Posted by markztrance
@ sombra:
is the way of flashing k750i cid 49 in xs++ 3.0 the same as the previous version of xs??
Posted by cronos555
On 2007-11-14 15:58:19, bravemenrun wrote:
Please help:
Did I get it right? IS IT POSSIBLE TO CONTROL ISO IN RELATIONSHIP TO SHUTTE SPEED WITH LEETIRANS MOD OF RAIDERSKI 6.6? That would be awesome! I've been waiting for this for ages! Well, at least for some time.
How do I set the ISO? Because when opening the driver with the config tool, theres no ISO setting... it's just like the original Raiderski driver...
Please help!
And THANKS to all you modding people!
yes it is, i already posted about this. to set ISO, you basically tweak EV, which by default in Raider's driver is at +0.3. so after launching camera, set your d-pad to +0.3, then use the zoom keys and set to 2.0, this gives ISO 80 on w810. so on the w810, 2.0=ISO80, 2.1=ISO100, 2.2=ISO125, 2.3=ISO160, 2.4=ISO200, ... 2.7=ISO400. i don't use anything higher than ISO 400. note, for the ISO to work well, also adjust shutter speed accordingly. shutter is at +0.7. look at the shutter speed chart in the readme file included in Raider's driver. make sure you tap the shutter button to enable SSP (shutter speed preview) so you can see in realtime your ISO and shutter settings on the picture. it's pretty sweet
this only works with leetiran's mod of Raider's driver.
Posted by bravemenrun
Great!
I changed the order of settings with the config tool, does the ISO setting
remain at the place where EV is originally? Because I moved it to +07
Is there preview for ISO? Or can I see the result only with shutter speed preview?
Posted by cronos555
On 2007-11-14 17:35:03, bravemenrun wrote:
Great!
I changed the order of settings with the config tool, does the ISO setting
remain at the place where EV is originally? Because I moved it to +07
Is there preview for ISO? Or can I see the result only with shutter speed preview?
i haven't tried re-arranging the order with the config tool, but in theory it should still work. whatever you set EV at, that's what you need to change to adjust ISO. yes you can see the effect of changing ISO after you enable SSP.
Posted by bravemenrun
Thanks, it works just fine!
Another question and sorry if bothering you (I'm quite newbie)
About sharpness: Does a higher value more sharp images or a smaller value?
And another question: Why is shutter speed restricted to 4 seconds? I'd like to take long time exposure photos of cars rolling by and such, therefore I'd need shutter speeds up to 10 or more seconds... isn't that possible? I thought lpuachuongs A4A had longer possible shutter times
[ This Message was edited by: bravemenrun on 2007-11-14 16:57 ]
Posted by Raiderski
sorry guys i'm totally out of free time
quick answers:
bravemenrun
bigger values should be sharper. for K750/W800/W810 max good value is 6, sometimes 5
679
you can play with value [i]SHUTTER_SPEED[i] (decrease this value: 3f,3e,3d,3c,3b,3a,39,38,...)
moonmoth
nope, 21.92 is only modded 21.91 by Kriomag where MXE-60 was out of sync (because of too high jpeg quality during compression)
by the way...
On 2007-11-03 01:51:23, cronos555 wrote:
... i manually set shutter to 1/13s and i manually set EV to zoom 2.0. look at the results of series of shots below ... each increase of EV resulted in an increase in ISO. did this many times. same result each time. i think we have found how to control ISO!
Setting EV anything lower than 2.0, resulted in ISO 80 shot since the w810 can't set ISO lower than 80.
shot 1: shutter 1/13s, EV 2.0 = ISO 80
shot 2: shutter 1/13s, EV 2.1 = ISO 100
shot 3: shutter 1/13s, EV 2.2 = ISO 125
shot 4: shutter 1/13s, EV 2.3 = ISO 160
shot 5: shutter 1/13s, EV 2.4 = ISO 200
shot 6: shutter 1/13s, EV 2.5 = ISO 160 - my error went down instead of up
shot 7: shutter 1/13s, EV 2.6 = ISO 320
shot 8: shutter 1/13s, EV 2.7 = ISO 400
shot 9: shutter 1/13s, EV 2.8 = ISO 500
in fact yes, we can say about this "ISO control". we can consider this in pure logical way:
if we lock shutter speed (exposure time) at selected time then we can not change (increase) exposure time for more "brightness" (more light on sensor). so the only way is to increase ISO for more light - this is very respectable behaviour of the camera
with leetiran mod:
- we are able to lock shutter speed at ISO100
- achieve exactly this exposure value which we want (manual shutter speed)
with cronos555 idea and leetiran mod:
- we are able to lock shutter speed at any ISO value
- achieve exactly this exposure value which we want (manual shutter speed)
unfortunatly to control ISO you have to first lock shutter speed (EV+0.7) at any value and then change exposure compensation (EV+0.3). maybe if i'll find easier control then 6.7 will be released
cheers
_________________
W800 CID36 R1BD001
www.tinyurl.com/2c3quo (gallery)
www.tinyurl.com/ysc2wm (driver + config tool)
[ This Message was edited by: Raiderski on 2007-11-14 17:14 ]
Posted by Raiderski
bravemenrun
shutter speed is limited to max 2 seconds only because higher value will crash K750/W800. W810 isn't crash affected but probably 2 seconds are still max value for our phones. total exposure time can be sometimes higher than 2 sec. (in EXIF "2 sec." is visible) but i don't know why
Posted by bravemenrun
Thanks for your replies raiderski,
I own a w810i, can you tell me how I need to change your driver to obtain
more than only 2 seconds shutter speed? That would be fantastic.
Posted by Sombra
@markztrance
Yes, is the same.
Posted by Randolph
@all: how can I find out what driver was used for taking a photo with the K750i? I have several pictures with extraordinary quality, but at least we do not know what driver was used some months ago... Any idea thar could help???
kind regards,
Randolph
Posted by Sombra
@Randolph
All digital cameras and some camera phones save images with Exif file, which possess advanced informations over photo taked.
Many programs this can be see in properties of image, but also is possible open this informations in file properties of Windows/Linux.
See below the Exif informations with PhotoFiltre software:
In Software field you can know the version of camdriver used, for K750i, observe last digits, in this case, correspond to Strong's SuperFunction 5.6.
Sorry for my poor english.
Posted by pram_zx
@Raiderski
I hope, there's will be a Raiderski 6.7,and surely with the new config tools.
6.6 still the best driver for me.
Cheer's
Posted by Milu
@Sombra.
I test your method to install camdriver after FS before Main but the results fail me. I meat that quality of picture isnt bette than any other methods.
So i think that method is good but not for everyone
Posted by markztrance
hello to everyone..
these photos are taken with my k750i R1BC001 with chengrong 8.53.
notice i use the AEL (auomatic exposure lock) coz it helps me a lot in controlling the light of my pics.
..but i hope someone can help me bcoz im not satisfied with this version bcoz of its dull sharpness and many bugs swarming on this cam driver.
BTW what cam driver is best recommended by most in a k750i RIBC001??
Posted by SPU
Raiderski
"shutter speed is limited to max 2 seconds only because higher value will crash K750/W800."
I have W800 and can take a shots with total exposure up to 6 seconds without a crash (with my driver).
For example: ISO 100, exposure time about 6 seconds (and about 30 seconds to get a final picture).
You can see the pale Great Bear (or Big Dipper) constellation (above the tree).
Posted by bravemenrun
Oh man I want that too!
SPU, or anyone else, can you tell me how to mod Raiderski's driver 6.6 to get more than only 2 secs shutter speed?
Posted by cronos555
On 2007-11-15 21:41:36, bravemenrun wrote:
Oh man I want that too!
SPU, or anyone else, can you tell me how to mod Raiderski's driver 6.6 to get more than only 2 secs shutter speed?
as told to me by Raiderski:
"find #SS_VERIFY (2 occurences) and comment this with // that's all"
i've tried it out and it works fine. it is possible to get longer than 2s exposure, but EXIF will still display 2s.
@SPU
welcome back
[ This Message was edited by: cronos555 on 2007-11-15 21:39 ]
Posted by Raiderski
"find #SS_VERIFY (2 occurences) and comment this with // that's all"
at least you can try that but then try stability: enable night mode and set manual shutter at 3.1
SPU
i know, i wrote also: "total exposure time can be sometimes higher than 2 secs". i mean "2 sec" as a parameter only for command 04 because when night mode is enabled and value 29 is used then i have beautiful phone crash
_________________
W800 CID36 R1BD001
www.tinyurl.com/2c3quo (gallery)
www.tinyurl.com/ysc2wm (driver + config tool)
[ This Message was edited by: Raiderski on 2007-11-15 21:59 ]
Posted by leetiran
mod for fun
1. Hybrid version of raider6.6(moded from raider6.6) :
2 Shooting Modes:
Picture Quality NORMAL:
Standard Mode-operation is same as the original standard camdriver, night on =ENM
Picture Quality FINE:
Super Mode
http://www.mediafire.com/?atk8xlclemw
2. Menu superfunction camdriver(based on Sarmad_5.8, some codes from raider6.6) :
Effects menu for superfunction：
Off for Normal,;
B&W for SCENE, zoom(+/-) to change;
Negative for ISO, zoom(+/-) to change;
Sepia for Effects, zoom(+/-) to change;
Solarize for Shutter speed & EM(ENM) , zoom(+/-) to change.
Macro on:
zoom(+/-) 1.0 autoMacro, 1.1 infinity, 1.2 - 4.0 manual
Picture Quality FINE for spot on, Picture Quality NORMAL for spot off;JPEG levle is 91% in both fine & normal mode
http://www.mediafire.com/?8yleymtkg3z
The detailed instruction in readme.txt.
have fun!
[ This Message was edited by: leetiran on 2007-11-19 08:43 ]
Posted by Sombra
@Milu:
Unfortunatelly, now we know which the sun "not bright for all" in this case.
Now, three photos taked yesterday:
Ambiental Crime (fire placed on ecologycal reserved area)
Ambiental Crime (consequences)
Location: Side of Zero Mark of Equator Line monument
Good bye and sorry for my poor english.
Posted by Milu
@Sombra
I agree with you. I thinking about where is the point. Do you know where is the difference. I'll try with R1BC002 soft.
Posted by Raiderski
notice that you guys have different cam modules: Milu (new, average quality), Sombra (old, good quality)
Posted by Milu
Y wrote nothing new. i know about it
Posted by Sombra
@Milu
After read post of Raiderski, perhaps which this procedure only improve photo quality in phones CID49 with old camera module.
Please, sorry for make you lose time with this.
Posted by don_gori
Hi my friends
I made some night shots with SuperFunction(installed with Sombra method )
I'm very happy with my phone it makes superb pics
Thank u all cam modders and specially to Sombra
Best wishes
Posted by dukempg
@all
It seems that cronos555 idea for ISO Control doesn`t work on my k750@W800 CID36 R1BC002 phone. After locking shutter speed, ISO won't go higher than 240 with Night mode or 400 in Normal mode. Can anyone confirm this?
Posted by Sombra
@don_gori
Wow! Nicest pictures don_gori, really beautiful images.
I'm happy for help you.
Cheers and sorry for my poor english.
Posted by Mr.Kája
leetiran: I have just added your mods on page. I hope, you won't be angry:)
Anyway, I'm not watching situation at camdrivers as well as before, but now, I think, there are almost no new camdrivers. What is funny, one week ago, I had to reinstall my PC and I have losted all data, so I had to download all the page, including camdrivers..like a looser:p
Posted by leetiran
On 2007-11-18 04:37:32, Mr.Kája wrote:
leetiran: I have just added your mods on page. I hope, you won't be angry:)
Anyway, I'm not watching situation at camdrivers as well as before, but now, I think, there are almost no new camdrivers. What is funny, one week ago, I had to reinstall my PC and I have losted all data, so I had to download all the page, including camdrivers..like a looser:p
Thanks a lot!!!
Posted by tommymar
On 2007-11-17 23:06:41, don_gori wrote:
Hi my friends
I made some night shots with SuperFunction(installed with Sombra method )
I'm very happy with my phone it makes superb pics
Thank u all cam modders and specially to Sombra
Best wishes
with which camdriver did you use?
Posted by don_gori
@tommymar i used Strong's SuperFunction 5.6 driver uploaded by SOMBRA'S METHOD
Posted by Vipera ammodytes
strong 5.6
EM
manual shuter speed
Posted by w750i_cid_49
hi
can anybody translate SOMBRA's GUIDE FOR INSTALL in russian?
i dont now english so good to understnand what he say...
Posted by w750i_cid_49
anybody hear me???????????????
Posted by Chirantha
The download links are dead
Posted by pikszel
On 2007-11-18 19:26:38, w750i_cid_49 wrote:
anybody hear me???????????????
НАПРАВЛЯЮЩИЙ ВЫСТУП SOMBRA's ДЛЯ УСТАНАВЛИВАЕТ CAMDRIVER И ПОЛУЧАЕТ БОЛЬШЕ КАЧЕСТВА
1 - Вместо camdriver upload к телефону использующ только метод FSX, сперва блесните желательный архив fs использующ XS++ v3.0 бета (используемый вариант незначительн, если funcional, но 3.0 или высокие раскрывают исследователь нового окна для FSX, то удлиняющ pricipal поверхность стыка программы).
2 - Поже fs блеснули, что, процедура с режимом FSX upload camdriver нормальн и установила в телефон.
3 - Последним шагом будет вспышка процедуры в главном архиве firmware такого же варианта архив fs (очевидный) и окончательно, смогите повернуть телефон НА. После поверните ДАЛЬШЕ, мобильный телефон пойдите экран выставки первого вообще начинания (с штангой нагрузки подобной к установке оперативной системы). Я не знаю причину для разницы в фотоих, но моим мнением соединено точно с этим "вообще начинанием", но будет только supposition.
From BabelFish translator
Posted by paparazy
Ajudar para alteração de drivers em Português!
Topic forum: http://www.esato.com/board/viewtopic.php?topic=147234&start=0
// lembre valores em hexdecimal 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 0a, 0b, 0c, 0d, 0e, 0f, 10....
//************************************************
// Exposure property 0 *******(THis is the exposure setting taken from the W900)
//************************************************
// 0 => -3 EV, 1=> -(2 2/3) EV .... 15=> 2 EV
//---------------------------------------------------
seq_set_prop_0=$s0 %0 $-0 09 $b0 00 5 3 06 02 00 01 $w0 06 #CMD_END; // altere o 09 para 0a você diminui o ev (exposição) padrão
// Configuração Video k750
VR_NORMAL_MODE_FR=3C; // fps grav video normal
VR_NIGHT_MODE_FR=30; // fps grav video night
// Configurações iniciais k750
seq_init=
06 02 00 01 00 56 #CMD_END // fix PaParazy nivel do filtro bilinear
06 02 00 01 01 55 #CMD_END // fix paparazy contraste 1
06 02 00 01 32 57 #CMD_END // fix paparazy Hue 32
06 02 00 01 08 58 #CMD_END // fix paparazy saturação 08
05 02 00 20 fc #CMD_END // fix paparazy mudar verde para vermelho
05 02 00 21 e2 #CMD_END // fix paparazy mudar amarelo para azul
06 02 00 01 01 13 #CMD_END // fix paparazy aplicar alteração cores
// 06 02 00 01 01 08 #CMD_END // ligar spot (base de brilho ao centro)
#GET_SENSOR_VERSION;
// pre-shutter da foto só para tela
seq_set_prop_7_0=06 02 00 01 28 03 #CMD_END // Slowshutter locked at min 20 fps => 10 fps draft mode
05 02 00 08 3C #CMD_END // ((Altere 3C para 3f fica mais rapido))30fps => 15 fps, Normal mode
06 02 00 01 81 34 #CMD_END // Transition to draft mode, use each 2 frame
#WAIT_FOR_MODE_TRANSITION;
seq_set_prop_7_1=06 02 00 01 0a 03 #CMD_END // Slowshutter locked at 5 fps draft mode
05 02 00 08 1e #CMD_END // ((Altere 1e para 21 fica mais rapido))15fps, Dark mode
06 02 00 01 01 34 #CMD_END // Transition to draft mode, use every frame
#WAIT_FOR_MODE_TRANSITION;
// Shutter do video relação fps
LOCK_NORMAL_FPS= 05 02 00 08 40 #CMD_END // ALTERE AQUI o 40 para 32 fica mais lento
06 02 00 01 40 03 #CMD_END // ALTERE AQUI o 40 para 32 fica mais lento
06 02 00 01 81 34 #CMD_END
#WAIT_FOR_MODE_TRANSITION;
// Redução shutter para noite k750 isso faz redução do ruido anoite!
SM_NEW_ENHANCE_NIGHT_MODE= $p1 07
$c1 01
$p1 0d
$c1 00
//--------------------------------------------------------------------------------
$p1 0e //|
$c1 00 //|
05 01 00 23 01 $f $r2 1 1 //|
$m0 1 $/0 28 //|
$c0 00 //|
$m0 1 $/0 03 //|
$c0 00 //|
$cl //|>--- ENM
$s0 40 $-0 r1 //|
06 02 00 01 04 51 $f $d0005 //|
06 02 00 01 $w0 04 $f $d0005 //|
$cx //|
$cx //|
$cx //|
//--------------------------------------------------------------------------------
$cl
//--------------------------------------------------------------------------------
05 01 00 23 01 $f $r2 1 1 //|
$m0 1 $/0 28 //|
$c0 00 //|
$m0 1 $/0 03 //|
$c0 00 //|
$cl //|>--- LED ENM
$s0 3d $-0 r1 //|
06 02 00 01 04 51 #CMD_END //|
06 02 00 01 $w0 04 #CMD_END //|
$cx //|
$cx //|
//--------------------------------------------------------------------------------
$cx
$cx;
seq_ss_take= $c7 00 // If take flag is zero...
$s7 01 // ...then set take flag to one and perform the code below
#EMPTY_EVENT_FIFO $z0 $-0 re $c0 00 $cl //Don't do anything if we already have the right size (for burst mode)
$p0 0d $c0 01 $p0 01 $c0 00 #LED_WB_SET $cx $cx #SM_NEW_ENHANCE_NIGHT_MODE 06 02 00 01 01 $ze
$ce 09 33 $cl 32 $cx $f #WAIT_FOR_MODE_TRANSITION #WAIT_FOR_CAPT_START $cx $t0020
// Ajuda avançada
#######HELP table i2c_commands advanced ##########
IMPORTANT:
------------------------------------------------------------------------------
This commands only for K750/W800/W810 phones!!!
In another phones - another commands and registers!!!
For more information visit:
http://www.sony-ericsson.ru/forums2/index.php or http://www.senews.ru/forum/index.php
------------------------------------------------------------------------------
Compiled by Andeo
------------------------------------------------------------------------------
***REGISTER DEFINITIONS***
**************************
------------------------------------------------------------------------------
Internal register 0,1,2,3 Used as temporary storage only
Internal register a Used to select EXIF parameter to read
Internal register e Used to remember last size id for snapshot burst mode
Internal register f Used to store property value
------------------------------------------------------------------------------
***COMMENTS***
**************
------------------------------------------------------------------------------
//COMMENTS COMMENTS - any your comments
------------------------------------------------------------------------------
***MACROS***
************
------------------------------------------------------------------------------
#MACROS PERFORM a macros. "MACROS" is any name of your macros. Place your macros at the beginning.
------------------------------------------------------------------------------
***COMPATION***
***************
------------------------------------------------------------------------------
$cX YY Check IF value of register "X" equal value "YY" THEN do next commands
.....
$cl ELSE do next commands
.....
$cx END IF (for $cX command)
------------------------------------------------------------------------------
***BASIC COMMANDS***
********************
------------------------------------------------------------------------------
$sX YY SET property "X" value "YY" for example:
$s5 40 PLACE value "64" in reg "5"
------------------------------------------------------------------------------
$sX %0 PLACE value in reg "X"
------------------------------------------------------------------------------
$mX YY COPY reg "YY" into reg "X"
------------------------------------------------------------------------------
$dXXXX WAIT(delay) for "XXXX" time in Hex (for example $d0100=Wait for 256 ms)
------------------------------------------------------------------------------
$wX WRITE the byte stored in register 0x0X (or simple reg "X") to the I2C bus
------------------------------------------------------------------------------
$rX READ the byte stored in register 0x0X (or simple reg "X") from the I2C bus
------------------------------------------------------------------------------
$bX OPERATE on register 0x0X (or simple reg "X")
------------------------------------------------------------------------------
$zX SET register "X" to last set size config
------------------------------------------------------------------------------
$pX YY SET register "X" to current value of property "YY"
------------------------------------------------------------------------------
$uXX UPDATE property "XX"
------------------------------------------------------------------------------
!0, !1, !2... TAKE A PARAMETER (one, two or three) holding the data to be written
------------------------------------------------------------------------------
$b3 YY Z 1 WRITE 0xYY (or simple "YY") to the "Z-th" bit in internal register 3. For example:
$b3 01 5 1 WRITE 0x01 to the fifth bit in internal register 3
------------------------------------------------------------------------------
$b2 XX Y 1 WRITE "Y" to bit "0" in register "2"
$b2 00 3 1 WRITE "3" to bit "0"
------------------------------------------------------------------------------
***ARITHMETIC***
****************
------------------------------------------------------------------------------
$
$>X 1 SHIFT the bits in register 0x0X (or simple reg "X") 1 bit to the right
------------------------------------------------------------------------------
$*X YY MULTIPLY reg "X" by "YY"
$*X rY MULTIPLY reg "X" by reg "Y"
------------------------------------------------------------------------------
$/X YY DIVIDE reg "X" with "YY"
$/X rY DIVIDE reg "X" with reg "Y"
------------------------------------------------------------------------------
$-X YY SUBSTRACT "YY" from reg "X"
$-X rY SUBSTRACT reg "Y" from reg "X"
------------------------------------------------------------------------------
$+X YY ADD "YY" to reg "X"
$+X rY ADD reg "Y" to reg "X"
-------------------------------------------------------------
[ This Message was edited by: paparazy on 2007-11-19 15:22 ]
Posted by w750i_cid_49
thanks
one man nave help me tomorrow
but i dont understand what is FSX metod...
Posted by Randolph
On 2007-11-17 20:28:48, Sombra wrote:
[After read post of Raiderski, perhaps which this procedure only improve photo quality in phones CID49 with old camera module.
Hi Sombra, you have a CID49 K750i with a CID36 camera-module?? Just to be sure, before I start to reinstall raider´s 6.6 camdriver again...
regards,
Randolph
Posted by metallica1
Driver Strong Super Function 5.6
For my w810i@R4EA031, this is the best CamDriver, in my opinion, it is logical
Posted by strong
Nice pics gentlemen
the amazing at this driver is the sharpness do you agree with me?
Posted by Vipera ammodytes
strong great driver
night pictures that i posted is not so sharp, i have shaky hands
i will post daylight pictures soon,they are great
Posted by metallica1
Exactly Strong, the sharpness of your driver is really good, but it is not alone that, the control of the driver's ilumination is perfect work.
I went for beach that weekend and I photographed more than 350 pictures, and all pictures they were amazing!
tomorrow I will post more pictures.
Thank you!
and sorry my English.
Posted by leetiran
@all moders
There are many blanks in the chengrong's periodic table of camdriver instruction, but now many of them seem already be known. Would you please fill them?
Posted by pram_zx
@metallica1
what sharpnes do you use? 4,5,6 ?
when usin strong camdriver, my phone always hang and start blinking when I quickly turn on the camera and go to +2.0(I change this for profile)then start to press the zoom button, and here you go...the blinking will start and my phone got crash ! (I have to remove the battery to normalize again)
Posted by Randolph
Christmas in Vienna
CID49 K750i @ CID36 cam-module driver:raider 6.6
[ This Message was edited by: Randolph on 2007-11-20 09:28 ]
Posted by mursay
Can anybody translate SOMBRA's GUIDE FOR INSTALL in Turkish?
i dont now english so good to understnand what he say. Pls.
Posted by Sombra
@Randolph
Sorry, but i not have certainty of my camera module version, who affirm this is Raiderski, but i agree with he which image quality im photos taked using my phone appear better if compared with others K750i CID49.
In truth, original firmware installed on my mobile are too old (R1AA008) and perhaps have any chance of old camera module be used on fabrication process.
Sorry for my poor english.
Posted by Randolph
@ sombra: I am not sure, but perhaps Sony changed the quality of camera modules between CID36 and CID49. So you may have a "good quality" and camera module. Lucky one... If everything works, keep this firmware...
kind regards,
Randolph
[ This Message was edited by: Randolph on 2007-11-20 13:10 ]
Posted by Sombra
I agree with metallica1 over auto ilumination control, in this factor Strong's camdriver is really fast and perfect. Sharpness also is one of the best, in my opinion.
_________________
K750i CID49 (R1BC002) - Strong's SuperFunction 5.6 Camdriver + Sombra's Upload Method
[ This Message was edited by: Sombra on 2007-11-20 13:38 ]