

Posted by petkoxray

On 2008-03-10 21:35:41, dragonball75 wrote:
Just tested with some pics ... all ok , great low-light cond. stability ; I'll take tim e to make some shots on the daylight tomorrow and will post something ... for now , really good work petko

I am happy that you appreciat my job

tnx

Posted by strong
I release for testing the SuperFunction BETA v6.0

http://www.sendspace.com/file/fnif7h

Posted by italmeida
Very Good

Posted by Popek189
Strong 6.0 beta

Posted by jonaugust_69
Hi all

Super Camera driver for k750/w800/w810
Mod by Jonaugust_69 v55.65, 11-03-2008, For test(1)
In the EXIF view v7.1

Download
http://www.4shared.com/file/4[....]65_For_test_1__11-03-2008.html

Picture Quality Normal: SUPER SCENES FUNCTION

Picture Quality FINE: You can select
// 00 => SUPER FUNCTION
// 01 => STANDARD + MANUAL FOCUS + Color Correction
MODE_FM=$s0 00;

__________Features_____________________________________________

- Cid autoselection for Color Correction-Sharpening-Saturation

- Color Correction for Cid49 and Cid36.

- You can ON/OFF zoom preview by clicking half-shutter
zoom preview only in Picture Quality FINE, EV +0.3 (MANUAL FOCUS)

- SPOT for Zoom Preview is enabled
press shutter to take picture with SPOT (very useful with macro shooting)
or
click half-shutter again (the zoom will go off and SPOT will be disabled)
and now press shutter to take picture.

- With Change Scenes fps is fast,
if press shutter to take picture, fps reset to default in Scenes, and take picture
if click half-shutter, fps reset to default in Scenes for preview.

- ZOOM PHOTO
Normal Mode =>1X to 16x
Night Mode =>1X to 12x

- Fast Zoom for Normal and night mode
ONLY FOR PHOTO: After zoom click half-shutter for reset to default for Scenes fps

- ZOOM VIDEO
Normal Mode =>1X to 16x
Night Mode =>1X to 8x

- Automatic Exposure lock: half press the shutter button for lock AE, move to subject, press shutter,
except Scene 1.2 and 1.3 in Picture Quality Normal.

- Support MXE-60 flash

Effects property
-----------------
- Normal: => Normal

- Negative: Normal Mode => Negative - SPOT off
Night Mode => Effect normal - SPOT on

- Solarize: Normal Mode => Solarize - Backlight off
Night Mode => Effect normal - Backlight on

- Sepia: => Sepia

- Black&white: Normal Mode => Effect normal - Bilinear Filtering off
Night Mode => Black&white - Bilinear Filtering on
__________________________________________________________________

Function in Picture Quality Normal:
-----------------------------------

- Enhance mode is supported LED.
for Shutter with Enhance mode and LED Select Manual WB to AUTO

- Change focus: Macro on => autofocus.
Macro off => focus to infinity.

- Change Zoom: Macro on

- Change EV: Macro off, OR LED ON, change value EV (+/-),
EXCEPT Scenes (1.1), EV change only if LED ON

- For all Scenes, EXCEPT (1.1): Manual Focus/Manual WB, Macro on adjust EV (+/-)

EV-2.0=WB => cloudy \
EV-1.7=WB => clear sky \
EV-1.3=WB => fluorescent }Focus => marco mode
EV-1.0=WB => Incandescent /
EV-0.7=WB => auto /
EV-0.3=WB => Manual default /
EV 0.0=WB => Manual default, Focus => the complete range
EV+0.3=WB => Manual default \
EV+0.7=WB => auto \
EV+1.0=WB => Incandescent \
EV+1.3=WB => fluorescent }Focus => the normal range (without the macro)
EV+1.7=WB => clear sky /
EV+2.0=WB => cloudy /

- Change Scenes: Macro off, Press Zoom key to change

Scenes: 1.0 Normal
1.1 Manual Color Correction, change EV (+/-)
(13 Defaults settings for CC )
You can change EV if LED ON,
click LED on => adjust EV (+/-) => click LED of => select Color Correction and take picture.

1.2 Normal Mode => Landscape, (Enhance mode) adjust EV (+/-)
Night Mode => Night Scene,
1.3 Normal Mode => Portrait
Night Mode => Night Portrait
1.4 Sports
1.5 Normal Mode => Normal Scene, (Enhance mode) adjust EV (+/-)
Night Mode => Normal Scene, (Enhance Night mode) adjust EV (+/-)
1.6 Normal Mode => Normal Scene, Manual Shutter speed, change value EV (+/-)
1.7 Document
1.8 Beach/snow
1.9 Night Scene/Manual FPS, change value EV (+/-)
2.0 - 4.0 Normal Scene

---------------------------------------------------

Function in Picture Quality FINE: change only EV+0.7=>Manual WB
(1.0 Manual default WB, 1.1 Lock AE, 1.2 auto WB, 1.3 Incandescent, 1.4 Fluorescent, 1.4 clear sky, 1.5 cloudy, 1.6 tuning on the object, 1.8 lock WB)

Posted by dragonball75
Some shots with Petkoxray 2.3 , as promised , all auto settings (need to know what are the advanced function of the driver ....) just opened the sensor and shooted them :

Posted by petkoxray
There is no special functions

Like normal driver u can control only white balance

Maybe i will make soon superfuncion driver

Posted by strong
At first look at driver I can see the last Raiderskis surermode driver without functions in functions list
is a driver made it by config tool
where is your job?

So you must rename the driver to Raiderski 6.7.2 modded driver by ...........

Sorry but let's be objective and fair

@jonaugust_69
Good job my friend
Regards
_________________
k750@w800 R1BC002 www.camdrivers.wz.cz/

[ This Message was edited by: strong on 2008-03-12 00:29 ]

Posted by dragonball75
Sorry petkoxray , but I'm fully with strong on this fact ...

@strong : I'm testing your beta too , in the afternoon I'll post some shots

Posted by jonaugust_69
Thank you, @Strong

Posted by Raiderski
hmm...
i compared code of this driver and my last 6.7.2 release. i must say that i don't understand idea of Petko driver at all

every single change in Petko version of my driver can be done in 6.7.2 with my configuration tool included in release. changelogs posted by Petko have nothing to do with reality

so, what's the point of Petko release? as for me this is ONE BIG NONSENSE

if this is the way for future modding then i must say that this is stupid way

dohh... "LiveColors�"... isn't better to write: no additional color saturation? marketing everywhere

_________________
K800 R1KG001 (camdriver 6.1)
raider.4shared.com
flickr.com/photos/raiderek

[ This Message was edited by: Raiderski on 2008-03-12 13:40 ]

Posted by pofi
Have some respect! It's the modder's intellectual rights.. Even if you mod it a little please give credits for the original modder..

@ Raiderek
How can I auto preview shutter speed on your driver? Do you know the version of my cam module? I have a CID50 w810i - cid 36? What do you think? Thanks..

[ This Message was edited by: pofi on 2008-03-12 14:01 ]

Posted by Raiderski
i explained everything with Petko and case is closed

i don't claim any rights to code. moreover i would like to see many great drivers from new/old modders. if parts of my code is necessary to do this then use it as much as you need

pofi

How can I auto preview shutter speed on your driver?

wait wait! write once again (more details) what you want to do

maybe you mean 'manual' not 'auto'? and of course for any CID in W810 you should use W810 version of driver where CID doesn't matter

_________________
K800 R1KG001 (camdriver 6.1)
raider.4shared.com
flickr.com/photos/raiderek

[ This Message was edited by: Raiderski on 2008-03-12 14:57 ]

Posted by razvan89
Great work,sir Strong.The Custom WB is an excelent feature of your driver.I'd like to ask a few questions
-can you add at Profile Section zoom 1.1 (Take pictures always with ISO80)
-can pictures with max shutter speed be with iso80
-what did you improve in this last driver
-can you make a linear smooth zoom on normal mode and night mode
-can you add focus settings(1.1 fast focus,1.2 full range,1.3 fast&full range,1.4macro mode)
-can you add more SCENES like Green Grass and Cold Scene(supercam 8.54)
-can you add CHANGE JPEG LEVEL
-can you add Slowshutter
-can you add ISO setting
If it's possible add this features at CUSTOMIZE FUNCTION LIST
If you can do this,your driver will be the best supercam for W810

Posted by gedas5
@ Raiderski

i love to watch your photos from time to time because they are great!!!

but u used to take pictures with your K750 as far as i remember

are you still taking them with it or are u using K800 now? Bees are great!!!

Posted by Raiderski
gedas5
thx! i sold my old W800 and now K800 is in my pocket - i love it

to be honest when i saw all pics from that day when bee was captured i was surprised - details level in snapshots from modded K800 is really impressive

Posted by milan91
Yes

bee is amazing

Your pics and with w800i and with k800i are amazing

________________________________________________________
http://www.flickr.com/photos/milanche91

[ This Message was edited by: milan91 on 2008-03-12 20:08 ]

Posted by strong

On 2008-03-12 17:38:43, razvan89 wrote:
Great work,sir Strong.The Custom WB is an excelent feature of your driver.I'd like to ask a few questions
-can you add at Profile Section zoom 1.1 (Take pictures always with ISO80)
-can pictures with max shutter speed be with iso80
-what did you improve in this last driver
-can you make a linear smooth zoom on normal mode and night mode
-can you add focus settings(1.1 fast focus,1.2 full range,1.3 fast&full range,1.4macro mode)
-can you add more SCENES like Green Grass and Cold Scene(supercam 8.54)
-can you add CHANGE JPEG LEVEL
-can you add Slowshutter
-can you add ISO setting
If it's possible add this features at CUSTOMIZE FUNCTION LIST
If you can do this,your driver will be the best supercam for W810

Thats it I quit

_________________
k750@w800 R1BC002 www.camdrivers.wz.cz/

[ This Message was edited by: strong on 2008-03-12 22:18 ]

Posted by pram_zx
@Strong
Hahahahah.........

Posted by MarkJason
Have someone improve the filtering algorithm on K750/W800 or I have to stick with #CMD(5b, 00)?

[ This Message was edited by: MarkJason on 2008-03-13 05:15 ]

Posted by razvan89

On 2008-03-12 21:39:08, strong wrote:

Thats it I quit

_________________
k750@w800 R1BC002 www.camdrivers.wz.cz/

[ This Message was edited by: strong on 2008-03-12 22:18 ]

Sorry for questions....