Posted by shajul
@Raiderski
i am using your camera driver 6.6 with many profiles.. wonderful driver and the profiles editing is just magnificent!!
i replaced professional driver 8.6 (super 8.54 modified) i was using the since a long time, but i miss the 16x zoom. The zoom was also very smooth.
could you please incorporate this feature if possible!
thanking you in advance..
PS: attaching the old driver i was using (with 16x smooth zoom) (click here)
EDIT: I just copy-pasted the code from the old driver and it seems to work fine. I know i did exactly what u warned against doing, but till the time u can have a look, this seems a workable option.
Please correct me if i am wrong 
[ This Message was edited by: shajul on 2007-11-27 15:24 ]
[ This Message was edited by: shajul on 2007-11-27 15:48 ]
Posted by MRSUBHAN
why can't i use the zoom buttons?
is there a good camera driver which you can use zoom in?
Posted by cronos555
here is an example of what Raider is talking about:
1st shot low ISO, slower shutter. ISO=80, shutter=1/1600s
2nd shot higher ISO, faster shutter. ISO=200, shutter=1/5000s
note that brightness and colors look almost exactly the same on both pics, yet on 2nd pic because of higher ISO, i am able to use a faster shutter and "freeze" water spray better.
all shots with Leetiran's mod of Raider 6.6 driver.
Posted by pram_zx
OK!
Thanx to leetiran, Raiderski and Cronos555.
I will try leetiran mod 6.6.
Posted by pram_zx
@leetiran
in your raiderski 6.6 mod, I can still use raiderski camconfigtool right?
and it doesn't change your mod right? the behavior is just like the original raiderski 6.6?
Posted by Randolph
@ Sombra and others:
Sombra, I will try out your method of installation. But I have one question on point 1 ( 1 - Instead of upload camdriver to phone using only FSX method, first flash the FS file desired using XS++ ):
Is it really necessary to flash the file system newly tot he phone? Now i use a hack where drivers are stored to another location, different menue and acoustic settings... Do you think just writing the camdriver to the phone with far and sefp plugin for cid49 will be ok when afterwards the main firmware is flashed and a master-reset is performed?
kind regards,
Randolph
Posted by metallica1
Just Perfect Color
Strong 5.6 Auto-Setting, just Macro-Mode On, Normal Mode.
Original Size:
http://rapidshare.com/files/72900906/Original_Photo_W810i.rar
A very very Perfect Wallpaper for Your Computer!
Posted by dzonitebra
Moon Sarmad 5.8
Posted by leetiran
On 2007-11-28 06:29:03, pram_zx wrote:
@leetiran
in your raiderski 6.6 mod, I can still use raiderski camconfigtool right?
and it doesn't change your mod right? the behavior is just like the original raiderski 6.6?
Yes
Posted by sunils120
hey guys can anybody tell me whether sharpness can be increased or not in my CID-49 R4DB005 W810i using any Camdriver??
I presume its only for the cid 36 k750 ones!
Posted by milind0212
Can neone tell me how 2 install v8.54 camera drivers on ma w810i ??????
They r in .dat format
Posted by murz2005
Is it possible to change something in driver to make shots with numeric keys (2, 3, 5, 6, 8, 9, 0, #)?
Posted by Raiderski
small update to clean some things...
camera driver v6.6.1
http://downloads.wow-info.net[....]1_configtool_051_by_raider.zip
- improve:
in normal mode manual shutter speed is starting from 1/6400s (previously 1/5000s)
issue in EXIF: 1/6400s is visible as 1/5000s (this may be depends on firmware)
- improve:
manual shutter speed safe limits verification is no longer needed. somehow camera crash on long times in night mode isn't present any more
issue in EXIF: values higher than 2s are visible as 2s
- improve:
manual shutter speed always use ISO100 and exactly exposure time (thanks leetiran)
unfortunately this trick won't remember your color correction settings
Posted by dukempg
Thanks Ridersky for the new release!
Posted by Raiderski
MRSUBHAN
because you are using 'supermode' driver where zoom keys have a bit different usage
shajul
I know i did exactly what u warned against doing
naahh
if you know what are you doing then it's fine
sunils120
if you're using standard camera driver then after exchange to modded driver you should be able to see differences
murz2005
no
dukempg
you welcome
Posted by pikszel
Hello All.
I don't understand Sombra's method. Why flash the MAIN firmware and the FS any time when change the driver? This is weird.
Here is my method on my K750_CID19_>_W800_R1BC002.
1. Apply the move driver to other.vkp.
CID36 is enough the FAR manager, but CID49 needs XS++ and FAR.
CID36:
- Turn off the phone.
- Start the FAR manager and set
Device: DCU-60
Speed: 921600
Boot script: k750_w800_CID36
and press Enter The Matrix. - Now hold pressed the C button and connect the DCU-60.
- You see 2 directory, FLASH and FS. Enter the FLASH and you will see MEMORY.
- In the other side of the window select the vkp and copy it to the memory (press F5). In the popup window don't modify settings just press Copy, then Flash.
- Disconnect the phone and remove the battery for 1 minute, then start the phone.
CID49:
- Turn off the phone.
- Start XS++ and click Start. Now hold pressed the C button and connect the DCU-60. Select k750w800_r2e_dcu.49r.ssw (FAR directory/Plugins/Sefp) in the Main firmware selector then press Flash.
- If it done (about 5 sec), press CLOSE, disconnect DCU-60 and remove the battery about 5 secs.
- Start the FAR manager and set
Device: DCU-60
Speed: 921600
Boot script: k750_w800_CID49
and press Enter The Matrix. - You see 2 directory, FLASH and FS. Enter the FLASH and you will see MEMORY.
- In the other side of window select the vkp and copy it to the memory (press F5). In the popup window don't modify any settings just press Copy, then Flash.
- Now select the rest_W800_R1BC002.bin (for your phone type from the FAR directory/Plugins/Rest) and press COPY then FLASH.
- Disconnect the phone and remove the battery about 5 secs and start the phone.
2. With MyPhoneExplorer make a directory in phone memory/other: drv
3. Copy the camdriver0.dat to the drv directory and the camera is useable now.
4. Install the MiniCommander java app. (or any filemanager like Moby Explorer or OperaMiniMod)
5. Make a directory on the phone with any name then copy the preffered drivers here.
6. Start the MiniCommander (or any ...) and change the driver anytime, anywhere without PC.
>>> Here is the video of the change progress. <<<
>>> XS++ and FAR manager <<<
>>> W800_R1BC002_move camdriver_to_other.vkp <<<
>>> MiniCommander <<<
_________________
"Az egyedüli létezô dolgok az atomok és az üres tér; minden egyéb puszta képzelet"
[ This Message was edited by: pikszel on 2007-11-30 10:34 ]
Posted by don_gori
@pikszel the main difference between Sombra's method and usual method to upload camdriver is pictures quality
I made this test to find out which method is better look here
http://www.2shared.com/file/2489279/5f87925e/Test_Methods.html
Posted by pikszel
@don_gori
I see only a little white balance difference between photos. The light measurement may cause this.
The uploading method an effect onto the picture quality? This is strange. So strange.
sorryforbadenglish
_________________
"Az egyedüli létezô dolgok az atomok és az üres tér; minden egyéb puszta képzelet"
[ This Message was edited by: pikszel on 2007-11-29 21:19 ]
Posted by don_gori
@pikszel yes there is not big difference
Now I'm trying your method and will post some shots
Posted by aabg
hey Raiderski new release thanks
im very happy with 6.6 now i will upgrade to 6.7
Posted by sunils120
@raider
a small doubt :- i have
810 CID49. Can i install ur cam driver directly through Phone XS++ v 3.0 without far manager and everything else?? Also will editing the sharpness value in notepad(for camdriver0.dat) from 05 to 06 for CID 49 be safe?
many thanks.
Posted by cronos555
@Raiderski
thanks for new cam drive.
request - can you please add control of SSP (shutter speed preview) to config tool to allow user to control SSP operation as follows:
1. always on (default)
2. always off
3. on only in nightmode
i feel that ssp is really helpful for night shots, but not very useful in day time shots. control as above would be really nice.
[ This Message was edited by: cronos555 on 2007-11-30 21:12 ]
Posted by shajul
@Raiderski
Thank you for the encouragement.. and the new driver
Posted by leetiran
@Raiderski
thanks for new camdriver!
@cronos555
SSP appears only when you half press and then free snapshot button. So i think it have no influence on day time shots if you take shots as normal.
[ This Message was edited by: leetiran on 2007-11-30 06:24 ]
Posted by cronos555
@leetiran
i think the main purpose of ssp is to keep the screen fps high so when using very slow shutter (at night for example), the screen fps stays high (updates faster) so one can still aim the camera at object & see object clearly, instead of waiting for 2-3 secs for screen to update.
however in the daytime, when using fairly fast shutter speeds, ssp doesn't help much, since screen fps is fairly fast due to high shutter speeds. so it forces an extra push of shutter button everytime you want to preview what you're shooting ... especially now since ISO+shutter can be tweaked for each shot.
hope that made sense
Posted by leetiran
@cronos555
oh, now i know exact your meaning of ssp. you mean the SSP-funtion not just ssp.
I think it may be better to say that the purpose of ssp is to show the effect of exposure and the ssp-off is to set focus easily when shutter speed is very slow.
[ This Message was edited by: leetiran on 2007-11-30 08:31 ]
Posted by smuko
@Raiderski: thanks for the new release! I haven't changed camdrivers since your last release and I'm pretty sure this will be the last camdriver I'll ever upload to my phone.
Posted by sunny2007
strike event in DongGuan China
[ This Message was edited by: sunny2007 on 2007-11-30 10:01 ]
[ This Message was edited by: sunny2007 on 2007-11-30 10:04 ]
Posted by hillgx
@ sunny2007
This is the phone shots?
Posted by Raiderski
cronos555
ok
test version for you will be tomorrow or in sunday
sunils120
i used XS++ 3.1 (latest stable) to upload 6.6 to K750 CID49 - everything went smoothly without any problems. i remember that sharpness 5 is better for W810, maybe some users can approve this?
Posted by cronos555
@leetiran
exactly
@Raiderski
niiiice!
@sunils120
i use sharpness=5 on my w810.
Posted by johny_boy_
I have got this problem on my w810i whenever i download a video only sound of the video get heard the screen gets blank and that video get save in sound not in video section some one please help thanks in advance
Posted by Raiderski
i would like to extend functionality in next release
for now if you change driver type to 'standard' (no supermode) then you can use default keys to control EV and zoom but it would be nice to have focus control also don't you think?
the question is how? quick idea:
EV keys will control EV value (nothing new in 'standard') and zoom keys will control focus (independent from EV value). as you may notice zoom control is kicked out and this isn't the best idea because some of you probably use zoom often
we want to have focus control and zoom control - any good ideas?
cronos555
tomorrow...
Posted by krzychu
@Raiderski
try to make this:
EV keys - control EV value
zoom keys - in normal mode control zoom, in macro mode control focus
i think it's a good idea to have focus and zoom control
what do you think about it?
Posted by Sombra
@Rabdolph:
Unfortunatelly, yes, is needed reinstall file system.
@pikszel:
How I quote in my guide, also don't know the reason for difference in quality, since which FS is only the file system and for this I discover incidentally.
Now, one shot taked after update my acoustic driver (yes, any change in FS affect photo quality)
Photos ever are darkened, photo taked on sunny day (see shadow on public phone at left)
Noise level also is ever higher (see sky) and general image appear blury
Now, photo of fortress taked after re-upload with method of my guide:
Detail: at final day and low sunlight, photo have minus noise and not have blury appearance.
See older post if desire see others photos and i remember which nobody need believe in this, but i and don_gori can see difference, no much, but perceptible.
Sorry for my poor english.
[ This Message was edited by: Sombra on 2007-12-01 20:10 ]
Posted by tommymar
Hi all.
First of all, thanks raiderski for your new driver. I've tried it and it is very good. However, since I have sticked with lpachuong's driver for a long time so I have just modded your driver in lpachuong's way and I would like to share it to everyone:
http://www.mediafire.com/?9yuezlpjlgm
It is an upgrade of raiderski's driver with:
- Added correcting flicker
- EM is always on
- New compression method (95%) (Raiderski, could you please have a look at it)
- Corrected colour for LED at night
Give it trial and you may see the different.
Hope you all enjoy.
Thanks to Raiderski and Lpachuong.
[ This Message was edited by: tommymar on 2007-12-01 19:04 ]
Posted by aabg
@Raiderski
contrast doesnt work on my w810, i increase it t0 1.1 and to 4.0 and all pictures where the same :?
Posted by Randolph
here again some pics shot with raider 6.6, foucs infinite, normal&auto:
spots are dirt on the car´s windshield...
Posted by jonaugust_69
Super Camera driver for k750/w800/w810
Double Supermode (Picture Quality Normal v54.7 - Picture Quality FINE v8.64)
Mod by Jonaugust_69 v54.64, Update(5)_2-12-2007
Download
http://rapidshare.com/files/7[....]driver_Update_5__2-12-2007.zip
Update(5)
---------------------
- Fix problem with (autofocus-Infinity) in Picture Quality FINE.
- change menus in Picture Quality FINE
- Add Scenes for Manual Shutter speed in Picture Quality Normal
Normal Mode => 3.7 640, 3.8 400, 3.9, 250, 4.0 125
Night Mode => 3.7 1, 3.8 0,75, 3.9, 0,5, 4.0 auto
- ZOOM PHOTO
Normal Mode =>1X to 12x
Night Mode =>1X to 12x
ONLY FOR PHOTO
Stepping him Zoom, fps they increase in order to we have fast Zoom,
click half shutter, fps they come back in the regular price of scene that we selected.
We can take the picture immediately without we step half shutter
the picture it will have regular fps the scene that we selected.
- ZOOM VIDEO
Normal Mode =>1X to 16x
Night Mode =>1X to 8x
- For Cid49
Different Color Correction for Normal and Night Mode
In rooms with tungsten, select Night Mode and WB auto.
-----------------------
__________________________________________________
- Cid autoselection for Color Correction-Sharpening-Saturation
- Cid49 default CC profile by My, Cid36 no correction CC.
- You can ON/OFF zoom preview by clicking half-shutter with Focus to Infinity or Manual Focus
- Zoom preview disabled with autofocus
- SPOT for Zoom Preview is enabled
press shutter to take picture with SPOT (very useful with macro shooting)
or
click half-shutter again (the zoom will go off and SPOT will be disabled)
and now press shutter to take picture.
- Support MXE-60 flash: For Scenes Without Enhance Night mode and Without Manual Shutter speed.
_____________________________________________________
Function in Picture Quality Normal:
____________________________
- Scene 1.2 Normal Mode => Landscape with Enhance Mode.
- Scene 1.6 Normal Mode => Normal Scenes with Manual Shutter speed, adjust EV (+/-)
and daylight and night to change value.
- Enhance Night Shot: Just only turn night on, this is automatic work. Manual Exposure adjust EV (+/-).
- EnhancNight mode is supported LED.
- Scenes Without Enhanc Night mode:
Scenes 1.1, 1.2, 1.3, Scenes (ISO), Scenes (speed).
- Scene 1.1 Sports and 1.5 Document, autofocus set (marco mode ~4cm - ~30cm)
for all the other Scenes, autofocus set (auto mode).
- Automatic Exposure lock: half press the shutter button for lock AE, move to subject, press shutter.
- Change focus => Macro on = autofocus.
Macro off = focus to infinity.
- Change Zoom => macro on,
- Change Scenes => Macro off, Press Zoom key to change
....................................................................
Scenes: 1.0 Normal
1.1 Sports (Without Enhance Night mode)
1.2 Normal Mode => Landscape, with Enhance Mode
Night Mode => Twilight landscape, (Without Enhance Night mode)
1.3 Normal Mode => Portrait
Night Mode => Normal, (Without Enhance Night mode)
1.4 Normal Mode => Beach/snow
1.5 Document
1.6 Normal Mode => Normal Scene, Manual Shutter speed, adjust EV (+/-)
1.7 Photometry SPOT
---------------------------------------------------
1.8 Scene Normal => CC_PILYA
1.9 Scene Normal => CUSTOM_CC_1
2.0 Scene Normal => CUSTOM_CC_2
---------------------------------------------------
2.1 Scene Normal, Bilinear Filtering (Normal off , Night: on, other scene on)
2.2 Scene Normal, Contrast set 03
-----------------------------------------------------
Effects
2.3 negative, 2.4 solarize, 2.5 sepias, 2.6 CH/B, 2.7 negative sepia, 2.8 negative ch/B
--------------------------------------------------------
ISO
Normal Mode => 2.9 100, 3.0 125, 3.1 160
Night Mode => 2.9 200, 3.0 320, 3.1 400
-------------------------------------------------------
Manual Shutter speed
Normal Mode => 3.2 6400, 3.3 5000, 3.4 3200, 3.5 2500, 3.6 1600, 3.7 640, 3.8 400, 3.9, 250, 4.0 125
Night Mode => 3.2 10, 3.3 4, 3.4 2.5, 3.5 1.66, 3.6 1.33, 3.7 1, 3.8 0,75, 3.9, 0,5, 4.0 auto
- Can be changed ISO together EV (+/-)
--------------------------------------------------------
Function in Picture Quality FINE:
------------------------------------------------------
Function change, EV (+/-)
Value change, press Zoom key to change
first layer of menus (marco off)
EV-2.0=Scene (1.0 - 1.7) 1.0 is Default AutoExposure (1.1Portrait 1.2Landscape 1.3Twilight Portrait 1.4Twilight Landscape 1.5Sports 1.6Beach/Snow 1.7Document
EV-1.7=Contrast (1.1 - 2.7)
EV-1.3=ISO (1.0 - 2.3) 1.0 is AUTO SlowShutter (1.0 -4.0) 1/20' to 2' (can be changed with ISO together)
EV-1.0=Manual Shutter Speed (1.0 - 4.0) 1.0 is AUTO Day(1/5000 - 1/6) Night(1/5 - unknow)
EV-0.7=Focus setting (1.0 -1.5) (1.0 marco mode 1.1 normal mode 1.2 full range 1.3 Fast mode 1.4 Fast mode and full range 1.5 Macro mode) default 1.0
EV-0.3=linear zoom (1.0 - 4.0)
EV 0.0=original EV (1.0 -3.5) (can be changed with Manual Shutter Speed together)
EV+0.3=Manual Focus (1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0),
EV+0.7=Manual WB
EV+1.0=Manual effect
EV+1.3=Hue (1.1 - 4.0)
EV+1.7=CC(green to red) (1.0 - 4.0), (00~7F)green (ff~80)red
EV+2.0=CC(yellow to blue) (1.0 - 4.0), (00~7F)yellow (ff~80)blue
second layer of menus (marco on)
EV-2.0=Brightness (1.0 - 2.5)
EV-1.7=Contrast (1.1 - 2.7)
EV-1.3=Sharpening (1.1 - 2.7)
EV-1.0=Saturation (1.1 - 4.0)
EV-0.7=Focus setting (1.0 -1.5) (1.0 marco mode 1.1 normal mode 1.2 full range 1.3 Fast mode 1.4 Fast mode and full range 1.5 Macro mode) default 1.0
EV-0.3=linear zoom (1.0 - 4.0)
EV 0.0=original EV (1.0 -3.5) (can be changed with Manual Shutter Speed together)
EV+0.3=Manual Focus (1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0),
EV+0.7=Manual WB
EV+1.0=Manual effect
EV+1.3=Spot (1.0 - 1.7) 1.0 is Default, 1.1 SPOT, Others unknow
EV+1.7=mirroring (1.0 - 1.3) (1.0 Horizontal mirroring 1.1 Horizontal mirroring 1.2 Vertical mirroring 1.3 Vertical mirroring)
EV+2.0=SlowShutter (1.0 - 4.0) 1/20' to 2' (can be changed with ISO together).
--------------------------------------------------------------------------------------------
Posted by leetiran
@Raiderski:
One idea
focus function when macro on
1.0 auto macro 1.1 infinit 1.2~4.0 manual focus
Another idea
add a Hybrid mode
2 Shooting Modes:
Picture Quality NORMAL:
Standard Mode-operation is same as the original standard camdriver
maybe its better to set a operation in this mode in configtool:
night on =ENM or normal night
Picture Quality FINE:
Super Mode (EV0 is focus)
I modded a Hybrid version of raider6.6
http://www.mediafire.com/?atk8xlclemw
[ This Message was edited by: leetiran on 2007-12-02 02:34 ]
Posted by Raiderski
krzychu & leetiran
focus under macro - we know this from Kriomag/Sarmad/other drivers and this is good enough solution for me
aabg
no contrast? function at EV +2.0 doesn't work?
Posted by SonarikK510
Somebody can explain to me, that does this parameter
cam_ss_retries=7 (9 or 0d) ;
Thanks, guys, respect.
Posted by SonarikK510
In the driver ¬550 I wish to make so: after what activation or effect, it would be possible to edit for example, value ISO keys of an exposition, and at switching-off of an exposition, all would remain on former places. Whether it is possible so to make?
Posted by wickedsick
On 2007-12-01 19:59:51, tommymar wrote:
Hi all.
First of all, thanks raiderski for your new driver. I've tried it and it is very good. However, since I have sticked with lpachuong's driver for a long time so I have just modded your driver in lpachuong's way and I would like to share it to everyone:
http://www.mediafire.com/?9yuezlpjlgm
It is an upgrade of raiderski's driver with:
- Added correcting flicker
- EM is always on
- New compression method (95%) (Raiderski, could you please have a look at it)
- Corrected colour for LED at night
Give it trial and you may see the different.
Hope you all enjoy.
Thanks to Raiderski and Lpachuong.
[ This Message was edited by: tommymar on 2007-12-01 19:04 ]
Thanks buddy for your efforts. I have tried it and it is really good (good colous and fast). I have been using lpachuong's drivers for a long time and I'm waiting for his new driver (i haven't seen him for ages). What i found interesting in ur driver is the compression. The camera hasn't crashed at 95% compression but there are some pictures whose sizes are about 350kb (look like it is at 75%). Why does this happen? Cheer.
Posted by aabg
@raiderski
well i change it to EV+1.3 but no, doesnt work, at least i dont see diference in the pictures
Posted by Tuner
@Raiderski:
For my phone (CID49 brown, R1DB001 - I can't save zoomed photos at 2mpx) is the best solution here:
non-macro mode: zoom = manual focus, ev=ev, possibility to have vhole focus range);
macro mode: ev = changing functions, zoom = focus in 0.0 + changing values of functions, focusing in vhole range.
I don't see vhole focusing range as disadvantage, sometimes it is difficult to recognize if macro should be switched on or off so I don't have to care about it...
Posted by Randolph
Could please one of you post some camera shutter sound of W800 or W810? I cannot find it available for download.
Thanks, Randolph
Posted by tommymar
On 2007-12-02 17:07:05, wickedsick wrote:
On 2007-12-01 19:59:51, tommymar wrote:
Hi all.
First of all, thanks raiderski for your new driver. I've tried it and it is very good. However, since I have sticked with lpachuong's driver for a long time so I have just modded your driver in lpachuong's way and I would like to share it to everyone:
http://www.mediafire.com/?9yuezlpjlgm
It is an upgrade of raiderski's driver with:
- Added correcting flicker
- EM is always on
- New compression method (95%) (Raiderski, could you please have a look at it)
- Corrected colour for LED at night
Give it trial and you may see the different.
Hope you all enjoy.
Thanks to Raiderski and Lpachuong.
[ This Message was edited by: tommymar on 2007-12-01 19:04 ]
Thanks buddy for your efforts. I have tried it and it is really good (good colous and fast). I have been using lpachuong's drivers for a long time and I'm waiting for his new driver (i haven't seen him for ages). What i found interesting in ur driver is the compression. The camera hasn't crashed at 95% compression but there are some pictures whose sizes are about 350kb (look like it is at 75%). Why does this happen? Cheer.
You are welcome. Actually the code for the compression is from Lpachuong's last driver which wasn't updated on camdrivers.wz.cz (I dont know why). At first, I sometimes I got crashes but I found that if I reduce the max/avg size a little bit then there will be no crash. The colour correction for LED is from his driver as well. I just mixed Raiderski's main frame and Lpachuong's code for the other stuffs and change the position of functions as his previous drivers. I think if it is fine then we can call it A4A 10.6
.
Posted by wickedsick
@tommymar:
Thank you for your answer. I really like your modded driver. Keep working.
Posted by Randolph
Thank you raiderski for your new driver...
I just added effects like sepia and more and it works fine also in config tool.
But one question: What compression do you think will help for better pictures? 85% or 90% or 95% ?? My CID49 K750i with CID 36 cam manages all - I mostly shoot landscapes and city scenes...
regards,
Randolph