Posted by Raiderski
And if you expect new people to post about those damn drivers
nobody begs you for this. "damn drivers" - they are someone's work, so cool down a bit
FIX IT!!!
are we your slaves?
You expect us to say something about these drivers when in fact I can't download them in the first place?
as i wrote earlier nobody begs you for this
www.camdrivers.wz.cz/
_________________
W800 CID36 R1BD001
http://www.tinyurl.com/2c3quo (gallery)
http://www.tinyurl.com/ysc2wm (driver + config tool)
[ This Message was edited by: Raiderski on 2007-11-08 10:12 ]
Posted by number1
can any1 give me some help, i'm trying to mod the k800i camdriver so when with flash it doesn't give noise in the dark spots, could some1 recommend a iso and shutterspeed thanks
Posted by Sombra
ATTENTION CID49 PHONE USERS
I discover one difference in two methods of install camdriver which can influence in the quality of shots taked after, in the moment i making more some tests for after post the experience with samples, wait some hours.
Forwarding, can say which have gain in sharpness and notable reduction on noise.
Sorry for my poor english.
_________________
K750i CID49 (R1BC002) - Strong's SuperFunction 5.6
[ This Message was edited by: Sombra on 2007-11-08 13:20 ]
Posted by Sombra
Hello everyone, now my tiny experience with camdriver install modes:
Incidentally, I discover which the final result updating camdrivers using different methods can influence photos taked after, expect no to be mistaken. See below my discover:
Generally, I upload camdrivers for phone using FSX method in XS++, before in v1.2 and now in v3.0 Beta, since only in this versions support correctly my K750i CID49.
Occur which I ever as used R1CA021 firmware in my phone, but in one opportunity decide change for older R1BC002 and in this occasion I perceived gain in image quality which in the first moment attribute to firmware version, but now know the real motive.
SOMBRA's GUIDE FOR INSTALL CAMDRIVER AND OBTAIN MORE QUALITY
1 - Instead of upload camdriver to phone using only FSX method, first flash the FS file desired using XS++ v3.0 Beta (version used is insignificant, if funcional, but 3.0 or higher open a new window explorer for FSX, extending pricipal interface of program).
2 - After of FS flashed, procedure with FSX mode to upload camdriver normally and install in phone.
3 - The last step is procedure flash in main firmware file of same version which FS file (obvious) and finally, can turn phone ON.
After turn ON, the mobile phone go show screen of first general initialization (with loading bar similar to installation of an operating system).
I don’t know the reason for difference in photos, but my opinion is linked precisely with this “general initialization”, but is only a supposition.
Let’s go to more important, comparison between samples:
Observation: camdriver used for all photos is Strong's SuperFunction 5.6 in K750i CID49 (R1BC002).
Photos with camdriver upload using only FSX on XS++ software:
Observe eletric wire in right on the image, almost imperceptible.
Now, photos taked after Sombra's Guide:
Now, eletric wire is perceptible at long distance
This possibly is my last post with image comparisons on forum, now i choose definitive camdriver for use and this method consume much free time.
Users, please, test this using preferred camdriver and return to post your comments.
WARNING: Backup all important data existent in mobile phone!
Sorry for my poor english.
_________________
K750i CID49 (R1BC002) - Strong's SuperFunction 5.6 Camdriver
[ This Message was edited by: Sombra on 2007-11-13 20:51 ]
Posted by leetiran
@Somba
I don’t know the reason for difference in photos, but my opinion is linked precisely with this “general initialization”, but is only a supposition.
If we choose the menu "Master reset-Reset all" after only updating camdriver0.dat, can we get the same result?
[ This Message was edited by: leetiran on 2007-11-09 08:47 ]
Posted by Milu
@Somba.
Very interesting think and U have a beer for it, bou i think u.ve got two similar photos to make test truly.
Oh. and one more thing. What about patch to move drivers to other
_________________
camdrivers.lua.pl Everything about camdrivers.
[ This Message was edited by: Milu on 2007-11-09 08:50 ]
Posted by gedas5
@ Somba
i really doubt if anyone nowadays is still using the old Bruteforce method to install camdrivers or acoustics...everyone is using FAR or patches to do so...which means that after using those methods our phones do not initialiase after flashing..so maybe reset would give the same result? how do you guys reckon?
Posted by Sombra
@leetiran and gedas5:
I also reflect over this possibility (Master Reset), but not try because only remember in mid of atualization process and how not tested, prefer to omit in "guide". But...
I imagine which Master Reset not cause the same result on camera, because i think which this have link with the fact of changes in FS file after installation.
Any form, this to serve how more one test for the users.
@Milu:
Ok, really, comparison between two similars photos is more interesting and i put some samples later.
Over the patch "move drivers to other", this also need change FS file (read above for details), but can't reply this question.
Sorry for my poor english
_________________
K750i CID49 (R1BC002) - Strong's SuperFunction 5.6
[ This Message was edited by: Sombra on 2007-11-09 14:54 ]
Posted by Sombra
Ok my friends, attending request, below three samples for comparison.
Shots taked at similar daytime for best comparison.
Shot with camdriver upload using only SFX on XS++ Software
Shot with camdriver upload using "Sombra's method"
=======================================
Shot with camdriver upload using only SFX on XS++ Software
Shot with camdriver upload using "Sombra's method"
=======================================
Shot with camdriver upload using only SFX on XS++ Software
Shot with camdriver upload using "Sombra's method"
Unfortunatelly, daytime is similar, but sunlight condition in both cases are different, but I affirm which clarity in older photos also are good and after darkened when shot taked.
Sorry for my poor english.
_________________
K750i CID49 (R1BC002) - Strong's SuperFunction 5.6 Camdriver
[ This Message was edited by: Sombra on 2007-11-09 14:45 ]
Posted by Milu
Yes @Sombra Yoru're right. Photos are so different. But i think then we cant aplly patch to move drivers to other... so its good way for people whois always using one camdriver, but i think i can do that
Posted by surconfluge
could somebody help me out plzzzzzzz! i cant zoom on big pictures! and the video time is like 9 seconds! my old k750 i could zoom and video as much as i wanted ! it fell into the water .. and i got another k750.. this new one i cant zoom and the shots are like electric .. too fuzzy .. plz could some1 give me complete details on how to fix the problem!
Posted by don_gori
Hello friends
Today I made one small test between SE K750(A4A 9.3) and NOKIA's 3mp 7390
There are only 3 pics but as soon as posible I'll make more photos with these phones
LOOK at this SE fanz
http://geromessi.data.bg/K750%20vs.%20Nokia%207390.rar
Sorry for my bad english and
best wishes ot everyone
Posted by leetiran
On 2007-11-09 18:10:39, surconfluge wrote:
could somebody help me out plzzzzzzz! i cant zoom on big pictures! and the video time is like 9 seconds! my old k750 i could zoom and video as much as i wanted ! it fell into the water .. and i got another k750.. this new one i cant zoom and the shots are like electric .. too fuzzy .. plz could some1 give me complete details on how to fix the problem!
The video time can be long if you select the menu "settings-shoot mode-high quality video".
The new k750 cant zoom on biggest picture. The problem seems can be solved by updating the camdriver, such as chengrong v8.54 on the first page or other drivers in http://www.camdrivers.wz.cz/.
sorry for my poor english
Posted by surconfluge
ok thx abt the video thingy ! but i donno how to use the driver.. how to install it on the cell or upload it... if u do .. could u help me out step by step procedure?! thx in advance
Posted by leetiran
On 2007-11-10 10:04:20, surconfluge wrote:
ok thx abt the video thingy ! but i donno how to use the driver.. how to install it on the cell or upload it... if u do .. could u help me out step by step procedure?! thx in advance
its complicated to tell u how to upload it. You must know sth about Far, Xs++ or vkp patch which can be found in the forum. the easiest way may be using vkp patch to chang the camdriver catalogue to phone memory.
Posted by surconfluge
hey could u add me on msn , it s surconfluge@msn.com.. i d really appreciate u giving me some pointers on how exactly to upload it .. coz it s driving me nuts and i really could use all the help i can get ! thks
Posted by moonmoth
Hi! Wich camdriver is better to use with MXE-60? Because my photos with strong+flash is so dark that I cant see a thing on them. Thanks!
Posted by Raiderski
my driver has full support for MXE-60
Posted by don_gori
Hello friends,today i made some shots in my favourite season WINTER
nice
Sombra your discovery about instaling cam drivers is very INTERESTING
I'm using R1CA021 firmware and phone makes superb pics
Do u make some test between K750's R1CA021 and W800's R1BC002
to tell me which firmware makes better pics
Posted by cronos555
@don_gori
awesome shots.
Posted by MRSUBHAN
Hi there,
My camera is version 8.62 but it does not zoom and also my video quality is very bad. is there anything i could do about this
thank you for reading this
Posted by vickynike23
hey wich is the best driver in wich my zoom featureand auto focus works fine!??! m not muich in2 photography n all
[ This Message was edited by: vickynike23 on 2007-11-11 17:35 ]
Posted by leetiran
On 2007-11-10 10:49:20, surconfluge wrote:
hey could u add me on msn , it s surconfluge@msn.com.. i d really appreciate u giving me some pointers on how exactly to upload it .. coz it s driving me nuts and i really could use all the help i can get ! thks
i have added u on msn, but i afraid that i cant help you because my english is too poor to tell you what to do. and there differences between k750i and k750c which i am using, so i dont know exact steps to upload it to phone k750i. I think u may ask other body who use k750i to help u. if u are Chinese, its easy for me to help u.
Posted by Randolph
Hello again ... here some pics from lst weekend (raider 6.6 on K750i R1DB001 CID49 @ cam-module CID36)
early winter and changing weather - same day only hours later ...
perhaps one can see the small rainbow?
Raider 6.6 is my favorite driver at the moment...
Posted by Sombra
More some shots taked after of "my method" for upload camdriver:
Street and quiet transit
High detailed tree
Cloudy sky
Flame on thicket (EM, Spot and autofocus)
Daybreak in Enhanced Mode (back of glass)
Shots taked with K750i CID49 (R1BC002) using Strong's SuperFunction 5.6 camdriver.
@don_gori
I'm happy with this camdriver after upload using "my method" and no more make new tests, sorry.
Sorry for my poor english.
_________________
K750i CID49 (R1BC002) - Strong's SuperFunction 5.6
[ This Message was edited by: Sombra on 2007-11-12 13:25 ]
Posted by leetiran
On 2007-11-12 13:41:30, Randolph wrote:
Hello again ... here some pics from lst weekend (raider 6.6 on K750i R1DB001 CID49 @ cam-module CID36)
early winter and changing weather - same day only hours later ...
perhaps one can see the small rainbow?
Raider 6.6 is my favorite driver at the moment...
beautiful! i love Raider 6.6 too.
[ This Message was edited by: leetiran on 2007-11-13 00:32 ]
Posted by Milu
@Sombra
Your photos convinced me to your method istalling camdrivers but if u can send me or post full screen photos...
Greetings
Posted by don_gori
@Sombra yesterday i tried your method but here in Bulgaria the weather changes very quickly thats why i couldn't make test
And also when I tunred ON my phone,there was no "first general initialization" on my screen.Maybe the reason is changing K750 R1CA021 to W800 R1BC002 firmware .... don't know?
But today I'll make another test and as soon as posible I'll show you the results
@Milu if u make some test between Sombra's method and Normal method plss upload somewhere to see difference in photos on your phone
Good day to everyone
Sorry for my bad English
Posted by Sombra
@Milu
Ok, below one thumbnail for image at original size and a link for zip folder with more eight images:
Airplane
Zip folder with more samples
@don_gori:
Note which only loading bar appear on screen and after a short step-on-step for use the phone, "first general initialization" words no is showed.
Sorry for my poor english.
_________________
K750i CID49 (R1BC002) - Strong's SuperFunction 5.6 Camdriver
[ This Message was edited by: Sombra on 2007-11-12 17:02 ]
Posted by aabg
someone has tried sombra's method with a w810?
Posted by don_gori
@Sombra finally I made the test between two methods and i'm very surprised !!! Tomorrow i'll make more shots and show you
And now here is the test
http://geromessi.data.bg/Test%20Methods.rar
Best wishes to everyone
Posted by Sombra
On 2007-11-12 17:56:26, don_gori wrote:
@Sombra finally I made the test between two methods and i'm very surprised !!! Tomorrow i'll make more shots and show you
I can't download this file. Please, try other host for upload.
Until tomorrow!
Posted by don_gori
Try this
http://www.2shared.com/file/2489279/5f87925e/Test_Methods.html
Posted by Sombra
WOW, i ever have compared photos in landscape, never in near objects.
The Saint George image is very good for comparison and no doubt A4A camdriver lose for SuperFunction in both methods.
In macro image, A4A and SuperFunction (using Sombra's upload method) are winners, but normal method is a bit less sharpened on texture.
_________________
K750i CID49 (R1BC002) - Strong's SuperFunction 5.6 Camdriver
[ This Message was edited by: Sombra on 2007-11-12 22:26 ]
Posted by MRSUBHAN
which is the best camera driver for k750i cid49 red?
Posted by leetiran
On 2007-11-12 22:33:25, MRSUBHAN wrote:
which is the best camera driver for k750i cid49 red?
I love Raider6.6 because u can use the configtool to mod the driver by yourself. And the effect is also amzing.
U can find it in http://www.camdrivers.wz.cz/raider.html
[ This Message was edited by: leetiran on 2007-11-13 01:42 ]
Posted by rockygali
it sez "fail not found"
any available mirrors please?!
TIA
Posted by leetiran
On 2007-11-13 02:37:13, rockygali wrote:
it sez "fail not found"
any available mirrors please?!
TIA
try it again
Posted by Mr.Kája
It works at me, anyway, try exactly this (0.51 configtool).
And we can celebrate - page number 50)
Posted by rockygali
thanks mates!
Posted by bravemenrun
I have a question:
When modding drivers, how does the sharpness factor react, is the picture sharper when the factor is big (e.g. 7) or when it is small (e.g. 2)?
I'm using raiderskis config tool.
Thanks!
Posted by Randolph
Using Raider6.6 + configtool I have a question: I want to create some profiles for Raider6.6 like in DarkMagicien´s driver:
//Scene (1.0 -1.9) 1.0 is Default AutoExposure (1.1Portrait 1.2Landscape 1.3Twilight Portrait 1.4Twilight Landscape 1.5Sports 1.6Beach/Snow 1.7Document)
In Raider6.6 exist only document and clowdy landscape.
In DarkMagicien this code is used for scenes/profiles
SM_SCENE=$s0 %0 $-0 0a #CMD(51,$w0);
Could you please post some code or hints what to change or what settings can be used to create some useful profiles?
Kind regards,
Randolph
Posted by 679
@Raidersky
Need one feature in 21.92. Can you help?
I am satisfied pictures quality with ISO 160-200. In EM and ENM we always get ISO 100 and VERY long exposure in dark condition - result - shaking hands produce blured snaps.
If we will use ISO 200 we will get a bit more noise but will have less bluring pictures as shutter will be faster.
So, is it possible to change ISO 100 for ISO 200 in driver 21.92 in EN and ENM mode.
THX a lot...
Posted by cronos555
On 2007-11-13 15:13:07, 679 wrote:
@Raidersky
Need one feature in 21.92. Can you help?
I am satisfied pictures quality with ISO 160-200. In EM and ENM we always get ISO 100 and VERY long exposure in dark condition - result - shaking hands produce blured snaps.
If we will use ISO 200 we will get a bit more noise but will have less bluring pictures as shutter will be faster.
So, is it possible to change ISO 100 for ISO 200 in driver 21.92 in EN and ENM mode.
THX a lot...
you can try leetiran's mod of Raider's 6.6 driver:
http://www.mediafire.com/?3et2dyjblny
in which you can set ISO to anything you want and then set shutter to what you want to get your ISO 200 shot. for ISO 200, you would set EV to +2.4, and then set shutter to your liking and obtain a ISO 200 shot. this works on my w810, not sure about other phones.
Posted by Milu
@Sombra.
How u upload camdriver to phone using XS++ 3.0 because i dont know how to do it. there is no folder like files to uploador something like that.
I upload camdriver by XS++ 1.2 but i think it doesnt work corectly.
Posted by Sombra
@Milu
FSX on XS++ 3.0 open a new window explorer in the interface of program, and is very simple for use.
You can select files desireds in Windows Explorer, drag and place in FS directory on phone.
Sorry for my poor english.
Posted by vickynike23
@help
hi guys plz tgiv me a gud cam driver for my w800 r1bcoo2 plzzz i suud b able 2 use my zoom n auto focus...plz help
Posted by 679
On 2007-11-13 20:45:30, cronos555 wrote:
you can try leetiran's mod of Raider's 6.6 driver:
http://www.mediafire.com/?3et2dyjblny
in which you can set ISO to anything you want and then set shutter to what you want to get your ISO 200 shot. for ISO 200, you would set EV to +2.4, and then set shutter to your liking and obtain a ISO 200 shot. this works on my w810, not sure about other phones.
Thx, but i'm sticking to Raider 21.92 as fast (in using) and quality camdriver i ever tried.
@ Raider,
BTW i modded 21.92 so MANUAL ZOOM PREVEW with SPOT ENABLE now begins from zoom=2.4 i.e. in macro range. Its more comfortable for my far sighted eyes. So mb u'd point code for ISO in 21.92 to make some experiments?
THX
Posted by moonmoth
Hi! Raiderski, does Your mod of 21.92 support mxe-60? Thanks.
Posted by bravemenrun
Please help:
Did I get it right? IS IT POSSIBLE TO CONTROL ISO IN RELATIONSHIP TO SHUTTE SPEED WITH LEETIRANS MOD OF RAIDERSKI 6.6? That would be awesome! I've been waiting for this for ages! Well, at least for some time.
How do I set the ISO? Because when opening the driver with the config tool, theres no ISO setting... it's just like the original Raiderski driver...
Please help!
And THANKS to all you modding people!