Super camera driver for k750/w800/w810

On 2008-01-10 10:44:43, SPU wrote:
MarkJason
MXE is a special case.
In the original driver this is done in SET_JPEG_QUALITY macro:

We have quality value in r2 then we call SET_JPEG_QUALITY

SET_JPEG_QUALITY=
$p1 0e //check out MXE state
$c1 01 //if MXE is on
$s2 32 //override quality value (32 = 50%)
#SET_JPEG_MIN(00,01) //set min size to 1KB to avoid crash
$cx //end if
07 02 00 13 $w2 $w2 $w2 #CMD_END; // finally apply quality settings.

May be you'll find something like this in the modded drivers.

BTW, IMHO, synchronization with MXE also depends on cam_ss_sync value, but i can't check this =( I have no MXE.

On 2008-01-10 23:38:04, Kriomag wrote:

who uses high ISO ? you must be a masochist
if you take picture with high iso the detail level are same as low as you would have taken this picture with 640x480 resolution and then resized it to 1632x1224

On 2008-01-11 09:32:15, 679 wrote:


Yes you are right, but not completely. I think masohist got pleasure taking picture during near 10s in ENM, trying be steady and breathless .
Realy with "$s0 3a" i got ISO 160, max exp 1s and good result even in night.
Problem for me is that i need '3a' only for ENM, not for EM to, but cant put "40" for EM and "3a" for ENM separately.
Maybe it is possible?
Thx.

On 2008-01-11 07:18:44, MarkJason wrote:
Guys, what will happen if i do this?

seq_set_prop_8_0=06 02 00 01 %0 53 #CMD_END
06 02 00 01 00 08 #CMD_END;

seq_set_prop_8_1=06 02 00 01 01 08 #CMD_END;

It is posiible:

change "$s0 3a" to:
"
$p2 07 <-- place value of property 7 in internal register 2
$c2 00 <-- if value of register 2 is 0 = normal mode is selected
$s0 40 <-- set register 0 value to 40 = best EM
$cl <-- if value of register 2 is other than 0 = night mode is selected
$s0 3a <-- set register 0 value to 3a - best (in your opinion) night mode
$cx <-- end...
"

On 2008-01-11 10:58:17, Raiderski wrote:
you can also try this:

EM_MSS_APPLY=#EM_STATUS
$c1 00
// cut here everything and put:
#CMD(03,01)
$cl
$c7 00
$cl
#MSS_APPLY
$cx
$cx;

final pics with ISO160 and half exposure time of original EM

On 2008-01-11 11:03:52, 679 wrote:
Wow. But it is for 21.93, right? May be it is possible to use this part as macro block? Bcs in 21.93 there are some places with "$s0 40".

On 2008-01-11 11:22:03, Raiderski wrote:
679
yep

On 2008-01-10 20:06:13, Tomix wrote:
I see many of you change the cam modules... What is this cam module and where to get it and how to change?

On 2008-01-11 13:11:37, MarkJason wrote:
@Kriomag - Your code doesn't work... Black&White still works... And if i put my code it crashes when i select B&W..

CMD=06 02 00 01 !1 !0 #CMD_END;

seq_set_prop_8=$s0 %0

                       $c0 00 #CMD(08,00)

                                 #CMD(53,00) $cl 

                       $c0 04 #CMD(08,01) $cl

                                 #CMD(53,$w0)

                       $cx $cx;

On 2008-01-12 15:57:56, SonarikK510 wrote:
Dear great modders! Please, look at K550 camdriver! Maybe you create a great camera driver for our phone! Please! I am tired with my Most High Quality! Is it not "Most High Quality" for real....

On 2008-01-12 16:12:39, SonarikK510 wrote:
Colour Correction is works on K550/W610?

On 2008-01-12 16:05:12, SonarikK510 wrote:
Kriomag, It is a pity, I heard your driver one of the best. And my development for K550 not especially outstanding
I would like to make SuperMod. But instead of keys EV to use Effects, and instead of keys of a zoom - keys EV. It is possible? (Because in K550 keys of zoom is unactive)

On 2008-01-12 16:30:56, SonarikK510 wrote:
number1, maybe we let's unite our forces in camdriver modding?
Our work on the single seems to me has led us up a blind alley. The following driver should be simply cardinalю

Kriomag, Thanks for you work.

On 2008-01-12 22:11:29, pietropizzi wrote:
@ Kriomag and number1

Could you please post your NeatImage profiles for:

K750@ W800 CID49 and
for my K800@ K810

Thank you !

On 2008-01-12 10:56:59, Raiderski wrote:
leetiran
yep small problem. when you enable MFP (zoom x4 and disabled image filtering) and then go back to non-manual focus (x1.0, x1.1) zoom x4 will be canceled but image filtering will be still disabled. this is without effect for snapshots because image filtering state is updated just before snapshot, so nothing more as small visual issue

removed #CMD(5B,01) indeed remove this issue but this isn't solution because in this way you will not disable image filtering in MFP mode (we need disabled img. filt. because of more sharpness which is necessary in precise manual focus). solution is somewhere else, in SET_FOCUS macro:

#MFP_STATUS
$c1 02
#CMD(5B,00) <--- add this line
#CMD(61,00)
$cx

or in better way:

#MFP_STATUS
$c1 02
#MFP_UNSET
$cx

On 2008-01-13 21:28:14, number1 wrote:
try turning the whitebalance off, #CMD(11,80)

On 2008-01-13 23:07:43, Raiderski wrote:
WB profiles are too weak to help, at least for all white lights in my city with WB profiles results are: green, cyan (closest) or yellow. color correction is my friend in this case (cyan can be balanced with red). i never pay attention on this but isn't auto WB reaction different for various power (luminosity) of lights? something like small power can be balanced from green to blue but big power will stay at green. hmm, i must check this closely tomorrow