Posted by lpachuong
On 2007-10-23 04:54:58, whatsucka wrote:
well b4 i upgrade to 9.2 is dat some sort of glitch in 9.0 dat cause so much noise in nite mode??
ok juz update to 9.2, yes the noise is been reduce a bit but still a lot using default settings in night mode
any help??
[ This Message was edited by: whatsucka on 2007-10-23 06:26 ]
[ This Message was edited by: whatsucka on 2007-10-23 07:18 ]
I just found that my driver doesn't have ENM and that is the reason why you get a lots of noise at night. If you want you can try this one. A4A-9.3: http://www.mediafire.com/?fmfyav0vzjy (reloaded) Nowadays I dont spend much time for modificating this drivers Moreover, I found that the slowier viewfinder is, the less noise you will have. A4A9.3 is for all fone. Have a nice day.
_________________
To be or not to be !!!
Please save our world. Save our world to save our lives and our generation.
There is no place as good as your house with your family. Home sweet home.
[ This Message was edited by: lpachuong on 2007-10-23 22:55 ]
Posted by chiliseo
can't download from that link
Edit: Now I can
thanks[ This Message was edited by: chiliseo on 2007-10-23 23:01 ]
Posted by don_gori
lpachuong GREAT WORK your new A4A-9.3 is just amaizing!!!Pics size is from 580 to 610kb and this is great
Soon I'll post some new tests and now I'll enjoying on your driver.I'm very happy right now.
Have a nice day to aLL
Posted by heiyei
@Lpachoung
bro,
Your work is really amazing(9.3) and now we have noise free pictures...though is low light and shadow areas we have some sort of noise grains...but overall its a new twist to our 2 MP phones...the colour is natural...but i think the contrast ar exposure is a bit high...cause i get over exposure in some cases and in rare cases the camera crashes...like detailed scene with lot of trees and forest scenes...i am also sorry that iam unable to post any pictures as my pc is faulty...thank you brother for you great contribution.GOOD LUCK!
Posted by Sombra
I not yet tested new Ipachuong A4A 9.3, but taked some shots using A4A 9.2 and is superb, now pics are sharpness at far objects.
Back of the glass
Phone used is K750i CID49 (R1BC002)
Sorry for my poor english.
Posted by Raiderski
i can bet that Sombra's phone has older (the better one) camera hardware (no matter of CID version)
Posted by Coquito
you re right, some cid49 k750, have the old camera module that cid36 had
Posted by mingwei
does a new w810 has a old camera module like in cid36?
Posted by mariusee
it is posiible to obtain 3 mp pics from k750 / w800 ? even interpolated..
Posted by Coquito
On 2007-10-24 20:47:11, mingwei wrote:
does a new w810 has a old camera module like in cid36?
yes
Posted by tranced
CID49 camera against CID36 camera - what Differences?
Posted by aabg
is there some way to see what module cam do i have without opening the phone?
i have a w810 cid50, i have my old k750 and i can change the module. you think boths are the same module o not?
i think they ared diferent, but i don't know...
Posted by tranced
if you ask me i'd say that you can open both phones and compare the two cams modules(and see the thread i linked above, then compare).
Posted by aabg
well I just do it, and both modules are the same
I thought it will be diferent
Posted by dukempg
[ This Message was edited by: dukempg on 2007-10-25 01:11 ]
Posted by Sombra
@Raiderski:
I not have conviction of which camera module is used for my phone and also ponder the possibility to possess oldest version, below, some of the best shots taked since my acquisition:
R1CA021 - Original Firmware Camdriver
Same local after minutes
Chengrong's 8.54 camdriver
Chengrong's 8.54 camdriver
Chengrong's 8.54 camdriver
Chengrong's 8.54 camdriver
Other shots taked with Ipachuong's A4A and Raiderski camdrivers not included in this post but posted before.
Phone is K750i CID49 R1CA021 for all pics.
Sorry for my poor english.
Posted by radicalgel
Shot taken at Mekedattu, Karnataka, India. No post processing, just cropped. Driver: SPU 1.3 beta 9, Sepia mode. Hope you guys like it..
Posted by whatsucka
juz update to 9.3
i realized normal mode n fine mode have a big difference in 9.3
fine mode makes picture super good!! loving it!! thanx lpachuong
Posted by 679
To all respective modders.
Is it possible to renew MANUAL FOCUS PREVIEW not for all zoom set (1.1-4), but only for zoom set (3.0-4).
I belive MFP is useless and waist time for zoom 1.1-2.9 coz it is not macro range.
I've attempt to edit camdriver for it but in I2C command there is no comparison "if A>B then bla-bla-bla", only "if A=B then bla-bla-bla"...
THX
BTW 21.92 IMHO is best for fast and incredible shooting-
Vagrant under the rain
[ This Message was edited by: 679 on 2007-10-25 08:34 ]
Posted by whatsucka
to me i think this is pretty new in 9.3 because i use to use raider 6.5 but fine and normal mode give no difference
micro+night+normal
micro+night+fine
normal mode
fine mode
Posted by wickedsick
Change your glasses or monitor. It is clear that Fine mode gives less noise than in Normal mode in A4A - 9.3. It also takes awsome pictures for outdoor scences. I have no problem with A4A - 9.99/10
Posted by radicalgel
Guess people have become too busy to acknowledge posts anymore... I'm done with the whole cam driver thing. Been using one driver for ages now and it has really served me well. I guess if ya go away for a few months then ur out... Even a guy like SPU whos done amazing things wrt camdriver modding was not even acknowledged when he returned after many months and posted a java exif viewer several weeks ago. I won't be posting here anymore so happy modding.
Big thanks to raider for his awesome work here and to guys like Lpachong, SPU, krio, cheng and sarmad who have all done great things. Sorry if i missed anyone out but it's prob cuz i don't know you.
Posted by whatsucka
wat u mean change my glasses or monitor??
Posted by don_gori
Hello everyone
today I made one test on new lpachuong's cam driver 9.3
I'm very impressed by pics quality and bright colours .... just perfect
Great job lpachuong !!!
And now here is the test(all pics are made with mine k750 R1CA021 cid49)
http://geromessi.data.bg/Test.rar
Waiting for your questions
and have a nice day ot everybody
Posted by Sombra
@radicalgel
The photo of tree is really an artwork!
[ This Message was edited by: Sombra on 2007-10-25 17:54 ]
Posted by mingwei
hi there.. im getting myselfa w810 soon, but before i make the purchase, can some one comfirm with me a latest brand new W810 has the same old better camera module like cid 36? thank you
Posted by dukempg
On 2007-10-25 09:57:02, whatsucka wrote:
to me i think this is pretty new in 9.3 because i use to use raider 6.5 but fine and normal mode give no difference
On Ridersky driver Fine and Normal only affect compression (85%/90%). You can enable Enhanced mode by changing EV +0.7/Zoom 1.1
On A4A Fine mode enables Enhanced mode. You can make Ridersky driver work this way (i.e., enable enhanced mode using Normal/Fine selection) bny using the supplied config tool.
Posted by mariusee
On 2007-10-25 05:56:31, radicalgel wrote:
Shot taken at Mekedattu, Karnataka, India. No post processing, just cropped. Driver: SPU 1.3 beta 9, Sepia mode. Hope you guys like it..
great photo !!! realy great. congratulations !
Posted by lpachuong
Hello everyone. How are you doing? It is nice to see this thread is still busy will many posts. It is quite quiet without Raidersky, Darkmagician, Power_Vano and some other friends
Wish everyone has a nice eveing.
On 2007-10-25 10:26:28, whatsucka wrote:
whatsucka: In normal mode, the pictures will be saved more quickly and have more noise whereas in fine mode you will get higher compression and less noise. Normal mode is good to use with MXE-60.
Thank you everyone for testing A4A-9.3
Posted by Sombra
Some pics taked with K750i CID49 (R1BC002) and Raiderski 6.6 camdriver modified using Config Tool (Sharpness increase of 0 to 6).
(All shots with focus to infinity and EM)
Raiderski 6.6
Raiderski 6.6
Raiderski 6.6
Raiderski 6.6
For comparison, photos taked with Chengrong's 8.54 (sharpness unknown)
Chengrong's 8.54 camdriver
Chengrong's 8.54 camdriver
Chengrong's 8.54 camdriver
This is my final test about sharpness and my quest is:
In others K750i CID49 using sharpness 6 the result is similar?
[ This Message was edited by: Sombra on 2007-10-25 19:01 ]
Posted by tommymar
lpachuong: lpachuong, your new 9.3's compression is not the same as 9.2 compression on w810i. Can you put the old code of the compression for w810i so that it can take the best quality of high compression? Anyways, your 9.3 is brilliant. I can see less noise and the sharpness is improved significantly. Moreover, congratulation for your 500+ post
Posted by Sombra
@Ipachuong:
Great work with your new driver, A4A 9.3 is very good.
Shot taked with infinitive focus and spot photometry:
Thanks to all camdriver modders.
Sorry for my poor english.
Posted by Milu
anyone know how i can make print screen from my phone. i mean that i wotn to make screen from my k750 in walkman for example
Posted by markztrance
hello.. im new in this post.
i have my camera driver 8.54 in my R1DB001 k750i..
i've experienced some bugs in the cam driver and that is the auto focus sometimes not responding on my phone..
can someone solve my problem plz...
Posted by strong
My new improved version SuperFunction v5.6 by Strong
download here http://www.sendspace.com/file/5w7poj
EDIT:v5.6 here with profile always shot with ISO 100 (EV-2.0/ZOOM1.3)
for friend milu http://www.sendspace.com/file/mzp0du
COPY camdriver0.dat FILE TO IFS/SETTINGS/CAMERA
------------------------------------------------------------------
HOW TO USE SuperFunction:
SuperFunction automatic always on.
Works in normal and fine mode.
Fine mode=improved Fine mode-enchanced ON.
Normal mode= Improved Fine mode-enchanced OFF.
There is no Normal mode.
Macro is for macro shots only.
Set the EV setting using joystick then
use the Zoom keys to change the value.
You can see the changes in the viewfinder preview.
-2.0: PROFILE (1.0 Auto 1.1 "Low Light" 1.2 "Cloudy Outdoors")
-1.7: SPOT photometry (1.0 off 1.1 on)
-1.3: CHANGE Scene (1.1 Portrait-1.2 Landscape-1.3 Twilight Portrait-1.4 Twilight Landscape- 1.5 Sports-1.6 Beach/Snow-1.7Document)
-1.0: ZOOM
-0.7: BRIGHTNESS
-0.3: ORIGINAL EV (Original +/- joystick)
0.0: FOCUS (1.0 is auto,1.1 infinite / 1.2 half press shuter manual focus 1.3-4.0 )
+0.3: EXPOSURE(decrease/increase 1.1- 2.0 Normal -3.5)
+0.7: SHUTTER SPEED(1/5000s - 1/6s)1.1-4.0 increase/decrease speed viewfinder preview.
+1.0: SATURATION manual (1.1 default 1.2-4.0 decrease/increase)
+1.3: WHITE BALANCE BLUE(1.1-4.0 add blue)
+1.7: WHITE BALANCE WELLOW(1.1-4.0 add yellow)
+2.0: WHITE BALANCE GREEN-RED(1.1-2.5 add green 2.5-4.0 add red)
All Super Functions is also available in Video mode.
The driver has manualy lock/unlock exposure
is usefully when takes photos indoors and some outdoors to avoid high overexprosure
works only in infinite mode (EV 0.0 +/- zoom 1.1)move the camera to get the desired light press half shot and hold it to lock exprosure then move the camera to the object and take the photo.
The driver has customize fanctions if you want
open the camdriver0.dat with notepad and see the EDITING FUNCTIONS by USER and first codes if you wish can change the default
SHARPNESS-SATURATION-BRIGHTNESS-CONTRAST-EXPOSURE-SHUTTER SPEED FOR LED-NORMAL SHUTTER SPEED
and ENCHANCED NIGHT SPEED Also JPEG COMPRESS For FINE And NORMAL and ZOOM.
ALSO YOU CAN ADD OR REMOVE FUNCTIONS IN CUSTOMIZE FUNCTIONS MENU to do that open camdriver0.dat with notepad.
There is additional Functions: manual ISO 1.0 is Auto 1.1-2.3 manual
- Contrast - Green - Magenta - Effects(black&white,solarize,negative,sepia).
Easy to use copy paste to FUNCTIONS MENU.
TIPS:
For Nightsthots better use manual Speed Shot is faster than Nightmode.
In good daylight outdoor shots use Normal mode.
In low Light conditions and indoors shots use Enchanced mode and "Low Light" profile.
Always use manual White Balance function for better results.
ADD IN v5.6:
Profiles-Magenta-Green-
CUSTOMIZE FUNCTION LIST for easy customize function in CUSTOMIZE FUNCTIONS MENU.
Custom ZOOM choose between 4x,6x,16x in
EDITING FUNCTIONS by USER menu.
FIX IN v5.6:
Reset problem in Night Mode.
IMPROVE IN v5.6:
Focus-Jpeg quality-macro for better adjust.
Good Luck
Strong!!!!
_________________
k750@w800 R1BC002 www.camdrivers.wz.cz/
[ This Message was edited by: strong on 2007-10-26 20:36 ]
[ This Message was edited by: strong on 2007-10-27 10:01 ]
Posted by primaru
i did not have time to read all of the last pages...so
...
what i understand is that in low light conditions if you have shrpness set to 0 the picture will be better...correct me if i'm wrong...
well... my question is :
can we put a function in drivers so we could alterate the sharpness depending on the light conditions???????
i don't know if this was asked before... so i'm sorry if i bugged you all...
thx !!!
Posted by chiliseo
as far as i know, in low light conditions if you set sharpness to 0 you will get a little blured picture... but then you can apply a noise reduction and sharpen metod and you will get a better picture compared to sharpness 5 or 6
you can do a profile on A4A driver for low light conditions and include CMD(56,00), and then switch back to CMD(56,06) for all others profiles.
Posted by whatsucka
oo...MXE-60 too bad i dont have dat
Posted by markztrance
hey, where can i download the raider's 6.6 cam driver?? i try the mirror listed before, but theres nothing there..
Posted by dukempg
On 2007-10-26 23:01:21, chiliseo wrote:
as far as i know, in low light conditions if you set sharpness to 0 you will get a little blured picture... but then you can apply a noise reduction and sharpen metod and you will get a better picture compared to sharpness 5 or 6
Just to add, this happpens because when you sharpen the image with noise you also sharpen noise... So it becames more apparent, you get more artifacts and the noise gets hard to be removed. Noise removal programs (like neat image) also don`t sharpen what is identified as noise (so you don`t have to remove all noise and make the picture artificial to not sharpen noise.
you can do a profile on A4A driver for low light conditions and include CMD(56,00), and then switch back to CMD(56,06) for all others profiles.
This is a interesting idea. Could you give me more detail on how to do it?
Posted by markztrance
Hello to everyone...
ahmm.. to all who are familiar in using the A4A 9.3 cam driver...
Can anyone give some instructions on how to use it??
at present i have it in my phone but i dont knw how to use it..someone help na plz...
Posted by terminator17
On 2007-10-27 05:29:59, markztrance wrote:
Hello to everyone...
ahmm.. to all who are familiar in using the A4A 9.3 cam driver...
Can anyone give some instructions on how to use it??
at present i have it in my phone but i dont knw how to use it..someone help na plz...
Guide how to use 9.3
Supermode with functions as shown below:
EV:
o -2.0: Change GREEN
o -1.7: Change MAGENTA
o -1.3: Change blue
o -1.0: Change yellow
o -0.7: change zoom
o -0.3: change iso
o 0.0: focus: 1.0 auto 1.1 infinitive 1.2-4.0
o +0.3: change exposure: EM/ENM is ready. read exposure information below.
o +0.7: light metering/spot: 1.0 - no spot 1.1 spot on
o +1.0: change shutter speed (1/5000' - 1/6' with daylight, 1/5 to 2' or more at night/low light)
o +1.3: change flicker(refresh rate 50hz/60hz)
o +1.7: Change scene: 1.0: normal ,1.1 Portrait,1.2 Landscape,1.3 Nightportrait,1.4 Nightscene,1.5 sports,1.6 Beach/snow, 1.7 Document,1.8 Manual Exposure Scene.
o +2.0: Profile
ZOOM 1.1: reduce overexposure cases for indoor
ZOOM 1.2: for taking pictures of buildings at long distance with contrast=02
ZOOM 1.3: close-up shot
ZOOM 1.4-1.6: different colour profile. If you get blueish/yellowish pictures then change the colour profile for correct colour
ZOOM 1.7: max zoom for infinity shot.
Posted by Raiderski
markztrance
www.tinyurl.com/ysc2wm
Posted by dragonball75
Hi to all , I've just read also every single page of the thread ... (obiovsly an hard thing ...) , so I wanna thanks all the modders for spending all their time for make their drivers best and best again .. I've tried almost every driver posted and the one for me is surely Raidersky's 6.6 one , but it's a little bit too complicate for me ... so could I ask for a little guide about it (with some pics to show the difference between the functions will be really a superb one ...) ?
My phone is a K750i CID36 - RCA021 inside .
Thanks again to all
Posted by Sombra
And more shots taked with Ipachuong A4A 9.3 camdriver.
Phone used is a K750i CID49 (R1CA021)
Focus to infinity - EM On
Highway, inside of car (back of glass window) running at ~80km/h.
Same configuration and condition.
Same configuration and condition.
Autofocus - EM On
Inside forest, complex image (original size is 604KB - Color count: 457.538)
Foliage in same configuration
Sorry for my poor english.
[ This Message was edited by: Sombra on 2007-10-27 16:40 ]
Posted by Milu
great thx for U strong and big beer for it..
Everyone who know just a little polish language. I wont invite you for forum about camdrivers.
www.camdrivers.xad.pl
Posted by whatsucka
wat is the FPS for video in the 9.3 camdriver??
Posted by mikilove
what is the best cam driver for my k750i?
Posted by markztrance
[quote]
On 2007-10-28 02:10:12, mikilove wrote:
what is the best cam driver for my k750i?
>>> thats up to you... if you want to capture manual settings, you can use the camdriver which supports the super mode.. if you want auto, try Ipachuong's 8.52,53 or i recommend thet 8.54
Posted by chiliseo
On 2007-10-27 04:56:22, dukempg wrote:
This is a interesting idea. Could you give me more detail on how to do it?
Well... basically you have this code on every A4A driver:
SET_PROFILE=$b6 00 4 1 #CMD(04,00)
$c0 0a
$s0 0a #CC_GREEN
$s0 0a #CC_MAGENTA
$s0 0a #CC_BLUE
$s0 0a #CC_YELLOW
$s0 0a #CHANGE_ZOOM
$s0 0a #ISO
$s0 0a #CHANGE_FOCUS
$s0 0a #SET_EXPOSURE
$s0 0a #SPOT_ON
$s0 0a #SHUTTERSPEED
$s0 0a #SHUTTER_ISO
$s0 0a #SCENE
$s0 0a #SET_PROFILE
#CC_CID #INIT
$cl
$c0 0b
(PROFILE 1.1)
$cl
$c0 0c
(PROFILE 1.2)
$cl
$c0 0d
(PROFILE 1.3)
$cl
$c0 0e
(PROFILE 1.4)
$cl
$c0 0f
(PROFILE 1.5)
$cx $cx $cx $cx $cx $cx;
And then, the code for PROFILE 1.1 for sharpness 0 on low light conditions could be this single line:
#CMD(56,00)
If you want also to increase a little bit the exposure time on that profile you could add this line too:
#CMD(04,1B)
Then in PROFILE 1.2 you can add this lines to switch back to default values:
#CMD(56,06)
#CMD(04,00)
Anyway when you select de default profile (1.0) the driver switch back to all default values.