Posted by loucostanza
Modders
Year of 2007 will be end soon. I don't want miss the chance to say thanks for you guys. Thank you very much for all of your works this year.
Below are my favorite photos of this year. Just let me share you my happiness. See what has your works done for me
Kriomag's
Sarmad's
Raiderski's
SPU's
Posted by EddieAdams
Hey all,
Look, I know its annoying having to explain this to us "newbies" but I really don't want to mess up my w810i. I really want to get the most out of my camera and would like to install one of the modded cam-drivers but quite literally haven't a clue where to start.
1)Which is best for w810i? Sarmad's or the super or whatever else you might recommend.
2)A step by step instruction on downloading. If I need any patches, links to sites and so on....
3)Also, how to install on my phone? step by step
It's something I normally would try to figure out on my own but, again I really don't want to damage my beloved w810i.
My current software version is:CXC1250316 R4EA031
Thank You very much. It is greatly appreciated.
Posted by whatsucka
using lpachuong driver
Christmas morning... i use nite mode with 2x zoom
pitch black in my room... nite mode on
nite mode with flash on
heart shape mushroom??
Posted by razvan89
Which of these two is better?(8.54 or 8.52).Can anyone make a table of 8.54 driver with ISO and Manual Shutter value?The table from page 3 and the table from page 33 is in connection with driver 8.54?Sorry for my bad english
Posted by razvan89
There is no supercamera in 8.54 driver?If is a supermode how can i active?
Posted by Kriomag
On 2007-12-29 18:11:38, pRo_lama wrote:
Sarmadīs 6 - CID49 R4EA031 W810i
- really good cam driver Look at my pics. What do you think ???
I love first picture other also v good
Posted by leetiran
Raiderski
i think EM no need so complicated, just using slow shutter is ok. such
as #CMD(05,01) #CMD(03,01). giving the limite and autoexposure by camera
Posted by Raiderski
guys, i will post 6.7.1 today but without config tool. you won't be able to customize driver because code is incompatible with previous version of the tool. i have no time to finish it because tomorrow i must leave and i have some other things to do. damn! end of the year and i'm as always in big hurry and still with unfinished things at the beginning of the new year:(
i wish all of you happy new 2008 year!
don't drink, eat, smoke and f**k too much on parties
i am saluting and marching off... will be back in several hours
Posted by Mazahaka
happy new year!
thanks for everything!
Posted by gissever
thanks for moders and all members.
I wish happy new year and new years for all.
Posted by Raiderski
camdriver v6.7.1 + config tool v0.5.3
download link a bit below in my signature
config tool is finished, somehow i made it on time
changelog
Code: |
|
1. not worth to mention
2. a bit better EM/ENM
3. led settings from 6.7 were good but only if room isn't lighted up with incandescent light source (warm yellow light). this combination produced very yellowish pictures because of fluorescent WB (warm) type used in led settings. led light is cold, that's why i used fluorescent WB (as in original driver) to make it warmer. in any other case, for example in natural light (even low) led color correction was fine. i decided to create much more flexible solution. this time led do not use any own WB settings but only warm color correction if necessary. led settings will cooperate with WB selected in menu - you can try to make led photos with every possible WB and observe results. with this type of settings in room with incandescent light source i can select auto WB and use led light - final color balance will be much better. one more thing, 6.7.1 will not use color correction for led if you change any of colors (cyan/red, yellow/blue) to manual mode (above x1.0). so, for example: you can set any (above x1.0) red correction and this correction will be visible on photo taken with led. simply, you will not lose manual color correction settings, which is very important
4. nothing more to say, everything is described (you can find this solution also in Kriomag 21.93 beta)
this versions of driver & tool are after small facelifting, so, pay attention on potential issues. i hope you'll not find anything for me it works very good
will be back in several days...
cheers everyone and once again happy new year!
Posted by Vipera ammodytes
selected WB | color correction
--------------------|-------------------
auto | warm (combination of red* and yellow**)
incandescent (cold) | warm (as above)
other (warm) | none (daylight, cloudy, fluorescent are warm)
* - will be applied only if cyan/red is not manually increased by user/profile
** - will be applied only if yellow/blue is not manually increased by user/profile
i am i bit confused
is that only for LED???
btw you are the king
_________________
EX sasha-SE
[ This Message was edited by: Vipera ammodytes on 2007-12-30 22:43 ]
[ This Message was edited by: Vipera ammodytes on 2007-12-30 22:45 ]
Posted by Raiderski
yes
"compromise in WB and CC settings for led light"
and only for led this light is cold and without small color correction looks bad on auto and incandescent WB. of course if we are using incandescent WB only in room with very yellow light it's hard to find ideal solution (is this even possible?) but this small change can improve final result. i think this isn't last word in this matter that's why i'm always waiting for suggestions
_________________
W800 CID36 R1BD001
www.flickr.com/photos/raiderek (photos)
raider.4shared.com (driver and config tool)
[ This Message was edited by: Raiderski on 2007-12-30 23:00 ]
Posted by hillgx
On 2007-12-30 23:33:44, Raiderski wrote:
camdriver v6.7.1 + config tool v0.5.3
download link a bit below in my signature
all happy new year!
@Raider
Raider.4shared.com Internal Server Error
There are other download address?
Posted by Raiderski
here...
http://downloads.wow-info.net/se/drivers/camera/raiderski/latest/
Posted by hillgx
@ Registered
Thank
I will test it
Posted by Xthar
what file do i actually upload to my phone. And where at on my phone. Im new to the whole phone thing. If anyone has msn and they could help it would be great. My addy is Justin at xthar.be
Also i have the SE W810i
[ This Message was edited by: Xthar on 2007-12-31 04:22 ]
Posted by MarkJason
Sorry but i just wanna ask something... I'm using Andeo's 7.7f with a little mod... I know its kinda obsolete comparing those new drivers out there with CC etc... I wanna know if how to put SPOT PHOTOMETRY on my camdriver? This is the code to enable SPOT right? 06 02 00 01 01 08 #CMD_END... How can i have my camdriver SPOT enabled when i press + (ZOOM 1.1) and when i press - (ZOOM 1.0) it will disable SPOT... Hope someone can teach me... I don't use ENM etc coz i have a MXE-60 flash and i wanna point and shoot kinda cam so i don't want major adjustments... I made to make MXE-60 use 92% compression... Its ok and i'm getting 500kb+ sizes... ^_^
Posted by cronos555
some more christmas lights shots with Raider's 6.7 driver. most are manually set to ISO160, shutter 1/10s
Posted by Vipera ammodytes
some pictures taken with 6.7.1
Infinity
and 2 using some manaul settings
_________________
EX sasha-SE
[ This Message was edited by: Vipera ammodytes on 2008-01-01 20:24 ]
Posted by jala100pres
lengstreet 5.11
Posted by Tomix
@Raiderski
Hi, I'm using your camdriver 6.7.1 with conf.tool and i like it, but i have a noob question: What is ISO and how to set it in your driver, because in configtool i can't find that setting or i need better glasses?
Posted by Vipera ammodytes
set your exposure, ev +0.3. zoom value 2.0 = iso 100 zoom value 2.1 = iso 100. 2.2 = 125, 2.3 = 160, 2.4 = 200 ....
BIG THANKS TO CRONOS555
_________________
EX sasha-SE
[ This Message was edited by: Vipera ammodytes on 2008-01-01 22:55 ]
Posted by Tomix
Ok, understand, but what is this ISO? What does it does? I see there "exposure compensation" is it ISO?!!!
[ This Message was edited by: Tomix on 2008-01-01 23:04 ]
Posted by MarkJason
Does today's camera drivers can set ISO and SHUTTER SPEED separately? Let say ISO 100 and 1/15?
When I enable SPOT PHOTOMETRY on my camera driver by writing the code on the SEQ INT does SPOT is use all the time or does it automatically use SPOT when necessary?
And one more thing about CID49 K750i... Have you made it ZOOM at full resolution?
[ This Message was edited by: MarkJason on 2008-01-02 03:06 ]
Posted by leetiran
Raiderski and the other modder
I think EM/ENM need not so complicated. just using the CMD03 to set slow shutter limit is ok, such as "#CMD(05,01) #CMD(03,01) #WAIT_FOR_MODE". SET ISO=100, set slow shutter limit=2s, and then autoexpose by the camera itself, so the picture will never be overexposure.
Posted by leetiran
Enhanced Standard Camdriver
different EM/ENM codes. The picture will never be overpexposed.
The other codes are almost all from Raider6.6. so it can work with Raider6.6 configtool0.51.
picture fine quality: Enhanced Mode.
picture fine normal: Standard Mode.
macro mode: full range focus ; spot Light Metering.
download link:
http://www.mediafire.com/?1w2lxnmpxb6
[ This Message was edited by: leetiran on 2008-01-03 09:32 ]
Posted by MarkJason
Is the SPOT metering default? or you have to press something to activate it?
Posted by hillgx
raider 6.71 camera driver
default settings
(W810i)
Posted by MarkJason
Hi! i just wanna ask all the modders something...
06 02 00 01 00 08 #CMD_END <- This code represents SPOT OFF right?
if i change that to 06 02 00 01 01 08 #CMD_END it would be SPOT ON...
If I would put 06 02 00 01 01 08 #CMD_END in the SEQ_INIT... Would SPOT ON be the default and my camera will always use SPOT PHOTOMETRY or will it know when to use CENTER WEIGHT or SPOT PHOTOMETRY? Hope you could answer my questions... Thanks in advance!
Posted by leetiran
On 2008-01-02 07:27:23, MarkJason wrote:
Is the SPOT metering default? or you have to press something to activate it?
do u ask me for the Enhanced standard driver? macro on active it.
If I would put 06 02 00 01 01 08 #CMD_END in the SEQ_INIT... Would SPOT ON be the default and my camera will always use SPOT PHOTOMETRY
yes, it will always use SPOT PHOTOMETRY
Posted by MarkJason
Thx for the reply...
Can I ask for a favor? How can I make a standard driver use SPOT ON when I press + key or ZOOM 1.1 and ZOOM 1.0 SPOT OFF... I don't know the coding...
I don't know how to make the driver read the key strokes and assign a key for SPOT ON and OFF...
[ This Message was edited by: MarkJason on 2008-01-02 10:46 ]
Posted by 679
Raiderski,
Happy New Year!
And a question. Using 6.7.1 in 21.92 style found the problem/bug?.
I am shooting the same scene. WB on AUTO
1. in Macro OFF - i.e. AF - snap OK
2. in Macro ON - i.e. MF - snap OK
But WB is different for both snaps. Seems for 2. WB is more cold.
Any suggestions?
[ This Message was edited by: 679 on 2008-01-02 16:40 ]
Posted by leetiran
On 2008-01-02 11:12:03, MarkJason wrote:
Thx for the reply...
Can I ask for a favor? How can I make a standard driver use SPOT ON when I press + key or ZOOM 1.1 and ZOOM 1.0 SPOT OFF... I don't know the coding...
I don't know how to make the driver read the key strokes and assign a key for SPOT ON and OFF...
[ This Message was edited by: MarkJason on 2008-01-02 10:46 ]
I think using picture fine/normal or macro on/off for spot on/off may be better.
put "06 02 00 01 00 08 #CMD_END" after "seq_set_prop_5_0=", "06 02 00 01 01 08 #CMD_END" after "seq_set_prop_5_1=" make picture normal/ fine for spot off/on
Posted by MarkJason
Ok... I get it now... but what will happen to my NORMAL/FINE more? Do the values I set for NORMAL and FINE mode take effect? and also the MXE-50 comppression? What about if I put it in SET_SEQ_PROP_18? instead of SET_SEQ_PROP_5... what will it do?
Posted by leetiran
On 2008-01-02 15:22:54, MarkJason wrote:
Ok... I get it now... but what will happen to my NORMAL/FINE more? Do the values I set for NORMAL and FINE mode take effect? and also the MXE-50 comppression? What about if I put it in SET_SEQ_PROP_18? instead of SET_SEQ_PROP_5... what will it do?
it doesnt affect other funtion. I think nothing will happen when put it in SET_SEQ_PROP_18, because SET_SEQ_PROP_18 has no link with camera menue.
Posted by Raiderski
i found that ISO value in EXIF isn't properly saved in 6.7.1 - updated version is available on:
raider.4shared.com
http://downloads.wow-info.net/se/drivers/camera/raiderski/latest/
version name: 671u
admins of other mirrors: please actualize
MarkJason
Does today's camera drivers can set ISO and SHUTTER SPEED separately? Let say ISO 100 and 1/15?
yes
1. you can set manual shutter speed at any time and final pic always have ISO100
2. ISO100 value from point 1 can be increased with exposure compensation (EV) function because when shutter speed is locked at constant value then EV cannot be changed (that's why ISO is used in this case)
Do the values I set for NORMAL and FINE mode take effect? and also the MXE-50 comppression? What about if I put it in SET_SEQ_PROP_18? instead of SET_SEQ_PROP_5... what will it do?
as leetiran wrote: in SET_SEQ_PROP_18 nothing will happen. if you put spot photometry in selected quality then it will be available always and only in this quality. of course you can put spot on/off everywhere, if you're not using b&w/solarize/sepia/negative effect then maybe this is good place for you?
Tomix
this page will explain you everything:
http://www.megapixel.net/html/articles/article-highiso.php
in practice:
- high ISO photos from our cameraphones are very noised
- low ISO isn't always the best idea (high ISO = shorter exposure time)
leetiran
thx. i will check your idea, some free time is required
679
time gap between shot 1 and 2 for auto WB is very important. auto WB is trying to stabilize colors for selected scene which can take some seconds. macro on/off switch probably has nothing to do with this. you can try this:
1. open camera
2. select macro on/off
3. wait some seconds for auto WB stabilization
4. snap
5. macro state switch
6. snap
compare pics
Posted by Vipera ammodytes
Hi radier
i got 1/5 shutter speed in this picture but i dont know how, i didnt turned on night mode... does exposure have diferent shutter speed at zoom 4.0??
i tried few times but i cant get 1/5, i only got 1/8 and 1/10
is there any way for 1/5 shutter speed without night mode? slow screen preview is not really good.(night mode plus shutter speed +0.7 at 2.1 zoom)
thanks
_________________
EX sasha-SE
[ This Message was edited by: Vipera ammodytes on 2008-01-03 00:44 ]
Posted by MarkJason
@ Leetiran and Raiderski - Thanks for answering my questions... But the NORMAL and FINE thing is not yet clear for me... If I put
SET_SEQ_PROP_5_0 = 06 02 00 01 00 08 #CMD_END
SET_SEQ_PROP_5_1 = 06 02 00 01 01 08 #CMD_END
How about this? Does this still affect the NORMAL/FINE compression?
seq_set_prop_5_0=$z0 $p1 0e
$s2 55
$c0 01 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,0F) #SET_JPEG_AVG(00,05) #SET_JPEG_QUALITY $cl
$c0 02 #SET_JPEG_MIN(00,03) #SET_JPEG_MAX(00,05) #SET_JPEG_AVG(00,04) #SET_JPEG_QUALITY $cl
$c0 03 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,28) #SET_JPEG_AVG(00,0F) #SET_JPEG_QUALITY $cl
$c0 04 #SET_JPEG_MIN(00,32) #SET_JPEG_MAX(00,50) #SET_JPEG_AVG(00,3C) #SET_JPEG_QUALITY $cl
$c0 05 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,40) #SET_JPEG_AVG(00,96) #SET_JPEG_QUALITY $cl
$c0 06 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,08) #SET_JPEG_AVG(01,72) #SET_JPEG_QUALITY $cl
$c0 07 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,e0) #SET_JPEG_AVG(01,5e) #SET_JPEG_QUALITY $cl
$c0 08 #SET_JPEG_MIN(01,2C) #SET_JPEG_MAX(01,90) #SET_JPEG_AVG(01,5E) #SET_JPEG_QUALITY
$cx $cx $cx $cx $cx $cx $cx $cx;
seq_set_prop_5_1=$z0 $p1 0e
$s2 5a
$c0 01 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,0F) #SET_JPEG_AVG(00,08) #SET_JPEG_QUALITY $cl
$c0 02 #SET_JPEG_MIN(00,05) #SET_JPEG_MAX(00,08) #SET_JPEG_AVG(00,06) #SET_JPEG_QUALITY $cl
$c0 03 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,28) #SET_JPEG_AVG(00,14) #SET_JPEG_QUALITY $cl
$c0 04 #SET_JPEG_MIN(00,50) #SET_JPEG_MAX(00,78) #SET_JPEG_AVG(00,5A) #SET_JPEG_QUALITY $cl
$c0 05 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,54) #SET_JPEG_AVG(01,2C) #SET_JPEG_QUALITY $cl
$c0 06 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,1c) #SET_JPEG_AVG(01,cc) #SET_JPEG_QUALITY $cl
$c0 07 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,f4) #SET_JPEG_AVG(01,a4) #SET_JPEG_QUALITY $cl
$c0 08 #SET_JPEG_MIN(01,90) #SET_JPEG_MAX(02,30) #SET_JPEG_AVG(01,EA) #SET_JPEG_QUALITY
$cx $cx $cx $cx $cx $cx $cx $cx;
Posted by e_erzan
This thread is still very2 alive.....wow....
Posted by leetiran
MarkJason
seq_set_prop_5_0=$z0 $p1 0e
$s2 55
$c0 01 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,0F) #SET_JPEG_AVG(00,05) #SET_JPEG_QUALITY $cl
$c0 02 #SET_JPEG_MIN(00,03) #SET_JPEG_MAX(00,05) #SET_JPEG_AVG(00,04) #SET_JPEG_QUALITY $cl
$c0 03 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,28) #SET_JPEG_AVG(00,0F) #SET_JPEG_QUALITY $cl
$c0 04 #SET_JPEG_MIN(00,32) #SET_JPEG_MAX(00,50) #SET_JPEG_AVG(00,3C) #SET_JPEG_QUALITY $cl
$c0 05 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,40) #SET_JPEG_AVG(00,96) #SET_JPEG_QUALITY $cl
$c0 06 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,08) #SET_JPEG_AVG(01,72) #SET_JPEG_QUALITY $cl
$c0 07 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,e0) #SET_JPEG_AVG(01,5e) #SET_JPEG_QUALITY $cl
$c0 08 #SET_JPEG_MIN(01,2C) #SET_JPEG_MAX(01,90) #SET_JPEG_AVG(01,5E) #SET_JPEG_QUALITY
$cx $cx $cx $cx $cx $cx $cx $cx
06 02 00 01 00 08 #CMD_END;
seq_set_prop_5_1=$z0 $p1 0e
$s2 5a
$c0 01 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,0F) #SET_JPEG_AVG(00,08) #SET_JPEG_QUALITY $cl
$c0 02 #SET_JPEG_MIN(00,05) #SET_JPEG_MAX(00,08) #SET_JPEG_AVG(00,06) #SET_JPEG_QUALITY $cl
$c0 03 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,28) #SET_JPEG_AVG(00,14) #SET_JPEG_QUALITY $cl
$c0 04 #SET_JPEG_MIN(00,50) #SET_JPEG_MAX(00,78) #SET_JPEG_AVG(00,5A) #SET_JPEG_QUALITY $cl
$c0 05 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,54) #SET_JPEG_AVG(01,2C) #SET_JPEG_QUALITY $cl
$c0 06 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,1c) #SET_JPEG_AVG(01,cc) #SET_JPEG_QUALITY $cl
$c0 07 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,f4) #SET_JPEG_AVG(01,a4) #SET_JPEG_QUALITY $cl
$c0 08 #SET_JPEG_MIN(01,90) #SET_JPEG_MAX(02,30) #SET_JPEG_AVG(01,EA) #SET_JPEG_QUALITY
$cx $cx $cx $cx $cx $cx $cx $cx
06 02 00 01 01 08 #CMD_END;
Posted by leetiran
On 2008-01-02 23:44:25, Raiderski wrote:
leetiran
thx. i will check your idea, some free time is required
Raiderski
ok if my idea is ok, i think maybe you can add the iso and slowshutter funtions. slowshutter funtion neednt too many values, just giving 2s,1s,1/2s,1/5s is ok, and neednt preview, just apply it in taking picture. And maybe EM/ENM also can be out of shutterspeed1.1 into slowshutter funtions1.1.
[ This Message was edited by: leetiran on 2008-01-03 05:25 ]
Posted by MarkJason
@ Leetiran - BIG THANKS! ^_^
Last question, what does FULL RANGE FOCUS do?
[ This Message was edited by: MarkJason on 2008-01-03 07:06 ]
Posted by pram_zx
@Raiderski
Bro....can you update your configtool, so...w810 can be set the compression at 100%(since sarmad did it and it work perfect)?
Thanx B4
Posted by leetiran
On 2008-01-03 07:59:32, MarkJason wrote:
@ Leetiran - BIG THANKS! ^_^
Last question, what does FULL RANGE FOCUS do?
[ This Message was edited by: MarkJason on 2008-01-03 07:06 ]
full range focus=normal focus+macro focus
Posted by MarkJason
So what can you say about full range focus? is it better than normal focus? Is there a way to speed up the focus when in night mode and not affecting the other?
Posted by pram_zx
@Mark Jason
Full Range Focus mean you have auto focus from Infinity to macro, not only macro that can focus only from 10-40 cm.
Just Try Raiderski Driver !!!, you will not meet slow auto focus on viewfinder(except you press half shutter once before take the picture)
Posted by MarkJason
So its better to have NORMAL FOCUS rather than FULL RANGE? Their drivers are great... Many new features and stuffs but I don't like the ENM... I have a MXE-60 Flash so basically I only need a camera driver that's good on outside shots (CLEAR, SHARP and FAST ) and will sync with my MXE-60...
Posted by pram_zx
It depends on your self. Full range focus mean more slower to take focus than normal focus.
In Raiderski you can disable this EM/ENM if you want. and it sync with MXE 60
BTW, What your phone?
Posted by MarkJason
K750i -> W800i CID49